*2018/11/05 10:09:03.59
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2018/08/21 04:30:54.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 101
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 26218E33
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         2.297          101.774
       2 Depth                      metres          2.274          100.893
       3 Temperature:Primary        'deg C (ITS90)' 9.4296         12.1445
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.321          1.908
       5 Salinity:T0:C0             PSS-78          30.1056        32.3062
       6 Oxygen:Dissolved:SBE       mL/L            3.628          5.755
       7 Oxygen:Dissolved:SBE       umol/kg         158.0229       251.2006
       8 Conductivity:Primary       S/m             3.498075       3.508576
       9 Number_of_bin_records      n/a             10             25
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '       10  F       ' '     6
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        P:\Cruise_Data_Processing\2018-090\Processing\derive\2018-090-0083.cnv
    $END

*ADMINISTRATION
    MISSION             : 2018-090
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : OPP - MEQ
    SCIENTIST           : Vagle S.
    PLATFORM            : Vector

*LOCATION
    GEOGRAPHIC AREA     : 'Boundary Pass, Juan de Fuca, Swiftsure Bank,'
        CONTINUED       : ' Barkeley Sound'
    STATION             : Haro 003
    EVENT NUMBER        : 83
    LATITUDE            :  48  27.78000 N  ! (deg min)
    LONGITUDE           : 123  11.60000 W  ! (deg min)
    WATER DEPTH         : 105

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2968
        Conductivity                       ' '             2173
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             0766
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SoftwareVersion>1.0</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/11/01 14:35:40      5352      5352
        CLEAN    5.2.3  2018/11/01 14:35:55      5352      5352
        CLIP     1.3    2018/11/01 14:36:45      5352      3433
        SHIFTDAT 3.4    2018/11/01 16:38:38      3433      3433
        DELETE   6.3    2018/11/02 08:37:16      3433      1580
        CTDEDIT  5.2.3  2018/11/02 15:52:47      1580      1465
        CALIB    11.9   2018/11/02 16:09:06      1465      1465
        FILTERS  4.3    2018/11/02 16:12:59      1465      1465
        BINAVE   4.2    2018/11/02 16:31:59      1465       101
        REMOVECH 8.2    2018/11/02 16:33:34       101       101
        CHGUNITS 3.1.1  2018/11/02 16:49:09       101       101
        REORDER  1.3.1  2018/11/05 10:09:00 ?         ?
        HDREDIT2 3.1.1  2018/11/05 10:09:03 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2018/11/01 14:35:45 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1920, 50000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    9
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    92.09 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2018/11/02 15:52:47
            115 records were deleted in this editing session.
         No data values were changed.
        -CALIB parameters: 2018/11/02 16:09:06
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1060000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    7
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2018/11/02 16:33:34
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2018/11/05 10:09:03
         Applied edit header: P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  8: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 48 27.78 N
      ** Longitude:123 11.60 W
      ** Station:Haro 003
      ** Depth: 105 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2018-08-21T04:30:51</DateTime>
               <EventSummary numEvents='282'/>
               <Power>
                  <vBattery>15.5</vBattery>
                  <vExternal>0.4</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>2.4</iExt>
                  <iSys>61.0</iSys>
                  <iCPU>15.1</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>112295936</Bytes>
                  <BytesFree>1864990720</BytesFree>
                  <Samples>1559665</Samples>
                  <SamplesFree>25902648</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>2968</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>2173</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>0766</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='282'/>
               <Event type='Console Suppress' count='16'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2018-08-21T04:30:54</startTime>
            <Data>
    # nquan = 11
    # nvalues = 5352
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       5352
    # span 1 =     -0.196,    102.090
    # span 2 =     -0.194,    101.199
    # span 3 =     9.4220,    15.6014
    # span 4 =    -0.4030,    64.5970
    # span 5 =     1.5412,     3.0581
    # span 6 =   0.031869,   3.581555
    # span 7 =     -1.404,      1.289
    # span 8 =     0.2031,    32.3155
    # span 9 =     3.4152,     9.4157
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Aug 21 2018 04:30:54 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2968</SerialNumber>
    #       <CalibrationDate>22-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.30535958e-003</G>
    #       <H>6.39798216e-004</H>
    #       <I>2.19306163e-005</I>
    #       <J>1.97019170e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2173</SerialNumber>
    #       <CalibrationDate>23-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01676051e+001</G>
    #         <H>1.39410479e+000</H>
    #         <I>-2.69269723e-003</I>
    #         <J>2.58106152e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0766</SerialNumber>
    #       <CalibrationDate>01-Mar-17</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3201e-001</Soc>
    #         <offset>-0.5240</offset>
    #         <A>-4.4417e-003</A>
    #         <B> 2.5497e-004</B>
    #         <C>-3.9030e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 31 2018 16:28:14, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2018-090\Processing\renamed CTD files\20
    18-090-0083.xml P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Nov 01 2018 10:22:46, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2018-090\Processing\convert\2018-090-0
    083.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 32
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Nov 01 2018 14:09:47, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2018-090\Processing\wildedit\2018-090-
    0083.cnv
    # alignctd_adv = sbeox0V 2.500
    # celltm_date = Nov 01 2018 14:11:25, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2018-090\Processing\align\2018-090-0083.
    cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 01 2018 14:12:24, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2018-090\Processing\celltm\2018-090-0083
    .cnv P:\Cruise_Data_Processing\2018-034\Processing\doc\2018-034-ctd.XMLCON
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove records corrupted by shed wakes near the top
     and bottom of the cast.
    ---------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Conductivity and Fluorescence data are nominal and unedited except that some
      records were removed in editing temperature and salinity.

