*2018/11/05 10:09:02.33
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2018/08/16 16:12:32.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 67
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : C86F22C4
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.012          66.816
       2 Depth                      metres          1.002          66.244
       3 Temperature:Primary        'deg C (ITS90)' 8.115          10.9635
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.484          14.588
       5 Salinity:T0:C0             PSS-78          32.2634        33.5821
       6 Oxygen:Dissolved:SBE       mL/L            3.26           8.266
       7 Oxygen:Dissolved:SBE       umol/kg         141.8278       360.1396
       8 Conductivity:Primary       S/m             3.502239       3.625332
       9 Number_of_bin_records      n/a             3              45
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '       10  F       ' '     6
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        P:\Cruise_Data_Processing\2018-090\Processing\derive\2018-090-0003.cnv
    $END

*ADMINISTRATION
    MISSION             : 2018-090
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : OPP - MEQ
    SCIENTIST           : Vagle S.
    PLATFORM            : Vector

*LOCATION
    GEOGRAPHIC AREA     : 'Boundary Pass, Juan de Fuca, Swiftsure Bank,'
        CONTINUED       : ' Barkeley Sound'
    STATION             : Swiftsure
    EVENT NUMBER        : 3
    LATITUDE            :  48  30.86000 N  ! (deg min)
    LONGITUDE           : 124  56.34000 W  ! (deg min)
    WATER DEPTH         : 77

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2968
        Conductivity                       ' '             2173
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             0766
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SoftwareVersion>1.0</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/11/01 14:35:26      6669      6669
        CLEAN    5.2.3  2018/11/01 14:35:45      6669      6669
        CLIP     1.3    2018/11/01 14:36:38      6669      4750
        SHIFTDAT 3.4    2018/11/01 16:38:32      4750      4750
        DELETE   6.3    2018/11/02 08:37:11      4750      1281
        CTDEDIT  5.2.3  2018/11/02 09:20:15      1281      1131
        CALIB    11.9   2018/11/02 16:09:02      1131      1131
        FILTERS  4.3    2018/11/02 16:12:56      1131      1131
        BINAVE   4.2    2018/11/02 16:31:56      1131        67
        REMOVECH 8.2    2018/11/02 16:33:32        67        67
        CHGUNITS 3.1.1  2018/11/02 16:49:08        67        67
        REORDER  1.3.1  2018/11/05 10:08:58 ?         ?
        HDREDIT2 3.1.1  2018/11/05 10:09:02 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2018/11/01 14:35:45
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1920, 50000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    9
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    57.28 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2018/11/02 09:20:15
            150 records were deleted in this editing session.
              1 change  in channel Temperature:Primary
             17 changes in channel Salinity:T0:C0
        -CALIB parameters: 2018/11/02 16:09:02
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1060000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    7
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2018/11/02 16:33:32
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2018/11/05 10:09:02
         Applied edit header: P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  8: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 48 30.86 N
      ** Longitude:124 56.34 W
      ** Station: swiftsure
      ** Depth: 77 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2018-08-16T16:12:29</DateTime>
               <EventSummary numEvents='282'/>
               <Power>
                  <vBattery>14.3</vBattery>
                  <vExternal>0.4</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>63.5</iSys>
                  <iCPU>14.4</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>94732288</Bytes>
                  <BytesFree>1882554368</BytesFree>
                  <Samples>1315726</Samples>
                  <SamplesFree>26146588</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>2968</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>2173</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>0766</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='282'/>
               <Event type='Console Suppress' count='16'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2018-08-16T16:12:32</startTime>
            <Data>
    # nquan = 11
    # nvalues = 6669
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       6669
    # span 1 =     -0.078,     67.275
    # span 2 =     -0.078,     66.694
    # span 3 =     8.0872,    13.3905
    # span 4 =    -0.4030,    35.2743
    # span 5 =     1.4198,     3.0916
    # span 6 =  -0.008174,   3.687519
    # span 7 =     -2.115,      1.681
    # span 8 =     0.0000,    33.5937
    # span 9 =     3.0522,     9.7072
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Aug 16 2018 16:12:32 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2968</SerialNumber>
    #       <CalibrationDate>22-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.30535958e-003</G>
    #       <H>6.39798216e-004</H>
    #       <I>2.19306163e-005</I>
    #       <J>1.97019170e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2173</SerialNumber>
    #       <CalibrationDate>23-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01676051e+001</G>
    #         <H>1.39410479e+000</H>
    #         <I>-2.69269723e-003</I>
    #         <J>2.58106152e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0766</SerialNumber>
    #       <CalibrationDate>01-Mar-17</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3201e-001</Soc>
    #         <offset>-0.5240</offset>
    #         <A>-4.4417e-003</A>
    #         <B> 2.5497e-004</B>
    #         <C>-3.9030e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 31 2018 16:27:42, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2018-090\Processing\renamed CTD files\20
    18-090-0003.xml P:\Cruise_Data_Processing\2018-090\Processing\doc\2018-090-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Nov 01 2018 10:22:31, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2018-090\Processing\convert\2018-090-0
    003.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 32
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Nov 01 2018 14:09:34, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2018-090\Processing\wildedit\2018-090-
    0003.cnv
    # alignctd_adv = sbeox0V 2.500
    # celltm_date = Nov 01 2018 14:11:08, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2018-090\Processing\align\2018-090-0003.
    cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 01 2018 14:11:53, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2018-090\Processing\celltm\2018-090-0003
    .cnv P:\Cruise_Data_Processing\2018-034\Processing\doc\2018-034-ctd.XMLCON
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    The descent rate of the CTD was very noisy with some complete reversals of direction.
    CTDEDIT was used to remove some records corrupted by shed wakes;
     salinity was cleaned.
    ---------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Conductivity and Fluorescence data are nominal and unedited except that some
      records were removed in editing temperature and salinity.

