*2018/11/05 10:09:02.92
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2018/08/18 21:08:13.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 55
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 516921C9
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         0.304          53.916
       2 Depth                      metres          0.295          53.453
       3 Temperature:Primary        'deg C (ITS90)' 8.2066         10.8472
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.18           3.156
       5 Salinity:T0:C0             PSS-78          32.3799        33.5332
       6 Oxygen:Dissolved:SBE       mL/L            3.141          7.018
       7 Oxygen:Dissolved:SBE       umol/kg         136.6921       305.7327
       8 Conductivity:Primary       S/m             3.493919       3.627009
       9 Number_of_bin_records      n/a             9              23
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '       10  F       ' '     6
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        P:\Cruise_Data_Processing\2018-090\Processing\derive\2018-090-0042.cnv
    $END

*ADMINISTRATION
    MISSION             : 2018-090
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : OPP - MEQ
    SCIENTIST           : Vagle S.
    PLATFORM            : Vector

*LOCATION
    GEOGRAPHIC AREA     : 'Boundary Pass, Juan de Fuca, Swiftsure Bank,'
        CONTINUED       : ' Barkeley Sound'
    STATION             : HFTA 0011
    EVENT NUMBER        : 42
    LATITUDE            :  48  34.70000 N  ! (deg min)
    LONGITUDE           : 124  45.24000 W  ! (deg min)
    WATER DEPTH         : 55

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2968
        Conductivity                       ' '             2173
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             0766
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SoftwareVersion>1.0</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/11/01 14:35:33      5221      5221
        CLEAN    5.2.3  2018/11/01 14:35:50      5221      5221
        CLIP     1.3    2018/11/01 14:36:42      5221      3302
        SHIFTDAT 3.4    2018/11/01 16:38:36      3302      3302
        DELETE   6.3    2018/11/02 08:37:14      3302       835
        CTDEDIT  5.2.3  2018/11/02 13:42:28       835       789
        CALIB    11.9   2018/11/02 16:09:04       789       789
        FILTERS  4.3    2018/11/02 16:12:58       789       789
        BINAVE   4.2    2018/11/02 16:31:57       789        55
        REMOVECH 8.2    2018/11/02 16:33:33        55        55
        CHGUNITS 3.1.1  2018/11/02 16:49:09        55        55
        REORDER  1.3.1  2018/11/05 10:08:59 ?         ?
        HDREDIT2 3.1.1  2018/11/05 10:09:02 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2018/11/01 14:35:45 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1920, 50000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    9
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    44.01 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2018/11/02 13:42:28
             46 records were deleted in this editing session.
             48 changes in channel Salinity:T0:C0
        -CALIB parameters: 2018/11/02 16:09:04
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1060000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    7
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2018/11/02 16:33:33
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2018/11/05 10:09:02
         Applied edit header: P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  8: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 48 34.70 N
      ** Longitude:124 45.24 W
      ** Station:HFTA 0011
      ** Depth: 55 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2018-08-18T21:08:10</DateTime>
               <EventSummary numEvents='282'/>
               <Power>
                  <vBattery>15.4</vBattery>
                  <vExternal>0.5</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>61.0</iSys>
                  <iCPU>14.2</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>103120896</Bytes>
                  <BytesFree>1874165760</BytesFree>
                  <Samples>1432234</Samples>
                  <SamplesFree>26030080</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>2968</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>2173</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>0766</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='282'/>
               <Event type='Console Suppress' count='16'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2018-08-18T21:08:13</startTime>
            <Data>
    # nquan = 11
    # nvalues = 5221
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       5221
    # span 1 =     -0.088,     54.012
    # span 2 =     -0.087,     53.547
    # span 3 =     8.2047,    13.4215
    # span 4 =    -0.4030,    64.5970
    # span 5 =     1.3897,     3.0038
    # span 6 =   0.032524,   3.663168
    # span 7 =     -1.793,      1.535
    # span 8 =     0.2029,    33.5348
    # span 9 =     2.9427,     9.5760
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Aug 18 2018 21:08:13 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2968</SerialNumber>
    #       <CalibrationDate>22-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.30535958e-003</G>
    #       <H>6.39798216e-004</H>
    #       <I>2.19306163e-005</I>
    #       <J>1.97019170e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2173</SerialNumber>
    #       <CalibrationDate>23-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01676051e+001</G>
    #         <H>1.39410479e+000</H>
    #         <I>-2.69269723e-003</I>
    #         <J>2.58106152e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0766</SerialNumber>
    #       <CalibrationDate>01-Mar-17</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3201e-001</Soc>
    #         <offset>-0.5240</offset>
    #         <A>-4.4417e-003</A>
    #         <B> 2.5497e-004</B>
    #         <C>-3.9030e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 31 2018 16:27:57, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2018-090\Processing\renamed CTD files\20
    18-090-0042.xml P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Nov 01 2018 10:22:39, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2018-090\Processing\convert\2018-090-0
    042.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 32
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Nov 01 2018 14:09:40, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2018-090\Processing\wildedit\2018-090-
    0042.cnv
    # alignctd_adv = sbeox0V 2.500
    # celltm_date = Nov 01 2018 14:11:17, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2018-090\Processing\align\2018-090-0042.
    cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 01 2018 14:12:14, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2018-090\Processing\celltm\2018-090-0042
    .cnv P:\Cruise_Data_Processing\2018-034\Processing\doc\2018-034-ctd.XMLCON
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove records corrupted by shed wakes near the top
     and bottom of the cast; salinity was cleaned.
    ---------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Conductivity and Fluorescence data are nominal and unedited except that some
      records were removed in editing temperature and salinity.

