*2026/01/28 14:23:41.29
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2024/09/13 05:51:31.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 1
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : C7F289F3
    NUMBER OF CHANNELS  : 12

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         3              3
       2 Depth                      metres          2.685          2.685
       3 Temperature:Primary        'deg C (ITS90)' 16.6741        16.6741
       4 Conductivity:Primary       S/m             3.630085       3.630085
       5 Salinity:T0:C0             PSS-78          27.8408        27.8408
       6 Oxygen:Dissolved:SBE       mL/L            7.419          7.419
       7 Oxygen:Dissolved:SBE       umol/kg         324.8033       324.8033
       8 Fluorescence:URU:Wetlabs   mg/m^3          3.757          3.757
       9 Transmissivity             %/metre         33.6           33.6
      10 Transmissivity:Green       %/metre         41.6           41.6
      11 PAR                        uE/m^2/sec      0.189          0.189
      12 Number_of_bin_records      n/a             16             16
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '       10  F       ' '     5
       5  -99   ' '        9  F       R4      4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '        8  F       ' '     3
       9  -99   ' '        6  F       ' '     1
      10  -99   ' '        6  F       ' '     1
      11  -99   ' '        7  F       ' '     1
      12  ' '   ' '        5  I       I       0
    $END
$REMARKS
  This file converted from Sea-Bird file:
  C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\CTD\SeaBird_Steps\5_DERIVE\2024-020-0158.cnv
$END

*ADMINISTRATION
    MISSION             : 2024-020
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : La Perouse
    SCIENTIST           : Sastri A.
    PLATFORM            : John P. Tully

*LOCATION
    GEOGRAPHIC AREA     : North-East Pacific
    STATION             : CPF2
    EVENT NUMBER        : 158
    LATITUDE            :  49  27.96000 N  ! (deg min)
    LONGITUDE           : 124  29.96000 W  ! (deg min)
    WATER DEPTH         : 325

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0443
    LOCATION            : Mid-ship                              ! custom item