    NOTE: While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore.

    The only data available for event #66 came from the soak period so they have not
      been processed.

    There was no calibration sampling during this cruise. Recalibration of dissolved
     oxygen data was based on an intercomparison with an SBE911 on one cast during a
     previous cruise. This is considered a rough estimate.

    Salinity was not recalibrated; rough comparisons during 2 previous cruises suggest
     it is within +/-0.005psu.

    For details on the processing see document: 2018-090_Processing_Report.doc.
    ---------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.06)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- ----8---- -9--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0   :      n:    ity:      er_o
!              Primary  URU:             Dissol Disso Primary   ~bin
!                       Wetlabs          ved:   lved:           _rec
!                                        SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ----- --------- ----
*END OF HEADER
    1.0    1.0  10.9635  12.351  32.2634   8.27 360.1  3.625332   25
    2.1    2.1  10.8442  12.735  32.2906   8.08 352.0  3.617874   45
    2.9    2.9  10.7801  13.677  32.3113   7.90 344.0  3.614242   17
    4.1    4.1  10.5598  14.002  32.3834   7.63 332.2  3.601955    3
    5.1    5.1  10.3101  14.588  32.4562   7.15 311.3  3.586689    4
    6.0    6.0  10.0604  11.304  32.5084   6.60 287.3  3.570076   18
    7.0    6.9  10.0188   9.597  32.5411   6.43 280.2  3.569661   20
    8.0    7.9  10.0143   9.330  32.5619   6.42 279.6  3.571340   16
    9.0    8.9  10.0057   9.155  32.5741   6.38 277.9  3.571836   13
   10.0    9.9   9.9694   8.717  32.5877   6.32 275.3  3.569988   12
   11.1   11.0   9.9215   8.398  32.6099   6.24 271.6  3.567956   14
   12.0   11.9   9.8489   8.277  32.6390   6.06 263.9  3.564396   28
   12.9   12.8   9.7328   7.717  32.6834   5.77 251.4  3.558426   15
   14.0   13.9   9.6290   6.233  32.7468   5.57 242.7  3.555469   11
   15.0   14.9   9.5525   4.844  32.8623   5.42 236.0  3.559654    9
   15.9   15.8   9.5107   4.149  32.9083   5.29 230.1  3.560750   14
   17.0   16.8   9.4868   3.693  32.9325   5.09 221.8  3.561003   10
   18.0   17.9   9.4443   3.053  32.9700   5.02 218.4  3.560896   11
   19.0   18.9   9.3911   2.301  33.0085   4.93 214.7  3.559922   13
   20.0   19.8   9.3862   2.020  33.0143   4.86 211.4  3.560087   14
   21.0   20.8   9.3497   1.671  33.0304   4.80 208.8  3.558425   11
   21.9   21.7   9.3231   1.841  33.0356   4.76 207.0  3.556580   10
   22.9   22.7   9.3064   1.801  33.0390   4.64 201.9  3.555460   20
   24.0   23.8   9.2637   1.723  33.0492   4.57 198.8  3.552670   11
   25.0   24.8   9.2167   1.522  33.0597   4.53 197.1  3.549517    9
