*2023/09/14 16:41:21.28
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2023/06/01 23:48:58.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 52
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 39ED7442
    NUMBER OF CHANNELS  : 6

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Depth                      metres          1.348          51.361
       2 Temperature:Primary        'deg C (ITS90)' 9.1003         17.0453
       3 Fluorescence:URU:Wetlabs   mg/m^3          0.223          3.045
       4 Oxygen:Dissolved:SBE       mL/L            3.886          7.138
       5 Oxygen:Dissolved:SBE       umol/kg         169.6655       312.6602
       6 Number_of_bin_records      n/a             14             67
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        8  F       ' '     3
       4  -99   ' '        7  F       ' '     2
       5  -99   ' '        6  F       ' '     1
       6  -99   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        D:\Telework\2023-022\Processing\derive\2023-022-0011.cnv
    $END

*ADMINISTRATION
    MISSION             : 2023-022
    AGENCY              : IOS,Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Plankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : BS-11
    EVENT NUMBER        : 11
    LATITUDE            :  49  28.95200 N  ! (deg min)
    LONGITUDE           : 124  45.96900 W  ! (deg min)
    WATER DEPTH         : 61

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251255

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             6448
        Conductivity                       ' '             6147
        'Pressure:Strain Gauge'            ' '             1255
        PAR/Logarithmic:Satlantic          ' '             2274
        'Oxygen:SBE 43'                    ' '             4378
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-8046
    $END
    $REMARKS
        <SoftwareVersion>1.0.4</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.3    2023/08/10 14:41:15      3665      3665
        CLEAN    5.3    2023/08/10 14:42:46      3665      3665
        ADTIMCH  4.4    2023/08/10 14:47:59      3665      3665
        CLIP     1.4.1  2023/08/10 15:15:53      3665      1896
        DELETE   6.3    2023/08/10 15:22:54      1896       934
        BINAVE   4.2.1  2023/08/11 11:36:22       934        52
        CHGUNITS 3.2    2023/09/14 16:15:06        52        52
        REORDER  1.3.1  2023/09/14 16:24:18 ?         ?
        REMOVECH 8.2    2023/09/14 16:24:32        52        52
        HDREDIT2 3.2    2023/09/14 16:41:21 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2023/08/10 14:42:44 20
         Reset #RECS, MIN & MAX values in header.
         Set event to last  4 characters of file name
        -The following ADTIMCH parameters were used.
         Add      9.00 hours to times in header file section
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First, Last Records =   1770, end from event list: clip.csv
         Time Not Available in File
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    41.83 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -CHANGE units:
         Temperature reference channel: Temperature:Primary [deg C (ITS90)]
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE' changed from mL/L    to umol/kg
        -REMOVECH 2023/09/14 16:24:32
         The following CHANNEL(S) were removed:
          Conductivity:Primary [S/m]
          Salinity:T0:C0 [PSS-78]
        -HEADER EDITS: 2023/09/14 16:41:21
         Applied edit header: D:\Telework\2023-022\Processing\doc\2023-022-HDR.TXT
         Channel  1: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
         Channel  3: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  4: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  6: Number_of_bin_records [n/a]
           Pad:    ' ' ==> -99
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 49 28.952 N
      ** Longitude: 124 45.969 W
      ** Station: BS-11
      ** Depth: 61 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0.4</SoftwareVersion>
               <BuildDate>Mar 23 2021 08:54:28</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251255'>
               <DateTime>2023-06-01T14:48:55</DateTime>
               <EventSummary numEvents='23'/>
               <Power>
                  <vBattery>15.9</vBattery>
                  <vExternal>0.4</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.2</vRTC>
                  <iExt>7.3</iExt>
                  <iSys>51.3</iSys>
                  <iCPU>18.6</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>589824</Bytes>
                  <BytesFree>2015625216</BytesFree>
                  <Samples>8192</Samples>
                  <SamplesFree>27994794</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251255'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0.4</FirmwareVersion>
               <FirmwareDate>Mar 23 2021 08:54:28</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='271365' AssemblyNum='41842E'/>
               <PCBAssembly PCBSerialNum='271367' AssemblyNum='41843D'/>
               <MfgDate>2023-02-02T08:30:30</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-6448</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>04-6147</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>12364712</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>PAR</Type>
                     <SerialNum>PAR-2274</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>DO</Type>
                     <SerialNum>4378</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>CHL</Type>