    $TABLE: SENSORS
    !   Name                                 Abs Depth       Serial No
    !   -----------------------------------  --------------  ----------
        Temperature                          ' '             2106
        Conductivity                         ' '             2754
        'Pressure:Digiquartz with TC'        ' '             0443
        Temperature:2                        ' '             5130
        Conductivity:2                       ' '             1766
        'Oxygen:SBE 43'                      ' '             4372
        Fluorometer:Seapoint                 ' '             4186
        Altimeter                            ' '             76341
        PAR/Irradiance:Biospherical/Licor    ' '             70613
        'Fluorometer:WET Labs ECO-AFL/FL'    ' '             FLRTD-2216
        'Transmissometer:WET Labs C-Star'    ' '             1185DR
        'Transmissometer:WET Labs C-Star:2'  ' '             1883DG
    $END
    $REMARKS
        Software Version Seasave V 7.26.7.121
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.3    2025/12/15 13:19:16      4534      4534
        CLEAN    5.3    2025/12/15 13:28:12      4534      4534
        SHIFTDAT 3.5.1  2026/01/05 11:13:19      4534      4534
        DELETE   6.3    2026/01/05 11:48:24      4534        16
        CTDEDIT  5.5.1  2026/01/12 09:24:57        16        16
        CALIB    12.1   2026/01/28 12:54:55        16        16
        FILTERS  4.3    2026/01/28 13:10:34        16        16
        FILTERS  4.3    2026/01/28 13:26:36        16        16
        BINAVE   4.2.1  2026/01/28 13:34:07        16         1
        REMOVECH 8.2    2026/01/28 13:53:08         1         1
        REMOVECH 8.2    2026/01/28 13:54:19         1         1
        CHGUNITS 3.2    2026/01/28 13:56:34         1         1
        REORDER  1.3.1  2026/01/28 13:59:07 ?         ?
        HDREDIT2 3.2    2026/01/28 14:23:41 ?         ?
    $END
   $REMARKS
       -CLEAN functions: 2025/12/15 13:22:20 20
        Reset #RECS, MIN & MAX values in header.
        Set event to last  3 characters of file name
       -The following SHIFT parameters were used.
        Shift Channel: Fluorescence:URU:Seapoint
        # of Records to Advance (-ve for Delay):
        At REC#     0 Shift= 24.00
        Salinity was recalculated after shift
       -The following DELETE parameters were used:
        Surface Record Removal: Last Press Min
          Maximum Surface Pressure (relative):      10.00
          Surface Swell Pressure Tolerance:       1.00
        Pressure filtered over width:   15
        Swells deleted. Warning message if pressure difference of      2.00
        Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
        Drop rate applies in the range    10.00 to     0.04 dbars
        Sample interval (from FILE section of header) =     0.042 seconds.
       -CTDEDIT  v5.5.1   2026/01/12 09:24:57
        No data values were changed.
       -CALIB parameters: 2026/01/28 12:54:55
        Calibration type = Correct
        Mode: ONLY - calibration specs from Cal File only.
        Salinity is computed
        Calibration file = C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\2024-020-recal1.ccf
        Calibrations applied:
        Ch Name                          Units    Fmla Coefficents
        -- ----------------------------- --------- --- -----------------------------
        19 Oxygen:Dissolved:SBE          mL/L       10 -0.9900000E-02  0.1000100E+01
        Ch Name                          Units    Fmla Coefficents
        -- ----------------------------- --------- --- -----------------------------
        17 Salinity:T0:C0                PSS-78     10 -0.2000000E-03  0.1000000E+01
       -The following FILTER parameters were used.
        Median filter was used.
        Filter width =   11
        The following channel(s) were filtered.
          Fluorescence:URU:Wetlabs:ECO-AFL
       -The following FILTER parameters were used.
        Median filter was used.
        Filter width =   11
        The following channel(s) were filtered.
          Fluorescence:URU:Wetlabs:ECO-AFL
       -The following BINAVE parameters were used:
        Bin channel = Pressure [decibar]
        Averaging interval =    1.00
        Minimum bin value =       0.000
        Bin value was used
        Interpolated values were NOT used for empty bins
        Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
       -REMOVECH 2026/01/28 13:53:08
        The following CHANNEL(S) were removed:
         Scan_Number
         Temperature:Secondary [deg C (ITS90)]
         Conductivity:Secondary [S/m]
         Oxygen:Voltage:SBE [volts]
         Altimeter [metres]
         Status:Pump
         Descent_Rate [m/s]
         Fluorescence:URU:Seapoint [mg/m^3]
         Salinity:T1:C1 [PSS-78]
         Flag
       -REMOVECH 2026/01/28 13:54:19
        The following CHANNEL(S) were removed:
         Descent_Rate [m/s]
       -CHANGE units:
        Temperature reference channel: Temperature:Primary
        Salinity    reference channel: Salinity:T0:C0
        'Oxygen:Dissolved:SBE' changed from mL/L    to umol/kg
       -HEADER EDITS: 2026/01/28 14:23:41
        Applied edit header: C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\2024-020-hdr.txt
        Channel  1: Pressure [decibar]
          Format: F10.3 ==> F7.1
        Channel  2: Depth [metres]
          Name:   Depth:Salt_Water ==> Depth
          Format: F10.3 ==> F7.1
        Channel  4: Conductivity:Primary [S/m]
          Format: F11.6 ==> F10.5
        Channel  6: Oxygen:Dissolved:SBE [mL/L]
          Format: F8.3 ==> F7.2
        Channel  9: Transmissivity [%/metre]
          Name:   Transmissivity:1 ==> Transmissivity
        Channel 10: Transmissivity:Green [%/metre]
          Name:   Transmissivity:2 ==> Transmissivity:Green
        Channel  8: Fluorescence:URU:Wetlabs [mg/m^3]
          Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
        Channel 11: PAR [uE/m^2/sec]
          Units:  umol/m^2/sec ==> uE/m^2/sec
          Format: F11.3 ==> F7.1
   $END

