*2018/11/05 10:09:03.40
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2018/08/20 05:42:34.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 84
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 56107901
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         0.864          83.602
       2 Depth                      metres          0.853          82.886
       3 Temperature:Primary        'deg C (ITS90)' 8.105          11.4247
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.168          2.824
       5 Salinity:T0:C0             PSS-78          32.3823        33.4927
       6 Oxygen:Dissolved:SBE       mL/L            3.073          6.58
       7 Oxygen:Dissolved:SBE       umol/kg         133.7012       286.6797
       8 Conductivity:Primary       S/m             3.493716       3.678848
       9 Number_of_bin_records      n/a             7              25
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '       10  F       ' '     6
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        P:\Cruise_Data_Processing\2018-090\Processing\derive\2018-090-0075.cnv
    $END

*ADMINISTRATION
    MISSION             : 2018-090
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : OPP - MEQ
    SCIENTIST           : Vagle S.
    PLATFORM            : Vector

*LOCATION
    GEOGRAPHIC AREA     : 'Boundary Pass, Juan de Fuca, Swiftsure Bank,'
        CONTINUED       : ' Barkeley Sound'
    STATION             : HFTA 0021b
    EVENT NUMBER        : 75
    LATITUDE            :  48  41.87000 N  ! (deg min)
    LONGITUDE           : 125  14.46000 W  ! (deg min)
    WATER DEPTH         : 85

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2968
        Conductivity                       ' '             2173
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             0766
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SoftwareVersion>1.0</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/11/01 14:35:37      4662      4662
        CLEAN    5.2.3  2018/11/01 15:05:13      4662      4662
        CLIP     1.3    2018/11/01 15:05:38      4662      2743
        SHIFTDAT 3.4    2018/11/01 16:38:37      2743      2743
        DELETE   6.3    2018/11/02 08:37:15      2743      1134
        CTDEDIT  5.2.3  2018/11/02 15:28:34      1134      1103
        CALIB    11.9   2018/11/02 16:09:05      1103      1103
        FILTERS  4.3    2018/11/02 16:12:58      1103      1103
        BINAVE   4.2    2018/11/02 16:31:59      1103        84
        REMOVECH 8.2    2018/11/02 16:33:34        84        84
        CHGUNITS 3.1.1  2018/11/02 16:49:09        84        84
        REORDER  1.3.1  2018/11/05 10:08:59 ?         ?
        HDREDIT2 3.1.1  2018/11/05 10:09:03 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2018/11/01 15:05:11 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1920, 50000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    9
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    73.84 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2018/11/02 15:28:34
             31 records were deleted in this editing session.
             42 changes in channel Salinity:T0:C0
        -CALIB parameters: 2018/11/02 16:09:05
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1060000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    7
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2018/11/02 16:33:34
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2018/11/05 10:09:03
         Applied edit header: P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  8: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude:48 41.87 N
      ** Longitude:125 14.46 W
      ** Station:HFTA 0021b
      ** Depth: 85 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2018-08-20T05:42:31</DateTime>
               <EventSummary numEvents='282'/>
               <Power>
                  <vBattery>15.3</vBattery>
                  <vExternal>0.1</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>2.4</iExt>
                  <iSys>63.5</iSys>
                  <iCPU>16.1</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>109051904</Bytes>
                  <BytesFree>1868234752</BytesFree>
                  <Samples>1514609</Samples>
                  <SamplesFree>25947704</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>2968</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>2173</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>0766</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='282'/>
               <Event type='Console Suppress' count='16'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2018-08-20T05:42:34</startTime>
            <Data>
    # nquan = 11
    # nvalues = 4662
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       4662
    # span 1 =     -0.192,     83.842
    # span 2 =     -0.190,     83.114
    # span 3 =     8.1030,    11.4676
    # span 4 =    -0.4030,    64.5970
    # span 5 =     1.3721,     3.0356
    # span 6 =   0.050166,   3.682228
    # span 7 =     -2.046,      2.026
    # span 8 =     0.3337,    33.4991
    # span 9 =     2.8862,     9.7294
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Aug 20 2018 05:42:34 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2968</SerialNumber>
    #       <CalibrationDate>22-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.30535958e-003</G>
    #       <H>6.39798216e-004</H>
    #       <I>2.19306163e-005</I>
    #       <J>1.97019170e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2173</SerialNumber>
    #       <CalibrationDate>23-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01676051e+001</G>
    #         <H>1.39410479e+000</H>
    #         <I>-2.69269723e-003</I>
    #         <J>2.58106152e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0766</SerialNumber>
    #       <CalibrationDate>01-Mar-17</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3201e-001</Soc>
    #         <offset>-0.5240</offset>
    #         <A>-4.4417e-003</A>
    #         <B> 2.5497e-004</B>
    #         <C>-3.9030e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 31 2018 16:28:08, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2018-090\Processing\renamed CTD files\20
    18-090-0075.xml P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Nov 01 2018 10:22:43, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2018-090\Processing\convert\2018-090-0
    075.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 32
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Nov 01 2018 14:09:44, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2018-090\Processing\wildedit\2018-090-
    0075.cnv
    # alignctd_adv = sbeox0V 2.500
    # celltm_date = Nov 01 2018 14:11:22, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2018-090\Processing\align\2018-090-0075.
    cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 01 2018 14:12:20, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2018-090\Processing\celltm\2018-090-0075
    .cnv P:\Cruise_Data_Processing\2018-034\Processing\doc\2018-034-ctd.XMLCON
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove records corrupted by shed wakes near the top
     and bottom of the cast; salinity was cleaned.
    ---------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Conductivity and Fluorescence data are nominal and unedited except that some
      records were removed in editing temperature and salinity.

