*2024/07/22 14:37:12.12
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2023/09/19 02:06:45.000
    TIME INCREMENT      : 0 0 0 0.25 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 25
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : EE511F04
    NUMBER OF CHANNELS  : 6

    $TABLE: CHANNELS
    ! No Name                    Units           Minimum        Maximum
    !--- ----------------------- --------------- -------------- --------------
       1 Pressure                decibar         1.885          25.79267
       2 Depth                   metres          1.869          25.57233
       3 Temperature:Primary     'deg C (ITS90)' 12.29987       15.8853
       4 Conductivity:Primary    S/m             3.531471       3.78319
       5 Salinity:T0:C0          PSS-78          29.72353       30.21557
       6 Number_of_bin_records   n/a             2              3
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '       10  F       ' '     5
       5  -99   ' '        9  F       ' '     4
       6  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        E:\Telework\2023-078\Processing\derive\2023-078-0015.cnv
    $END

*ADMINISTRATION
    MISSION             : 2023-078
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Juvenile Herring
    SCIENTIST           : Boldt J.
    PLATFORM            : Walker Rock

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : Saanich Inlet
    EVENT NUMBER        : 15
    LATITUDE            :  48  39.54000 N  ! (deg min)
    LONGITUDE           : 123  27.95990 W  ! (deg min)
    WATER DEPTH         : 27
    TRANSECT_NUMBER     : 39                                    ! custom item

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-19plus
    SERIAL NUMBER       : 8118

    $TABLE: SENSORS
    !   Name                     Abs Depth       Serial No
    !   -----------------------  --------------  ----------
        Temperature              ' '             8118
        Conductivity             ' '             8118
        'Pressure:Strain Gauge'  ' '             8118
    $END
    $REMARKS
        Software version 2.8.0.119
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.3    2024/07/19 16:39:10       967       967
        MERGEHDR 1.3    2024/07/22 08:37:36       965       965
        ADTIMCH  4.4    2024/07/22 09:08:29       965       965
        CLIP     1.4.1  2024/07/22 10:29:47       888       233
        SHIFTDAT 3.5.1  2024/07/22 11:36:59       233       233
        DELETE   6.3    2024/07/22 11:37:21       233        62
        CTDEDIT  5.5.1  2024/07/22 12:55:57        62        61
        BINAVE   4.2.1  2024/07/22 14:24:41        61        25
        REMOVECH 8.2    2024/07/22 14:28:34        25        25
        HDREDIT2 3.2    2024/07/22 14:37:12 ?         ?
    $END
    $REMARKS
        -The following ADTIMCH parameters were used.
         Add      7.00 hours to times in header file section
        -The following CLIP parameters were used.
         Clip by Channel Range
         Clip Channel: Pressure [decibar]
         Min,Max =        1.300,   50000.000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -2.00
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    15.97 dbars
         Sample interval (from FILE section of header) =     0.250 seconds.
        -CTDEDIT  v5.5.1   2024/07/22 12:55:57
              1 record was deleted in this editing session.
             12 changes in channel Salinity:T0:C0
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Bin value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2024/07/22 14:28:34
         The following CHANNEL(S) were removed:
          Scan_Number
          Descent_Rate [m/s]
          Flag
        -HEADER EDITS: 2024/07/22 14:37:12
         Applied edit header: E:\Telework\2023-078\Processing\doc\2023-078-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  3: Temperature:Primary [deg C (ITS90)]
           Name:   Temperature ==> Temperature:Primary
         Channel  4: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.5
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE19plus  Data File:
      FileName = C:\Users\GFUser\Desktop\SeaBird_Data\SOG_Juv_Herring_Survey_2023\SB
    E19plus_01908118_2023_09_25_0015.hex
      Software version 2.8.0.119
      Temperature SN = 8118
      Conductivity SN = 8118
      System UpLoad Time = Sep 25 2023 14:04:02
      <ApplicationData>
      <Seaterm232>
      <SoftwareVersion>2.8.0.119</SoftwareVersion>
      <BuildDate>07-Nov-2018</BuildDate>
      </Seaterm232>
      </ApplicationData>
      <InstrumentState>
      <HardwareData DeviceType='SBE19plus' SerialNumber='01908118'>