*COMMENTS
 SBE HEADER
   Sea-Bird SBE 9 Data File:
   FileName = C:\CTD data\2024-020\2024-020-0158.hex
   Software Version Seasave V 7.26.7.121
   Temperature SN = 2106
   Conductivity SN = 2754
   Number of Bytes Per Scan = 37
   Number of Voltage Words = 4
   Number of Scans Averaged by the Deck Unit = 1
   System UpLoad Time = Sep 13 2024 05:51:31
   NMEA Latitude = 49 27.96 N
   NMEA Longitude = 124 29.96 W
   NMEA UTC (Time) = Sep 13 2024  05:49:59
   Store Lat/Lon Data = Append to Every Scan
    Tully: 2024-020
    Station:  CPF2
    Depth:  325
   System UTC = Sep 13 2024 05:51:31
 # nquan = 21
 # nvalues = 4534
 # units = specified
 # name 0 = scan: Scan Count
 # name 1 = prDM: Pressure, Digiquartz [db]
 # name 2 = depSM: Depth [salt water, m]
 # name 3 = t090C: Temperature [ITS-90, deg C]
 # name 4 = t190C: Temperature, 2 [ITS-90, deg C]
 # name 5 = c0S/m: Conductivity [S/m]
 # name 6 = c1S/m: Conductivity, 2 [S/m]
 # name 7 = CStarTr0: Beam Transmission, WET Labs C-Star [%]
 # name 8 = sbeox0V: Oxygen raw, SBE 43 [V]
 # name 9 = altM: Altimeter [m]
 # name 10 = pumps: Pump Status
 # name 11 = dz/dtM: Descent Rate [m/s]
 # name 12 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
 # name 13 = CStarTr1: Beam Transmission, WET Labs C-Star, 2 [%]
 # name 14 = par: PAR/Irradiance, Biospherical/Licor
 # name 15 = flSP: Fluorescence, Seapoint
 # name 16 = sal00: Salinity, Practical [PSU]
 # name 17 = sal11: Salinity, Practical, 2 [PSU]
 # name 18 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
 # name 19 = dz/dtM: Descent Rate [m/s], WS = 2
 # name 20 = flag: flag
 # span 0 =          1,       4534
 # span 1 =      2.493,     10.040
 # span 2 =      2.471,      9.954
 # span 3 =    14.4174,    16.7580
 # span 4 =    14.4100,    16.7576
 # span 5 =   3.550014,   3.636185
 # span 6 =   3.547255,   3.635708
 # span 7 =    75.4668,    80.0060
 # span 8 =     2.5226,     3.1258
 # span 9 =      99.95,     100.00
 # span 10 =          0,          1
 # span 11 =     -0.856,      0.126
 # span 12 =     2.5343,     4.3511
 # span 13 =    79.8215,    86.2131
 # span 14 = 1.0000e-12, 5.9662e-01
 # span 15 = 2.2711e+00, 3.7241e+00
 # span 16 =    27.8303,    28.8480
 # span 17 =    27.8259,    28.7989
 # span 18 =     5.9463,     7.4532
 # span 19 =     -0.832,      0.061
 # span 20 = 0.0000e+00, 0.0000e+00
 # interval = seconds: 0.0416667
 # start_time = Sep 13 2024 05:51:31 [System UTC, header]
 # bad_flag = -9.990e-29
 # <Sensors count="13" >
 #   <sensor Channel="1" >
 #     <!-- Frequency 0, Temperature -->
 #     <TemperatureSensor SensorID="55" >
 #       <SerialNumber>2106</SerialNumber>
 #       <CalibrationDate>15-Feb-23</CalibrationDate>
 #       <UseG_J>1</UseG_J>
 #       <A>0.00000000e+000</A>
 #       <B>0.00000000e+000</B>
 #       <C>0.00000000e+000</C>
 #       <D>0.00000000e+000</D>
 #       <F0_Old>0.000</F0_Old>
 #       <G>4.14692690e-003</G>
 #       <H>6.30774382e-004</H>
 #       <I>2.10717013e-005</I>
 #       <J>2.11511943e-006</J>
 #       <F0>1000.000</F0>
 #       <Slope>1.00000000</Slope>
 #       <Offset>0.0000</Offset>
 #     </TemperatureSensor>
 #   </sensor>
 #   <sensor Channel="2" >
 #     <!-- Frequency 1, Conductivity -->
 #     <ConductivitySensor SensorID="3" >
 #       <SerialNumber>2754</SerialNumber>
 #       <CalibrationDate>14-Feb-23</CalibrationDate>
 #       <UseG_J>1</UseG_J>
 #       <!-- Cell const and series R are applicable only for wide range sensors.
  -->
 #       <SeriesR>0.0000</SeriesR>
 #       <CellConst>2000.0000</CellConst>
 #       <ConductivityType>0</ConductivityType>
 #       <Coefficients equation="0" >
 #         <A>0.00000000e+000</A>
 #         <B>0.00000000e+000</B>
 #         <C>0.00000000e+000</C>
 #         <D>0.00000000e+000</D>
 #         <M>0.0</M>
 #         <CPcor>-9.57000000e-008</CPcor>
 #       </Coefficients>
 #       <Coefficients equation="1" >
 #         <G>-1.06129987e+001</G>
 #         <H>1.62039974e+000</H>
 #         <I>-3.87914662e-003</I>
 #         <J>3.93074083e-004</J>
 #         <CPcor>-9.57000000e-008</CPcor>
 #         <CTcor>3.2500e-006</CTcor>
 #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
