HDF5 file, superblock version 0
group /
	attribute Conventions = "COARDS, CF-1.7, ACDD-1.3"
	attribute acknowledgement = "n/a"
	attribute agency = "IOS, Ocean Sciences Division, Sidney, B.C."
	attribute cdm_data_type = "Profile"
	attribute cdm_profile_variables = ""
	attribute comment = "Data converted from IOS ASCII format"
	attribute country = "Canada"
	attribute creator_email = "info@hakai.org"
	attribute creator_name = "Hakai Insitute"
	attribute creator_url = "http://www.hakai.org"
	attribute date_created = "2023-06-21 21:06:57UTC"
	attribute featureType = "profile"
	attribute filename = "2016-007-0066.ctd"
	attribute geospatial_bounds = "POINT (-123.77633333333333, 49.36233333333333)"
	attribute geospatial_lat_max = 49.36233333333333
	attribute geospatial_lat_min = 49.36233333333333
	attribute geospatial_lon_max = -123.77633333333333
	attribute geospatial_lon_min = -123.77633333333333
	attribute header = (text block)
| {
| "FILE": {
| "START TIME": " UTC 2016/06/18 15:25:18.000\n",
| "TIME INCREMENT": " 0 0 0 0.416667E-01 0  ! (day hr min sec ms)\n",
| "NUMBER OF RECORDS": " 103\n",
| "DATA DESCRIPTION": " CTD\n",
| "FILE TYPE": " ASCII\n",
| "CRC": " 6B69DA72\n",
| "NUMBER OF CHANNELS": " 11\n",
| "$TABLE: CHANNELS": [
| "    ! No Name                        Units           Minimum        Maximum\n",
| "    !--- --------------------------- --------------- -------------- --------------\n",
| "       1 Pressure                    decibar         3.288          104.78\n",
| "       2 Temperature:Secondary       'deg C (ITS90)' 9.1152         17.2243\n",
| "       3 Transmissivity              %/metre         29.7           60.1\n",
| "       4 Fluorescence:URU:Seapoint   mg/m^3          0.99E-01       3.177\n",
| "       5 PAR                         uE/m^2/sec      0              79.151\n",
| "       6 PAR:Reference               uE/m^2/sec      214.56         220.52\n",
| "       7 pH:SBE:Nominal              n/a             7.711          8.41\n",
| "       8 Salinity:T1:C1              PSS-78          22.9217        30.2207\n",
| "       9 Oxygen:Dissolved:SBE        mL/L            4.151          6.734\n",
| "      10 Oxygen:Dissolved:SBE        umol/kg         181.0952       295.0526\n",
| "      11 Number_of_bin_records       n/a             8              26\n"
| ],
| "$TABLE: CHANNEL DETAIL": [
| "    ! No  Pad   Start  Width  Format  Type  Decimal_Places\n",
| "    !---  ----  -----  -----  ------  ----  --------------\n",
| "       1  -99   ' '        7  F       ' '     1\n",
| "       2  -99   ' '        9  F       ' '     4\n",
| "       3  -99   ' '        6  F       ' '     1\n",
| "       4  -99   ' '        8  F       ' '     3\n",
| "       5  -99   ' '        7  F       ' '     1\n",
| "       6  -99   ' '        7  F       ' '     1\n",
| "       7  -99   ' '        8  F       ' '     3\n",
| "       8  -99   ' '        9  F       ' '     4\n",
| "       9  -99   ' '        7  F       ' '     2\n",
| "      10  -99   ' '        6  F       ' '     1\n",
| "      11  -99   ' '        5  I       I       0\n"
| ],
| "$REMARKS": [
| "        This file converted from Sea-Bird file: P:\\Cruise_Data_Processing\\2016-07\\Pro\n"
| ]
| },
| "ADMINISTRATION": {
| "MISSION": " 2016-07\n",
| "AGENCY": " IOS, Ocean Sciences Division, Sidney, B.C.\n",
| "COUNTRY": " Canada\n",
| "PROJECT": " Strait of Georgia Water Properties Survey\n",
| "SCIENTIST": " Chandler P.\n",
| "PLATFORM": " Vector\n"
| },
| "LOCATION": {
| "GEOGRAPHIC AREA": " Strait of Georgia / Juan de Fuca Strait\n",
| "STATION": " 275\n",
| "EVENT NUMBER": " 66\n",
| "LATITUDE": "  49  21.74000 N  ! (deg min)\n",
| "LONGITUDE": " 123  46.58000 W  ! (deg min)\n",
| "WATER DEPTH": " 108\n",
| "ALTIMETER (M)": " 2.56                                  ! custom item\n",
| "$REMARKS": [
| "        Altimeter value is distance from bottom and is calculated as the\n",
| "        median of the deepest 2 metres of data.\n"
| ]
| },
| "INSTRUMENT": {
| "TYPE": " Sea-Bird CTD\n",
| "MODEL": " SBE-911plus\n",
| "SERIAL NUMBER": " 0550\n",
| "$TABLE: SENSORS": [
| "    !   Name                                 Abs Depth       Serial No\n",
| "    !   -----------------------------------  --------------  ----------\n",
| "        Temperature                          ' '             4484\n",
| "        Conductivity                         ' '             1766\n",
| "        'Pressure:Digiquartz with TC'        ' '             0550\n",
| "        Temperature:2                        ' '             4054\n",
| "        Conductivity:2                       ' '             3531\n",
| "        'Oxygen:SBE 43'                      ' '             1119\n",
| "        Fluorometer:Seapoint                 ' '             3865\n",
