*2022/01/28 15:24:05.33
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2021/08/22 14:32:14.000
    TIME INCREMENT      : 0 0 0 0.25 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 4
    DATA DESCRIPTION    : Bottle:Rosette:Up:Stop + CTD:Up
    FILE TYPE           : ASCII
    CRC                 : B7411FD4
    NUMBER OF CHANNELS  : 15

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Bottle:Firing_Sequence      n/a             1              4
       2 Bottle_Number               n/a             1              4
       3 Pressure                    decibar         4.6            35.9
       4 Depth                       metres          4.5            35.5
       5 Temperature                 'deg C (ITS90)' 0.944          6.0139
       6 Fluorescence:URU:Seapoint   mg/m^3          0.323          0.762
       7 Turbidity:Seapoint          FTU             0.6            0.9
       8 Salinity:T0:C0              PSS-78          27.2516        30.5012
       9 Oxygen:Dissolved:SBE        mL/L            7.8            9.09
      10 Oxygen:Dissolved:SBE        umol/kg         341.1          396.3
      11 Conductivity:Primary        S/m             2.6366         2.741743
      12 Sample_Number               n/a             135            138
      13 Number_of_bin_records       n/a             41             41
      14 Salinity:Bottle             PSS-78          27.5078        30.2502
      15 Flag:Salinity:Bottle        ' '
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        3  I       I       0
       2  -99   ' '        3  I       I       0
       3  -99   ' '        7  F       ' '     1
       4  -99   ' '        7  F       ' '     1
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        8  F       ' '     3
       7  -99   ' '        7  F       ' '     1
       8  -99   ' '        9  F       ' '     4
       9  -99   ' '        7  F       ' '     2
      10  -99   ' '        6  F       ' '     1
      11  -99   ' '       10  F       ' '     6
      12  -99   ' '        5  I       I       0
      13  ' '   ' '        5  I       I       0
      14  -99   ' '        9  F       R4      4
      15  0     ' '        3  NQ      C     ' '
    $END
    $REMARKS
        Quality flags have the following significance:
        ----------------------------------------------------------------------------------
        0 = Acceptable measurement with no header comment
        1 = Sample for this measurement was collected but not analyzed. Sample lost.
        2 = Acceptable measurement with header comment
        3 = Questionable measurement (Probably Good)
        4 = Poor measurement (Probably Bad)
        5 = Measurement not reported (Bad)
        6 = Mean of replicate measurements
        7 = Manual chromatographic peak measurement
        8 = Irregular digital chromatographic peak integration
        9 = Sample was planned for this measurement from this bottle but was not collected
        ----------------------------------------------------------------------------------
    $END

*ADMINISTRATION
    MISSION             : 2021-038
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : CBS-MEA
    SCIENTIST           : Eert J.
    PLATFORM            : Frosti

*LOCATION
    GEOGRAPHIC AREA     : Beaufort Sea
    STATION             : CPY_01
    EVENT NUMBER        : 209
    LATITUDE            :  70  13.43180 N  ! (deg min)
    LONGITUDE           : 124  29.99510 W  ! (deg min)
    ALTIMETER (M)       : 7.69                                  ! custom item
    $REMARKS
        Altimeter value is distance from bottom and is calculated as the
        median of the deepest 2 metres of data.
    $END

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-19plus
    SERIAL NUMBER       : 6009