    NOTE: While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore.

    The only data available for event #66 came from the soak period so they have not
      been processed.

    There was no calibration sampling during this cruise. Recalibration of dissolved
     oxygen data was based on an intercomparison with an SBE911 on one cast during a
     previous cruise. This is considered a rough estimate.

    Salinity was not recalibrated; rough comparisons during 2 previous cruises suggest
     it is within +/-0.005psu.

    For details on the processing see document: 2018-090_Processing_Report.doc.
    ---------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.06)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- ----8---- -9--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0   :      n:    ity:      er_o
!              Primary  URU:             Dissol Disso Primary   ~bin
!                       Wetlabs          ved:   lved:           _rec
!                                        SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ----- --------- ----
*END OF HEADER
    0.3    0.3  10.8472   1.832  32.3799   7.02 305.7  3.627009   17
    1.0    0.9  10.8301   1.964  32.3828   6.99 304.5  3.625827   18
    2.0    2.0  10.7662   2.292  32.3904   6.85 298.4  3.621024   15
    3.0    3.0  10.5067   2.760  32.4210   6.60 287.6  3.601619   17
    4.0    4.0  10.2166   2.680  32.4334   6.16 268.3  3.576503   23
    5.0    4.9   9.9805   3.156  32.4496   5.62 244.6  3.557163   22
    6.0    5.9   9.8762   2.640  32.4521   5.26 229.2  3.548185   17
    7.0    6.9   9.8191   2.108  32.4492   5.09 221.6  3.542882   14
    8.0    7.9   9.7960   2.079  32.4444   4.98 217.0  3.540415   11
    9.0    8.9   9.7734   1.349  32.4409   4.89 212.9  3.538110   12
   10.0    9.9   9.7407   1.248  32.4417   4.76 207.2  3.535346   13
   11.0   10.9   9.6413   0.796  32.4478   4.59 199.9  3.527200   17
   12.0   11.9   9.6070   0.484  32.4594   4.46 194.2  3.525341   19
   13.0   12.9   9.5519   0.379  32.5023   4.42 192.4  3.524822   16
   14.0   13.9   9.5384   0.564  32.5154   4.40 191.5  3.524825   12
   15.0   14.9   9.5367   0.465  32.5117   4.39 191.0  3.524367   11
   16.0   15.9   9.5378   0.488  32.5106   4.39 191.0  3.524406   12
   17.0   16.9   9.5374   0.451  32.5200   4.40 191.6  3.525327   12
   18.0   17.8   9.5423   0.706  32.5357   4.42 192.6  3.527332   14