 #         <WBOTC>0.00000000e+000</WBOTC>
 #       </Coefficients>
 #       <Slope>1.00000000</Slope>
 #       <Offset>0.00000</Offset>
 #     </ConductivitySensor>
 #   </sensor>
 #   <sensor Channel="3" >
 #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
 #     <PressureSensor SensorID="45" >
 #       <SerialNumber>0443</SerialNumber>
 #       <CalibrationDate>23-Mar-22</CalibrationDate>
 #       <C1>-4.435292e+004</C1>
 #       <C2>-1.635794e-001</C2>
 #       <C3>1.192740e-002</C3>
 #       <D1>3.979900e-002</D1>
 #       <D2>0.000000e+000</D2>
 #       <T1>2.993627e+001</T1>
 #       <T2>-3.271008e-004</T2>
 #       <T3>3.759160e-006</T3>
 #       <T4>1.565300e-009</T4>
 #       <Slope>0.99982783</Slope>
 #       <Offset>-2.24792</Offset>
 #       <T5>0.000000e+000</T5>
 #       <AD590M>1.282462e-002</AD590M>
 #       <AD590B>-8.599824e+000</AD590B>
 #     </PressureSensor>
 #   </sensor>
 #   <sensor Channel="4" >
 #     <!-- Frequency 3, Temperature, 2 -->
 #     <TemperatureSensor SensorID="55" >
 #       <SerialNumber>5130</SerialNumber>
 #       <CalibrationDate>18-Mar-23</CalibrationDate>
 #       <UseG_J>1</UseG_J>
 #       <A>0.00000000e+000</A>
 #       <B>0.00000000e+000</B>
 #       <C>0.00000000e+000</C>
 #       <D>0.00000000e+000</D>
 #       <F0_Old>0.000</F0_Old>
 #       <G>4.36041069e-003</G>
 #       <H>6.40314647e-004</H>
 #       <I>2.15484838e-005</I>
 #       <J>1.88531001e-006</J>
 #       <F0>1000.000</F0>
 #       <Slope>1.00000000</Slope>
 #       <Offset>0.0000</Offset>
 #     </TemperatureSensor>
 #   </sensor>
 #   <sensor Channel="5" >
 #     <!-- Frequency 4, Conductivity, 2 -->
 #     <ConductivitySensor SensorID="3" >
 #       <SerialNumber>1766</SerialNumber>
 #       <CalibrationDate>18-Jan-23</CalibrationDate>
 #       <UseG_J>1</UseG_J>
 #       <!-- Cell const and series R are applicable only for wide range sensors.
  -->
 #       <SeriesR>0.0000</SeriesR>
 #       <CellConst>2000.0000</CellConst>
 #       <ConductivityType>0</ConductivityType>
 #       <Coefficients equation="0" >
 #         <A>0.00000000e+000</A>
 #         <B>0.00000000e+000</B>
 #         <C>0.00000000e+000</C>
 #         <D>0.00000000e+000</D>
 #         <M>0.0</M>
 #         <CPcor>-9.57000000e-008</CPcor>
 #       </Coefficients>
 #       <Coefficients equation="1" >
 #         <G>-4.12945799e+000</G>
 #         <H>4.88701129e-001</H>
 #         <I>-7.05780608e-004</I>
 #         <J>5.84314106e-005</J>
 #         <CPcor>-9.57000000e-008</CPcor>
 #         <CTcor>3.2500e-006</CTcor>
 #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
 #         <WBOTC>0.00000000e+000</WBOTC>
 #       </Coefficients>
 #       <Slope>1.00000000</Slope>
 #       <Offset>0.00000</Offset>
 #     </ConductivitySensor>
 #   </sensor>
 #   <sensor Channel="6" >
 #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
 #     <OxygenSensor SensorID="38" >
 #       <SerialNumber>4372</SerialNumber>
 #       <CalibrationDate>27-Mar-23</CalibrationDate>
 #       <Use2007Equation>1</Use2007Equation>
 #       <CalibrationCoefficients equation="0" >
 #         <!-- Coefficients for Owens-Millard equation. -->
 #         <Boc>0.0000</Boc>
 #         <Soc>0.0000e+000</Soc>
 #         <offset>0.0000</offset>
 #         <Pcor>0.00e+000</Pcor>
 #         <Tcor>0.0000</Tcor>
 #         <Tau>0.0</Tau>
 #       </CalibrationCoefficients>
 #       <CalibrationCoefficients equation="1" >
 #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
 later. -->
