*2023/11/06 13:52:05.02
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2023/07/23 17:34:27.999
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 50
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 61BEFF98
    NUMBER OF CHANNELS  : 10

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         2              51
       2 Depth                      metres          1.883          50.198
       3 Temperature:Primary        'deg C (ITS90)' 11.1386        17.405
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.321          4.294
       5 Salinity:T0:C0             PSS-78          27.9075        29.3097
       6 PAR                        uE/m^2/sec      0.122          246.576
       7 Oxygen:Dissolved:SBE       mL/L            3.735          6.502
       8 Oxygen:Dissolved:SBE       umol/kg         163.1652       284.6889
       9 Conductivity:Primary       S/m             3.341393       3.697667
      10 Number_of_bin_records      n/a             5              34
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     1
       7  -99   ' '        7  F       ' '     2
       8  -99   ' '        6  F       ' '     1
       9  -99   ' '       10  F       ' '     5
      10  -99   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        E:\Telework\2023-023\Processing\derive\2023-023-0010.cnv
    $END

*ADMINISTRATION
    MISSION             : 2023-023
    AGENCY              : IOS,Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Plankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : BS-11
    EVENT NUMBER        : 10
    LATITUDE            :  49  28.98200 N  ! (deg min)
    LONGITUDE           : 124  45.93700 W  ! (deg min)
    WATER DEPTH         : 61

