*2024/08/12 14:17:38.23
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2023/08/12 15:17:31.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 13
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 162CFF8F
    NUMBER OF CHANNELS  : 13

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Pressure                    decibar         4.112          15.9
       2 Depth                       metres          4.067          15.743
       3 Temperature:Secondary       'deg C (ITS90)' 0.8947         9.1496
       4 Transmissivity              %/metre         3.6            43
       5 Fluorescence:URU:Seapoint   mg/m^3          0.183          2.239
       6 PAR                         uE/m^2/sec      15.784         93.633
       7 PAR:Reference               uE/m^2/sec      326.912        345.634
       8 Salinity:T1:C1              PSS-78          27.3769        31.0733
       9 Oxygen:Dissolved:SBE        mL/L            6.876          9.058
      10 Oxygen:Dissolved:SBE        umol/kg         300.7239       394.7043
      11 Conductivity:Secondary      S/m             2.676785       3.020771
      12 Turbidity:Seapoint          FTU             3.907          9.503
      13 Number_of_bin_records       n/a             30             78
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        6  F       ' '     1
       5  -99   ' '        8  F       ' '     3
       6  -99   ' '        7  F       ' '     1
       7  -99   ' '        7  F       ' '     1
       8  -99   ' '        9  F       ' '     4
       9  -99   ' '        7  F       ' '     2
      10  -99   ' '        6  F       ' '     1
      11  -99   ' '       10  F       ' '     5
      12  -99   ' '        7  F       ' '     1
      13  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        E:\Telework\2023-024\Processing\derive\2023-024-0091.cnv
    $END

*ADMINISTRATION
    MISSION             : 2023-024
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Canadian Beaufort Sea Marine Ecosystem Assessment
    SCIENTIST           : Eert J.
    PLATFORM            : Frosti

*LOCATION
    GEOGRAPHIC AREA     : Beaufort Sea
    STATION             : CPB_01
    EVENT NUMBER        : 91
    LATITUDE            :  70  32.21000 N  ! (deg min)
    LONGITUDE           : 127  43.65000 W  ! (deg min)
    WATER DEPTH         : 22
    ALTIMETER (M)       : 6.11                                  ! custom item
    $REMARKS
        Altimeter value is distance from bottom and is calculated as the
        median of the deepest 2 metres of data.
    $END