    $TABLE: SENSORS
    !   Name                        Abs Depth       Serial No
    !   --------------------------  --------------  ----------
        Temperature                 ' '             6009
        Conductivity                ' '             6009
        'Pressure:Strain Gauge'     ' '             6009
        'Oxygen:SBE 43'             ' '             615
        Altimeter                   ' '             'With 1186 9+'
        Fluorometer:Seapoint        ' '             2745
        'Turbidity Meter:Seapoint'  ' '             11432
    $END
    $REMARKS
        Software version 2.2.0 SB_Terminal.dll
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.3    2022/01/21 13:09:09       164       164
        MERGEHDR 1.3    2022/01/25 17:07:22       164       164
        ADDSAMP  3.6    2022/01/26 14:36:32       164       164
        BINAVE   4.2.1  2022/01/26 14:38:31       164         4
        MERGE    3.6    2022/01/26 14:38:38         4         4
        CLEAN    5.3    2022/01/28 12:02:54         4         4
        SORT     3.6    2022/01/28 12:03:38         4         4
        REMOVECH 8.2    2022/01/28 12:08:50         4         4
        REMOVECH 8.2    2022/01/28 12:52:26         4         4
        REORDER  1.3.1  2022/01/28 12:53:41 ?         ?
        HDREDIT2 3.2    2022/01/28 12:57:34 ?         ?
        CLEAN    5.3    2022/01/28 15:24:05         4         4
    $END
    $REMARKS
        -The following ADDSAMP parameters were used:
         Sample Number Lookup File: D:\Telework\2021-038\SBE19+\Processing\hydro\addsamp.csv
         Bottle Channel Name: Bottle_Number
        -The following BINAVE parameters were used:
         Bin channel = Bottle_Number
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -The following MERGE parameters were used: 2022/01/26 14:38:38
         Merge Channel: Bottle_Number
         Merge Scheme Used: 4: Add Secondary to Matching Primary
         Overlap Scheme Used: Keep Primary
         Primary Channels to Include: ALL
         Secondary Channels to Include:
           Salinity:Bottle,
           Flag:Salinity:Bottle
         Primary file  : D:\Telework\2021-038\SBE19+\Processing\hydro\2021-038-0209.samavg
         Secondary file: D:\Telework\2021-038\SBE19+\Processing\hydro\2021-038-0209.mrgcln1s
         4 secondary records matched to primary records.
        -SORT parameters: 2022/01/26 14:36:11
        Sorted in ascending order of channel Bottle_Number
        -CLEAN functions: 2022/01/28 12:02:53 20
         Reset #RECS, MIN & MAX values in header.
         Change character data from " " to "0" in channels Flag:*
         Set event to last  4 characters of file name
         Remove remark heading: "Comments from secondary"
        -SORT parameters: 2022/01/28 12:03:38
         Sorted in ascending order of channel Pressure
        -REMOVECH 2022/01/28 12:08:50
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Altimeter [metres]
          Descent_Rate [m/s]
          Flag
        -REMOVECH 2022/01/28 12:52:26
         The following CHANNEL(S) were removed:
          Oxygen:Voltage:SBE [volts]
          Speed:Sound [m/s]
        -HEADER EDITS: 2022/01/28 12:57:34
         Applied edit header: D:\Telework\2021-038\SBE19+\Processing\doc\HYDRO\2021-038-bot-hdr.txt
         Channel  1: Bottle:Firing_Sequence [n/a]
           Name:   Bottle_Number ==> Bottle:Firing_Sequence
         Channel  2: Bottle_Number [n/a]
           Name:   Bottle:Position ==> Bottle_Number
         Channel  4: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F9.4 ==> F7.1
         Channel 11: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
        -CLEAN functions: 2022/01/28 15:24:04 20
         Reset #RECS, MIN & MAX values in header.
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE19plus  Data File:
      FileName = C:\2021-38 CBS-MEA Frosti\raw\2021-038_0209.hex
      Software version 2.2.0 SB_Terminal.dll
      Temperature SN = 6009
      Conductivity SN = 6009
      System UpLoad Time = Aug 22 2021 14:50:47
      <ApplicationData>
      <SeatermAF>
      <SoftwareVersion>2.1.0</SoftwareVersion>
      <BuildDate>25-Jul-2012 22:05:08 GMT</BuildDate>
      </SeatermAF>
      </ApplicationData>
      cast   6 22 Aug 2021 14:32:14 samples 23775 to 26535, avg = 1, stop = mag swit
    ch
       CPY-01
    # nquan = 18
    # nvalues = 164
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = bpos: Bottle Position in Carousel
    # name 2 = nbf: Bottles Fired
    # name 3 = prdM: Pressure, Strain Gauge [db]
    # name 4 = depSM: Depth [salt water, m], lat = 70.00
    # name 5 = tv290C: Temperature [ITS-90, deg C]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = flSP: Fluorescence, Seapoint
    # name 9 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 10 = seaTurbMtr: Turbidity, Seapoint [FTU]
    # name 11 = altM: Altimeter [m]
    # name 12 = dz/dtM: Descent Rate [m/s]
    # name 13 = svCM: Sound Velocity [Chen-Millero, m/s]
    # name 14 = sal00: Salinity, Practical [PSU]
    # name 15 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
    # name 16 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
    # name 17 = flag:  0.000e+00
    # interval = seconds: 0.25
    # start_time = Aug 22 2021 14:32:14 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="8" >
    #   <sensor Channel="1" >
    #     <!-- Count, Temperature -->
    #     <TemperatureSensor SensorID="58" >
    #       <SerialNumber>6009</SerialNumber>
    #       <CalibrationDate>22-Feb-20</CalibrationDate>
    #       <A0>1.24034138e-003</A0>
    #       <A1>2.63707519e-004</A1>
    #       <A2>-4.39280666e-007</A2>
    #       <A3>1.60140911e-007</A3>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 0, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>6009</SerialNumber>
    #       <CalibrationDate>22-Feb-20</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.00744174e+000</G>
    #         <H>1.21834136e-001</H>
    #         <I>-3.91939684e-004</I>
    #         <J>4.37532592e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>6009</SerialNumber>
    #       <CalibrationDate>12-Feb-20</CalibrationDate>
    #       <PA0>8.81885542e-001</PA0>
    #       <PA1>4.43040930e-003</PA1>
    #       <PA2>-2.94665912e-011</PA2>
    #       <PTEMPA0>-6.41486044e+001</PTEMPA0>
    #       <PTEMPA1>5.37720258e+001</PTEMPA1>
    #       <PTEMPA2>-3.71450223e-001</PTEMPA2>
    #       <PTCA0>5.25081807e+005</PTCA0>
    #       <PTCA1>1.42479043e+001</PTCA1>
    #       <PTCA2>-2.39768395e-001</PTCA2>
    #       <PTCB0>2.53131250e+001</PTCB0>
    #       <PTCB1>2.50000000e-005</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>615</SerialNumber>
    #       <CalibrationDate>615</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.6881e-001</Soc>
    #         <offset>-0.4776</offset>
    #         <A>-3.6840e-003</A>
    #         <B> 1.9729e-004</B>
    #         <C>-3.1505e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.3800</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Altimeter -->
    #     <AltimeterSensor SensorID="0" >
    #       <SerialNumber>With 1186 9+</SerialNumber>
    #       <CalibrationDate>28-May-14</CalibrationDate>
    #       <ScaleFactor>15.000</ScaleFactor>
    #       <Offset>0.000</Offset>
    #     </AltimeterSensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 2, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>2745</SerialNumber>
    #       <CalibrationDate>8 April 2021</CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>0</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 3, Turbidity Meter, Seapoint -->
    #     <OBS_SeapointTurbiditySensor SensorID="33" >
    #       <SerialNumber>11432</SerialNumber>
    #       <CalibrationDate>Oct 2012</CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>3</GainSetting>
    #       <ScaleFactor>1.000</ScaleFactor>
    #     </OBS_SeapointTurbiditySensor>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 4, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Jan 21 2022 13:07:47, 7.23.2
    # datcnv_in = D:\Telework\2021-038\Unprocessed\CTD19\2021-038_0209.hex D:\Telewo
    rk\2021-038\SBE19+\Processing\doc\2021-038-sbe19plus.xmlcon
    # datcnv_ox_hysteresis_correction = no
    # datcnv_ox_tau_correction = yes
    # datcnv_bottle_scan_range_source = BL file
    # datcnv_scans_per_bottle = 41
     END*