    NOTE: While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore.

    The only data available for event #66 came from the soak period so they have not
      been processed.

    There was no calibration sampling during this cruise. Recalibration of dissolved
     oxygen data was based on an intercomparison with an SBE911 on one cast during a
     previous cruise. This is considered a rough estimate.

    Salinity was not recalibrated; rough comparisons during 2 previous cruises suggest
     it is within +/-0.005psu.

    For details on the processing see document: 2018-090_Processing_Report.doc.
    ---------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.06)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- ----8---- -9--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0   :      n:    ity:      er_o
!              Primary  URU:             Dissol Disso Primary   ~bin
!                       Wetlabs          ved:   lved:           _rec
!                                        SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ----- --------- ----
*END OF HEADER
    2.3    2.3  12.1436   1.895  30.1091   5.75 250.9  3.506106   13
    3.0    3.0  12.1445   1.753  30.1076   5.75 251.2  3.506043   25
    4.0    4.0  12.1438   1.691  30.1056   5.75 250.9  3.505818   24
    5.0    4.9  12.1191   1.472  30.1234   5.72 249.5  3.505638   23
    6.0    5.9  12.1132   1.534  30.1270   5.68 247.8  3.505565   22
    7.0    6.9  12.0641   1.796  30.1631   5.64 246.4  3.505232   20
    8.0    7.9  12.0444   1.768  30.1773   5.63 245.8  3.505095   16
    9.0    8.9  12.0350   1.588  30.1845   5.62 245.5  3.505096   19
   10.0    9.9  12.0393   1.767  30.1818   5.61 245.0  3.505215   19
   11.0   10.9  12.0082   1.738  30.2069   5.60 244.3  3.505251   16
   12.0   11.9  11.9904   1.744  30.2213   5.58 243.6  3.505324   15
   13.0   12.9  11.9899   1.908  30.2222   5.58 243.6  3.505413   15
   14.0   13.9  11.9916   1.677  30.2211   5.58 243.4  3.505424   15
   15.0   14.9  11.9540   1.815  30.2555   5.54 241.9  3.505904   15
   16.0   15.9  11.8621   1.819  30.3418   5.50 240.1  3.507154   16
   17.0   16.9  11.8300   1.769  30.3701   5.47 238.9  3.507423   15
   18.0   17.8  11.7908   1.567  30.4053   5.46 238.3  3.507790   15
   19.0   18.8  11.7848   1.702  30.4097   5.46 238.1  3.507776   15
   20.0   19.8  11.8007   1.659  30.3956   5.46 238.0  3.507707   15
   21.0   20.8  11.8085   1.787  30.3889   5.45 237.6  3.507713   14
   22.0   21.8  11.7823   1.489  30.4115   5.43 237.0  3.507877   14
   23.0   22.8  11.7583   1.556  30.4346   5.42 236.5  3.508138   11
   24.0   23.8  11.7516   1.626  30.4396   5.40 235.6  3.508262   14