| "        'Transmissometer:WET Labs C-Star'    ' '             1396DR\n",
| "        Altimeter                            ' '             1253\n",
| "        pH                                   ' '             0692\n",
| "        PAR/Irradiance:Biospherical/Licor    ' '             '4565  QSP200L4S'\n",
| "        Unavailable                          ' '             ' '\n"
| ],
| "$REMARKS": [
| "        SOFTWARE VERSION SEASAVE V 7.23.1\n"
| ]
| },
| "HISTORY": {
| "2": "    $TABLE: PROGRAMS",
| "3": "    !   Name     Vers   Date       Time     Recs In   Recs Out",
| "4": "    !   -------- ------ ---------- -------- --------- ---------",
| "5": "        SBE_IOS  3.5    2016/10/03 09:09:21      5588      5588",
| "6": "        CLEAN    5.2.1  2016/10/03 09:44:27      5588      5588",
| "7": "        SHIFTDAT 3.2a   2016/10/03 13:25:30 ?         ?",
| "8": "        SHIFTDAT 3.2a   2016/10/03 15:01:58 ?         ?",
| "9": "        SHIFTDAT 3.2a   2016/10/03 16:27:49 ?         ?",
| "10": "        SHIFTDAT 3.4    2016/10/03 16:32:45      5588      5588",
| "11": "        DELETE   6.1    2016/10/03 16:36:27      5588      2278",
| "12": "        CTDEDIT  5.2.1  2016/10/04 17:01:53      2278      2175",
| "13": "        CALIB    11.9   2016/10/07 13:12:50      2175      2175",
| "14": "        FILTERS  4.3    2016/10/07 16:03:57      2175      2175",
| "15": "        BINAVE   4.2    2016/10/07 16:06:24      2175       103",
| "16": "        REMOVECH 8.2    2016/10/07 16:07:22       103       103",
| "17": "        CHGUNITS 3.1.1  2016/10/07 16:07:52       103       103",
| "18": "        REORDER  1.3.1  2016/10/11 09:19:56 ?         ?",
| "19": "        HDREDIT2 3.0.2  2016/10/11 09:22:24 ?         ?",
| "20": "    $END",
| "21": "    $REMARKS",
| "22": "        -CLEAN functions: 2016/10/03 09:41:57 20",
| "23": "         Reset #RECS, MIN & MAX values in header.",
| "24": "         Interpolation by   Record Number, in Pressure",
| "25": "         Set event to last  4 characters of file name",
| "26": "        -The following SHIFT parameters were used.",
| "27": "         Shift Channel: Fluorescence:URU:Seapoint [mg/m^3]",
| "28": "         # of Records to Advance (-ve for Delay):",
| "29": "         At REC#     0 Shift= 24.00",
| "30": "        -The following SHIFT parameters were used.",
| "31": "         Shift Channel: Conductivity:Primary",
| "32": "         # of Records to Advance (-ve for Delay):",
| "33": "         At REC#     0 Shift= -0.50",
| "34": "         Salinity was recalculated after shift",
| "35": "        -The following SHIFT parameters were used.",
| "36": "         Shift Channel: Conductivity:Secondary",
| "37": "         # of Records to Advance (-ve for Delay):",
| "38": "         At REC#     0 Shift= -0.80",
| "39": "         Salinity was recalculated after shift",
| "40": "        -The following SHIFT parameters were used.",
| "41": "         Shift Channel: pH:SBE",
| "42": "         # of Records to Advance (-ve for Delay):",
| "43": "         At REC#     0 Shift= 70.00",
| "44": "        -The following DELETE parameters were used:",
| "45": "         Surface Record Removal: Last Press Min",
| "46": "           Maximum Surface Pressure (relative):      10.00",
| "47": "           Surface Swell Pressure Tolerance:       1.00",
| "48": "         Pressure filtered over width:   15",
| "49": "         Swells deleted. Warning message if pressure difference of      2.00",
| "50": "         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.",
| "51": "         Drop rate applies in the range    10.00 to    49.58 dbars",
| "52": "         Sample interval (from FILE section of header) =     0.042 seconds.",
| "53": "        -CTDEDIT  v5.2.1   2016/10/04 17:01:53",
| "54": "            103 records were deleted in this editing session.",
| "55": "             19 changes in channel Salinity:T1:C1",
| "56": "        -CALIB parameters: 2016/10/07 13:12:50",
| "57": "         Calibration type = Correct",
| "58": "         Mode: ONLY - calibration specs from Cal File only.",
| "59": "         Calibration file = P:\\Cruise_Data_Processing\\2016-07\\Processing\\doc\\2016-07-recal1.CCF",
| "60": "         Calibrations applied:",
| "61": "         Ch Name                          Units    Fmla Coefficents",
| "62": "         -- ----------------------------- --------- --- -----------------------------",
| "63": "         18 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1016800E+01",
| "64": "        -The following FILTER parameters were used.",
| "65": "         Median filter was used.",
| "66": "         Filter width =   11",
| "67": "         The following channel(s) were filtered.",
| "68": "           Fluorescence:URU:Seapoint",