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251255

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             6448
        Conductivity                       ' '             6147
        'Pressure:Strain Gauge'            ' '             1255
        PAR/Logarithmic:Satlantic          ' '             2274
        'Oxygen:SBE 43'                    ' '             4378
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-8046
    $END
    $REMARKS
        <SoftwareVersion>1.0.4</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.3    2023/10/30 16:42:05      4995      4995
        CLEAN    5.3    2023/10/30 16:42:27      4978      4978
        ADTIMCH  4.4    2023/10/30 16:42:43      4978      4978
        CLIP     1.4.1  2023/10/30 16:43:19      4978      2239
        SHIFTDAT 3.5    2023/10/30 16:43:57      2239      2239
        DELETE   6.3    2023/10/30 16:44:08      2239       994
        CTDEDIT  5.5.0  2023/10/31 10:39:23       994       925
        BINAVE   4.2.1  2023/11/06 13:21:06       925        50
        REMOVECH 8.2    2023/11/06 13:22:08        50        50
        CHGUNITS 3.2    2023/11/06 13:22:27        50        50
        REORDER  1.3.1  2023/11/06 13:24:02 ?         ?
        HDREDIT2 3.2    2023/11/06 13:52:05 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2023/10/30 16:42:24 20
         Reset #RECS, MIN & MAX values in header.
         Insert Pad Values in Channel: Fluorescence:URU:Wetlabs:ECO-AFL [mg/m^3]
           where channel Fluorescence:URU:Wetlabs:ECO-AFL [mg/m^3] is in the range -100
              116 data records in pad range.
         Set event to last  4 characters of file name
        -The following ADTIMCH parameters were used.
         Add      9.07 hours to times in header file section
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First, Last Records =   2740, end from event list: clip.csv
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary [S/m]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  2.00
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    7
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   8 points) will be deleted.
         Drop rate applies in the range    10.00 to    40.79 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.5.0   2023/10/31 10:39:23
             69 records were deleted in this editing session.
         No data values were changed.
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Bin value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2023/11/06 13:22:08
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary [deg C (ITS90)]
         Salinity    reference channel: Salinity:T0:C0 [PSS-78]
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2023/11/06 13:52:05
         Applied edit header: E:\Telework\2023-023\Processing\doc\2023-023-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F9.4 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  7: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  9: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.5
         Channel 10: Number_of_bin_records [n/a]
           Pad:    ' ' ==> -99
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: PAR [uE/m^2/sec]
           Format: F11.3 ==> F7.1
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 49 28.982 N
      ** Longitude: 124 45.937 W
      ** Station: BS-11
      ** Depth: 61 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0.4</SoftwareVersion>
               <BuildDate>Mar 23 2021 08:54:28</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251255'>
               <DateTime>2023-07-23T08:30:13</DateTime>
               <EventSummary numEvents='42'/>
               <Power>
                  <vBattery>15.5</vBattery>
                  <vExternal>0.4</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>9.8</iExt>
                  <iSys>53.7</iSys>
                  <iCPU>19.5</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>8552448</Bytes>
                  <BytesFree>2007662592</BytesFree>
                  <Samples>118784</Samples>
                  <SamplesFree>27884202</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251255'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0.4</FirmwareVersion>
               <FirmwareDate>Mar 23 2021 08:54:28</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='271365' AssemblyNum='41842E'/>
               <PCBAssembly PCBSerialNum='271367' AssemblyNum='41843D'/>
               <MfgDate>2023-02-02T08:30:30</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-6448</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>04-6147</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>12364712</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>PAR</Type>
                     <SerialNum>PAR-2274</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>DO</Type>
                     <SerialNum>4378</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>CHL</Type>
                     <SerialNum>8046</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251255'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>3000</mincondfreq>
                  <pumpdelay>60</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>0</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251255'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>12364712</SerialNum>
                  <Pcaldate>2023-02-13</Pcaldate>
                  <PA0>1.669452e-01</PA0>
