*2023/11/06 13:52:06.57
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2023/07/26 21:05:33.999
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 50
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : B96B33EA
    NUMBER OF CHANNELS  : 10

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         2              51
       2 Depth                      metres          2.033          50.487
       3 Temperature:Primary        'deg C (ITS90)' 10.6638        13.4409
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.211          4.307
       5 Salinity:T0:C0             PSS-78          29.5906        30.7229
       6 PAR                        uE/m^2/sec      0.122          709.388
       7 Oxygen:Dissolved:SBE       mL/L            3.5            5.155
       8 Oxygen:Dissolved:SBE       umol/kg         152.7203       225.2395
       9 Conductivity:Primary       S/m             3.437552       3.560044
      10 Number_of_bin_records      n/a             16             31
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     1
       7  -99   ' '        7  F       ' '     2
       8  -99   ' '        6  F       ' '     1
       9  -99   ' '       10  F       ' '     5
      10  -99   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        E:\Telework\2023-023\Processing\derive\2023-023-0056.cnv
    $END

*ADMINISTRATION
    MISSION             : 2023-023
    AGENCY              : IOS,Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Plankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : CBE2
    EVENT NUMBER        : 56
    LATITUDE            :  48  44.20200 N  ! (deg min)
    LONGITUDE           : 123  34.32700 W  ! (deg min)
    WATER DEPTH         : 60