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 1189

    $TABLE: SENSORS
    !   Name                                 Abs Depth       Serial No
    !   -----------------------------------  --------------  ----------
        Temperature                          ' '             5830
        Conductivity                         ' '             2984
        'Pressure:Digiquartz with TC'        ' '             130015
        Temperature:2                        ' '             5831
        Conductivity:2                       ' '             4339
        Fluorometer:Seapoint                 ' '             2859
        'Transmissometer:WET Labs C-Star'    ' '             1666
        'Oxygen:SBE 43'                      ' '             1489
        Altimeter                            ' '             'VA 500 85484'
        PAR/Irradiance:Biospherical/Licor    ' '             70501
        'Turbidity Meter:Seapoint'           ' '             11074
        'User Polynomial'                    ' '             1
        'User Polynomial:2'                  ' '             2
        Unavailable                          ' '             ' '
        SPAR:Biospherical/Licor              ' '             20279
    $END
    $REMARKS
        Software Version Seasave V 7.26.7.107
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.3    2024/08/08 13:43:10     17276     17276
        CLEAN    5.3    2024/08/08 13:48:13     17276     17276
        CLIP     1.4.1  2024/08/08 13:50:56     17276      7377
        MERGEHDR 1.3    2024/08/08 14:46:49      7377      7377
        SHIFTDAT 3.5.1  2024/08/08 16:00:22      7377      7377
        SHIFTDAT 3.5.1  2024/08/08 16:02:12      7377      7377
        SHIFTDAT 3.5.1  2024/08/08 16:03:48      7377      7377
        DELETE   6.3    2024/08/08 16:05:19      7377       907
        CTDEDIT  5.5.1  2024/08/09 11:31:23       907       738
        FILTERS  4.3    2024/08/12 13:37:59       738       738
        BINAVE   4.2.1  2024/08/12 13:38:30       738        13
        CHGUNITS 3.2    2024/08/12 13:40:36        13        13
        REORDER  1.3.1  2024/08/12 13:43:04 ?         ?
        REMOVECH 8.2    2024/08/12 13:47:07        13        13
        REMOVECH 8.2    2024/08/12 14:10:40        13        13
        HDREDIT2 3.2    2024/08/12 14:17:38 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2024/08/08 13:47:17 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First, Last Records =   9900, end from event list: 2023-024-clip.csv
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:URU:Seapoint
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 24.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.70
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Secondary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.40
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to     6.24 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT  v5.5.1   2024/08/09 11:31:23
            169 records were deleted in this editing session.
              2 changes in channel Salinity:T1:C1
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -CHANGE units:
         Temperature reference channel: Temperature:Secondary
         Salinity    reference channel: Salinity:T1:C1
         'Oxygen:Dissolved:SBE' changed from mL/L    to umol/kg
        -REMOVECH 2024/08/12 13:47:07
         The following CHANNEL(S) were removed:
          Temperature:Primary [deg C (ITS90)]
          Salinity:T0:C0 [PSS-78]
          Conductivity:Primary [S/m]
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Altimeter [metres]
          Status:Pump
          Descent_Rate [m/s]
          Flag
        -REMOVECH 2024/08/12 14:10:40
         The following CHANNEL(S) were removed:
          uploy0
          upoly1
        -HEADER EDITS: 2024/08/12 14:17:38
         Applied edit header: E:\Telework\2023-024\Processing\doc\2023-024_hdr.txt
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
         Channel  4: Transmissivity [%/metre]
           Name:   Transmissivity:1 ==> Transmissivity
           Format: F8.3 ==> F6.1
         Channel  6: PAR [uE/m^2/sec]
           Units:  umol/m^2/sec ==> uE/m^2/sec
           Format: F11.3 ==> F7.1
         Channel  8: Salinity:T1:C1 [PSS-78]
           Format: F11.4 ==> F9.4
         Channel 11: Conductivity:Secondary [S/m]
           Format: F11.6 ==> F10.5
         Channel  7: PAR:Reference [uE/m^2/sec]
           Format: F11.3 ==> F7.1
         Channel 12: Turbidity:Seapoint [FTU]
           Format: F8.3 ==> F7.1
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\FROSTI\2023-024 Frosti CBS-MEA\raw\2023-024_0091.hex
      Software Version Seasave V 7.26.7.107
      Temperature SN = 5830
      Conductivity SN = 2984
      Number of Bytes Per Scan = 44
      Number of Voltage Words = 5
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Aug 12 2023 15:17:31
      NMEA Latitude = 70 32.21 N
      NMEA Longitude = 127 43.65 W
      NMEA UTC (Time) = Aug 12 2023  15:17:36
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.2
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      surface PAR voltage added to scan
      A/D offset = 4
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      autorun on power up is disabled
      S>
       Ship: FV Frosti
       Station: CPB_01
       Operator: JE
      System UTC = Aug 12 2023 15:17:31
    # nquan = 22
    # nvalues = 17276
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = depSM: Depth [salt water, m]
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 5 = c0S/m: Conductivity [S/m]
    # name 6 = c1S/m: Conductivity, 2 [S/m]
    # name 7 = CStarTr0: Beam Transmission, WET Labs C-Star [%]
    # name 8 = flSP: Fluorescence, Seapoint
    # name 9 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 10 = par: PAR/Irradiance, Biospherical/Licor
    # name 11 = spar: SPAR, Biospherical/Licor
    # name 12 = altM: Altimeter [m]
    # name 13 = seaTurbMtr: Turbidity, Seapoint [FTU]
    # name 14 = upoly0: User Polynomial
    # name 15 = upoly1: User Polynomial, 2
    # name 16 = pumps: Pump Status
    # name 17 = sal00: Salinity, Practical [PSU]
    # name 18 = sal11: Salinity, Practical, 2 [PSU]
    # name 19 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 20 = dz/dtM: Descent Rate [m/s], WS = 2
    # name 21 = flag: flag
    # span 0 =          1,      17276
    # span 1 =     -0.880,     16.244
    # span 2 =     -0.871,     16.079
    # span 3 =     0.4745,     9.1664
    # span 4 =     0.4628,     9.1578
    # span 5 =   0.022906,   3.029064
    # span 6 =   0.046262,   3.027919
    # span 7 =     2.2109,    81.0259
    # span 8 = 1.2210e-02, 2.4383e+00
    # span 9 =     1.7937,     2.8327
    # span 10 = 1.2200e+01, 6.4578e+02
    # span 11 = 3.0089e+02, 5.0027e+02
    # span 12 =       0.00,     100.00
    # span 13 =      0.000,     25.000
    # span 14 =  1.4249084,  1.5726496
    # span 15 =  2.1611722,  2.8901099
    # span 16 =          0,          1
    # span 17 =     0.1751,    31.1909