| "69": "        -The following BINAVE parameters were used:",
| "70": "         Bin channel = Pressure",
| "71": "         Averaging interval =    1.00",
| "72": "         Minimum bin value =       0.000",
| "73": "         Average value was used",
| "74": "         Interpolated values were NOT used for empty bins",
| "75": "         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.",
| "76": "        -REMOVECH 2016/10/07 16:07:22",
| "77": "         The following CHANNEL(S) were removed:",
| "78": "          Scan_Number",
| "79": "          Temperature:Primary [deg C (ITS90)]",
| "80": "          Conductivity:Primary [S/m]",
| "81": "          Conductivity:Secondary [S/m]",
| "82": "          Oxygen:Voltage:SBE [volts]",
| "83": "          Altimeter [metres]",
| "84": "          Descent_Rate [m/s]",
| "85": "          Status:Pump",
| "86": "          Salinity:T0:C0 [PSS-78]",
| "87": "          Flag",
| "88": "        -CHANGE units:",
| "89": "         Temperature reference channel: Temp*",
| "90": "         Salinity    reference channel: Sal*",
| "91": "         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg",
| "92": "        -HEADER EDITS: 2016/10/11 09:22:24",
| "93": "         Applied edit header: P:\\Cruise_Data_Processing\\2016-07\\Processing\\doc\\2016-07-hdr.txt",
| "94": "         Channel  1: Pressure [decibar]",
| "95": "           Format: F11.2 ==> F7.1",
| "96": "         Channel  5: PAR [uE/m^2/sec]",
| "97": "           Format: F11.3 ==> F7.1",
| "98": "         Channel  9: Oxygen:Dissolved:SBE [mL/L]",
| "99": "           Format: F8.3 ==> F7.2",
| "100": "         Channel  6: PAR:Reference [uE/m^2/sec]",
| "101": "           Format: F11.3 ==> F7.1",
| "102": "         Channel  7: pH:SBE:Nominal [n/a]",
| "103": "           Name:   pH:SBE ==> pH:SBE:Nominal",
| "104": "           Units:  pH Units ==> n/a",
| "105": "         Channel 11: Number_of_bin_records [n/a]",
| "106": "           Pad:    ' ' ==> -99",
| "107": "    $END"
| },
| "COMMENTS": {
| "1": "    SBE HEADER",
| "2": "      Sea-Bird SBE 9 Data File:",
| "3": "      FileName = C:\\CTD Data\\2016-07\\2016-07-0066.hex",
| "4": "      Software Version Seasave V 7.23.1",
| "5": "      Temperature SN = 4484",
| "6": "      Conductivity SN = 1766",
| "7": "      Number of Bytes Per Scan = 40",
| "8": "      Number of Voltage Words = 5",
| "9": "      Number of Scans Averaged by the Deck Unit = 1",
| "10": "      System UpLoad Time = Jun 18 2016 08:26:45",
| "11": "      NMEA Latitude = 49 21.74 N",
| "12": "      NMEA Longitude = 123 46.58 W",
| "13": "      NMEA UTC (Time) = Jun 18 2016  15:25:18",
| "14": "      Store Lat/Lon Data = Append to Every Scan",
| "15": "      SBE 11plus V 5.1e",
| "16": "      number of scans to average = 1",
| "17": "      pressure baud rate = 9600",
| "18": "      NMEA baud rate = 4800",
| "19": "      surface PAR voltage added to scan",
| "20": "      A/D offset = 5",
| "21": "      Latitude/Longitude added to scan",
| "22": "      GPIB address = 1",
| "23": "      advance primary conductivity  0.073 seconds",
| "24": "      advance secondary conductivity  0.073 seconds",
| "25": "      advance voltage 6  0.000 seconds",
| "26": "      advance voltage 7  0.000 seconds",
| "27": "      S>",
| "28": "       Vector: 2016-07",
| "29": "       Station: 275",
| "30": "       Depth: 111",
| "31": "      System UTC = Jun 18 2016 15:26:45",
| "32": "    # nquan = 19",
| "33": "    # nvalues = 5588",
| "34": "    # units = specified",
| "35": "    # name 0 = scan: Scan Count",
| "36": "    # name 1 = prDM: Pressure, Digiquartz [db]",
| "37": "    # name 2 = t090C: Temperature [ITS-90, deg C]",
| "38": "    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]",
| "39": "    # name 4 = c0S/m: Conductivity [S/m]",
| "40": "    # name 5 = c1S/m: Conductivity, 2 [S/m]",
| "41": "    # name 6 = CStarTr0: Beam Transmission, WET Labs C-Star [%]",
| "42": "    # name 7 = flSP: Fluorescence, Seapoint",
| "43": "    # name 8 = sbeox0V: Oxygen raw, SBE 43 [V]",
| "44": "    # name 9 = par: PAR/Irradiance, Biospherical/Licor",
| "45": "    # name 10 = spar: SPAR/Surface Irradiance",
| "46": "    # name 11 = ph: pH",
| "47": "    # name 12 = altM: Altimeter [m]",
| "48": "    # name 13 = dz/dtM: Descent Rate [m/s]",
| "49": "    # name 14 = pumps: Pump Status",
| "50": "    # name 15 = sal00: Salinity, Practical [PSU]",
| "51": "    # name 16 = sal11: Salinity, Practical, 2 [PSU]",
| "52": "    # name 17 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 1",
| "53": "    # name 18 = flag: flag",
| "54": "    # span 0 =          1,       5588",
| "55": "    # span 1 =      2.190,    105.098",
| "56": "    # span 2 =     9.1133,    17.2721",
| "57": "    # span 3 =     9.1128,    17.2720",