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251255

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             6448
        Conductivity                       ' '             6147
        'Pressure:Strain Gauge'            ' '             1255
        PAR/Logarithmic:Satlantic          ' '             2274
        'Oxygen:SBE 43'                    ' '             4378
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-8046
    $END
    $REMARKS
        <SoftwareVersion>1.0.4</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.3    2023/10/30 16:42:20      5267      5267
        CLEAN    5.3    2023/10/30 16:42:36      5255      5255
        ADTIMCH  4.4    2023/10/30 16:42:52      5255      5255
        CLIP     1.4.1  2023/10/30 16:43:26      5255      2226
        SHIFTDAT 3.5    2023/10/30 16:44:03      2226      2226
        DELETE   6.3    2023/10/30 16:44:13      2226       990
        CTDEDIT  5.5.0  2023/10/31 14:58:24       990       978
        BINAVE   4.2.1  2023/11/06 13:21:08       978        50
        REMOVECH 8.2    2023/11/06 13:22:10        50        50
        CHGUNITS 3.2    2023/11/06 13:22:28        50        50
        REORDER  1.3.1  2023/11/06 13:24:03 ?         ?
        HDREDIT2 3.2    2023/11/06 13:52:06 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2023/10/30 16:42:24 20
         Reset #RECS, MIN & MAX values in header.
         Insert Pad Values in Channel: Fluorescence:URU:Wetlabs:ECO-AFL [mg/m^3]
           where channel Fluorescence:URU:Wetlabs:ECO-AFL [mg/m^3] is in the range -100
               47 data records in pad range.
         Set event to last  4 characters of file name
        -The following ADTIMCH parameters were used.
         Add      9.07 hours to times in header file section
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First, Last Records =   3030, end from event list: clip.csv
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary [S/m]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  2.00
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    7
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   8 points) will be deleted.
         Drop rate applies in the range    10.00 to    41.02 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.5.0   2023/10/31 14:58:24
             12 records were deleted in this editing session.
         No data values were changed.
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Bin value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2023/11/06 13:22:10
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary [deg C (ITS90)]
         Salinity    reference channel: Salinity:T0:C0 [PSS-78]
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2023/11/06 13:52:06
         Applied edit header: E:\Telework\2023-023\Processing\doc\2023-023-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F9.4 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  7: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  9: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.5
         Channel 10: Number_of_bin_records [n/a]
           Pad:    ' ' ==> -99
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: PAR [uE/m^2/sec]
           Format: F11.3 ==> F7.1
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 48 44.202 N
      ** Longitude: 123 34.327 W
      ** Station: CBE2
      ** Depth: 60 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0.4</SoftwareVersion>
               <BuildDate>Mar 23 2021 08:54:28</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251255'>
               <DateTime>2023-07-26T12:01:19</DateTime>
               <EventSummary numEvents='75'/>
               <Power>
                  <vBattery>15.0</vBattery>
                  <vExternal>0.3</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>9.8</iExt>
                  <iSys>56.2</iSys>
                  <iCPU>20.0</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>31719424</Bytes>
                  <BytesFree>1984495616</BytesFree>
                  <Samples>440547</Samples>
                  <SamplesFree>27562439</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251255'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0.4</FirmwareVersion>
               <FirmwareDate>Mar 23 2021 08:54:28</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='271365' AssemblyNum='41842E'/>
               <PCBAssembly PCBSerialNum='271367' AssemblyNum='41843D'/>
               <MfgDate>2023-02-02T08:30:30</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-6448</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>04-6147</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>12364712</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>PAR</Type>
                     <SerialNum>PAR-2274</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>DO</Type>
                     <SerialNum>4378</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>CHL</Type>
                     <SerialNum>8046</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251255'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>3000</mincondfreq>
                  <pumpdelay>60</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>0</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251255'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>12364712</SerialNum>
                  <Pcaldate>2023-02-13</Pcaldate>
                  <PA0>1.669452e-01</PA0>
