*2023/05/05 11:53:28.17
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2022/09/19 18:57:54.000
    TIME INCREMENT      : 0 0 0 0.25 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 26
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : A1B6F16C
    NUMBER OF CHANNELS  : 6

    $TABLE: CHANNELS
    ! No Name                    Units           Minimum        Maximum
    !--- ----------------------- --------------- -------------- --------------
       1 Pressure                decibar         1.1375         25.87167
       2 Depth                   metres          1.128          25.65067
       3 Temperature             'deg C (ITS90)' 11.7013        15.9242
       4 Conductivity:Primary    S/m             3.38863        3.6604
       5 Salinity:T0:C0          PSS-78          28.6173        29.39327
       6 Number_of_bin_records   n/a             2              4
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '       10  F       ' '     6
       5  -99   ' '        9  F       ' '     4
       6  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        D:\Telework\2022-078\Processing\derive\2022-078-0015.cnv
    $END

*ADMINISTRATION
    MISSION             : 2021-078
    AGENCY              : OSD, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Juvenile Herring Survey
    SCIENTIST           : Thompson M.
    PLATFORM            : Walker Rock

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : 39-1
    EVENT NUMBER        : 15
    LATITUDE            :  48  39.52990 N  ! (deg min)
    LONGITUDE           : 123  27.97640 W  ! (deg min)
    WATER DEPTH         : 26
    TRANSECT NAME       : Saanich Inlet                         ! custom item

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-19plus
    SERIAL NUMBER       : 8118

    $TABLE: SENSORS
    !   Name                     Abs Depth       Serial No
    !   -----------------------  --------------  ----------
        Temperature              ' '             8118
        Conductivity             ' '             8118
        'Pressure:Strain Gauge'  ' '             8118
    $END
    $REMARKS
        Software version 2.8.0.119
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.3    2023/05/04 15:46:21       475       475
        CLEAN    5.3    2023/05/04 15:48:50       475       475
        MERGEHDR 1.3    2023/05/05 08:27:02       475       475
        CLIP     1.4.1  2023/05/05 09:17:39       475       337
        SHIFTDAT 3.5    2023/05/05 10:37:52       337       337
        DELETE   6.3    2023/05/05 10:38:04       337        68
        CTDEDIT  5.4.0  2023/05/05 11:09:52        68        68
        BINAVE   4.2.1  2023/05/05 11:29:12        68        26
        REMOVECH 8.2    2023/05/05 11:48:38        26        26
        HDREDIT2 3.2    2023/05/05 11:53:28 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2023/05/04 15:48:49 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure [decibar]
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First, Last Records =    139, end from event list: clip.csv
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -2.00
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    15.99 dbars
         Sample interval (from FILE section of header) =     0.250 seconds.
        -CTDEDIT  v5.4.0   2023/05/05 11:09:52
              4 changes in channel Salinity:T0:C0
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Bin value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2023/05/05 11:48:38
         The following CHANNEL(S) were removed:
          Scan_Number
          Descent_Rate [m/s]
          Flag
        -HEADER EDITS: 2023/05/05 11:53:28
         Applied edit header: D:\Telework\2022-078\Processing\doc\2022-078-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE19plus  Data File:
      FileName = C:\Users\GFUser\Desktop\SeaBird_Data\SOG_Juv_Herring_Survey_2022\Le
    g_3\SBE19plus_01908118_2022_09_26_0015.hex
      Software version 2.8.0.119
      Temperature SN = 8118
      Conductivity SN = 8118
      System UpLoad Time = Sep 26 2022 11:47:07
      <ApplicationData>
      <Seaterm232>
      <SoftwareVersion>2.8.0.119</SoftwareVersion>
      <BuildDate>07-Nov-2018</BuildDate>
      </Seaterm232>
      </ApplicationData>
      <InstrumentState>
      <HardwareData DeviceType='SBE19plus' SerialNumber='01908118'>