                     <SerialNum>8046</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251255'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>9600</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>3000</mincondfreq>
                  <pumpdelay>60</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>0</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251255'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>12364712</SerialNum>
                  <Pcaldate>2023-02-13</Pcaldate>
                  <PA0>1.669452e-01</PA0>
                  <PA1>2.757409e-04</PA1>
                  <PA2>-6.637241e-14</PA2>
                  <PTEMPA0>-7.156559e+01</PTEMPA0>
                  <PTEMPA1>4.895334e+01</PTEMPA1>
                  <PTEMPA2>-7.272807e-02</PTEMPA2>
                  <PTCA0>8.388920e+06</PTCA0>
                  <PTCA1>5.351747e+01</PTCA1>
                  <PTCA2>-1.188608e+00</PTCA2>
                  <PTCB0>2.512468e+01</PTCB0>
                  <PTCB1>-7.500000e-05</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>1.450000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251255'>
               <EventSummary numEvents='23'/>
               <Event type='Power On Reset' count='23'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2023-06-01T14:48:58</startTime>
            <Data>
    # nquan = 11
    # nvalues = 3665
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 1
    # name 10 = flag: flag
    # span 0 =          1,       3665
    # span 1 =      0.414,     51.832
    # span 2 =      0.398,     51.474
    # span 3 =   -11.2252,    18.1059
    # span 4 =   0.000603,   3.609313
    # span 5 =    -0.1430,    19.3267
    # span 6 =     1.8271,     3.2822
    # span 7 =     -1.156,      1.160
    # span 8 =    -0.0055,    30.1163
    # span 9 =  -111.9712,    12.7760
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Jun 01 2023 14:48:58 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>6448</SerialNumber>
    #       <CalibrationDate>04-Feb-23</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.33293641e-003</G>
    #       <H>6.39082893e-004</H>
    #       <I>2.20950583e-005</I>
    #       <J>2.06770154e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>6147</SerialNumber>
    #       <CalibrationDate>18-Jan-23</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01031449e+001</G>
    #         <H>1.39347559e+000</H>
    #         <I>-1.63382489e-003</I>
    #         <J>1.84236483e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1255</SerialNumber>
    #       <CalibrationDate>13-Feb-23</CalibrationDate>
    #       <PA0>1.66945152e-001</PA0>
    #       <PA1>2.75740921e-004</PA1>
    #       <PA2>-6.63724103e-014</PA2>
    #       <PTEMPA0>-7.15655855e+001</PTEMPA0>
    #       <PTEMPA1>4.89533360e+001</PTEMPA1>
    #       <PTEMPA2>-7.27280730e-002</PTEMPA2>
    #       <PTCA0>8.38892017e+006</PTCA0>
    #       <PTCA1>5.35174656e+001</PTCA1>
    #       <PTCA2>-1.18860817e+000</PTCA2>
    #       <PTCB0>2.51246775e+001</PTCB0>
    #       <PTCB1>-7.50000000e-005</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, PAR/Logarithmic, Satlantic -->
    #     <PARLog_SatlanticSensor SensorID="76" >
    #       <SerialNumber>2274</SerialNumber>
    #       <CalibrationDate>01/25/23</CalibrationDate>
    #       <a0>9.7164e-001</a0>
    #       <a1>8.0889e-001</a1>
    #       <Im>1.3589e+000</Im>
    #       <ConversionUnits>1</ConversionUnits>
    #       <Multiplier>1.0000e+000</Multiplier>
    #     </PARLog_SatlanticSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Unknown 1, Free -->
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>4378</SerialNumber>
    #       <CalibrationDate>28-Mar-23</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.6069e-001</Soc>
    #         <offset>-0.5173</offset>
    #         <A>-3.4533e-003</A>
    #         <B> 1.1469e-004</B>
    #         <C>-1.9161e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-8046</SerialNumber>
    #       <CalibrationDate>21-Apr-2023</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0110</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Jun 02 2023 07:52:15, 7.26.7.129 [datcnv_vars = 8]
    # datcnv_in = D:\Telework\2023-022\2023-022-0011.xml D:\Telework\2023-022\Proces
    sing\convert\2023-022-ctd_1255.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # filter_date = Jul 20 2023 11:50:11, 7.26.7.129
    # filter_in = D:\Telework\2023-022\Processing\convert\2023-022-0011.cnv
    # filter_low_pass_tc_A = 1.000
    # filter_low_pass_tc_B = 0.500
    # filter_low_pass_A_vars = prdM
    # filter_low_pass_B_vars =
    # wfilter_date = Jul 20 2023 11:51:27, 7.26.7.129
    # wfilter_in = D:\Telework\2023-022\Processing\wildedit\2023-022-0011.cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action t090C = cosine, 8
    # wfilter_action c0S/m = cosine, 8
    # alignctd_date = Jul 20 2023 11:52:18, 7.26.7.129
    # alignctd_in = D:\Telework\2023-022\Processing\wfilter\2023-022-0011.cnv
    # alignctd_adv = sbeox0V 2.500
    # celltm_date = Jul 20 2023 11:52:58, 7.26.7.129
    # celltm_in = D:\Telework\2023-022\Processing\align\2023-022-0011.cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Jul 20 2023 11:55:02, 7.26.7.129 [derive_vars = 2]
    # Derive_in = D:\Telework\2023-022\Processing\celltm\2023-022-0011.cnv D:\Telewo
    rk\2023-022\Processing\doc\25P -1255 May 2023.xmlcon
    # derive_time_window_docdt = seconds: 1
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Oxygen:Dissolved, Fluorescence:URU:Wetlabs and PAR data are nominal and unedited
    except that some records were removed at the bottom of many casts.