                  <PA1>2.757409e-04</PA1>
                  <PA2>-6.637241e-14</PA2>
                  <PTEMPA0>-7.156559e+01</PTEMPA0>
                  <PTEMPA1>4.895334e+01</PTEMPA1>
                  <PTEMPA2>-7.272807e-02</PTEMPA2>
                  <PTCA0>8.388920e+06</PTCA0>
                  <PTCA1>5.351747e+01</PTCA1>
                  <PTCA2>-1.188608e+00</PTCA2>
                  <PTCB0>2.512468e+01</PTCB0>
                  <PTCB1>-7.500000e-05</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>1.450000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251255'>
               <EventSummary numEvents='75'/>
               <Event type='Power On Reset' count='75'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2023-07-26T12:01:22</startTime>
            <Data>
    # nquan = 12
    # nvalues = 5267
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = par/sat/log: PAR/Logarithmic, Satlantic [umol photons/m^2/sec]
    # name 8 = dz/dtM: Descent Rate [m/s]
    # name 9 = sal00: Salinity, Practical [PSU]
    # name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 1
    # name 11 = flag: flag
    # span 0 =          1,       5267
    # span 1 =      0.388,     51.024
    # span 2 =      0.384,     50.585
    # span 3 =   -12.0050,    17.4122
    # span 4 =   0.019213,   3.774900
    # span 5 =    -0.1430,    64.8570
    # span 6 =     1.7385,     2.6432
    # span 7 = 8.5597e-02, 2.3919e+03
    # span 8 =     -0.883,      0.896
    # span 9 =     0.2626,    30.9909
    # span 10 =   -98.8565,    11.1598
    # span 11 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Jul 26 2023 12:01:22 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>6448</SerialNumber>
    #       <CalibrationDate>04-Feb-23</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.33293641e-003</G>
    #       <H>6.39082893e-004</H>
    #       <I>2.20950583e-005</I>
    #       <J>2.06770154e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>6147</SerialNumber>
    #       <CalibrationDate>18-Jan-23</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01031449e+001</G>
    #         <H>1.39347559e+000</H>
    #         <I>-1.63382489e-003</I>
    #         <J>1.84236483e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1255</SerialNumber>
    #       <CalibrationDate>13-Feb-23</CalibrationDate>
    #       <PA0>1.66945152e-001</PA0>
    #       <PA1>2.75740921e-004</PA1>
    #       <PA2>-6.63724103e-014</PA2>
    #       <PTEMPA0>-7.15655855e+001</PTEMPA0>
    #       <PTEMPA1>4.89533360e+001</PTEMPA1>
    #       <PTEMPA2>-7.27280730e-002</PTEMPA2>
    #       <PTCA0>8.38892017e+006</PTCA0>
    #       <PTCA1>5.35174656e+001</PTCA1>
    #       <PTCA2>-1.18860817e+000</PTCA2>
    #       <PTCB0>2.51246775e+001</PTCB0>
    #       <PTCB1>-7.50000000e-005</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, PAR/Logarithmic, Satlantic -->
    #     <PARLog_SatlanticSensor SensorID="76" >
    #       <SerialNumber>2274</SerialNumber>
    #       <CalibrationDate>01/25/23</CalibrationDate>
    #       <a0>9.7164e-001</a0>
    #       <a1>8.0889e-001</a1>
    #       <Im>1.3589e+000</Im>
    #       <ConversionUnits>1</ConversionUnits>
    #       <Multiplier>1.0000e+000</Multiplier>
    #     </PARLog_SatlanticSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Unknown 1, Free -->
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>4378</SerialNumber>
    #       <CalibrationDate>28-Mar-23</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.6069e-001</Soc>
    #         <offset>-0.5173</offset>
    #         <A>-3.4533e-003</A>
    #         <B> 1.1469e-004</B>
    #         <C>-1.9161e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-8046</SerialNumber>
    #       <CalibrationDate>21-Apr-2023</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0110</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 30 2023 12:03:13, 7.26.7.129 [datcnv_vars = 9]
    # datcnv_in = E:\Telework\2023-023\Unprocessed\CTD Data\2023-023-0056.xml E:\Tel
    ework\2023-023\Processing\doc\2023-023-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Oct 30 2023 16:36:03, 7.26.7.129
    # wildedit_in = E:\Telework\2023-023\Processing\convert\2023-023-0056.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # wfilter_date = Oct 30 2023 16:37:13, 7.26.7.129
    # wfilter_in = E:\Telework\2023-023\Processing\wildedit\2023-023-0056.cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action t090C = cosine, 16
    # wfilter_action c0S/m = cosine, 16
    # alignctd_date = Oct 30 2023 16:40:44, 7.26.7.129
    # alignctd_in = E:\Telework\2023-023\Processing\wfilter\2023-023-0056.cnv
    # alignctd_adv = sbeox0V 2.500
    # celltm_date = Oct 30 2023 16:41:26, 7.26.7.129
    # celltm_in = E:\Telework\2023-023\Processing\align\2023-023-0056.cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Oct 30 2023 16:41:49, 7.26.7.129 [derive_vars = 2]
    # Derive_in = E:\Telework\2023-023\Processing\celltm\2023-023-0056.cnv E:\Telewo
    rk\2023-023\Processing\doc\2023-023-ctd.xmlcon
    # derive_time_window_docdt = seconds: 1
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDED was used to remove a few records corrupted by shed wakes near the
     top of the cast.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Oxygen:Dissolved, Conductivity and Fluorescence:URU:Wetlabs data are nominal and
    unedited except that some records were removed in editing temperature and salinity.