| "58": "    # span 4 =   3.053482,   3.310105",
| "59": "    # span 5 =   3.043717,   3.311016",
| "60": "    # span 6 =    73.5914,    88.0776",
| "61": "    # span 7 = 9.7680e-02, 4.3346e+00",
| "62": "    # span 8 =     1.8681,     3.0830",
| "63": "    # span 9 = 1.0000e-12, 1.0930e+02",
| "64": "    # span 10 = 2.1058e+02, 2.2250e+02",
| "65": "    # span 11 =      7.684,      8.411",
| "66": "    # span 12 =       0.00,     100.00",
| "67": "    # span 13 =     -1.295,      1.269",
| "68": "    # span 14 =          0,          1",
| "69": "    # span 15 =    22.7547,    30.2203",
| "70": "    # span 16 =    22.7447,    30.2221",
| "71": "    # span 17 =     4.0598,     7.3467",
| "72": "    # span 18 = 0.0000e+00, 0.0000e+00",
| "73": "    # interval = seconds: 0.0416667",
| "74": "    # start_time = Jun 18 2016 15:25:18 [NMEA time, header]",
| "75": "    # bad_flag = -9.990e-29",
| "76": "    # <Sensors count=\"15\" >",
| "77": "    #   <sensor Channel=\"1\" >",
| "78": "    #     <!-- Frequency 0, Temperature -->",
| "79": "    #     <TemperatureSensor SensorID=\"55\" >",
| "80": "    #       <SerialNumber>4484</SerialNumber>",
| "81": "    #       <CalibrationDate>18-Dec-14</CalibrationDate>",
| "82": "    #       <UseG_J>1</UseG_J>",
| "83": "    #       <A>0.00000000e+000</A>",
| "84": "    #       <B>0.00000000e+000</B>",
| "85": "    #       <C>0.00000000e+000</C>",
| "86": "    #       <D>0.00000000e+000</D>",
| "87": "    #       <F0_Old>0.000</F0_Old>",
| "88": "    #       <G>4.39931830e-003</G>",
| "89": "    #       <H>6.40333195e-004</H>",
| "90": "    #       <I>2.14332102e-005</I>",
| "91": "    #       <J>1.81777421e-006</J>",
| "92": "    #       <F0>1000.000</F0>",
| "93": "    #       <Slope>1.00000000</Slope>",
| "94": "    #       <Offset>0.0000</Offset>",
| "95": "    #     </TemperatureSensor>",
| "96": "    #   </sensor>",
| "97": "    #   <sensor Channel=\"2\" >",
| "98": "    #     <!-- Frequency 1, Conductivity -->",
| "99": "    #     <ConductivitySensor SensorID=\"3\" >",
| "100": "    #       <SerialNumber>1766</SerialNumber>",
| "101": "    #       <CalibrationDate>20-Aug-14</CalibrationDate>",
| "102": "    #       <UseG_J>1</UseG_J>",
| "103": "    #       <!-- Cell const and series R are applicable only for wide range sensors.",
| "104": "     -->",
| "105": "    #       <SeriesR>0.0000</SeriesR>",
| "106": "    #       <CellConst>2000.0000</CellConst>",
| "107": "    #       <ConductivityType>0</ConductivityType>",
| "108": "    #       <Coefficients equation=\"0\" >",
| "109": "    #         <A>0.00000000e+000</A>",
| "110": "    #         <B>0.00000000e+000</B>",
| "111": "    #         <C>0.00000000e+000</C>",
| "112": "    #         <D>0.00000000e+000</D>",
| "113": "    #         <M>0.0</M>",
| "114": "    #         <CPcor>-9.57000000e-008</CPcor>",
| "115": "    #       </Coefficients>",
| "116": "    #       <Coefficients equation=\"1\" >",
| "117": "    #         <G>-4.12823288e+000</G>",
| "118": "    #         <H>4.88293788e-001</H>",
| "119": "    #         <I>-6.13168477e-004</I>",
| "120": "    #         <J>5.30399930e-005</J>",
| "121": "    #         <CPcor>-9.57000000e-008</CPcor>",
| "122": "    #         <CTcor>3.2500e-006</CTcor>",
| "123": "    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->",
| "124": "    #         <WBOTC>0.00000000e+000</WBOTC>",
| "125": "    #       </Coefficients>",
| "126": "    #       <Slope>1.00000000</Slope>",
| "127": "    #       <Offset>0.00000</Offset>",
| "128": "    #     </ConductivitySensor>",
| "129": "    #   </sensor>",
| "130": "    #   <sensor Channel=\"3\" >",
| "131": "    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->",
| "132": "    #     <PressureSensor SensorID=\"45\" >",
| "133": "    #       <SerialNumber>0550</SerialNumber>",
| "134": "    #       <CalibrationDate>17-Dec-14</CalibrationDate>",
| "135": "    #       <C1>-4.232943e+004</C1>",
| "136": "    #       <C2>1.065076e-001</C2>",
| "137": "    #       <C3>1.464900e-002</C3>",
| "138": "    #       <D1>3.694200e-002</D1>",
| "139": "    #       <D2>0.000000e+000</D2>",
| "140": "    #       <T1>3.041883e+001</T1>",
| "141": "    #       <T2>-3.536199e-004</T2>",
| "142": "    #       <T3>4.388420e-006</T3>",
| "143": "    #       <T4>2.583800e-009</T4>",
| "144": "    #       <Slope>1.00002764</Slope>",
| "145": "    #       <Offset>0.67335</Offset>",
| "146": "    #       <T5>0.000000e+000</T5>",
| "147": "    #       <AD590M>1.286170e-002</AD590M>",
| "148": "    #       <AD590B>-9.445820e+000</AD590B>",
| "149": "    #     </PressureSensor>",
| "150": "    #   </sensor>",
| "151": "    #   <sensor Channel=\"4\" >",
| "152": "    #     <!-- Frequency 3, Temperature, 2 -->",