   25.0   24.8  11.7541   1.718  30.4378   5.38 234.8  3.508325   13
   26.0   25.8  11.6730   1.606  30.5052   5.36 233.9  3.508473   15
   27.0   26.8  11.6668   1.716  30.5083   5.35 233.3  3.508306   14
   28.0   27.8  11.6287   1.662  30.5401   5.34 233.0  3.508390   14
   29.0   28.8  11.5996   1.383  30.5625   5.34 233.0  3.508272   14
   30.0   29.7  11.6324   1.557  30.5360   5.33 232.7  3.508363   14
   31.0   30.7  11.6255   1.416  30.5434   5.32 231.9  3.508576   14
   32.0   31.7  11.5673   1.458  30.5858   5.30 231.1  3.508048   14
   33.0   32.7  11.5620   1.513  30.5886   5.28 230.5  3.507930   14
   34.0   33.7  11.5504   1.396  30.5954   5.27 229.8  3.507679   15
   35.0   34.7  11.5276   1.388  30.6082   5.26 229.4  3.507114   14
   36.0   35.7  11.5184   1.359  30.6133   5.25 229.2  3.506885   14
   37.0   36.7  11.5184   1.432  30.6127   5.24 228.4  3.506867   14
   38.0   37.7  11.4767   1.388  30.6349   5.22 227.6  3.505637   14
   39.0   38.7  11.4469   1.553  30.6507   5.20 226.7  3.504769   15
   40.0   39.7  11.4363   1.548  30.6548   5.18 225.8  3.504321   14
   41.0   40.6  11.4166   1.223  30.6687   5.17 225.3  3.503736   10
   42.0   41.6  11.4061   1.419  30.6715   5.15 224.8  3.503546   14
   43.0   42.6  11.4015   1.335  30.6740   5.13 223.6  3.503462   15
   44.0   43.6  11.3863   1.465  30.6847   5.10 222.4  3.503300   14
   45.0   44.6  11.3235   1.223  30.7254   5.07 221.0  3.502164   15
   46.0   45.6  11.2802   1.525  30.7530   5.02 219.1  3.501333   14
   47.0   46.6  11.2393   1.287  30.7782   4.95 216.0  3.500469   14
   48.0   47.6  11.1149   1.191  30.8666   4.88 212.8  3.498909   13
   49.0   48.6  11.0071   1.083  30.9523   4.82 210.1  3.498440   14
   50.0   49.6  10.9143   1.054  31.0304   4.77 208.0  3.498464   14
   51.0   50.5  10.8870   0.882  31.0545   4.74 206.6  3.498615   14
   52.0   51.5  10.8540   0.793  31.0831   4.70 205.0  3.498828   10
   53.0   52.5  10.7756   0.883  31.1565   4.66 203.1  3.499442   14
   54.0   53.5  10.7042   0.861  31.2225   4.63 201.8  3.500009   13
   55.0   54.5  10.6962   0.909  31.2294   4.59 200.2  3.500057   14
   56.0   55.5  10.6507   0.792  31.2707   4.55 198.5  3.500342   13
   57.0   56.5  10.5789   0.830  31.3280   4.51 196.6  3.499962   13
   58.0   57.5  10.4735   0.776  31.4138   4.45 194.2  3.499510   13
   59.0   58.5  10.4229   0.851  31.4524   4.40 191.8  3.499037   13
   60.0   59.5  10.3733   0.704  31.4888   4.36 190.0  3.498433   13
   61.0   60.4  10.3278   0.646  31.5268   4.34 189.2  3.498341   13
   62.0   61.4  10.3168   0.683  31.5398   4.33 189.0  3.498721   13
   63.0   62.4  10.3123   0.634  31.5463   4.33 188.5  3.499030   13