                  <PA1>2.757409e-04</PA1>
                  <PA2>-6.637241e-14</PA2>
                  <PTEMPA0>-7.156559e+01</PTEMPA0>
                  <PTEMPA1>4.895334e+01</PTEMPA1>
                  <PTEMPA2>-7.272807e-02</PTEMPA2>
                  <PTCA0>8.388920e+06</PTCA0>
                  <PTCA1>5.351747e+01</PTCA1>
                  <PTCA2>-1.188608e+00</PTCA2>
                  <PTCB0>2.512468e+01</PTCB0>
                  <PTCB1>-7.500000e-05</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>1.450000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251255'>
               <EventSummary numEvents='42'/>
               <Event type='Power On Reset' count='42'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2023-07-23T08:30:16</startTime>
            <Data>
    # nquan = 12
    # nvalues = 4995
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = par/sat/log: PAR/Logarithmic, Satlantic [umol photons/m^2/sec]
    # name 8 = dz/dtM: Descent Rate [m/s]
    # name 9 = sal00: Salinity, Practical [PSU]
    # name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 1
    # name 11 = flag: flag
    # span 0 =          1,       4995
    # span 1 =      0.370,     50.792
    # span 2 =      0.366,     50.355
    # span 3 =    -8.4108,    20.8536
    # span 4 =   0.013105,   3.821932
    # span 5 =    -0.1430,    20.6270
    # span 6 =     1.8662,     3.1611
    # span 7 = 8.5578e-02, 6.8611e+02
    # span 8 =     -1.126,      0.927
    # span 9 =     0.1508,    30.5236
    # span 10 =  -106.6018,    12.5253
    # span 11 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Jul 23 2023 08:30:16 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>6448</SerialNumber>
    #       <CalibrationDate>04-Feb-23</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.33293641e-003</G>
    #       <H>6.39082893e-004</H>
    #       <I>2.20950583e-005</I>
    #       <J>2.06770154e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>6147</SerialNumber>
    #       <CalibrationDate>18-Jan-23</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01031449e+001</G>
    #         <H>1.39347559e+000</H>
    #         <I>-1.63382489e-003</I>
    #         <J>1.84236483e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1255</SerialNumber>
    #       <CalibrationDate>13-Feb-23</CalibrationDate>
    #       <PA0>1.66945152e-001</PA0>
    #       <PA1>2.75740921e-004</PA1>
    #       <PA2>-6.63724103e-014</PA2>
    #       <PTEMPA0>-7.15655855e+001</PTEMPA0>
    #       <PTEMPA1>4.89533360e+001</PTEMPA1>
    #       <PTEMPA2>-7.27280730e-002</PTEMPA2>
    #       <PTCA0>8.38892017e+006</PTCA0>
    #       <PTCA1>5.35174656e+001</PTCA1>
    #       <PTCA2>-1.18860817e+000</PTCA2>
    #       <PTCB0>2.51246775e+001</PTCB0>
    #       <PTCB1>-7.50000000e-005</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, PAR/Logarithmic, Satlantic -->
    #     <PARLog_SatlanticSensor SensorID="76" >
    #       <SerialNumber>2274</SerialNumber>
    #       <CalibrationDate>01/25/23</CalibrationDate>
    #       <a0>9.7164e-001</a0>
    #       <a1>8.0889e-001</a1>
    #       <Im>1.3589e+000</Im>
    #       <ConversionUnits>1</ConversionUnits>
    #       <Multiplier>1.0000e+000</Multiplier>
    #     </PARLog_SatlanticSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Unknown 1, Free -->
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>4378</SerialNumber>
    #       <CalibrationDate>28-Mar-23</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.6069e-001</Soc>
    #         <offset>-0.5173</offset>
    #         <A>-3.4533e-003</A>
    #         <B> 1.1469e-004</B>
    #         <C>-1.9161e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-8046</SerialNumber>
    #       <CalibrationDate>21-Apr-2023</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0110</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 30 2023 12:02:38, 7.26.7.129 [datcnv_vars = 9]
    # datcnv_in = E:\Telework\2023-023\Unprocessed\CTD Data\2023-023-0010.xml E:\Tel
    ework\2023-023\Processing\doc\2023-023-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Oct 30 2023 16:35:55, 7.26.7.129
    # wildedit_in = E:\Telework\2023-023\Processing\convert\2023-023-0010.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # wfilter_date = Oct 30 2023 16:37:05, 7.26.7.129
    # wfilter_in = E:\Telework\2023-023\Processing\wildedit\2023-023-0010.cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action t090C = cosine, 16
    # wfilter_action c0S/m = cosine, 16
    # alignctd_date = Oct 30 2023 16:40:36, 7.26.7.129
    # alignctd_in = E:\Telework\2023-023\Processing\wfilter\2023-023-0010.cnv
    # alignctd_adv = sbeox0V 2.500
    # celltm_date = Oct 30 2023 16:41:19, 7.26.7.129
    # celltm_in = E:\Telework\2023-023\Processing\align\2023-023-0010.cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Oct 30 2023 16:41:38, 7.26.7.129 [derive_vars = 2]
    # Derive_in = E:\Telework\2023-023\Processing\celltm\2023-023-0010.cnv E:\Telewo
    rk\2023-023\Processing\doc\2023-023-ctd.xmlcon
    # derive_time_window_docdt = seconds: 1
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove records corrupted by shed wakes near the
     bottom of the cast.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Oxygen:Dissolved, Conductivity and Fluorescence:URU:Wetlabs data are nominal and
    unedited except that some records were removed in editing temperature and salinity.