         <Manufacturer>Sea-Bird Electronics, Inc.</Manufacturer>

         <FirmwareVersion>3.1.8</FirmwareVersion>

         <FirmwareDate>Mar  9 2016 16:22:29</FirmwareDate>

         <CommandSetVersion>1.4</CommandSetVersion>

         <PCBAssembly PCBSerialNum='237093' AssemblyNum='41054K'/>

         <PCBAssembly PCBSerialNum='237099' AssemblyNum='41059E'/>

         <PCBAssembly PCBSerialNum='231099' AssemblyNum='41606A'/>

         <PCBAssembly PCBSerialNum='237089' AssemblyNum='41967B'/>

         <MfgDate>05 Feb 2021</MfgDate>

         <InternalSensors>

            <Sensor id='Main Temperature'>

               <type>temperature0</type>

               <SerialNumber>01908118</SerialNumber>

            </Sensor>

            <Sensor id='Main Conductivity'>

               <type>conductivity-0</type>

               <SerialNumber>01908118</SerialNumber>

            </Sensor>

            <Sensor id='Main Pressure'>

               <type>strain-0</type>

               <SerialNumber>11840620</SerialNumber>

            </Sensor>

         </InternalSensors>

         <ExternalSensors>

            <Sensor id='volt 0'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 1'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 2'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 3'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 4'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='volt 5'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

            <Sensor id='serial'>

               <type>not assigned</type>

               <SerialNumber>not assigned</SerialNumber>

            </Sensor>

         </ExternalSensors>

      </HardwareData>
      <StatusData DeviceType='SBE19plus' SerialNumber='01908118'>

         <DateTime>2022-09-26T11:41:48</DateTime>

         <LoggingState>not logging</LoggingState>

         <EventSummary numEvents='0'/>

         <Power>

            <vMain>13.8</vMain>

            <vLith>8.4</vLith>

            <iMain>61.5</iMain>

            <iPump>66.7</iPump>

         </Power>

         <MemorySummary>

            <Bytes>246488</Bytes>

            <Samples>22408</Samples>

            <SamplesFree>5959241</SamplesFree>

            <SampleLength>11</SampleLength>

            <Profiles>22</Profiles>

         </MemorySummary>

      </StatusData>
      <ConfigurationData DeviceType='SBE19plus' SerialNumber='01908118'>

         <ProfileMode>

            <ScansToAverage>1</ScansToAverage>

            <MinimumCondFreq>3119</MinimumCondFreq>

            <PumpDelay>60</PumpDelay>

            <AutoRun>no</AutoRun>

            <IgnoreSwitch>no</IgnoreSwitch>

         </ProfileMode>

         <Battery>

            <Type>alkaline</Type>

            <CutOff>7.5</CutOff>

         </Battery>

         <DataChannels>

            <ExtVolt0>no</ExtVolt0>

            <ExtVolt1>no</ExtVolt1>

            <ExtVolt2>no</ExtVolt2>

            <ExtVolt3>no</ExtVolt3>

            <ExtVolt4>no</ExtVolt4>

            <ExtVolt5>no</ExtVolt5>

            <SBE38>no</SBE38>

            <WETLABS>no</WETLABS>

            <OPTODE>no</OPTODE>

            <SBE63>no</SBE63>

            <SeaFET>no</SeaFET>

            <GTD>no</GTD>

         </DataChannels>

         <EchoCharacters>yes</EchoCharacters>

         <OutputExecutedTag>yes</OutputExecutedTag>

         <OutputFormat>raw HEX</OutputFormat>

      </ConfigurationData>
      <CalibrationCoefficients DeviceType='SBE19plus' SerialNumber='01908118'>