    NOTE: While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore.

    The only data available for event #66 came from the soak period so they have not
      been processed.

    There was no calibration sampling during this cruise. Recalibration of dissolved
     oxygen data was based on an intercomparison with an SBE911 on one cast during a
     previous cruise. This is considered a rough estimate.

    Salinity was not recalibrated; rough comparisons during 2 previous cruises suggest
     it is within +/-0.005psu.

    For details on the processing see document: 2018-090_Processing_Report.doc.
    ---------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.06)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- ----8---- -9--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0   :      n:    ity:      er_o
!              Primary  URU:             Dissol Disso Primary   ~bin
!                       Wetlabs          ved:   lved:           _rec
!                                        SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ----- --------- ----
*END OF HEADER
    0.9    0.9  11.4247   2.824  32.3823   6.58 286.7  3.678848   25
    2.0    2.0  11.3603   2.477  32.3903   6.47 281.8  3.673949   14
    3.0    3.0  11.3730   2.668  32.3874   6.43 280.1  3.674838   16
    4.0    4.0  11.3367   2.618  32.3901   6.33 276.0  3.671982   14
    5.0    5.0  11.1715   2.444  32.4021   6.20 270.3  3.658579   16
    6.0    6.0  11.0434   1.870  32.4081   6.11 266.4  3.647442   15
    7.0    6.9  11.0286   1.523  32.4037   6.03 262.7  3.646258   13
    8.0    7.9  11.0057   1.719  32.4059   5.87 255.6  3.643733   12
    9.0    8.9  10.6147   1.492  32.4281   5.66 246.7  3.611918   14
   10.0    9.9  10.5687   0.956  32.4310   5.52 240.4  3.607757   16
   11.0   10.9  10.4505   0.857  32.4393   5.43 236.5  3.598113   15
   12.0   11.9  10.3490   0.907  32.4414   5.37 233.8  3.589340   13
   13.0   12.9  10.3183   0.963  32.4424   5.31 231.4  3.586758   11
   14.0   13.9  10.2634   1.071  32.4486   5.27 229.5  3.582528   12
   15.0   14.9  10.2139   1.119  32.4529   5.23 227.7  3.578610   14
   16.0   15.8  10.1946   1.136  32.4533   5.16 224.6  3.576975   17
   17.0   16.9  10.1298   1.113  32.4622   5.02 218.8  3.571960   13
   18.0   17.8   9.8866   1.004  32.5033   4.90 213.3  3.555499    9
   19.0   18.8   9.8250   0.811  32.5127   4.82 210.1  3.550171   11
   20.0   19.9   9.8130   0.794  32.5149   4.77 207.6  3.549371   10
   21.0   20.8   9.7817   0.792  32.5211   4.71 205.2  3.547243   14
   22.0   21.8   9.7269   0.817  32.5377   4.62 201.3  3.544051   18
   23.0   22.8   9.6282   0.751  32.5776   4.51 196.3  3.539246   12
   24.0   23.8   9.5433   0.643  32.5913   4.41 192.1  3.533107   10
   25.0   24.8   9.4774   0.526  32.6051   4.35 189.5  3.528654   10
   26.0   25.8   9.4641   0.470  32.6080   4.31 187.7  3.527799   12
   27.0   26.8   9.4531   0.500  32.6113   4.28 186.5  3.527192   17
   28.0   27.7   9.4438   0.448  32.6126   4.24 184.8  3.526534   16
   29.0   28.7   9.4279   0.446  32.6142   4.18 182.1  3.525316   11
   30.0   29.7   9.3716   0.442  32.6287   4.11 179.0  3.521778   11
   31.0   30.7   9.3013   0.330  32.6508   4.05 176.2  3.517745   10
   32.0   31.7   9.2503   0.268  32.6711   3.99 173.7  3.515235   13
   33.0   32.7   9.2145   0.278  32.6911   3.94 171.8  3.514035   15
   34.0   33.7   9.1938   0.258  32.7033   3.93 170.9  3.513423   14