    CTD salinity values were within +/-0.005 for all bottle samples taken from near
    the bottom of casts. No recalibration was applied.

    Extracted chlorophyll samples were available from the surface. The ratio of CTD
    Fluorescence to Extracted CHL samples was lower than usually seen, but followed the
    pattern of ratio FL/CHL gradually dropping as extracted chlorophyll values rose.

    Oxygen:Dissolved:SBE values cannot be confirmed as there was no calibration sampling
    for dissolved oxygen. Surface saturation values were between 65% and 118% with all
    values <100% coming from the Gulf Islands area (including cast #49).

    For details on the processing see document: 2023-023_Processing_Report.doc.
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7--- --8-- ----9---- -10-
!Pressu Depth  Temperat Fluores Salinity  PAR   Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0          :      n:    ity:      er_o
!              Primary  URU:                    Dissol Disso Primary   ~bin
!                       Wetlabs                 ved:   lved:           _rec
!                                               SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ------ ----- --------- ----
*END OF HEADER
    2.0    2.0  13.4409   3.514  29.5906  709.4   5.16 225.2   3.56004   29
    3.0    3.1  12.9915   4.307  29.6769  356.5   4.86 212.3   3.53167   16
    4.0    4.0  12.8542   4.237  29.7120  204.9   4.91 214.5   3.52394   23
    5.0    5.0  12.8336   4.234  29.7179  134.3   4.84 211.5   3.52288   23
    6.0    5.9  12.7768   4.049  29.7351   87.6   4.83 211.0   3.51999   22
    7.0    6.9  12.6425   3.986  29.7677   51.4   4.70 205.4   3.51223   19
    8.0    7.9  12.5432   3.490  29.7949   31.2   4.66 203.5   3.50683   21
    9.0    8.9  12.5106   3.400  29.8052   20.2   4.65 203.0   3.50522   20
   10.0    9.9  12.4895   3.421  29.8124   13.8   4.66 203.4   3.50425   19
   11.0   10.9  12.4647   3.565  29.8205    9.8   4.61 201.4   3.50307   18
   12.0   11.9  12.3837   3.223  29.8506    7.1   4.56 199.2   3.49950   18
   13.0   12.9  12.3031   2.820  29.8800    5.2   4.46 194.8   3.49587   19
   14.0   13.9  12.1902   2.667  29.9180    3.9   4.37 191.0   3.49043   19
   15.0   14.9  12.0985   2.458  29.9426    2.8   4.27 186.4   3.48535   19
   16.0   15.8  11.9882   2.402  29.9702    2.2   4.24 185.3   3.47901   18
   17.0   16.9  11.9584   2.312  29.9761    1.7   4.27 186.5   3.47716   19
   18.0   17.9  11.9392   2.181  29.9810    1.3   4.30 187.7   3.47611   19
   19.0   18.8  11.9288   2.228  29.9863    1.0   4.27 186.4   3.47582   19
   20.0   19.8  11.8497   2.112  30.0303    0.8   4.21 184.1   3.47381   18
   21.0   20.8  11.7563   1.861  30.0750    0.6   4.15 181.0   3.47065   19
   22.0   21.8  11.7147   1.652  30.0910    0.5   4.14 181.0   3.46885   19
   23.0   22.8  11.6888   1.615  30.1011    0.4   4.15 181.2   3.46776   18
   24.0   23.8  11.6461   1.371  30.1196    0.3   4.14 180.6   3.46613   19
   25.0   24.8  11.6407   1.290  30.1342    0.2   4.16 181.5   3.46722   19
   26.0   25.8  11.6632   1.588  30.1427    0.2   4.16 181.5   3.47005   18
   27.0   26.8  11.6684   1.634  30.1439    0.2   4.13 180.2   3.47066   19
   28.0   27.8  11.6619   1.665  30.1501    0.2   4.08 178.1   3.47078   18
   29.0   28.7  11.5978   1.561  30.1733    0.1   4.04 176.6   3.46784   19
   30.0   29.7  11.5481   1.310  30.1822    0.1   4.04 176.4   3.46461   20
   31.0   30.8  11.5325   1.439  30.1990    0.1   4.01 175.2   3.46507   18
   32.0   31.8  11.4950   1.190  30.2040    0.1   4.01 175.0   3.46248   19
   33.0   32.7  11.4404   1.927  30.2234    0.1   3.91 170.6   3.45991   19
   34.0   33.7  11.3111   0.795  30.2868    0.1   3.86 168.6   3.45558   19
   35.0   34.7  11.2583   0.887  30.3182    0.1   3.86 168.3   3.45440   19
   36.0   35.7  11.2162   0.840  30.3438    0.1   3.82 166.7   3.45351   19
   37.0   36.7  11.1218   0.650  30.3911    0.1   3.71 161.9   3.45043   19
   38.0   37.7  11.0530   0.479  30.4190    0.1   3.71 162.0   3.44751   19
   39.0   38.6  10.9812   0.394  30.4469    0.1   3.70 161.6   3.44432   19
   40.0   39.6  10.9389   0.282  30.4757    0.1   3.67 160.1   3.44374   19
   41.0   40.7  10.9066   0.284  30.4917    0.1   3.64 158.7   3.44268   20
   42.0   41.7  10.8614   0.252  30.5107    0.1   3.69 160.9   3.44082   19
   43.0   42.6  10.8394   0.218  30.5164    0.1   3.68 160.6   3.43958   19
   44.0   43.6  10.8277   0.229  30.5201    0.1   3.62 157.9   3.43901   19
   45.0   44.6  10.7850   0.247  30.5451    0.1   3.60 157.3   3.43797   19
   46.0   45.6  10.7423   0.236  30.5761    0.1   3.61 157.5   3.43755   19
   47.0   46.6  10.7255   0.224  30.6044    0.1   3.58 156.3   3.43903   19
   48.0   47.6  10.7312   0.241  30.6197    0.1   3.63 158.3   3.44111   19
   49.0   48.6  10.7517   0.232  30.6467    0.1   3.62 157.9   3.44562   20
   50.0   49.6  10.7315   0.236  30.6752    0.1   3.52 153.6   3.44684   19
   51.0   50.5  10.6638   0.211  30.7229    0.1   3.50 152.7   3.44595   31