    Analysis methods:
    -----------------
    Salinity samples were collected in 200 mL type ll glass bottles with disposable
    nylon inserts and screw caps supplied by Ocean Scientific International Limited.
    They were analyzed in a temperature-controlled lab on a Guildline 8400B Salinometer
    standardized with IAPSO standard seawater 21 - 42 days after collection.
    For details including a precision analysis, see document QF2021-038_SAL*.xlsx.

    ---------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    An SBE19+ was used for this cast and most casts from this cruise.
    Fluorescence, Dissolved Oxygen and Turbidity are nominal and unedited, except that
    some records were removed in editing temperature and salinity.
    Salinity calibration samples were available and salinity is considered +/-0.003psu.

    For details on the processing see the report: 2021-038_Processing_Report.doc.
    --------------------------------------------------------------------------------------
!1- 2- --3--- --4--- ---5---- ---6--- --7--- ---8---- --9--- --10- ----11--- -12- -13- ---14--- 15
!Bo Bo Pressu Depth  Temperat Fluores Turbid Salinity Oxygen Oxyge Conductiv Samp Numb Salinity Fl
!tt tt re            ure      cence:  ity:   :T0:C0   :      n:    ity:      le_  er_o :Bottle  ag
!~u ~u                        URU:    Seapoi          Dissol Disso Primary   Numb ~bin          ~o
!en mb                        Seapoin nt              ved:   lved:           er   _rec          tt
!ce er                        t                       SBE    SBE                  ords          le
!-- -- ------ ------ -------- ------- ------ -------- ------ ----- --------- ---- ---- -------- --
*END OF HEADER
  4  4    4.6    4.5   6.0139   0.323    0.6  27.2516   7.80 341.1  2.741743  138   41  27.5078 0
  3  3   11.2   11.1   5.0271   0.489    0.6  27.6365   7.99 349.3  2.704078  137   41  27.8885 0
  2  2   18.6   18.4   4.7042   0.718    0.7  28.1202   8.10 354.0  2.723204  136   41  28.3235 0
  1  1   35.9   35.5   0.9440   0.762    0.9  30.5012   9.09 396.3  2.636600  135   41  30.2502 0