         <Manufacturer>Sea-Bird Electronics, Inc.</Manufacturer>

         <FirmwareVersion>3.1.8</FirmwareVersion>

         <FirmwareDate>Mar  9 2016 16:22:29</FirmwareDate>

         <CommandSetVersion>1.4</CommandSetVersion>

         <PCBAssembly PCBSerialNum='237093' AssemblyNum='41054K'/>

         <PCBAssembly PCBSerialNum='237099' AssemblyNum='41059E'/>

         <PCBAssembly PCBSerialNum='231099' AssemblyNum='41606A'/>

         <PCBAssembly PCBSerialNum='237089' AssemblyNum='41967B'/>

         <MfgDate>05 Feb 2021</MfgDate>

         <InternalSensors>

            <Sensor id='Main Temperature'>

               <type>temperature0</type>

               <SerialNumber>01908118</SerialNumber>

            </Sensor>

            <Sensor id='Main Conductivity'>

               <type>conductivity-0</type>

               <SerialNumber>01908118</SerialNumber>

            </Sensor>

            <Sensor id='Main Pressure'>

               <type>strain-0</type>

               <SerialNumber>11840620</SerialNumber>

            </Sensor>

         </InternalSensors>

         <ExternalSensors>

            <Sensor id='volt 0'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 1'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 2'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 3'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 4'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 5'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='serial'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

         </ExternalSensors>

      </HardwareData>
      <StatusData DeviceType='SBE19plus' SerialNumber='01908118'>

         <DateTime>2023-09-25T13:59:00</DateTime>

         <LoggingState>not logging</LoggingState>

         <EventSummary numEvents='0'/>

         <Power>

            <vMain>13.2</vMain>

            <vLith>8.3</vLith>

            <iMain>61.4</iMain>

            <iPump>58.1</iPump>

         </Power>

         <MemorySummary>

            <Bytes>251383</Bytes>

            <Samples>22853</Samples>

            <SamplesFree>5958796</SamplesFree>

            <SampleLength>11</SampleLength>

            <Profiles>20</Profiles>

         </MemorySummary>

      </StatusData>
      <ConfigurationData DeviceType='SBE19plus' SerialNumber='01908118'>

         <ProfileMode>

            <ScansToAverage>1</ScansToAverage>

            <MinimumCondFreq>3119</MinimumCondFreq>

            <PumpDelay>60</PumpDelay>

            <AutoRun>no</AutoRun>

            <IgnoreSwitch>no</IgnoreSwitch>

         </ProfileMode>

         <Battery>

            <Type>alkaline</Type>

            <CutOff>7.5</CutOff>

         </Battery>

         <DataChannels>

            <ExtVolt0>no</ExtVolt0>

            <ExtVolt1>no</ExtVolt1>

            <ExtVolt2>no</ExtVolt2>

            <ExtVolt3>no</ExtVolt3>

            <ExtVolt4>no</ExtVolt4>

            <ExtVolt5>no</ExtVolt5>

            <SBE38>no</SBE38>

            <WETLABS>no</WETLABS>

            <OPTODE>no</OPTODE>

            <SBE63>no</SBE63>

            <SeaFET>no</SeaFET>

            <GTD>no</GTD>

         </DataChannels>

         <EchoCharacters>yes</EchoCharacters>

         <OutputExecutedTag>yes</OutputExecutedTag>

         <OutputFormat>raw HEX</OutputFormat>

      </ConfigurationData>
      <CalibrationCoefficients DeviceType='SBE19plus' SerialNumber='01908118'>