| "153": "    #     <TemperatureSensor SensorID=\"55\" >",
| "154": "    #       <SerialNumber>4054</SerialNumber>",
| "155": "    #       <CalibrationDate>20-Aug-14</CalibrationDate>",
| "156": "    #       <UseG_J>1</UseG_J>",
| "157": "    #       <A>0.00000000e+000</A>",
| "158": "    #       <B>0.00000000e+000</B>",
| "159": "    #       <C>0.00000000e+000</C>",
| "160": "    #       <D>0.00000000e+000</D>",
| "161": "    #       <F0_Old>0.000</F0_Old>",
| "162": "    #       <G>4.38634996e-003</G>",
| "163": "    #       <H>6.44413405e-004</H>",
| "164": "    #       <I>2.32318430e-005</I>",
| "165": "    #       <J>2.13707967e-006</J>",
| "166": "    #       <F0>1000.000</F0>",
| "167": "    #       <Slope>1.00000000</Slope>",
| "168": "    #       <Offset>0.0000</Offset>",
| "169": "    #     </TemperatureSensor>",
| "170": "    #   </sensor>",
| "171": "    #   <sensor Channel=\"5\" >",
| "172": "    #     <!-- Frequency 4, Conductivity, 2 -->",
| "173": "    #     <ConductivitySensor SensorID=\"3\" >",
| "174": "    #       <SerialNumber>3531</SerialNumber>",
| "175": "    #       <CalibrationDate>06-Feb-13</CalibrationDate>",
| "176": "    #       <UseG_J>1</UseG_J>",
| "177": "    #       <!-- Cell const and series R are applicable only for wide range sensors.",
| "178": "     -->",
| "179": "    #       <SeriesR>0.0000</SeriesR>",
| "180": "    #       <CellConst>2000.0000</CellConst>",
| "181": "    #       <ConductivityType>0</ConductivityType>",
| "182": "    #       <Coefficients equation=\"0\" >",
| "183": "    #         <A>0.00000000e+000</A>",
| "184": "    #         <B>0.00000000e+000</B>",
| "185": "    #         <C>0.00000000e+000</C>",
| "186": "    #         <D>0.00000000e+000</D>",
| "187": "    #         <M>0.0</M>",
| "188": "    #         <CPcor>-9.57000000e-008</CPcor>",
| "189": "    #       </Coefficients>",
| "190": "    #       <Coefficients equation=\"1\" >",
| "191": "    #         <G>-1.02073624e+001</G>",
| "192": "    #         <H>1.56180514e+000</H>",
| "193": "    #         <I>-2.18950789e-003</I>",
| "194": "    #         <J>2.53511714e-004</J>",
| "195": "    #         <CPcor>-9.57000000e-008</CPcor>",
| "196": "    #         <CTcor>3.2500e-006</CTcor>",
| "197": "    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->",
| "198": "    #         <WBOTC>0.00000000e+000</WBOTC>",
| "199": "    #       </Coefficients>",
| "200": "    #       <Slope>1.00000000</Slope>",
| "201": "    #       <Offset>0.00000</Offset>",
| "202": "    #     </ConductivitySensor>",
| "203": "    #   </sensor>",
| "204": "    #   <sensor Channel=\"6\" >",
| "205": "    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->",
| "206": "    #     <OxygenSensor SensorID=\"38\" >",
| "207": "    #       <SerialNumber>1119</SerialNumber>",
| "208": "    #       <CalibrationDate>19-Dec-15</CalibrationDate>",
| "209": "    #       <Use2007Equation>1</Use2007Equation>",
| "210": "    #       <CalibrationCoefficients equation=\"0\" >",
| "211": "    #         <!-- Coefficients for Owens-Millard equation. -->",
| "212": "    #         <Boc>0.0000</Boc>",
| "213": "    #         <Soc>0.0000e+000</Soc>",
| "214": "    #         <offset>0.0000</offset>",
| "215": "    #         <Pcor>0.00e+000</Pcor>",
| "216": "    #         <Tcor>0.0000</Tcor>",
| "217": "    #         <Tau>0.0</Tau>",
| "218": "    #       </CalibrationCoefficients>",
| "219": "    #       <CalibrationCoefficients equation=\"1\" >",
| "220": "    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and",
| "221": "    later. -->",
| "222": "    #         <Soc>4.6004e-001</Soc>",
| "223": "    #         <offset>-0.5129</offset>",
| "224": "    #         <A>-3.1802e-003</A>",
| "225": "    #         <B> 1.7259e-004</B>",
| "226": "    #         <C>-3.0507e-006</C>",
| "227": "    #         <D0> 2.5826e+000</D0>",
| "228": "    #         <D1> 1.92634e-004</D1>",
| "229": "    #         <D2>-4.64803e-002</D2>",
| "230": "    #         <E> 3.6000e-002</E>",
| "231": "    #         <Tau20> 1.8700</Tau20>",
| "232": "    #         <H1>-3.3000e-002</H1>",
| "233": "    #         <H2> 5.0000e+003</H2>",
| "234": "    #         <H3> 1.4500e+003</H3>",
| "235": "    #       </CalibrationCoefficients>",
| "236": "    #     </OxygenSensor>",
| "237": "    #   </sensor>",
| "238": "    #   <sensor Channel=\"7\" >",
| "239": "    #     <!-- A/D voltage 1, Fluorometer, Seapoint -->",
| "240": "    #     <FluoroSeapointSensor SensorID=\"11\" >",
| "241": "    #       <SerialNumber>3865</SerialNumber>",
| "242": "    #       <CalibrationDate></CalibrationDate>",
| "243": "    #       <!-- The following is an array index, not the actual gain setting. -->",
| "244": "    #       <GainSetting>2</GainSetting>",
