*2024/11/29 15:40:04.63
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2024/08/16 14:55:01.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 27
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : AB182524
    NUMBER OF CHANNELS  : 10

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.388          26.541
       2 Depth                      metres          1.374          26.326
       3 Temperature:Primary        'deg C (ITS90)' 9.8466         21.0899
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.244          1.77
       5 Salinity:T0:C0             PSS-78          24.2473        30.0145
       6 PAR                        uE/m^2/sec      0.983          57.956
       7 Oxygen:Dissolved:SBE       mL/L            2.959          5.803
       8 Oxygen:Dissolved:SBE       umol/kg         129.1669       254.8903
       9 Conductivity:Primary       S/m             3.305422       3.613907
      10 Number_of_bin_records      n/a             3              39
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     1
       7  -99   ' '        7  F       ' '     2
       8  -99   ' '        6  F       ' '     1
       9  -99   ' '       10  F       ' '     5
      10  -99   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        E:\Telework\2024-070\Processing\derive\2024-070-0045.cnv
    $END

*ADMINISTRATION
    MISSION             : 2024-070
    AGENCY              : IOS,Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Plankton
    SCIENTIST           : Young K.
    PLATFORM            : Richardson Point

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : IS-2
    EVENT NUMBER        : 45
    LATITUDE            :  49  38.16600 N  ! (deg min)
    LONGITUDE           : 124   5.01000 W  ! (deg min)
    WATER DEPTH         : 26

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251255

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             6448
        Conductivity                       ' '             6147
        'Pressure:Strain Gauge'            ' '             1255
        PAR/Logarithmic:Satlantic          ' '             2274
        'Oxygen:SBE 43'                    ' '             4378
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-8046
    $END
    $REMARKS
        <SoftwareVersion>1.0.4</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.3    2024/11/27 10:43:52      3454      3454
        CLEAN    5.3    2024/11/27 10:44:08      3447      3447
        CLIP     1.4.1  2024/11/27 11:09:07      3447      1338
        SHIFTDAT 3.5.1  2024/11/27 11:17:17      1338      1338
        DELETE   6.3    2024/11/27 11:17:34      1338       627
        CTDEDIT  5.5.1  2024/11/28 10:48:22       627       607
        BINAVE   4.2.1  2024/11/28 11:05:15       607        27
        REMOVECH 8.2    2024/11/28 16:53:12        27        27
        CHGUNITS 3.2    2024/11/28 16:53:19        27        27
        REORDER  1.3.1  2024/11/28 16:58:44 ?         ?
        HDREDIT2 3.2    2024/11/29 15:40:04 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2024/11/27 10:44:01 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First, Last Records =   2110, end from event list: clip.csv
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary [S/m]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  2.00
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    7
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   9 points) will be deleted.
         Drop rate applies in the range    10.00 to    16.64 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.5.1   2024/11/28 10:48:22
             20 records were deleted in this editing session.
         No data values were changed.
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2024/11/28 16:53:12
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
          Prediction_Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0 [PSS-78]
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2024/11/29 15:40:04
         Applied edit header: E:\Telework\2024-070\Processing\doc\2024-070-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  7: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  9: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.5
         Channel 10: Number_of_bin_records [n/a]
           Pad:    ' ' ==> -99
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: PAR [uE/m^2/sec]
           Format: F11.3 ==> F7.1
    $END