         <Calibration format='TEMP1' id='Main Temperature'>

            <SerialNum>01908118</SerialNum>

            <CalDate>18-Feb-21</CalDate>

            <TA0>1.221095e-03</TA0>

            <TA1>2.790824e-04</TA1>

            <TA2>-1.182751e-06</TA2>

            <TA3>1.810933e-07</TA3>

            <TOFFSET>0.000000e+00</TOFFSET>

         </Calibration>

         <Calibration format='WBCOND0' id='Main Conductivity'>

            <SerialNum>01908118</SerialNum>

            <CalDate>18-Feb-21</CalDate>

            <G>-1.013067e+00</G>

            <H>1.483929e-01</H>

            <I>-4.276012e-04</I>

            <J>5.474016e-05</J>

            <CPCOR>-9.570000e-08</CPCOR>

            <CTCOR>3.250000e-06</CTCOR>

            <CSLOPE>1.000000e+00</CSLOPE>

         </Calibration>

         <Calibration format='STRAIN0' id='Main Pressure'>

            <SerialNum>11840620</SerialNum>

            <CalDate>12-Feb-21</CalDate>

            <PA0>-7.563550e-01</PA0>

            <PA1>2.623637e-03</PA1>

            <PA2>2.150539e-11</PA2>

            <PTCA0>5.244400e+05</PTCA0>

            <PTCA1>-1.695409e+01</PTCA1>

            <PTCA2>1.923290e-01</PTCA2>

            <PTCB0>2.526912e+01</PTCB0>

            <PTCB1>8.250000e-04</PTCB1>

            <PTCB2>0.000000e+00</PTCB2>

            <PTEMPA0>-6.536192e+01</PTEMPA0>

            <PTEMPA1>5.166165e+01</PTEMPA1>

            <PTEMPA2>-2.932168e-01</PTEMPA2>

            <POFFSET>0.000000e+00</POFFSET>

            <PRANGE>8.700000e+02</PRANGE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 0'>

            <OFFSET>-4.496400e-02</OFFSET>

            <SLOPE>1.250272e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 1'>

            <OFFSET>-4.571300e-02</OFFSET>

            <SLOPE>1.250106e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 2'>

            <OFFSET>-4.585600e-02</OFFSET>

            <SLOPE>1.251101e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 3'>

            <OFFSET>-4.565400e-02</OFFSET>

            <SLOPE>1.250909e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 4'>

            <OFFSET>-4.569900e-02</OFFSET>

            <SLOPE>1.249737e+00</SLOPE>

         </Calibration>

         <Calibration format='VOLT0' id='Volt 5'>

            <OFFSET>-4.601900e-02</OFFSET>

            <SLOPE>1.251242e+00</SLOPE>

         </Calibration>

         <Calibration format='FREQ0' id='external frequency channel'>

            <EXTFREQSF>1.000020e+00</EXTFREQSF>

         </Calibration>

      </CalibrationCoefficients>
      <EventCounters DeviceType='SBE19plus' SerialNumber='01908118'>

         <EventSummary numEvents='0'/>

      </EventCounters></InstrumentState>
      <Headers>

      cast  15 19 Sep 2022 18:57:54 samples 16121 to 16595, avg = 1, stop = mag swit
    ch