 #         <Soc>5.2078e-001</Soc>
 #         <offset>-0.5324</offset>
 #         <A>-4.6090e-003</A>
 #         <B> 1.7376e-004</B>
 #         <C>-2.8493e-006</C>
 #         <D0> 2.5826e+000</D0>
 #         <D1> 1.92634e-004</D1>
 #         <D2>-4.64803e-002</D2>
 #         <E> 3.6000e-002</E>
 #         <Tau20> 1.2400</Tau20>
 #         <H1>-3.3000e-002</H1>
 #         <H2> 5.0000e+003</H2>
 #         <H3> 1.4500e+003</H3>
 #       </CalibrationCoefficients>
 #     </OxygenSensor>
 #   </sensor>
 #   <sensor Channel="7" >
 #     <!-- A/D voltage 1, Fluorometer, Seapoint -->
 #     <FluoroSeapointSensor SensorID="11" >
 #       <SerialNumber>4186</SerialNumber>
 #       <CalibrationDate>Aug 2023</CalibrationDate>
 #       <!-- The following is an array index, not the actual gain setting. -->
 #       <GainSetting>2</GainSetting>
 #       <Offset>0.000</Offset>
 #     </FluoroSeapointSensor>
 #   </sensor>
 #   <sensor Channel="8" >
 #     <!-- A/D voltage 2, Altimeter -->
 #     <AltimeterSensor SensorID="0" >
 #       <SerialNumber>76341</SerialNumber>
 #       <CalibrationDate>2021-02-10</CalibrationDate>
 #       <ScaleFactor>15.000</ScaleFactor>
 #       <Offset>0.000</Offset>
 #     </AltimeterSensor>
 #   </sensor>
 #   <sensor Channel="9" >
 #     <!-- A/D voltage 3, PAR/Irradiance, Biospherical/Licor -->
 #     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
 #       <SerialNumber>70613</SerialNumber>
 #       <CalibrationDate>2021-02-24</CalibrationDate>
 #       <M>1.00000000</M>
 #       <B>0.00000000</B>
 #       <CalibrationConstant>8620689655.17000010</CalibrationConstant>
 #       <Multiplier>1.00000000</Multiplier>
 #       <Offset>-0.11660000</Offset>
 #     </PAR_BiosphericalLicorChelseaSensor>
 #   </sensor>
 #   <sensor Channel="10" >
 #     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
 #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
 #       <SerialNumber>FLRTD-2216</SerialNumber>
 #       <CalibrationDate>8-Mar-17</CalibrationDate>
 #       <ScaleFactor>1.20000000e+001</ScaleFactor>
 #       <!-- Dark output -->
 #       <Vblank>0.0440</Vblank>
 #     </FluoroWetlabECO_AFL_FL_Sensor>
 #   </sensor>
 #   <sensor Channel="11" >
 #     <!-- A/D voltage 5, Free -->
 #   </sensor>
 #   <sensor Channel="12" >
 #     <!-- A/D voltage 6, Transmissometer, WET Labs C-Star -->
 #     <WET_LabsCStar SensorID="71" >
 #       <SerialNumber>1185DR</SerialNumber>
 #       <CalibrationDate>2024-01-11</CalibrationDate>
 #       <M>19.8801</M>
 #       <B>-1.1650</B>
 #       <PathLength>0.250</PathLength>
 #     </WET_LabsCStar>
 #   </sensor>
 #   <sensor Channel="13" >
 #     <!-- A/D voltage 7, Transmissometer, WET Labs C-Star, 2 -->
 #     <WET_LabsCStar SensorID="71" >
 #       <SerialNumber>1883DG</SerialNumber>
 #       <CalibrationDate>2024-01-11</CalibrationDate>
 #       <M>20.2896</M>
 #       <B>-0.0487</B>
 #       <PathLength>0.250</PathLength>
 #     </WET_LabsCStar>
 #   </sensor>
 # </Sensors>
 # datcnv_date = Dec 15 2025 11:16:21, 7.26.7.129 [datcnv_vars = 16]
 # datcnv_in = C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\CTD\Raw CTD
 data\2024-020-0158.hex C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\CTD\2024-020-v2.XMLCON
 # datcnv_skipover = 0
 # datcnv_ox_hysteresis_correction = yes
 # wildedit_date = Dec 15 2025 11:21:14, 7.26.7.129
 # wildedit_in = C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\CTD\1_DATA
 CNV\2024-020-0158.cnv
 # wildedit_pass1_nstd = 2.0
 # wildedit_pass2_nstd = 5.0
 # wildedit_pass2_mindelta = 0.000e+000
 # wildedit_npoint = 50
 # wildedit_vars = prDM depSM t090C t190C c0S/m c1S/m flECO-AFL CStarTr1 par flSP
 # wildedit_excl_bad_scans = yes
 # alignctd_date = Dec 15 2025 11:23:45, 7.26.7.129
 # alignctd_in = C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\CTD\2_WILD
 EDIT\2024-020-0158.cnv
 # alignctd_adv = sbeox0V 2.500
 # celltm_date = Dec 15 2025 11:29:56, 7.26.7.129
 # celltm_in = C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\CTD\3_ALIGNC
 TD\2024-020-0158.cnv
 # celltm_alpha = 0.0245, 0.0245
 # celltm_tau = 9.5000, 9.5000
 # celltm_temp_sensor_use_for_cond = primary, secondary
 # Derive_date = Dec 15 2025 13:04:57, 7.26.7.129 [derive_vars = 4]
 # Derive_in = C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\CTD\4_CELLTM
 \2024-020-0158.cnv C:\Users\BEDARDJ\Desktop\Data_Processing\CTD-2024-020\CTD\2024-020-v2.XMLCON
 # derive_time_window_docdt = seconds: 2
 # derive_ox_tau_correction = yes
 # derive_time_window_dzdt = seconds: 2
 # file_type = ascii
  END*