*COMMENTS
SBE HEADER
  <SBEDataUploadFile>
  <![CDATA[
  ** Latitude: 49 38.166 N
  ** Longitude: 124 5.01 W
  ** Station: IS-2
  ** Depth: 26 m
  ]]>
     <ApplicationData>
        <firmware>
           <SoftwareVersion>1.0.4</SoftwareVersion>
           <BuildDate>Mar 23 2021 08:54:28</BuildDate>
           </firmware>
        </ApplicationData>
     <InstrumentState>
        <StatusData DeviceType='SBE25plus' SerialNumber='0251255'>
           <DateTime>2024-08-16T14:54:57</DateTime>
           <EventSummary numEvents='273'/>
           <Power>
              <vBattery>16.2</vBattery>
              <vExternal>0.3</vExternal>
              <vLithium>7.3</vLithium>
              <vRTC>3.3</vRTC>
              <iExt>9.8</iExt>
              <iSys>48.8</iSys>
              <iCPU>18.8</iCPU>
              </Power>
           <MemorySummary>
              <Bytes>72187904</Bytes>
              <BytesFree>1944027136</BytesFree>
              <Samples>1002609</Samples>
              <SamplesFree>27000376</SamplesFree>
              <Files>0</Files>
              <CastFiles>0</CastFiles>
              </MemorySummary>
           </StatusData>
        <HardwareData DeviceType='SBE25plus' SerialNumber='0251255'>
           <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
           <FirmwareVersion>1.0.4</FirmwareVersion>
           <FirmwareDate>Mar 23 2021 08:54:28</FirmwareDate>
           <CommandSetVersion>1.0</CommandSetVersion>
           <PCBAssembly PCBSerialNum='271365' AssemblyNum='41842E'/>
           <PCBAssembly PCBSerialNum='271367' AssemblyNum='41843D'/>
           <MfgDate>2023-02-02T08:30:30</MfgDate>
           <InternalSensors>
              <Sensor id='Main Temperature'>
                 <type>temperature-0</type>
                 <SerialNum>03-6448</SerialNum>
                 </Sensor>
              <Sensor id='Main Conductivity'>
                 <type>conductivity-0</type>
                 <SerialNum>04-6147</SerialNum>
                 </Sensor>
              <Sensor id='Main Pressure'>
                 <Type>strain-0</Type>
                 <SerialNum>12364712</SerialNum>
                 </Sensor>
              </InternalSensors>
           <ExternalSensors>
              <Sensor id='volt 0'>
                 <Type>PAR</Type>
                 <SerialNum>PAR-2274</SerialNum>
                 </Sensor>
              <Sensor id='volt 1'>
                 <Type>NONE</Type>
                 <SerialNum>NONE</SerialNum>
                 </Sensor>
              <Sensor id='volt 2'>
                 <Type>DO</Type>
                 <SerialNum>4378</SerialNum>
                 </Sensor>
              <Sensor id='volt 3'>
                 <Type>NONE</Type>
                 <SerialNum>NONE</SerialNum>
                 </Sensor>
              <Sensor id='volt 4'>
                 <Type>CHL</Type>
                 <SerialNum>8046</SerialNum>
                 </Sensor>
              <Sensor id='volt 5'>
                 <Type>NONE</Type>
                 <SerialNum>NONE</SerialNum>
                 </Sensor>
              <Sensor id='volt 6'>
                 <Type>NONE</Type>
                 <SerialNum>NONE</SerialNum>
                 </Sensor>
              <Sensor id='volt 7'>
                 <Type>NONE</Type>
                 <SerialNum>NONE</SerialNum>
                 </Sensor>
              <Sensor id='serial 1'>
                 <Type>NONE</Type>
                 <SerialNum>NONE</SerialNum>
                 </Sensor>
              <Sensor id='serial 2'>
                 <Type>NONE</Type>
                 <SerialNum>NONE</SerialNum>
                 </Sensor>
              </ExternalSensors>
           </HardwareData>
        <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251255'>
           <Serial>
              <SerialPort0>
                 <baudconsole>115200</baudconsole>
                 <echoconsole>1</echoconsole>
                 </SerialPort0>
              <SerialPort1>
                 <enableser1>0</enableser1>
                 <nameser1>ser1</nameser1>
                 <baudser1>9600</baudser1>
                 <inlineser1>1</inlineser1>
                 <promptser1>S></promptser1>