    # nquan = 8
    # nvalues = 475
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = tv290C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = dz/dtM: Descent Rate [m/s]
    # name 6 = sal00: Salinity, Practical [PSU]
    # name 7 = flag: flag
    # span 0 =          1,        475
    # span 1 =     -0.030,     25.990
    # span 2 =     -0.029,     25.768
    # span 3 =    11.6800,    21.3053
    # span 4 =  -0.000026,   3.733194
    # span 5 =     -0.687,      1.678
    # span 6 =     0.0000,    29.5298
    # span 7 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.25
    # start_time = Sep 19 2022 18:57:54 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="3" >
    #   <sensor Channel="1" >
    #     <!-- Count, Temperature -->
    #     <TemperatureSensor SensorID="58" >
    #       <SerialNumber>8118</SerialNumber>
    #       <CalibrationDate>18-Feb-21</CalibrationDate>
    #       <A0>1.22109548e-003</A0>
    #       <A1>2.79082418e-004</A1>
    #       <A2>-1.18275076e-006</A2>
    #       <A3>1.81093277e-007</A3>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 0, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>8118</SerialNumber>
    #       <CalibrationDate>18-Feb-21</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01306667e+000</G>
    #         <H>1.48392906e-001</H>
    #         <I>-4.27601206e-004</I>
    #         <J>5.47401568e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>8118</SerialNumber>
    #       <CalibrationDate>12-Feb-21</CalibrationDate>
    #       <PA0>-7.56355003e-001</PA0>
    #       <PA1>2.62363700e-003</PA1>
    #       <PA2>2.15053930e-011</PA2>
    #       <PTEMPA0>-6.53619227e+001</PTEMPA0>
    #       <PTEMPA1>5.16616510e+001</PTEMPA1>
    #       <PTEMPA2>-2.93216773e-001</PTEMPA2>
    #       <PTCA0>5.24439966e+005</PTCA0>
    #       <PTCA1>-1.69540914e+001</PTCA1>
    #       <PTCA2>1.92328990e-001</PTCA2>
    #       <PTCB0>2.52691250e+001</PTCB0>
    #       <PTCB1>8.25000000e-004</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    # </Sensors>
    # datcnv_date = May 04 2023 14:17:00, 7.26.7.129 [datcnv_vars = 6]
    # datcnv_in = D:\Telework\2022-078\Unprocessed\2022-078-0015.hex D:\Telework\202
    2-078\Processing\doc\2022-078-ctd.xmlcon
    # datcnv_skipover = 0
    # filter_date = May 04 2023 15:28:00, 7.26.7.129
    # filter_in = D:\Telework\2022-078\Processing\convert\2022-078-0015.cnv
    # filter_low_pass_tc_A = 0.500
    # filter_low_pass_tc_B = 0.150
    # filter_low_pass_A_vars = c0S/m
    # filter_low_pass_B_vars =
    # alignctd_date = May 04 2023 15:41:19, 7.26.7.129
    # alignctd_in = D:\Telework\2022-078\Processing\filter\2022-078-0015.cnv
    # alignctd_adv = tv290C 0.500, c0S/m 0.500
    # Derive_date = May 04 2023 15:42:13, 7.26.7.129 [derive_vars = 1]
    # Derive_in = D:\Telework\2022-078\Processing\align\2022-078-0015.cnv D:\Telewor
    k\2022-078\Processing\doc\2022-078-ctd.xmlcon
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to clean salinity lightly.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Station Names contain the transect number followed by the station number for that transect.

    There was no calibration sampling, but the CTD had been calibrated at the
    factory in February 2021, so significant drift is not expected.

    For details on the processing see document: 2022-078_Processing_Report.doc.
!--1--- --2--- ---3---- ----4---- ---5---- -6--
!Pressu Depth  Temperat Conductiv Salinity Numb
!re            ure      ity:      :T0:C0   er_o
!                       Primary            ~bin
!                                          _rec
!                                          ords
!------ ------ -------- --------- -------- ----
*END OF HEADER
    1.0    1.1  15.9242  3.660400  28.6173    2
    2.0    1.9  15.8295  3.656229  28.6434    2
    3.0    2.9  15.4619  3.627132  28.6696    3
    4.0    4.0  14.9713  3.590235  28.7088    2
    5.0    5.0  14.6353  3.559922  28.6941    3
    6.0    6.0  14.1432  3.525379  28.7392    2
    7.0    6.9  13.7066  3.496458  28.8023    2
    8.0    7.9  13.4349  3.474659  28.8067    3
    9.0    8.9  13.2873  3.463113  28.8114    2
   10.0   10.0  13.2105  3.457054  28.8132    3
   11.0   11.0  13.1465  3.452902  28.8230    2
   12.0   11.8  13.1146  3.450776  28.8271    2
   13.0   12.8  13.0075  3.446139  28.8651    3
   14.0   13.9  12.9001  3.437958  28.8704    2
   15.0   14.9  12.6464  3.423445  28.9285    3
   16.0   15.9  12.4446  3.409544  28.9526    2
   17.0   16.8  12.3415  3.402071  28.9612    3
   18.0   17.8  12.2539  3.397083  28.9814    2
   19.0   18.7  12.1919  3.394504  29.0047    3
   20.0   19.9  12.1304  3.393790  29.0452    3
   21.0   20.9  12.1021  3.395321  29.0813    4
   22.0   21.7  11.9584  3.393469  29.1754    3
   23.0   22.8  11.8438  3.389893  29.2305    3
   24.0   23.9  11.7847  3.388630  29.2645    3
   25.0   24.9  11.7202  3.389883  29.3269    3
   26.0   25.7  11.7013  3.395278  29.3933    3