         <Calibration format='TEMP1' id='Main Temperature'>

            <SerialNum>01908118</SerialNum>

            <CalDate>08-Dec-22</CalDate>

            <TA0>1.204753e-03</TA0>

            <TA1>2.854336e-04</TA1>

            <TA2>-2.002582e-06</TA2>

            <TA3>2.162443e-07</TA3>

            <TOFFSET>0.000000e+00</TOFFSET>

         </Calibration>

         <Calibration format='WBCOND0' id='Main Conductivity'>

            <SerialNum>01908118</SerialNum>

            <CalDate>08-Dec-22</CalDate>

            <G>-1.016392e+00</G>

            <H>1.495383e-01</H>

            <I>-7.418173e-04</I>

            <J>7.807038e-05</J>

            <CPCOR>-9.570000e-08</CPCOR>

            <CTCOR>3.250000e-06</CTCOR>

            <CSLOPE>1.000000e+00</CSLOPE>

         </Calibration>

         <Calibration format='STRAIN0' id='Main Pressure'>

            <SerialNum>11840620</SerialNum>

            <CalDate>06-Dec-22</CalDate>

            <PA0>-7.158197e-01</PA0>

            <PA1>2.620567e-03</PA1>

            <PA2>2.477787e-11</PA2>

            <PTCA0>5.244721e+05</PTCA0>

            <PTCA1>-1.640087e+01</PTCA1>

            <PTCA2>1.863119e-01</PTCA2>

            <PTCB0>2.526912e+01</PTCB0>

            <PTCB1>8.250000e-04</PTCB1>

            <PTCB2>0.000000e+00</PTCB2>

            <PTEMPA0>-6.535042e+01</PTEMPA0>

            <PTEMPA1>5.161537e+01</PTEMPA1>

            <PTEMPA2>-2.641141e-01</PTEMPA2>

            <POFFSET>0.000000e+00</POFFSET>

            <PRANGE>8.700000e+02</PRANGE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 0'>

            <OFFSET>-4.496400e-02</OFFSET>

            <SLOPE>1.250272e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 1'>

            <OFFSET>-4.571300e-02</OFFSET>

            <SLOPE>1.250106e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 2'>

            <OFFSET>-4.585600e-02</OFFSET>

            <SLOPE>1.251101e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 3'>

            <OFFSET>-4.565400e-02</OFFSET>

            <SLOPE>1.250909e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 4'>

            <OFFSET>-4.569900e-02</OFFSET>

            <SLOPE>1.249737e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 5'>

            <OFFSET>-4.601900e-02</OFFSET>

            <SLOPE>1.251242e+00</SLOPE>

         </Calibration>

         <Calibration format='FREQ0' id='external frequency channel'>

            <EXTFREQSF>1.000020e+00</EXTFREQSF>

         </Calibration>

      </CalibrationCoefficients>
      <EventCounters DeviceType='SBE19plus' SerialNumber='01908118'>

         <EventSummary numEvents='0'/>

      </EventCounters></InstrumentState>
      <Headers>

      cast  15 18 Sep 2023 19:06:45 samples 16889 to 17855, avg = 1, stop = mag swit
    ch