    # span 18 =     0.3588,    31.1906
    # span 19 =     5.5896,    10.8384
    # span 20 =     -0.847,      0.944
    # span 21 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Aug 12 2023 15:17:31 [System UTC, header]
    # bad_flag = -9.990e-29
    # <Sensors count="15" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>5830</SerialNumber>
    #       <CalibrationDate>30-Dec-2022</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.46031200e-003</G>
    #       <H>6.86112600e-004</H>
    #       <I>2.89405900e-005</I>
    #       <J>2.32168100e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2984</SerialNumber>
    #       <CalibrationDate>28-Dec-22</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91880754e+000</G>
    #         <H>1.34727929e+000</H>
    #         <I>9.47711519e-005</I>
    #         <J>7.04291201e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>130015</SerialNumber>
    #       <CalibrationDate>23-Dec-2013</CalibrationDate>
    #       <C1>-3.910244e+004</C1>
    #       <C2>-6.905078e-001</C2>
    #       <C3>1.266300e-002</C3>
    #       <D1>3.386100e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.011070e+001</T1>
    #       <T2>-5.217135e-004</T2>
    #       <T3>4.251900e-006</T3>
    #       <T4>2.685320e-009</T4>
    #       <Slope>1.00000000</Slope>
    #       <Offset>-0.42000</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.278027e-002</AD590M>
    #       <AD590B>-8.590135e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>5831</SerialNumber>
    #       <CalibrationDate>17-Dec-2022</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.44386800e-003</G>
    #       <H>6.81543600e-004</H>
    #       <I>2.84485400e-005</I>
    #       <J>2.24796600e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>4339</SerialNumber>
    #       <CalibrationDate>26-Nov-19</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.90175129e+000</G>
    #         <H>1.31112528e+000</H>
    #         <I>-2.52382835e-003</I>
    #         <J>2.42149193e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>2859</SerialNumber>
    #       <CalibrationDate>31 May 2018</CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>0</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Transmissometer, WET Labs C-Star -->
    #     <WET_LabsCStar SensorID="71" >
    #       <SerialNumber>1666</SerialNumber>
    #       <CalibrationDate>13 June 2023</CalibrationDate>
    #       <M>19.0580</M>
    #       <B>-0.0230</B>
    #       <PathLength>0.250</PathLength>
    #     </WET_LabsCStar>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1489</SerialNumber>
    #       <CalibrationDate>22-Dec-2022</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>5.1221e-001</Soc>
    #         <offset>-0.5084</offset>
    #         <A>-4.0633e-003</A>
    #         <B> 2.1463e-004</B>
    #         <C>-3.1542e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.4500</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Altimeter -->
    #     <AltimeterSensor SensorID="0" >
    #       <SerialNumber>VA 500 85484</SerialNumber>
    #       <CalibrationDate>27-01-2023</CalibrationDate>
    #       <ScaleFactor>15.000</ScaleFactor>
    #       <Offset>0.000</Offset>
    #     </AltimeterSensor>
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
    #     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
    #       <SerialNumber>70501</SerialNumber>
    #       <CalibrationDate>04/04/2016</CalibrationDate>
    #       <M>1.00000000</M>
    #       <B>0.00000000</B>
    #       <CalibrationConstant>10593000000.00000000</CalibrationConstant>
    #       <Multiplier>1.00000000</Multiplier>
    #       <Offset>-0.09573528</Offset>
    #     </PAR_BiosphericalLicorChelseaSensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Turbidity Meter, Seapoint -->
    #     <OBS_SeapointTurbiditySensor SensorID="33" >
    #       <SerialNumber>11074</SerialNumber>
    #       <CalibrationDate>new 03/23/07</CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>3</GainSetting>
    #       <ScaleFactor>1.000</ScaleFactor>
    #     </OBS_SeapointTurbiditySensor>
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, User Polynomial -->
    #     <UserPolynomialSensor SensorID="61" >
    #       <SerialNumber>1</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <SensorName></SensorName>
    #       <A0>0.00000000</A0>
    #       <A1>1.00000000</A1>
    #       <A2>0.00000000</A2>
    #       <A3>0.00000000</A3>
    #     </UserPolynomialSensor>
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, User Polynomial, 2 -->
    #     <UserPolynomialSensor SensorID="61" >
    #       <SerialNumber>2</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <SensorName></SensorName>
    #       <A0>0.00000000</A0>
    #       <A1>1.00000000</A1>
    #       <A2>0.00000000</A2>
    #       <A3>0.00000000</A3>
    #     </UserPolynomialSensor>
    #   </sensor>
    #   <sensor Channel="14" >
    #     <!-- SPAR voltage, Unavailable -->
    #   </sensor>
    #   <sensor Channel="15" >
    #     <!-- SPAR voltage, SPAR, Biospherical/Licor -->
    #     <SPAR_Sensor SensorID="51" >
    #       <SerialNumber>20279</SerialNumber>
    #       <CalibrationDate>2016-04-04</CalibrationDate>
    #       <ConversionFactor>2.9690e+003</ConversionFactor>
    #       <RatioMultiplier>1.00000000</RatioMultiplier>
    #     </SPAR_Sensor>
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 06 2024 15:27:42, 7.26.7.129 [datcnv_vars = 17]
    # datcnv_in = E:\Telework\2023-024\Unprocessed\CTD\2023-024-0091.hex E:\Telework
    \2023-024\Processing\doc\2023-024-ctd.XMLCON
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Aug 08 2024 10:03:09, 7.26.7.129
    # wildedit_in = E:\Telework\2023-024\Processing\convert\2023-024-0091.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM depSM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Aug 08 2024 10:05:39, 7.26.7.129
    # alignctd_in = E:\Telework\2023-024\Processing\wildedit\2023-024-0091.cnv
    # alignctd_adv = sbeox0V 3.000
    # celltm_date = Aug 08 2024 10:07:58, 7.26.7.129
    # celltm_in = E:\Telework\2023-024\Processing\align\2023-024-0091.cnv
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Aug 08 2024 10:20:30, 7.26.7.129 [derive_vars = 4]
    # Derive_in = E:\Telework\2023-024\Processing\celltm\2023-024-0091.cnv E:\Telewo
    rk\2023-024\Processing\doc\2023-024-ctd.XMLCON
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # derive_time_window_dzdt = seconds: 2
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    The descent rate of the CTD was very noisy with some complete reversals
     of direction.
    CTDEDIT was used to remove records corrupted by shed wakes; salinity was
     cleaned.
    ---------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    Transmissivity, Fluorescence, Turbidity, PAR and Surface PAR data are nominal and
    unedited, except that some records were removed in editing temperature and salinity.