                 <measstringser1>ts</measstringser1>
                 <measintervalser1>0</measintervalser1>
                 <startstringser1>start</startstringser1>
                 <execcharser1>254</execcharser1>
                 <termcharser1>254</termcharser1>
                 <suppressser1>1</suppressser1>
                 <timeoutser1>3</timeoutser1>
                 <failoutser1>60</failoutser1>
                 </SerialPort1>
              <SerialPort2>
                 <enableser2>0</enableser2>
                 <nameser2>ser2</nameser2>
                 <baudser2>9600</baudser2>
                 <inlineser2>1</inlineser2>
                 <promptser2>S></promptser2>
                 <measstringser2>ts</measstringser2>
                 <measintervalser2>0</measintervalser2>
                 <startstringser2>start</startstringser2>
                 <execcharser2>254</execcharser2>
                 <termcharser2>254</termcharser2>
                 <suppressser2>1</suppressser2>
                 <timeoutser2>3</timeoutser2>
                 <failoutser2>60</failoutser2>
                 </SerialPort2>
              </Serial>
           <Settings>
              <vauxdelay0>0</vauxdelay0>
              <vauxdelay1>0</vauxdelay1>
              <vauxdelay2>0</vauxdelay2>
              <vauxdelay3>0</vauxdelay3>
              <mincondfreq>3000</mincondfreq>
              <pumpdelay>60</pumpdelay>
              <executedtag>1</executedtag>
              </Settings>
           <RealTimeOutput>
              <outputformat>0</outputformat>
              <historicrate>1</historicrate>
              <vout0>1</vout0>
              <vout1>0</vout1>
              <vout2>0</vout2>
              <vout3>0</vout3>
              <vout4>0</vout4>
              <vout5>0</vout5>
              <vout6>0</vout6>
              <vout7>0</vout7>
              <outputrate>8</outputrate>
              </RealTimeOutput>
           </ConfigurationData>
        <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251255'>
           <Calibration format='STRAIN0' id='Main Pressure'>
              <SerialNum>12364712</SerialNum>
              <Pcaldate>2023-02-13</Pcaldate>
              <PA0>1.669452e-01</PA0>
              <PA1>2.757409e-04</PA1>
              <PA2>-6.637241e-14</PA2>
              <PTEMPA0>-7.156559e+01</PTEMPA0>
              <PTEMPA1>4.895334e+01</PTEMPA1>
              <PTEMPA2>-7.272807e-02</PTEMPA2>
              <PTCA0>8.388920e+06</PTCA0>
              <PTCA1>5.351747e+01</PTCA1>
              <PTCA2>-1.188608e+00</PTCA2>
              <PTCB0>2.512468e+01</PTCB0>
              <PTCB1>-7.500000e-05</PTCB1>
              <PTCB2>0.000000e+00</PTCB2>
              <Poffset>0.000000e+00</Poffset>
              <Pfullscale>1.450000e+03</Pfullscale>
              </Calibration>
           </CalibrationCoefficients>
        <EventCounter DeviceType='SBE25plus' SerialNumber='0251255'>
           <EventSummary numEvents='273'/>
           <Event type='Console Suppress' count='18'/>
           <Event type='Power On Reset' count='255'/>
           </EventCounter>
        </InstrumentState>
     <InstrumentRawData>
        <startTime>2024-08-16T14:55:01</startTime>
        <Data>
# nquan = 12
# nvalues = 3454
# units = specified
# name 0 = scan: Scan Count
# name 1 = prdM: Pressure, Strain Gauge [db]
# name 2 = depSM: Depth [salt water, m], lat = 49.00
# name 3 = t090C: Temperature [ITS-90, deg C]
# name 4 = c0S/m: Conductivity [S/m]
# name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 7 = par/sat/log: PAR/Logarithmic, Satlantic [umol photons/m^2/sec]
# name 8 = sal00: Salinity, Practical [PSU]
# name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 1
# name 10 = dz/dtM: Descent Rate [m/s], WS = 2
# name 11 = flag: flag
# span 0 =          1,       3454
# span 1 =      0.276,     26.640
# span 2 =      0.274,     26.412
# span 3 =   -10.3627,    21.0984
# span 4 =   0.052234,   3.616350
# span 5 =    -0.1430,    27.1910
# span 6 =     1.5222,     3.1521
# span 7 = 8.5578e-02, 1.1381e+02
# span 8 =     0.3649,    30.0688
# span 9 =  -111.5381,    12.6475
# span 10 =     -0.864,      0.831
# span 11 = 0.0000e+00, 0.0000e+00
# interval = seconds: 0.0625
# start_time = Aug 16 2024 14:55:01 [Instrument's time stamp, header]
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>6448</SerialNumber>
