*2021/01/20 12:15:58.72 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *FILE START TIME : UTC 2019/08/14 20:58:31.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 17 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 4F01CF5C NUMBER OF CHANNELS : 25 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Bottle_Number n/a 1 17 2 Bottle:Firing_Sequence n/a 1 17 3 Pressure decibar 1.9 200.3 4 Depth metres 1.9 198.5 5 Temperature:Primary 'deg C (ITS90)' 9.5475 17.3093 6 Conductivity:Primary S/m 3.365222 3.868898 7 Transmissivity %/metre 31.6 52.3 8 Transmissivity:Green %/metre 38.71062 76.00144 9 Fluorescence:URU:Seapoint mg/m^3 0.103 1.495 10 PAR uE/m^2/sec 0 1493.9 11 Salinity:T0:C0 PSS-78 29.4246 31.3297 12 Oxygen:Dissolved:SBE mL/L 0.5E-01 7.45 13 Oxygen:Dissolved:SBE umol/kg 2.2 325.7 14 Sample_Number n/a 1 17 15 Number_of_bin_records n/a 241 241 16 Temperature:Draw 'deg C (ITS90)' 10.3 16.1 17 Oxygen:Dissolved mL/L 0 6.763 18 Oxygen:Dissolved umol/kg 0 295.6 19 Flag:Oxygen:Dissolved ' ' 20 Nitrate_plus_Nitrite umol/L 2.95 25.39 21 Flag:Nitrate_plus_Nitrite ' ' 22 Silicate umol/L 19.65 116.56 23 Flag:Silicate ' ' 24 Phosphate umol/L 0.67 6.092 25 Flag:Phosphate ' ' $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 3 I I 0 3 -99 ' ' 7 F ' ' 1 4 -99 ' ' 7 F ' ' 1 5 -99 ' ' 9 F ' ' 4 6 -99 ' ' 10 F ' ' 6 7 -99 ' ' 6 F ' ' 1 8 -99 ' ' 6 F ' ' 1 9 -99 ' ' 8 F ' ' 3 10 -99 ' ' 7 F ' ' 1 11 -99 ' ' 9 F ' ' 4 12 -99 ' ' 7 F ' ' 2 13 -99 ' ' 6 F ' ' 1 14 -99 ' ' 5 I I 0 15 ' ' ' ' 5 I I 0 16 -99 ' ' 6 F R4 1 17 -99 ' ' 8 F R4 3 18 -99 ' ' 6 F ' ' 1 19 0 ' ' 3 NQ C ' ' 20 -99 ' ' 7 F R4 2 21 0 ' ' 3 NQ C ' ' 22 -99 ' ' 7 F R4 2 23 0 ' ' 3 NQ C ' ' 24 -99 ' ' 8 F R4 3 25 0 ' ' 3 NQ C ' ' $END $REMARKS Quality flags have the following significance: ---------------------------------------------------------------------------------- 0 = Acceptable measurement with no header comment 1 = Sample for this measurement was collected but not analyzed. Sample lost. 2 = Acceptable measurement with header comment 3 = Questionable measurement (Probably Good) 4 = Poor measurement (Probably Bad) 5 = Measurement not reported (Bad) 6 = Mean of replicate measurements 7 = Manual chromatographic peak measurement 8 = Irregular digital chromatographic peak integration 9 = Sample was planned for this measurement from this bottle but was not collected ---------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2019-008 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : SI03 EVENT NUMBER : 1 LATITUDE : 48 35.51000 N ! (deg min) LONGITUDE : 123 30.29000 W ! (deg min) WATER DEPTH : 224 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0506 LOCATION : Mid-ship ! custom item $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------------------------- -------------- ---------- Temperature ' ' 2023 Conductivity ' ' 1763 'Pressure:Digiquartz with TC' ' ' 0506 Temperature:2 ' ' 5013 Conductivity:2 ' ' 3394 'Oxygen:SBE 43' ' ' 3234 Fluorometer:Seapoint ' ' 3640 'Transmissometer:WET Labs C-Star' ' ' 1185DR 'Transmissometer:WET Labs C-Star:2' ' ' 1883DG PAR/Irradiance:Biospherical/Licor ' ' 70613 Altimeter ' ' 62355 $END $REMARKS Software Version Seasave V 7.26.7.107 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 4.2.2 2020/01/24 08:24:51 4097 4097 CLEAN 5.2.3 2020/01/24 08:36:48 4097 4097 ADDSAMP 3.6 2020/01/24 11:27:30 4097 4097 BINAVE 4.2 2020/01/24 11:29:47 4097 17 MERGE 3.5.1 2020/02/24 15:59:14 17 17 CLEAN 5.2.4 2020/02/24 15:59:42 17 17 CALIB 12.0.1 2020/02/24 16:00:02 17 17 SORT 3.6 2020/02/24 16:00:08 17 17 REMOVECH 8.2 2020/02/24 16:00:45 17 17 CHGUNITS 3.1.2 2020/02/24 16:03:53 17 17 CHGUNITS 3.1.2 2020/02/24 16:04:16 17 17 REORDER 1.3.1 2020/02/24 16:50:54 ? ? SORT 3.6 2020/03/18 10:54:52 17 17 HDREDIT2 3.2 2020/03/18 10:55:28 ? ? CALIB 12.0.1 2021/01/20 12:15:58 17 17 $END $REMARKS -CLEAN functions: 2020/01/24 08:36:48 Reset #RECS, MIN & MAX values in header. Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\OSD_DataProcessing\Cruise_Data\2019-008\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2020/02/24 15:59:14 Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Temperature:Draw, Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Ammonium, Flag:Ammonium, Dimethyl_Sulphide, Flag:Dimethyl_Sulphide, Dimethylsulfoniopropionate_Dissolved, Flag:Dimethylsulfoniopropionate_Dissolved, Dimethylsulfoniopropionate_Total, Flag:Dimethylsulfoniopropionate_Total, HPLC:Chl-c3 [ ], HPLC:Chlide-a [ ], HPLC:MgDVP [ ], HPLC:Chl-c2, HPLC:Chl-c1, HPLC:Me-chlide, HPLC:Peri, HPLC:But-fuco, HPLC:Fuco, HPLC:Neo, HPLC:Pras, HPLC:Viola, HPLC:Hex-fuco, HPLC:Diadino, HPLC:Allo, HPLC:Diato, HPLC:Zea, HPLC:Lut, HPLC:Gyr-de, HPLC:Chl-b, HPLC:c2-MGDG, HPLC:DVChl-a, HPLC:Chl-a, HPLC:B-Car, HPLC:TChl-a, Flag:HPLC Primary file : Q:\OSD_DataProcessing\Cruise_Data\2019-008\Processing\hydro\2019-008-0001.samavg Secondary file: Q:\OSD_DataProcessing\Cruise_Data\2019-008\Processing\hydro\2019-008-0001.mrgcln1s Comments from secondary file: Q:\OSD_DataProcessing\Cruise_Data\2019-008\Processing\hydro\2019-008-0001.mrgcln1s --------------------------------------------------------------------------- -CLEAN functions: 2020/02/17 11:05:25 Reduce header to sections: FIL HIS COM Remarks removed from kept sections. Remove remark heading: "Comments from secondary" -SORT parameters: 2020/02/17 11:06:07 Sorted in ascending order of channel Bottle_Number -CLEAN functions: 2020/02/24 15:59:42 Reset #RECS, MIN & MAX values in header. Change character data from " " to "0" in channels Flag:* Remove Sea-Bird comments from the header. -CALIB parameters: 2020/02/24 16:00:02 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\OSD_DataProcessing\Cruise_Data\2019-008\Processing\doc\2019-008-recal1.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 18 Salinity:T0:C0 PSS-78 10 0.8300000E-02 0.1000000E+01 19 Salinity:T1:C1 PSS-78 10 0.4000000E-03 0.1000000E+01 20 Oxygen:Dissolved:SBE mL/L 10 0.1820000E-01 0.1034800E+01 -SORT parameters: 2020/02/24 16:00:08 Sorted in ascending order of channel Press* -REMOVECH 2020/02/24 16:00:45 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Altimeter [metres] Descent_Rate [m/s] Status:Pump Salinity:T1:C1 [PSS-78] Flag -CHANGE units: Temperature reference channel: Temperature:Primary Salinity reference channel: Salinity:T0:C0 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -CHANGE units: Temperature reference channel: Temperature:Draw Salinity reference channel: Salinity:T0:C0 'Oxygen:Dissolved' changed from mL/L to umol/kg -SORT parameters: 2020/03/18 10:54:52 Sorted in ascending order of channel Press* -HEADER EDITS: 2020/03/18 10:55:28 Applied edit header: D:\Telework\2019-008\Processing\doc\HYDRO\2019-008-bot-hdr.txt Channel 2: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 1: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number Channel 3: Pressure [decibar] Format: F10.3 ==> F7.1 Channel 4: Depth [metres] Name: Depth:Salt_Water ==> Depth Format: F10.3 ==> F7.1 Channel 6: Conductivity:Primary [S/m] Format: F11.6 ==> F10.6 Channel 8: Transmissivity:Green [%/metre] Name: Transmissivity2 ==> Transmissivity:Green Channel 10: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 12: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 16: Temperature:Draw [deg C (ITS90)] Units: ==> deg C (ITS90) Format: F7.2 ==> F6.1 Channel 17: Oxygen:Dissolved [mL/L] Units: ==> mL/L Channel 20: Nitrate_plus_Nitrite [umol/L] Units: ==> umol/L Format: F6.2 ==> F7.2 Channel 22: Silicate [umol/L] Units: ==> umol/L Channel 24: Phosphate [umol/L] Units: ==> umol/L -CALIB parameters: 2021/01/20 12:15:58 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = 2019-008-transcor.