    CTD conductivity and salinity data were bad and were removed from all files.

    Extracted chlorophyll samples were available. The comparison of fluorescence values
    with chlorophyll looked normal, though fluorescence was much higher in deep water
    where 2 chlorophyll samples were near zero.

    Oxygen:Dissolved:SBE values cannot be confirmed as there was no calibration sampling
    for dissolved oxygen. Surface saturation values looked reasonable, but this is a
    region subject to great variability.

    After cast #31 dissolved oxygen data look bad below the surface with spikes and odd
    offset sections. Oxygen:Dissolved:SBE data were removed from CTD casts 32 to 48.

    For details on the processing see document: 2023-022_Processing_Report.doc.
!--1--- ---2---- ---3--- --4--- --5-- -6--
!Depth  Temperat Fluores Oxygen Oxyge Numb
!       ure:     cence:  :      n:    er_o
!       Primary  URU:    Dissol Disso ~bin
!                Wetlabs ved:   lved: _rec
!                        SBE    SBE   ords
!------ -------- ------- ------ ----- ----
*END OF HEADER
    1.3  17.0453   1.164   6.98 305.8   48
    1.6  16.9854   1.115   6.99 306.3   41
    2.7  16.8475   1.380   6.96 304.9   20
    3.8  16.6230   1.688   7.14 312.7   15
    4.9  16.5881   1.916   6.96 305.0   15
    5.9  16.5025   1.977   6.90 302.2   14
    6.9  16.3848   2.193   6.47 283.6   14
    7.9  16.3029   1.765   6.03 263.9   14
    8.9  14.8578   1.506   6.35 278.1   14
    9.9  13.6753   2.695   6.51 284.8   14
   10.9  13.6300   2.765   6.25 273.3   14
   11.9  13.0093   3.025   5.90 258.0   14
   12.9  12.1165   3.045   5.67 247.7   15
   13.9  11.8877   2.376   5.59 244.3   15
   14.9  11.7002   2.324   5.44 237.7   15
   15.9  11.3107   1.886   5.44 237.7   16
   16.8  11.1859   1.443   5.47 239.0   15
   17.8  11.0989   1.292   5.48 239.3   16
   18.8  11.0109   1.385   5.41 236.2   15
   19.8  10.8233   1.328   5.28 230.6   16
   20.8  10.5931   1.236   5.21 227.6   16
   21.8  10.5146   1.034   5.14 224.6   16
   22.8  10.3658   0.875   5.14 224.6   16
   23.8  10.2504   0.789   5.17 225.9   15
   24.8  10.2472   0.726   5.20 227.2   16
   25.8  10.2440   0.900   5.23 228.5   16
   26.8  10.2316   0.720   5.22 227.9   16
   27.8  10.2118   0.638   5.22 227.9   15
   28.7  10.1817   0.592   5.25 229.1   16
   29.7  10.1538   0.657   5.24 229.0   16
   30.7  10.0915   0.547   5.14 224.3   16
   31.7  10.0238   0.434   5.05 220.6   16
   32.7   9.9799   0.444   5.04 220.0   16
   33.7   9.8382   0.438   4.97 216.9   16
   34.7   9.7578   0.270   4.89 213.5   16
   35.7   9.7169   0.454   4.75 207.2   16
   36.7   9.6869   0.393   4.69 204.6   16
   37.7   9.6173   0.400   4.59 200.6   16
   38.7   9.5544   0.306   4.56 199.2   16
   39.7   9.5357   0.324   4.58 199.8   16
   40.7   9.4980   0.329   4.61 201.3   16
   41.7   9.4837   0.294   4.57 199.4   16
   42.6   9.4324   0.289   4.52 197.4   16
   43.6   9.4246   0.297   4.48 195.7   16
   44.6   9.3904   0.319   4.46 194.6   16
   45.6   9.3285   0.254   4.29 187.4   16
   46.6   9.2359   0.287   4.21 184.0   16
   47.6   9.2053   0.226   4.23 184.6   16
   48.6   9.1901   0.308   4.22 184.3   16
   49.7   9.1684   0.307   4.09 178.5   18
   51.0   9.1119   0.233   3.89 169.7   27
   51.4   9.1003   0.223   3.94 171.9   67