 CTD Data Processing Notes:
 --------------------------
 Conductivity, Transmissivity and Fluorescence are nominal and
 unedited except that some records were removed in editing temperature and salinity.

 NOTE: While the fluorescence data are expressed in concentration units, they
 do not always compare well to extracted chlorophyll samples, particularly for casts
 far from shore. It is recommended that users check extracted chlorophyll values
 where available.

 There were 2 WetLabs CStar transmissometers in use during this cruise:
  Channel Transmissometer refers to sensor #1185DR (650nm - red)
  Channel Transmissometer:Green refers to sensor #1883DG (530nm - green)
 For comparison with other Institute of Ocean Sciences cruises, note that the
 transmissometer wavelength is 650nm unless otherwise stated.

 The SBE DO sensor has a fairly long response time so data accuracy is not as high
 when it is in motion as it is during stops for bottles. This will be especially true
 when vertical DO gradients are large. To get an estimate of the accuracy of the
 SBE DO data during downcasts (after recalibration) a rough comparison was made between
 downcast SBE DO and upcast titrated samples. Some of the difference will be due to
 problems with flushing of Niskin bottles and/or analysis errors, so the following
 statement likely underestimates SBE DO accuracy.

 Downcast (CTD files) Oxygen:Dissolved:SBE data for this cruise are considered, very roughly, to be:
        <0.08mL/L for pressure <200db
        <0.04mL/L for pressure between 200-300db
        <0.02mL/L for pressure >300db


 For details on the processing see the report: 2024-020_Processing_Report.doc.
 ---------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CALCULATED CHANNELS
    !   Name             Units    Fmla Pad    Coefficients
    !   ---------------- -------- ---- ------ ------------
        Salinity:T0:C0   PSS-78     10 -99    () (-0.2E-03 1)
    $END

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (-0.99E-02 1.0001)
    $END
!--1--- --2--- ---3---- ----4---- ---5---- --6--- --7-- ---8--- --9-- --10- --11-- -12-
!Pressu Depth  Temperat Conductiv Salinity Oxygen Oxyge Fluores Trans Trans  PAR   Numb
!re            ure:     ity:      :T0:C0   :      n:    cence:  missi missi        er_o
!              Primary  Primary            Dissol Disso URU:    vity  vity:        ~bin
!                                          ved:   lved: Wetlabs       Green        _rec
!                                          SBE    SBE                              ords
!------ ------ -------- --------- -------- ------ ----- ------- ----- ----- ------ ----
*END OF HEADER
    3.0    2.7  16.6741   3.63008  27.8408   7.42 324.8   3.757  33.6  41.6    0.2   16