   19.0   18.8   9.5251   0.929  32.5533   4.39 191.3  3.527567   14
   20.0   19.8   9.4565   0.744  32.5622   4.30 187.3  3.522405   17
   21.0   20.8   9.4112   0.409  32.5726   4.23 184.1  3.519452   15
   22.0   21.8   9.4019   0.322  32.5770   4.20 182.9  3.519093   13
   23.0   22.8   9.3998   0.285  32.5824   4.19 182.3  3.519475   11
   24.0   23.8   9.3841   0.374  32.6028   4.17 181.4  3.520122   11
   25.0   24.8   9.3383   0.412  32.6318   4.12 179.5  3.518921   14
   26.0   25.8   9.2955   0.439  32.6486   4.06 176.9  3.516799   16
   27.0   26.7   9.2396   0.401  32.6819   4.00 174.3  3.515116   16
   28.0   27.8   9.2066   0.366  32.7018   3.94 171.8  3.514153   14
   29.0   28.8   9.1568   0.377  32.7190   3.89 169.2  3.511446   13
   30.0   29.7   9.1247   0.312  32.7310   3.83 166.8  3.509803   11
   31.0   30.7   9.0869   0.260  32.7432   3.77 164.4  3.507674   11
   32.0   31.7   9.0443   0.258  32.7693   3.71 161.4  3.506456   12
   33.0   32.7   8.9566   0.265  32.8219   3.63 158.2  3.503776   12
   34.0   33.7   8.8548   0.255  32.8837   3.55 154.4  3.500712   15
   35.0   34.7   8.7921   0.207  32.9132   3.47 151.2  3.498010   18
   36.0   35.7   8.7782   0.205  32.9186   3.43 149.4  3.497336   15
   37.0   36.7   8.7632   0.222  32.9267   3.40 148.2  3.496871   11
   38.0   37.7   8.7247   0.217  32.9525   3.38 147.1  3.495907   13
   39.0   38.6   8.7254   0.207  32.9526   3.36 146.3  3.496019   13
   40.0   39.6   8.7183   0.204  32.9588   3.33 145.0  3.496027   12
   41.0   40.6   8.6695   0.194  32.9971   3.29 143.0  3.495383   11
   42.0   41.6   8.5742   0.194  33.0728   3.25 141.4  3.494146   10
   43.0   42.6   8.5300   0.196  33.1113   3.22 140.3  3.493919   12
   44.0   43.6   8.5090   0.198  33.1422   3.21 139.5  3.495018   15
   45.0   44.6   8.5037   0.194  33.1504   3.19 138.9  3.495378   17
   46.0   45.6   8.4816   0.180  33.1733   3.18 138.3  3.495615   14
   47.0   46.6   8.4627   0.190  33.1920   3.17 137.8  3.495754   14
   48.0   47.6   8.4412   0.234  33.2156   3.15 137.3  3.496111   13
   49.0   48.6   8.4170   0.206  33.2433   3.14 136.7  3.496611   15
   50.0   49.6   8.3594   0.200  33.3116   3.14 136.8  3.497963   14
   51.0   50.6   8.3196   0.186  33.3596   3.15 137.2  3.498984   11
   52.0   51.6   8.2797   0.194  33.4209   3.17 137.9  3.501089    9
   53.1   52.6   8.2238   0.213  33.5142   3.19 138.6  3.505055   15
   53.9   53.5   8.2066   0.242  33.5332   3.18 138.5  3.505336   22