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Transmissivity:Green %/metre 10 -0.2000000E-01 0.1439800E+01 $END *COMMENTS Comments from secondary file: Q:\OSD_DataProcessing\Cruise_Data\2019-008\Processing\hydro\2019-008-0001.mrgcln1s --------------------------------------------------------------------------- Sample_Number 12: OXY: OXY-2 was miss-labelled as 13 but looks like missing duplicate for Bottle # 12 Sample_Number 13: OXY: Sample miss-labelled OXY-1 for bottle 14; CTD DO comparison shows value a very poor match to Bottle # 14 but close to Bottle #13. Sample_Number 14: OXY: Sample labelled as OXY-1 should have been labelled as 13; no replicates shown on rosette log. OXY-2 good match for 14 Sample_Number 1: PO4: Value extrapolated outside standard curve ; NO3: Sample anoxic, no result Sample_Number 2: PO4: Value extrapolated outside standard curve ; NO3: Sample anoxic, no result Sample_Number 3: NUTS: Sample intended as a duplicate, however, analysis problem resulted in one sample with bad data, PO4: Value extrapolated outside standard curve; NO3: Sample anoxic, no resul Sample_Number 4: PO4: Value extrapolated outside standard curve; ; NO3: Sample anoxic, no result Sample_Number 5: PO4: Value extrapolated outside standard curve Analysis methods: ----------------- Chlorophyll samples were filtered onto 25mm GF/F filters and stored in glass scintillation vials at -80C prior to analysis. Samples were extracted in 90% acetone at -20C for 24 hours in the lab and analyzed on a Turner 10AU fluorometer calibrated with commercially pure chlorophyll a standard (Sigma). Fluorescence readings taken before and after acidification were used to calculate chlorophyll and phaeopigment concentrations (Holm-Hansen et al 1965). Chlorophyll samples were analyzed at IOS in Room 2423 ~2 weeks after the cruise. The average of two samples is reported. Variability is assessed as the CV% (std dev / mean*100). Flags and comments apply to chlorophyll values only. Precision Statement: Chlorophyll values ranged from 0.03-10.66ug/l in 115 samples. Average %CV for this cruise was 2.80% with 0 out of 35 duplicate pairs having a CV>10% and 0 duplicate pairs having a CV>30%. Our average dataset %CV is 3.80% for 2013 - 2018 so the overall quality of this dataset is excellent. For details see worksheet “CV%” in file QF2019-008CHL*.xlsx. HPLC samples were filtered onto 47mm GF/F filters and stored at -80C prior to analysis. Samples were extracted in 95% methanol at -20C for 24 hours in the lab and analyzed on a WATERS 2695 HPLC separations system as detailed in Nemcek and Pena, 2014. Analysis was performed ~2 months after collection. The average of two samples is reported. Variability is assessed as the %CV (std dev/mean*100) for duplicate pairs. All pigments below the limit of detection (LOD) are assigned a zero value. TChl-a is the sum of Chl-a, DVchl-a, Chlide-a and Me-chlide For further information see file QF2019-008_HPLC*.xlsx. Oxygen samples were analyzed at sea using an automated Winkler titration System (Metrohm Dosimat model 876 and a UV light source and detector with a 365nm filter controlled by LV02_876 software designed and constructed by Scripps Institution of Oceanography) with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). For details including a duplicate analysis, see document QF2019-008OXY*.xlsx. Salinity samples were collected in 200 mL type ll glass bottles with disposable nylon inserts and screw caps supplied by Ocean Scientific International Limited. They were analyzed in a temperature-controlled lab on a Guildline 8400B Salinometer standardized with IAPSO standard seawater 13 - 25 days after collection. For details