    # nquan = 8
    # nvalues = 967
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = tv290C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = sal00: Salinity, Practical [PSU]
    # name 6 = dz/dtM: Descent Rate [m/s], WS = 2
    # name 7 = flag: flag
    # span 0 =          1,        967
    # span 1 =      0.019,     25.967
    # span 2 =      0.018,     25.746
    # span 3 =    12.2889,    16.9763
    # span 4 =   0.000004,   3.805316
    # span 5 =     0.0080,    30.5664
    # span 6 =     -0.720,      1.705
    # span 7 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.25
    # start_time = Sep 18 2023 19:06:45 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="3" >
    #   <sensor Channel="1" >
    #     <!-- Count, Temperature -->
    #     <TemperatureSensor SensorID="58" >
    #       <SerialNumber>8118</SerialNumber>
    #       <CalibrationDate>18-Feb-21</CalibrationDate>
    #       <A0>1.22109548e-003</A0>
    #       <A1>2.79082418e-004</A1>
    #       <A2>-1.18275076e-006</A2>
    #       <A3>1.81093277e-007</A3>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 0, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>8118</SerialNumber>
    #       <CalibrationDate>18-Feb-21</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01306667e+000</G>
    #         <H>1.48392906e-001</H>
    #         <I>-4.27601206e-004</I>
    #         <J>5.47401568e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>8118</SerialNumber>
    #       <CalibrationDate>12-Feb-21</CalibrationDate>
    #       <PA0>-7.56355003e-001</PA0>
    #       <PA1>2.62363700e-003</PA1>
    #       <PA2>2.15053930e-011</PA2>
    #       <PTEMPA0>-6.53619227e+001</PTEMPA0>
    #       <PTEMPA1>5.16616510e+001</PTEMPA1>
    #       <PTEMPA2>-2.93216773e-001</PTEMPA2>
    #       <PTCA0>5.24439966e+005</PTCA0>
    #       <PTCA1>-1.69540914e+001</PTCA1>
    #       <PTCA2>1.92328990e-001</PTCA2>
    #       <PTCB0>2.52691250e+001</PTCB0>
    #       <PTCB1>8.25000000e-004</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    # </Sensors>
    # datcnv_date = Jul 19 2024 14:47:45, 7.26.7.129 [datcnv_vars = 5]
    # datcnv_in = E:\Telework\2023-078\Unprocessed\CTD\SBE19plus_01908118_2023_09_25
    _0015.hex E:\Telework\2023-078\Unprocessed\SBE19plusV2_8118.xmlcon
    # datcnv_skipover = 0
    # filter_date = Jul 19 2024 16:05:59, 7.26.7.129
    # filter_in = E:\Telework\2023-078\Processing\convert\2023-078-0015.cnv
    # filter_low_pass_tc_A = 0.500
    # filter_low_pass_tc_B = 1.000
    # filter_low_pass_A_vars = c0S/m
    # filter_low_pass_B_vars =
    # alignctd_date = Jul 19 2024 16:07:20, 7.26.7.129
    # alignctd_in = E:\Telework\2023-078\Processing\filter\2023-078-0015.cnv
    # alignctd_adv = tv290C 0.500, c0S/m 0.500
    # Derive_date = Jul 19 2024 16:08:22, 7.26.7.129 [derive_vars = 2]
    # Derive_in = E:\Telework\2023-078\Processing\align\2023-078-0015.cnv E:\Telewor
    k\2023-078\Processing\doc\2023-078_ctd.xmlcon
    # derive_time_window_dzdt = seconds: 2
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to clean salinity and to remove 1 record corrupted by
     shed wake from the bottom of the cast.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    There was no calibration sampling.
    The CTD had been calibrated at the factory in February 2021, so significant
    drift is not expected.

    For details on the processing see document: 2023-078_Processing_Report.doc.
!--1--- --2--- ---3---- ----4---- ---5---- -6--
!Pressu Depth  Temperat Conductiv Salinity Numb
!re            ure:     ity:      :T0:C0   er_o
!              Primary  Primary            ~bin
!                                          _rec
!                                          ords
!------ ------ -------- --------- -------- ----
*END OF HEADER
    2.0    1.9  15.8853   3.78319  29.7302    2
    3.0    2.9  15.8796   3.78013  29.7235    3
    4.0    4.0  15.8566   3.76435  29.7286    2
    5.0    5.0  15.0903   3.71109  29.8291    3
    6.0    6.1  13.5869   3.62857  29.9955    2
    7.0    6.9  13.1678   3.59064  30.0308    2
    8.0    7.9  12.9996   3.57132  30.0348    3
    9.0    8.9  12.8550   3.56057  30.0524    2
   10.0   10.0  12.7894   3.55508  30.0527    3
   11.0   11.0  12.7582   3.55229  30.0509    2
   12.0   11.8  12.7409   3.55079  30.0503    2
   13.0   12.9  12.7208   3.54870  30.0463    3
   14.0   13.9  12.6521   3.54512  30.0668    2
   15.0   14.8  12.5553   3.54122  30.1071    2
   16.0   15.8  12.4952   3.53780  30.1224    3
   17.0   16.9  12.4622   3.53579  30.1295    2
   18.0   17.9  12.4382   3.53450  30.1361    3
   19.0   18.9  12.4228   3.53375  30.1409    2
   20.0   19.9  12.4156   3.53380  30.1468    3
   21.0   20.9  12.4081   3.53411  30.1554    2
   22.0   21.9  12.4010   3.53425  30.1621    3
   23.0   22.9  12.3925   3.53390  30.1651    2
   24.0   23.9  12.3675   3.53285  30.1749    3
   25.0   24.8  12.3391   3.53194  30.1888    2
   26.0   25.6  12.2999   3.53147  30.2156    3