#       <CalibrationDate>04-Feb-23</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33293641e-003</G>
#       <H>6.39082893e-004</H>
#       <I>2.20950583e-005</I>
#       <J>2.06770154e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>6147</SerialNumber>
#       <CalibrationDate>18-Jan-23</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors.
 -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.01031449e+001</G>
#         <H>1.39347559e+000</H>
#         <I>-1.63382489e-003</I>
#         <J>1.84236483e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>1255</SerialNumber>
#       <CalibrationDate>13-Feb-23</CalibrationDate>
#       <PA0>1.66945152e-001</PA0>
#       <PA1>2.75740921e-004</PA1>
#       <PA2>-6.63724103e-014</PA2>
#       <PTEMPA0>-7.15655855e+001</PTEMPA0>
#       <PTEMPA1>4.89533360e+001</PTEMPA1>
#       <PTEMPA2>-7.27280730e-002</PTEMPA2>
#       <PTCA0>8.38892017e+006</PTCA0>
#       <PTCA1>5.35174656e+001</PTCA1>
#       <PTCA2>-1.18860817e+000</PTCA2>
#       <PTCB0>2.51246775e+001</PTCB0>
#       <PTCB1>-7.50000000e-005</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, PAR/Logarithmic, Satlantic -->
#     <PARLog_SatlanticSensor SensorID="76" >
#       <SerialNumber>2274</SerialNumber>
#       <CalibrationDate>01/25/23</CalibrationDate>
#       <a0>9.7164e-001</a0>
#       <a1>8.0889e-001</a1>
#       <Im>1.3589e+000</Im>
#       <ConversionUnits>1</ConversionUnits>
#       <Multiplier>1.0000e+000</Multiplier>
#     </PARLog_SatlanticSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Unknown 1, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>4378</SerialNumber>
#       <CalibrationDate>28-Mar-23</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
later. -->
#         <Soc>4.6069e-001</Soc>
#         <offset>-0.5173</offset>
#         <A>-3.4533e-003</A>
#         <B> 1.1469e-004</B>
#         <C>-1.9161e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 2.2900</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- Unknown 3, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRTD-8046</SerialNumber>
#       <CalibrationDate>21-Apr-2023</CalibrationDate>
#       <ScaleFactor>1.30000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0110</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- Unknown 5, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- Unknown 6, Free -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- Unknown 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Nov 27 2024 08:35:42, 7.26.7.129 [datcnv_vars = 8]
# datcnv_in = E:\Telework\2024-070\Unprocessed\2024-070-0045.xml E:\Telework\202
4-070\Processing\doc\2024-070-ctd.xmlcon
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# wildedit_date = Nov 27 2024 08:36:34, 7.26.7.129
# wildedit_in = E:\Telework\2024-070\Processing\convert\2024-070-0045.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 5.0
# wildedit_pass2_mindelta = 0.000e+000
# wildedit_npoint = 50
# wildedit_vars = prdM depSM t090C c0S/m
# wildedit_excl_bad_scans = yes
# wfilter_date = Nov 27 2024 10:01:04, 7.26.7.129
# wfilter_in = E:\Telework\2024-070\Processing\wildedit\2024-070-0045.cnv
# wfilter_excl_bad_scans = yes
# wfilter_action t090C = cosine, 16
# wfilter_action c0S/m = cosine, 16
# alignctd_date = Nov 27 2024 10:02:14, 7.26.7.129
# alignctd_in = E:\Telework\2024-070\Processing\wfilter\2024-070-0045.cnv
# alignctd_adv = sbeox0V 2.500
# celltm_date = Nov 27 2024 10:02:53, 7.26.7.129
# celltm_in = E:\Telework\2024-070\Processing\align\2024-070-0045.cnv
# celltm_alpha = 0.0400, 0.0000
# celltm_tau = 8.0000, 0.0000
# celltm_temp_sensor_use_for_cond = primary,
# Derive_date = Nov 27 2024 10:03:56, 7.26.7.129 [derive_vars = 3]
# Derive_in = E:\Telework\2024-070\Processing\celltm\2024-070-0045.cnv E:\Telewo
rk\2024-070\Processing\doc\2024-070-ctd.xmlcon
# derive_time_window_docdt = seconds: 1
# derive_ox_tau_correction = yes
# derive_time_window_dzdt = seconds: 2
# file_type = ascii
 END*
Remarks from CTDEDIT:
CTDEDIT was used to remove records corrupted by shed wakes near the
 bottom of the cast;