| "245": "    #       <Offset>0.000</Offset>",
| "246": "    #     </FluoroSeapointSensor>",
| "247": "    #   </sensor>",
| "248": "    #   <sensor Channel=\"8\" >",
| "249": "    #     <!-- A/D voltage 2, Transmissometer, WET Labs C-Star -->",
| "250": "    #     <WET_LabsCStar SensorID=\"71\" >",
| "251": "    #       <SerialNumber>1396DR</SerialNumber>",
| "252": "    #       <CalibrationDate>Feb 2nd 2016</CalibrationDate>",
| "253": "    #       <M>19.3228</M>",
| "254": "    #       <B>-0.0193</B>",
| "255": "    #       <PathLength>0.250</PathLength>",
| "256": "    #     </WET_LabsCStar>",
| "257": "    #   </sensor>",
| "258": "    #   <sensor Channel=\"9\" >",
| "259": "    #     <!-- A/D voltage 3, Free -->",
| "260": "    #   </sensor>",
| "261": "    #   <sensor Channel=\"10\" >",
| "262": "    #     <!-- A/D voltage 4, Altimeter -->",
| "263": "    #     <AltimeterSensor SensorID=\"0\" >",
| "264": "    #       <SerialNumber>1253</SerialNumber>",
| "265": "    #       <CalibrationDate></CalibrationDate>",
| "266": "    #       <ScaleFactor>15.000</ScaleFactor>",
| "267": "    #       <Offset>0.000</Offset>",
| "268": "    #     </AltimeterSensor>",
| "269": "    #   </sensor>",
| "270": "    #   <sensor Channel=\"11\" >",
| "271": "    #     <!-- A/D voltage 5, Free -->",
| "272": "    #   </sensor>",
| "273": "    #   <sensor Channel=\"12\" >",
| "274": "    #     <!-- A/D voltage 6, pH -->",
| "275": "    #     <pH_Sensor SensorID=\"43\" >",
| "276": "    #       <SerialNumber>0692</SerialNumber>",
| "277": "    #       <CalibrationDate>12-Jan-16</CalibrationDate>",
| "278": "    #       <Slope>4.6015</Slope>",
| "279": "    #       <Offset>2.5353</Offset>",
| "280": "    #     </pH_Sensor>",
| "281": "    #   </sensor>",
| "282": "    #   <sensor Channel=\"13\" >",
| "283": "    #     <!-- A/D voltage 7, PAR/Irradiance, Biospherical/Licor -->",
| "284": "    #     <PAR_BiosphericalLicorChelseaSensor SensorID=\"42\" >",
| "285": "    #       <SerialNumber>4565  QSP200L4S</SerialNumber>",
| "286": "    #       <CalibrationDate>16-Mar-2011</CalibrationDate>",
| "287": "    #       <M>1.00000000</M>",
| "288": "    #       <B>0.00000000</B>",
| "289": "    #       <CalibrationConstant>4115226337.44999980</CalibrationConstant>",
| "290": "    #       <Multiplier>1.00000000</Multiplier>",
| "291": "    #       <Offset>-0.36780000</Offset>",
| "292": "    #     </PAR_BiosphericalLicorChelseaSensor>",
| "293": "    #   </sensor>",
| "294": "    #   <sensor Channel=\"14\" >",
| "295": "    #     <!-- SPAR voltage, Unavailable -->",
| "296": "    #   </sensor>",
| "297": "    #   <sensor Channel=\"15\" >",
| "298": "    #     <!-- SPAR voltage, SPAR/Surface Irradiance -->",
| "299": "    #     <SPAR_Sensor SensorID=\"51\" >",
| "300": "    #       <SerialNumber>20518</SerialNumber>",
| "301": "    #       <CalibrationDate>21-MAR-2016</CalibrationDate>",
| "302": "    #       <ConversionFactor>1627.06600000</ConversionFactor>",
| "303": "    #       <RatioMultiplier>1.00000000</RatioMultiplier>",
| "304": "    #     </SPAR_Sensor>",
| "305": "    #   </sensor>",
| "306": "    # </Sensors>",
| "307": "    # datcnv_date = Sep 27 2016 13:44:35, 7.23.2 [datcnv_vars = 15]",
| "308": "    # datcnv_in = P:\\Cruise_Data_Processing\\2016-07\\RAW\\ctd\\2016-07-0066.hex P:\\Crui",
| "309": "    se_Data_Processing\\2016-07\\Processing\\doc\\2016-07-ctd.XMLCON",
| "310": "    # datcnv_skipover = 0",
| "311": "    # datcnv_ox_hysteresis_correction = no",
| "312": "    # wildedit_date = Sep 29 2016 13:34:37, 7.23.2",
| "313": "    # wildedit_in = P:\\Cruise_Data_Processing\\2016-07\\Processing\\convert\\2016-07-006",
| "314": "    6.cnv",
| "315": "    # wildedit_pass1_nstd = 2.0",
| "316": "    # wildedit_pass2_nstd = 5.0",
| "317": "    # wildedit_pass2_mindelta = 0.000e+000",
| "318": "    # wildedit_npoint = 50",
| "319": "    # wildedit_vars = prDM t090C t190C c0S/m c1S/m",
| "320": "    # wildedit_excl_bad_scans = yes",
| "321": "    # alignctd_date = Sep 29 2016 13:49:36, 7.23.2",
| "322": "    # alignctd_in = P:\\Cruise_Data_Processing\\2016-07\\Processing\\wildedit\\2016-07-00",
| "323": "    66.cnv",
| "324": "    # alignctd_adv = sbeox0V 2.500",
| "325": "    # celltm_date = Sep 29 2016 13:53:00, 7.23.2",
| "326": "    # celltm_in = P:\\Cruise_Data_Processing\\2016-07\\Processing\\align\\2016-07-0066.cn",
| "327": "    v",
| "328": "    # celltm_alpha = 0.0245, 0.0245",
| "329": "    # celltm_tau = 9.5000, 9.5000",
| "330": "    # celltm_temp_sensor_use_for_cond = primary, secondary",
| "331": "    # Derive_date = Sep 29 2016 13:55:48, 7.23.2 [derive_vars = 3]",
| "332": "    # Derive_in = P:\\Cruise_Data_Processing\\2016-07\\Processing\\celltm\\2016-07-0066.c",