    Salinity:T1:C1 values compared well with bottle samples.

    There was no dissolved oxygen calibration sampling.

    For details see file 2023-024_Processing_Report.doc
!--1--- --2--- ---3---- --4-- ---5--- --6--- --7--- ---8---- --9--- --10- ----11--- --12-- -13-
!Pressu Depth  Temperat Trans Fluores  PAR   PAR:   Salinity Oxygen Oxyge Conductiv Turbid Numb
!re            ure:     missi cence:         Refere :T1:C1   :      n:    ity:      ity:   er_o
!              Secondar vity  URU:           nce             Dissol Disso Secondary Seapoi ~bin
!              y              Seapoin                        ved:   lved:           nt     _rec
!                             t                              SBE    SBE                    ords
!------ ------ -------- ----- ------- ------ ------ -------- ------ ----- --------- ------ ----
*END OF HEADER
    4.1    4.1   9.1145  43.0   0.188   93.6  326.9  27.3772   6.88 300.9   2.98514    3.9   39
    5.0    4.9   9.1146  43.0   0.183   83.1  327.5  27.3769   6.88 300.9   2.98515    3.9   58
    6.0    5.9   9.1146  42.9   0.186   68.8  329.2  27.3770   6.88 301.0   2.98520    3.9   61
    7.0    6.9   9.1135  43.0   0.187   65.0  329.5  27.3774   6.88 300.9   2.98520    3.9   47
    8.0    7.9   9.1123  42.9   0.192   59.9  333.3  27.3790   6.88 300.9   2.98529    3.9   30
    9.1    9.0   9.1127  43.0   0.200   53.8  334.8  27.3805   6.88 300.7   2.98552    3.9   69
   10.0    9.9   9.1220  42.7   0.210   49.8  337.1  27.3987   6.88 301.0   2.98805    3.9   78
   11.1   10.9   9.1496  39.9   0.228   45.6  338.7  27.5165   6.89 301.1   3.00184    4.0   74
   11.9   11.8   9.0627  31.9   0.304   44.1  340.7  27.7762   6.95 304.1   3.02077    4.4   77
   13.0   12.9   5.5547   8.0   0.987   41.6  341.0  29.6390   7.89 344.2   2.92173    7.4   38
   14.1   13.9   2.0143   3.6   1.870   35.3  344.1  30.8277   8.45 368.3   2.74509    9.2   75
   14.9   14.8   1.2576   4.4   2.167   25.6  343.4  30.9816   8.81 384.2   2.69798    9.2   60
   15.9   15.7   0.8947   4.5   2.239   15.8  345.6  31.0733   9.06 394.7   2.67679    9.5   32