----------------------------------------------------------------------------------------------------
Data Processing Notes:
----------------------
Oxygen:Dissolved, Conductivity, PAR and Fluorescence:URU:Wetlabs data are nominal and
unedited except that some records were removed in editing temperature and salinity.

There were only 6 salinity calibration samples taken during this cruise, of which only 3 were
below 5m. The CTD data were lower than the deep bottle samples by an average of 0.001psu; the CTD
may be reading low by a little more than that due to incomplete flushing of NIskin bottles.
Salinity is likely good to +/-0.005psu.

10 extracted chlorophyll samples were collected at the surface using a bucket, while the CTD was
soaking at 10m during a regular CTD cast. 3 samples from 5m came from a Niskin bottle during chito
casts.
The ratio of CTD Fluorescence to Extracted CHL samples was somewhat lower than usually seen
especially at the low end of the range, but it is consistent with other uses of this equipment
during 4 other 2024 cruises in the same area.

Oxygen:Dissolved:SBE values cannot be confirmed as there was no calibration sampling for
dissolved oxygen. Surface saturation values were all between 100% and 135% except for station 56
where it was 65%. That is a site of active mixing.

It is likely that SBE dissolved oxygen values are slightly low with typical errors for these sensors
being from 1% to 3%.

For details on the processing see document: 2024-070_Processing_Report.doc.
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7--- --8-- ----9---- -10-
!Pressu Depth  Temperat Fluores Salinity  PAR   Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0          :      n:    ity:      er_o
!              Primary  URU:                    Dissol Disso Primary   ~bin
!                       Wetlabs                 ved:   lved:           _rec
!                                               SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ------ ----- --------- ----
*END OF HEADER
    1.4    1.4  20.8828   0.842  24.2473   58.0   5.57 244.9   3.51154   11
    2.0    2.0  20.8899   0.878  24.2507   46.6   5.59 245.7   3.51253   39
    3.0    2.9  20.9035   0.891  24.2682   36.0   5.55 244.0   3.51586   30
    4.0    4.0  21.0008   0.864  24.3602   28.1   5.61 246.4   3.53518   19
    5.0    4.9  21.0734   0.852  24.4101   23.4   5.54 243.3   3.54717   21
    6.0    5.9  21.0899   0.858  24.5221   19.4   5.80 254.7   3.56312   22
    7.0    6.9  21.0446   1.275  24.8270   16.2   5.80 254.9   3.59972   22
    8.0    7.9  20.8495   1.596  25.0491   13.4   5.67 249.0   3.61391   22
    9.0    8.9  19.2116   1.770  25.8687   11.0   5.03 220.6   3.59218   22
   10.0    9.9  16.2927   1.248  27.1227    9.1   3.93 172.0   3.51432   22
   11.0   10.9  13.1857   0.613  28.4422    7.8   3.49 152.6   3.41477   22
   12.0   11.9  12.3510   0.469  28.7801    6.9   3.55 155.0   3.38342   21
   13.0   12.9  12.0311   0.468  28.9170    6.0   3.61 157.7   3.37190   21
   14.0   13.9  11.8859   0.515  28.9864    5.2   3.69 161.1   3.36741   22
   15.0   14.9  11.8588   0.541  29.0056    4.5   3.74 163.4   3.36725   21
   16.0   15.9  11.8320   0.572  29.0261    3.9   3.71 162.1   3.36725   21
   17.0   16.9  11.7844   0.534  29.0539    3.4   3.62 158.4   3.36631   21
   18.0   17.8  11.3492   0.593  29.2655    3.0   3.40 148.6   3.35272   22
   19.0   18.9  10.7875   0.654  29.5280    2.6   3.27 142.9   3.33370   21
   20.0   19.8  10.5906   0.584  29.6162    2.3   3.24 141.3   3.32653   21
   21.0   20.8  10.4248   0.516  29.6979    2.0   3.20 139.9   3.32119   21
   22.0   21.8  10.2923   0.488  29.7646    1.7   3.14 137.1   3.31704   22
   23.0   22.8  10.1496   0.435  29.8408    1.5   3.07 134.0   3.31297   29
   24.0   23.8  10.0505   0.363  29.8947    1.3   3.05 133.1   3.31023   29
   25.0   24.8  10.0106   0.327  29.9190    1.2   3.08 134.5   3.30940   30
   26.0   25.8   9.9335   0.302  29.9639    1.0   3.03 132.2   3.30755   30
   26.5   26.3   9.8466   0.244  30.0145    1.0   2.96 129.2   3.30542    3