   64.0   63.4  10.3064   0.693  31.5562   4.31 187.7  3.499532   11
   65.0   64.4  10.2621   0.665  31.5918   4.28 186.5  3.499296   13
   66.0   65.4  10.2287   0.657  31.6193   4.25 185.1  3.499184   14
   67.0   66.4  10.1930   0.686  31.6477   4.22 183.9  3.498953   13
   68.0   67.4  10.1593   0.679  31.6751   4.20 182.8  3.498789   13
   69.0   68.4  10.1100   0.590  31.7157   4.17 181.9  3.498581   14
   70.0   69.4  10.0893   0.562  31.7327   4.15 180.9  3.498519   13
   71.0   70.4  10.0721   0.597  31.7459   4.13 180.1  3.498373   14
   72.0   71.4  10.0448   0.586  31.7678   4.12 179.5  3.498206   14
   73.0   72.4  10.0279   0.581  31.7821   4.10 178.6  3.498198   14
   74.0   73.4  10.0303   0.555  31.7803   4.08 177.7  3.498259   12
   75.0   74.4   9.9973   0.634  31.8089   4.06 177.1  3.498268   13
   76.0   75.3   9.9822   0.573  31.8224   4.06 177.0  3.498342   13
   77.0   76.3   9.9786   0.542  31.8262   4.06 177.0  3.498446   14
   78.0   77.3   9.9818   0.488  31.8241   4.06 176.8  3.498548   15
   79.0   78.3   9.9775   0.547  31.8280   4.05 176.5  3.498610   13
   80.0   79.3   9.9806   0.535  31.8260   4.05 176.6  3.498723   14
   81.0   80.3   9.9832   0.569  31.8241   4.05 176.6  3.498800   13
   82.0   81.3   9.9788   0.631  31.8279   4.05 176.4  3.498840   14
   83.0   82.3   9.9714   0.495  31.8343   4.04 176.0  3.498873   13
   84.0   83.3   9.9637   0.551  31.8401   4.03 175.7  3.498818   13
   85.0   84.2   9.9621   0.538  31.8416   4.03 175.4  3.498865   13
   86.0   85.2   9.9559   0.571  31.8470   4.03 175.4  3.498903   13
   87.0   86.2   9.9491   0.610  31.8527   4.02 175.3  3.498913   13
   88.0   87.3   9.9419   0.498  31.8594   4.01 174.8  3.498989   13
   89.0   88.2   9.9271   0.513  31.8715   4.00 174.1  3.498946   12
   90.0   89.2   9.9175   0.583  31.8790   3.98 173.3  3.498883   13
   91.0   90.2   9.8874   0.569  31.9045   3.94 171.5  3.498823   13
   92.0   91.2   9.8260   0.496  31.9582   3.87 168.7  3.498796   13
   93.0   92.2   9.6748   0.524  32.0905   3.79 165.2  3.498619   12
   94.0   93.2   9.5173   0.364  32.2275   3.73 162.5  3.498286   13
   95.0   94.2   9.4954   0.520  32.2449   3.69 160.9  3.498104   12
   96.0   95.1   9.4760   0.415  32.2616   3.67 160.0  3.498075   13
   97.0   96.2   9.4545   0.321  32.2806   3.66 159.5  3.498090   13
   98.0   97.1   9.4441   0.388  32.2900   3.65 159.0  3.498138   14
   99.0   98.1   9.4414   0.383  32.2929   3.64 158.7  3.498221   16
  100.0   99.1   9.4333   0.348  32.3011   3.64 158.4  3.498348   17
  101.0  100.1   9.4300   0.354  32.3050   3.63 158.2  3.498491   20
  101.8  100.9   9.4296   0.369  32.3062   3.63 158.0  3.498596   13