including a duplicate analysis, see document QF2019-008SAL*.xlsx. Nutrient samples were collected in plastic tubes and quick frozen in aluminum blocks stored in -20 freezer. One set of samples was collected and frozen immediately. Another set of samples from 400m and deeper (to be used for silicate analysis) was collected and stored at 4C in the dark. All samples were returned to IOS for analysis. They were analyzed using an Astoria analyzer following methods described in IOS Nutrient Methods (1996) Barwell-Clarke and Whitney. For details including a duplicate analysis, see document QF2019-008nuts*.xlsx. DMS samples were collected in 250mL ground glass stoppered bottles and stored in a fridge, in the dark and removed one at a time before analysis. A sample was loaded onto the stripper and purged with UHP Nitrogen for 10 minutes at ~100mL/min. The DMS was extracted from the water and absorbed into a Tenax TA trap kept at -80C. The trap was subsequently desorbed at 100 deg C (with a dewar containing boiling water) onto a Chromosil 330 column which eluted onto a Flame Photometric Detector (FPD). All samples were run as soon as possible after being collected. The minimum detectable level for DMS is 0.10 nmol/L, so “0” values should be interpreted as <0.1nmol/L. DMS data are limited to 2 significant figures. Unless otherwise indicated the % relative difference between duplicates is <20%. For more detail see file "2019-008 DMS report.doc" and for data and duplicate analysis see "QF2019-008_DMS*.xlsx." DMSP-D: Approximately 20-75mL of seawater was allowed to flow directly from the niskin into a magnetic filtration funnel containing a 0.7um GF/F filter. The first 3.5mL was collected in a polypropylene tube (15mL) containing 50uL of a 50% sulphuric acid solution. A new funnel and filter are used for each sample. Samples are hydrolized and run at IOS when time permits. DMPS-T: 3.5mL of seawater was collected directly from the niskin into a polypropylene tube (15mL) containing 50uL of a 50% sulphuric acid solution. DMSP-D and DMSP-T: Samples are stored in the dark at 4 degrees C for a minimum of 24 hours. They are hydrolized and analyzed later at the Institute of Ocean Sciences. The minimum detectable level is 0.1 nM, so “0” values should be interpreted as <0.1 nM. DMSP data are limited to 2 significant figures. Unless otherwise indicated the % relative difference between duplicates is <20%. For details on analysis and raw data, see document "QF2019-008 dmsp*.xlsx. References: 1. Barwell-Clarke, J. and Whitney, F. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. 2. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 3. Culberson, C.H. 1991. Dissolved oxygen. WOCE Hydrographic Programme Operations and Methods (July 1991). 15pp. 4. Holm-Hansen, O., Lorenzen, C.J., Holmes, R.W., and Strickland J.D.H. 1965. Fluorometric Determination of Chlorophyll. J.du Cons. Intl. Pour l’Epl. De la Mer. 30:3-15. 5. Holmes, R.M., Aminto, A., Kérouel, R., Hooker, B. A., and Peterson, B.J. (1999). A simple and precise method for measuring ammonium in marine and freshwater ecosystems. Can. J. Fish. Aquat. Sci., 56: 1801-1808. 6. Nemcek, N. and Peña, M.A. 2014. Institute of Ocean Sciences Protocols for Phytoplankton Pigment Analysis by HPLC. Can. Tech. Rep. Fish. Aquat. Sci. 3117: x + 80 p. * For PDF versions of these papers see folder \\Cruise_Data\DOCUMENTS\Analysis Reference Papers --------------------------------------------------------------------------------- CTD Data Processing Notes: -------------------------- Conductivity, Transmissivity, Fluorescence:URU:Seapoint and PAR data are nominal and unedited except that some records were removed in editing temperature and salinity. There were 2 WetLabs CStar transmissometers in use during this cruise: Channel Transmissometer refers to sensor #1185DR (650nm - red) Channel Transmissometer:Green refers to sensor #1883DG (530nm - green) For comparison with other Institute of Ocean Sciences cruises, note that the transmissometer wavelength is 650nm unless otherwise stated. NOTE: While the CTD fluorescence data are expressed in concentration units, they do not always compare well to extracted chlorophyll samples, particularly for casts far from shore. It is recommended that users check extracted chlorophyll values where available. For details on the processing see the report: 2019-008_Processing_Report.doc. --------------------------------------------------------------------------------- HPLC data will be available in March 2022. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Salinity:T0:C0 PSS-78 10 -99 () (0.83E-02 1) Salinity:T1:C1 PSS-78 10 -99 () (0.4E-03 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.182E-01 1.0348) Transmissivity:Green %/metre 10 -99 () (-0.2E-01 1.4398) $END !1- 2- --3--- --4--- ---5---- ----6---- --7-- --8-- ---9--- --10-- ---11--- --12-- --13- -14- -15- --16- ---17-- --18- 19 --20-- 21 --22-- 23 ---24-- 25 !Bo Bo Pressu Depth Temperat Conductiv Trans Trans Fluores PAR Salinity Oxygen Oxyge Samp Numb Tempe Oxygen: Oxyge Fl Nitrat Fl Silica Fl Phospha Fl !tt tt re ure: ity: missi missi cence: :T0:C0 : n: le_ er_o ratur Dissolv n: ag e_ ag te ag te ag !~u ~u Primary Primary vity vity: URU: Dissol Disso Numb ~bin e: ed Disso ~o plus_ ~t ~i ~p !mb en Green Seapoin ved: lved: er _rec Draw lved lv Nitrit ri ca ha !er ce t SBE SBE ords ed e te te te !-- -- ------ ------ -------- --------- ----- ----- ------- ------ -------- ------ ----- ---- ---- ----- ------- ----- -- ------ -- ------ -- ------- -- *END OF HEADER 17 17 1.9 1.9 17.3093 3.868898 34.4 46.3 0.994 1493.9 29.4246 7.45 325.7 17 241 16.1 6.763 295.6 0 2.95 0 19.94 0 0.670 0 16 16 10.0 10.0 13.3904 3.555854 45.0 63.3 1.495 124.1 29.5963 5.46 238.5 16 241 13.9 5.124 223.8 6 6.34 0 19.65 0 1.329 0 15 15 20.4 20.3 11.8704 3.456217 51.9 74.3 0.223 16.4 29.8532 3.79 165.2 15 241 12.4 3.582 156.4 0 17.62 0 31.72 0 1.909 0 14 14 40.3 39.9 10.6574 3.377015 52.3 76.0 0.138 0.7 30.0599 3.12 136.3 14 241 11.2 3.086 134.7 2 24.67 6 41.49 6 2.186 6 13 13 60.3 59.8 10.2861 3.397354 48.9 69.8 0.157 0.0 30.5622 2.74 119.6 13 241 10.4 2.694 117.5 2 25.39 0 47.56 0 2.367 0 12 12 75.5 74.9 9.5580 3.365222 47.8 67.4 0.114 0.0 30.8510 1.03 44.9 12 241 10.4 0.951 41.5 26 25.28 0 64.77 0 3.362 0 11 11 85.0 84.3 9.5570 3.380560 42.8 59.0 0.109 0.0 31.0037 0.69 30.3 11 241 10.3 0.693 30.2 0 23.03 0 68.62 0 3.491 0 10 10 90.4 89.7 9.5475 3.385146 44.9 62.5 0.107 0.0 31.0564 0.55 23.8 10 241 10.3 0.549 23.9 0 21.19 0 69.19 0 3.558 0 9 9 97.4 96.6 9.5961 3.393613 43.7 59.7 0.104 0.0 31.0975 0.62 27.0 9 241 10.3 0.644 28.1 0 21.63 0 67.57 0 3.466 0 8 8 100.2 99.3 9.6405 3.398076 41.9 57.1 0.112 0.0 31.1032 0.74 32.4 8 241 10.3 0.666 29.0 0 21.15 0 67.51 0 3.490 0 7 7 109.9 108.9 9.6307 3.405243 41.0 55.7 0.105 0.0 31.1804 0.50 21.8 7 241 10.4 0.660 28.8 0 19.91 0 70.03 0 3.603 0 6 6 120.3 119.3 9.6653 3.413667 36.7 48.5 0.103 0.0 31.2315 0.50 21.9 6 241 10.3 0.490 21.4 0 16.31 0 76.73 0 3.922 0 5 5 135.0 133.8 9.6754 3.419076 37.1 46.9 0.103 0.0 31.2714 0.31 13.4 5 241 10.4 0.257 11.2 0 10.62 0 83.67 0 4.059 2 4 4 150.0 148.7 9.6847 3.423317 39.4 50.4 0.109 0.0 31.3001 0.05 2.2 4 241 10.3 0.026 1.1 6 -99.00 1 99.85 0 4.726 2 3 3 165.0 163.6 9.6658 3.423493 42.3 58.7 0.120 0.0 31.3120 0.05 2.2 3 241 10.3 0.000 0.0 0 -99.00 1 115.48 2 5.996 2 2 2 185.3 183.6 9.6760 3.426675 49.5 70.8 0.122 0.0 31.3269 0.05 2.3 2 241 10.3 0.000 0.0 0 -99.00 1 116.56 0 6.092 2 1 1 200.3 198.5 9.6836 3.428236 31.6 38.7 0.122 0.0 31.3297 0.06 2.5 1 241 10.4 0.000 0.0 0 -99.00 1 115.27 0 5.943 2