| "333": "    nv P:\\Cruise_Data_Processing\\2016-07\\Processing\\doc\\2016-07-ctd.XMLCON",
| "334": "    # derive_time_window_docdt = seconds: 1",
| "335": "    # derive_ox_tau_correction = yes",
| "336": "    # file_type = ascii",
| "337": "     END*",
| "338": "    Remarks from CTDEDIT:",
| "339": "    CTDEDIT was used to remove some surface records and records corrupted by",
| "340": "     shed wakes near the bottom of the cast; salinity was cleaned.",
| "341": "    ---------------------------------------------------------------------------------",
| "343": "    Data Processing Notes:",
| "344": "    ----------------------",
| "346": "    Transmissivity, Fluorescence, PAR and PAR:Reference data are nominal and unedited",
| "347": "            except that some records were removed in editing temperature and salinity.",
| "349": "    For details on how the transmissivity calibration parameters were calculated",
| "350": "            see the document in folder \"\\cruise_data\\documents\\transmissivity\".",
| "352": "    NOTE: While the CTD fluorescence data are expressed in concentration units, they",
| "353": "            do not always compare well to extracted chlorophyll samples, particularly for",
| "354": "            casts far from shore. It is recommended that users check extracted chlorophyll",
| "355": "            values where available.",
| "357": "    Dissolved oxygen was calibrated using the method described in SeaBird",
| "358": "            Application Note #64-2, June 2012 revision, except that a small",
| "359": "            offset in the fit was allowed.",
| "361": "    The SBE DO sensor has a fairly long response time so data accuracy is not as high",
| "362": "            when it is in motion as it is during stops for bottles. This will be",
| "363": "            especially true when vertical DO gradients are large. To get an estimate",
| "364": "            of the accuracy of the SBE DO data during downcasts (after recalibration)",
| "365": "            a rough comparison was made between downcast SBE DO and upcast titrated",
| "366": "            samples. Some of the difference will be due to problems with flushing",
| "367": "            of Niskin bottles and/or analysis errors, so the following statement",
| "368": "            likely underestimates SBE DO accuracy.",
| "370": "    Downcast (CTD files) Oxygen:Dissolved:SBE data are considered, very roughly, to be:",
| "371": "           0.3 mL/L from 0 to 50db",
| "372": "           0.15 mL/L from 50db to 150db",
| "373": "           0.10 mL/L below 150db",
| "375": "    WARNING: The pH:SBE:Nominal data should be used with caution; no field calibration",
| "376": "    data were available at the time of processing.",
| "377": "    Calibration is required for each cast to get absolute values, although general",
| "378": "    trends within a cast are likely real.",
| "381": "    For details on the processing see document: 2016-07_Processing_Report.doc.",
| "383": "    ---------------------------------------------------------------------------------"
| },
| "CALIBRATION": {
| "$TABLE: CORRECTED CHANNELS": [
| "    !   Name                   Units  Fmla Pad    Coefficients\n",
| "    !   ---------------------- ------ ---- ------ ------------\n",
| "        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.0168)\n"
| ]
| }
| }
	attribute history = "{'2023-06-21T21:06:57.169011 UTC': 'Standardize ocean variables with add_standard_name tool', '2023-06-21T21:06:57.172750 UTC': 'Create sea_water_temperature variable and apply the following parameters: TEMPS901', '2023-06-21T21:06:57.175728 UTC': 'Create sea_water_practical_salinity variable and apply the following parameters: PSALST01', '2023-06-21T21:06:57.179465 UTC': \"Create depth variable and apply the following parameters: TEOS-10 gsw.z_from_p('PRESPR01','latitude')\", '2023-06-21T21:06:57.186024 UTC': 'Create sea_water_pressure variable and apply the following parameters: PRESPR01'}"
	attribute id = "2016-007-0066"
	attribute infoUrl = "http://www.pac.dfo-mpo.gc.ca/science/oceans/data-donnees/index-eng.html"
	attribute institution = "Institute of Ocean Sciences, 9860 West Saanich Road, Sidney, B.C., Canada"
	attribute keywords = "CTD, conductivity, density, depth, pressure, temperature, salinity, oxygen, subSurfaceSalinity, subSurfaceTemperature"
	attribute keywords_vocabulary = "GCMD Science Keywords"
	attribute license = "canada open government license"
	attribute mission = "2016-007"
	attribute naming_authority = "COARDS"
	attribute nrec = 103
	attribute platform = "Vector"
	attribute processing_level = "3"
	attribute project = "Strait of Georgia Water Properties Survey"
	attribute scientist = "Chandler P."