   35.0   34.7   9.1845   0.245  32.7094   3.92 170.6  3.513236   12
   36.0   35.7   9.1832   0.232  32.7119   3.91 170.3  3.513407   11
   37.0   36.7   9.1786   0.224  32.7173   3.90 169.9  3.513560    9
   38.0   37.7   9.1718   0.222  32.7256   3.88 169.1  3.513803   10
   39.0   38.7   9.1484   0.199  32.7415   3.85 167.8  3.513315   10
   40.0   39.7   9.0952   0.196  32.7742   3.83 166.7  3.511787   12
   41.0   40.7   9.0689   0.235  32.7916   3.80 165.4  3.511175   18
   42.0   41.6   9.0393   0.218  32.8115   3.77 164.0  3.510501   17
   43.0   42.6   9.0147   0.227  32.8341   3.73 162.5  3.510545   11
   44.0   43.6   8.9451   0.190  32.8954   3.70 161.0  3.510293   10
   45.0   44.7   8.9130   0.213  32.9207   3.66 159.4  3.509908   11
   46.0   45.6   8.8448   0.225  32.9730   3.62 157.6  3.508903   14
   47.0   46.6   8.7646   0.224  33.0364   3.59 156.1  3.507861   16
   48.0   47.5   8.7204   0.244  33.0753   3.57 155.4  3.507675   12
   49.0   48.5   8.7105   0.274  33.0910   3.57 155.4  3.508344   10
   50.0   49.6   8.7128   0.197  33.0939   3.58 155.7  3.508868   10
   51.0   50.6   8.7154   0.211  33.0966   3.60 156.6  3.509401   10
   52.0   51.6   8.7222   0.226  33.1143   3.65 158.6  3.511738   13
   53.0   52.6   8.7310   0.237  33.1540   3.71 161.4  3.516366   14
   54.0   53.5   8.7351   0.256  33.1665   3.75 163.2  3.517968   12
   55.0   54.5   8.7354   0.294  33.1758   3.77 164.0  3.518920   11
   56.0   55.5   8.7319   0.285  33.1795   3.79 164.8  3.519004   11
   57.0   56.5   8.7344   0.282  33.1875   3.83 166.6  3.520038   15
   58.0   57.5   8.7520   0.262  33.2115   3.89 169.1  3.523950   17
   59.0   58.4   8.7173   0.290  33.2389   3.91 170.0  3.523491   14
   60.0   59.4   8.6871   0.317  33.2509   3.91 170.3  3.521981   10
   61.0   60.5   8.6775   0.350  33.2521   3.92 170.4  3.521279   10
   62.0   61.5   8.6672   0.313  33.2534   3.91 170.1  3.520529   10
   63.1   62.5   8.6406   0.276  33.2529   3.90 169.9  3.518132   14
   64.0   63.4   8.5859   0.286  33.2534   3.89 169.2  3.513330   22
   64.9   64.4   8.4469   0.217  33.3016   3.80 165.2  3.505504   14
   66.0   65.4   8.4152   0.202  33.3276   3.67 159.8  3.505182    9
   67.0   66.4   8.3869   0.208  33.3537   3.57 155.2  3.505155    9
   68.0   67.4   8.3749   0.232  33.3668   3.48 151.6  3.505363   10
   69.1   68.5   8.3634   0.256  33.3700   3.45 150.0  3.504687   14
   70.0   69.4   8.3506   0.211  33.3732   3.47 150.9  3.503878   25
   70.9   70.3   8.3250   0.222  33.3837   3.46 150.5  3.502618   14
   72.0   71.3   8.2852   0.219  33.4038   3.40 147.9  3.500995   10
   73.0   72.4   8.2688   0.199  33.4200   3.35 145.6  3.501095    8
   74.0   73.4   8.2465   0.190  33.4243   3.32 144.3  3.499550    8
   75.0   74.4   8.2252   0.187  33.4324   3.30 143.5  3.498448   10
   76.1   75.4   8.2120   0.197  33.4393   3.29 143.0  3.497966   20
   76.9   76.2   8.2051   0.194  33.4419   3.28 142.6  3.497617   24
   78.0   77.3   8.1931   0.193  33.4459   3.26 141.7  3.496962   12
   79.0   78.3   8.1909   0.195  33.4471   3.24 141.1  3.496933   10
   80.0   79.3   8.1877   0.194  33.4494   3.23 140.7  3.496906   10
   81.0   80.3   8.1866   0.194  33.4507   3.23 140.3  3.496979   12
   82.0   81.3   8.1807   0.234  33.4552   3.20 139.4  3.496914   16
   83.0   82.3   8.1493   0.168  33.4718   3.15 137.2  3.495693   18
   83.6   82.9   8.1050   0.176  33.4927   3.07 133.7  3.493716    7