    CTD salinity values were within +/-0.005 for all bottle samples taken from near
    the bottom of casts. No recalibration was applied.

    Extracted chlorophyll samples were available from the surface. The ratio of CTD
    Fluorescence to Extracted CHL samples was lower than usually seen, but followed the
    pattern of ratio FL/CHL gradually dropping as extracted chlorophyll values rose.

    Oxygen:Dissolved:SBE values cannot be confirmed as there was no calibration sampling
    for dissolved oxygen. Surface saturation values were between 65% and 118% with all
    values <100% coming from the Gulf Islands area (including cast #49).

    For details on the processing see document: 2023-023_Processing_Report.doc.
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7--- --8-- ----9---- -10-
!Pressu Depth  Temperat Fluores Salinity  PAR   Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0          :      n:    ity:      er_o
!              Primary  URU:                    Dissol Disso Primary   ~bin
!                       Wetlabs                 ved:   lved:           _rec
!                                               SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ------ ----- --------- ----
*END OF HEADER
    2.0    1.9  17.4050   3.747  27.9075  246.6   6.50 284.7   3.69767   34
    3.0    3.0  17.0488   4.294  27.9805  154.1   6.24 273.1   3.67718   21
    4.0    3.9  16.8733   4.267  28.0004   99.7   6.19 270.8   3.66518   19
    5.0    5.0  16.7627   3.703  28.0185   66.6   5.94 259.9   3.65827   18
    6.0    5.9  16.3966   3.646  28.1044   46.0   5.81 254.5   3.63836   17
    7.0    6.9  15.9944   3.473  28.1984   33.2   5.63 246.6   3.61633   18
    8.0    7.9  15.5217   2.832  28.3049   24.5   5.58 244.1   3.58986   18
    9.0    8.9  15.2491   2.562  28.3649   18.6   5.49 240.1   3.57439   18
   10.0    9.9  14.8938   2.428  28.4410   14.3   5.29 231.6   3.55390   18
   11.0   10.9  14.3556   2.232  28.5665   11.3   5.31 232.2   3.52386   18
   12.0   11.9  14.1997   1.994  28.6011    9.2   5.44 237.9   3.51496   18
   13.0   12.9  14.1195   1.786  28.6230    7.6   5.57 243.4   3.51085   18
   14.0   13.9  14.0385   1.636  28.6457    6.2   5.54 242.3   3.50676   18
   15.0   14.9  13.9461   1.573  28.6711    5.1   5.31 232.3   3.50203   19
   16.0   15.9  13.3937   1.396  28.8027    4.2   4.71 206.1   3.47114   18
   17.0   16.9  12.4556   0.912  29.0143    3.5   4.47 195.5   3.41704   18
   18.0   17.8  12.1222   0.670  29.0798    3.0   4.52 197.3   3.39669   18
   19.0   18.8  11.9569   0.613  29.1137    2.6   4.60 201.0   3.38677   18
   20.0   19.8  11.9109   0.544  29.1237    2.2   4.55 198.8   3.38408   19
   21.0   20.8  11.8662   0.566  29.1338    1.9   4.64 202.8   3.38152   18
   22.0   21.8  11.8225   0.560  29.1454    1.7   4.55 199.0   3.37920   18
   23.0   22.8  11.7496   0.523  29.1626    1.4   4.39 192.0   3.37507   17
   24.0   23.8  11.6651   0.485  29.1828    1.2   4.36 190.3   3.37030   19
   25.0   24.8  11.6436   0.470  29.1891    1.1   4.32 188.9   3.36924   18
   26.0   25.8  11.6375   0.477  29.1923    0.9   4.33 189.1   3.36910   18
   27.0   26.8  11.6331   0.508  29.1953    0.8   4.34 189.5   3.36909   18
   28.0   27.7  11.6350   0.451  29.1968    0.7   4.38 191.3   3.36945   18
   29.0   28.7  11.6298   0.484  29.1993    0.6   4.33 189.1   3.36932   18
   30.0   29.7  11.5910   0.449  29.2089    0.5   4.25 185.9   3.36719   19
   31.0   30.7  11.5254   0.475  29.2259    0.4   4.23 184.7   3.36362   18
   32.0   31.7  11.5003   0.446  29.2314    0.4   4.16 181.6   3.36217   18
   33.0   32.7  11.4482   0.438  29.2380    0.3   4.03 176.2   3.35863   18
   34.0   33.7  11.4199   0.414  29.2389    0.3   4.01 175.3   3.35645   18
   35.0   34.7  11.4097   0.410  29.2396    0.2   4.06 177.4   3.35573   18
   36.0   35.7  11.3962   0.388  29.2452    0.2   4.01 175.0   3.35524   18
   37.0   36.7  11.3237   0.376  29.2552    0.2   3.77 164.5   3.35038   18
   38.0   37.7  11.2477   0.354  29.2696    0.2   3.80 165.9   3.34569   18
   39.0   38.7  11.2484   0.365  29.2732    0.2   3.96 172.9   3.34616   18
   40.0   39.7  11.2485   0.361  29.2750    0.2   3.92 171.2   3.34639   18
   41.0   40.6  11.2434   0.365  29.2751    0.1   3.91 170.8   3.34602   18
   42.0   41.6  11.2497   0.375  29.2837    0.1   4.10 179.0   3.34747   18
   43.0   42.6  11.2198   0.377  29.2955    0.1   3.96 172.9   3.34628   17
   44.0   43.6  11.1646   0.375  29.2931    0.1   3.73 163.2   3.34155   18
   45.0   44.6  11.1620   0.321  29.2971    0.1   3.94 172.3   3.34179   19
   46.0   45.6  11.1829   0.363  29.3056    0.1   4.03 176.2   3.34442   17
   47.0   46.6  11.1617   0.386  29.3084    0.1   3.96 173.0   3.34301   18
   48.0   47.7  11.1432   0.375  29.3097    0.1   3.92 171.2   3.34166   22
   49.0   48.7  11.1406   0.379  29.3096    0.1   3.89 169.9   3.34149   21
   50.0   49.5  11.1396   0.393  29.3094    0.1   3.92 171.1   3.34142   28
   51.0   50.2  11.1386   0.386  29.3097    0.1   3.91 170.8   3.34139    5