	attribute standard_name_vocabulary = "CF Standard Name Table v29"
	attribute summary = "This dataset contains observations made by the Institute of Ocean Sciences of Fisheries and Oceans (DFO) using CTDs mounted on rosettes. The CTDs were deployed by DFO and partner organizations on scientific cruises between 1968 to present. Variables present in the dataset include Temperature, Salinity, Oxygen, Conductivity, Depth, and Pressure. For any questions please contact (DFO.PAC.SCI.IOSData-DonneesISO.SCI.PAC.MPO@dfo-mpo.gc.ca)."
	attribute time_coverage_duration = 0.0
	attribute time_coverage_end = "2016-06-18 15:25:18UTC"
	attribute time_coverage_resolution = "n/a"
	attribute time_coverage_start = "2016-06-18 15:25:18UTC"
	attribute title = "IOS CTD profile data"
dataset /DOXMZZ01: float32, shape (103)
	attribute _FillValue = nan
	attribute featureType = "profile"
	attribute long_name = "Oxygen concentration"
	attribute standard_name = "dissolved_oxygen_concentration"
	attribute units = "umol/kg"
dataset /DOXYZZ01: float32, shape (103)
	attribute _FillValue = nan
	attribute featureType = "profile"
	attribute long_name = "Oxygen concentration"
	attribute standard_name = "dissolved_oxygen_concentration"
	attribute units = "mL/L"
dataset /PRESPR01: float32, shape (103)
	attribute _FillValue = nan
	attribute featureType = "profile"
	attribute long_name = "Pressure"
	attribute standard_name = "sea_water_pressure"
	attribute units = "decibar"
dataset /PSALST01: float32, shape (103)
	attribute _FillValue = nan
	attribute featureType = "profile"
	attribute long_name = "Sea Water Practical Salinity"
	attribute standard_name = "sea_water_practical_salinity"
	attribute units = "PSS-78"
dataset /TEMPS901: float32, shape (103)
	attribute _FillValue = nan
	attribute featureType = "profile"
	attribute long_name = "Sea Water Temperature"
	attribute standard_name = "sea_water_temperature"
	attribute units = "deg_C"
dataset /agency: string, shape ()
	text = "IOS, Ocean Sciences Division, Sidney, B.C."
dataset /country: string, shape ()
	text = "Canada"
dataset /depth: float32, shape (103)
	attribute _FillValue = nan
	attribute comment = "{'2023-06-21T21:06:57.179495 UTC': \"Create depth variable and apply the following parameters: TEOS-10 gsw.z_from_p('PRESPR01','latitude')\"}"
	attribute long_name = "Depth in meters"
	attribute standard_name = "depth_below_sea_level_in_meters"
	attribute units = "m"
dataset /event_number: string, shape ()
	text = "66"
dataset /filename: string, shape ()
	text = "2016-007-0066.ctd"
dataset /geographic_area: string, shape ()
	text = "Central-Strait-of-Georgia "
dataset /instrument_model: string, shape ()
	text = "SBE-911plus"
dataset /instrument_serial_number: string, shape ()
	text = "0550"
dataset /instrument_type: string, shape ()
	text = "Sea-Bird CTD"
dataset /latitude: float32, shape ()
	attribute _FillValue = nan
	attribute long_name = "Latitude"
	attribute standard_name = "latitude"
	attribute units = "degrees_north"
dataset /longitude: float32, shape ()
	attribute _FillValue = nan
	attribute long_name = "Longitude"
	attribute standard_name = "longitude"
	attribute units = "degrees_east"
dataset /mission_id: string, shape ()
	text = "2016-007"
dataset /platform: string, shape ()
	text = "Vector"
dataset /profile: string, shape ()
	attribute cf_role = "profile_id"
	text = "2016-007-0066"
dataset /project: string, shape ()
	text = "Strait of Georgia Water Properties Survey"
dataset /scientist: string, shape ()
	text = "Chandler P."
dataset /sea_water_practical_salinity: float32, shape (103)
	attribute _FillValue = nan
	attribute comment = "{'2023-06-21T21:06:57.175737 UTC': 'Create sea_water_practical_salinity variable and apply the following parameters: PSALST01'}"
	attribute long_name = "Sea Water Practical Salinity"
	attribute standard_name = "sea_water_practical_salinity"
	attribute units = "PSS-78"
dataset /sea_water_pressure: float32, shape (103)
	attribute _FillValue = nan
	attribute comment = "{'2023-06-21T21:06:57.186033 UTC': 'Create sea_water_pressure variable and apply the following parameters: PRESPR01'}"
	attribute long_name = "Sea Water Pressure in dbar"
	attribute standard_name = "sea_water_pressure"
	attribute units = "dbar"
dataset /sea_water_temperature: float32, shape (103)
	attribute _FillValue = nan
	attribute comment = "{'2023-06-21T21:06:57.172760 UTC': 'Create sea_water_temperature variable and apply the following parameters: TEMPS901'}"
	attribute long_name = "Sea Water Temperature"
	attribute standard_name = "sea_water_temperature"
	attribute units = "degC"
dataset /time: float64, shape ()
	attribute _FillValue = nan
	attribute long_name = "time"
	attribute standard_name = "time"
	attribute units = "seconds since 1970-01-01 00:00:00+0000"
dataset /z: float32, shape (0)