   26.0   25.8   9.1696   1.281  33.0720   4.50 195.9  3.546541   13
   27.0   26.8   9.1375   1.124  33.0816   4.46 194.1  3.544633   15
   28.0   27.7   9.1088   1.089  33.0900   4.43 193.0  3.542914   11
   28.8   28.5   9.0828   1.309  33.0952   4.43 192.8  3.541125    7
   30.1   29.9   9.0485   1.264  33.1015   4.40 191.4  3.538722    8
   31.0   30.7   9.0354   1.195  33.1059   4.40 191.4  3.538004   10
   32.0   31.8   9.0333   1.300  33.1083   4.40 191.4  3.538100   13
   33.0   32.7   9.0310   1.306  33.1105   4.39 191.1  3.538152   24
   34.0   33.7   9.0276   1.267  33.1119   4.36 189.9  3.538018   19
   35.0   34.7   9.0224   1.185  33.1138   4.33 188.4  3.537778   15
   36.0   35.7   8.9912   1.215  33.1242   4.27 185.9  3.536038   15
   37.0   36.7   8.9603   1.130  33.1345   4.22 183.5  3.534300   18
   37.9   37.5   8.9363   1.402  33.1418   4.20 182.8  3.532889   21
   38.9   38.6   8.8998   1.155  33.1507   4.12 179.3  3.530522   20
   40.0   39.6   8.8015   1.132  33.1786   4.05 176.3  3.523859   10
   41.0   40.7   8.7406   0.852  33.1989   3.99 173.6  3.520977   10
   42.0   41.7   8.6517   0.811  33.2282   3.93 171.2  3.515861   13
   43.0   42.7   8.5704   0.824  33.2508   3.87 168.2  3.510781   25
   44.0   43.6   8.5159   0.870  33.2865   3.81 165.8  3.509334   13
   45.0   44.6   8.4788   0.851  33.3262   3.81 165.7  3.509817   12
   46.0   45.6   8.4872   1.141  33.3472   3.82 166.1  3.512605   16
   47.0   46.6   8.4883   1.155  33.3517   3.82 166.4  3.513167   27
   48.0   47.6   8.4959   1.081  33.3567   3.84 166.9  3.514372   22
   49.0   48.6   8.5087   1.333  33.3659   3.85 167.7  3.516444   36
   49.9   49.5   8.5105   1.228  33.3727   3.84 167.1  3.517287   20
   51.0   50.6   8.4604   1.245  33.4294   3.79 165.0  3.518207   14
   52.0   51.6   8.3779   0.686  33.4854   3.74 162.8  3.516140   16
   53.0   52.6   8.3593   0.609  33.5116   3.69 160.5  3.516979   24
   54.0   53.5   8.3381   0.593  33.5259   3.64 158.3  3.516470   25
   55.0   54.6   8.3172   0.595  33.5336   3.60 156.8  3.515366   34
   55.9   55.4   8.3037   0.625  33.5427   3.59 156.2  3.515043   22
   57.0   56.5   8.2820   0.588  33.5479   3.56 154.8  3.513724   15
   58.0   57.5   8.2392   0.498  33.5564   3.50 152.1  3.510634   18
   59.0   58.5   8.2112   0.514  33.5615   3.45 150.1  3.508627   18
   60.0   59.5   8.1974   0.492  33.5654   3.42 148.8  3.507806   21
   61.1   60.5   8.1775   0.564  33.5685   3.38 147.1  3.506350   20
   62.0   61.5   8.1634   0.526  33.5696   3.35 145.8  3.505240   17
   63.0   62.5   8.1560   0.572  33.5706   3.33 145.0  3.504696   17
   64.0   63.5   8.1537   0.556  33.5712   3.32 144.6  3.504602   22
   65.0   64.4   8.1521   0.536  33.5720   3.31 144.1  3.504578   15
   66.0   65.4   8.1520   0.515  33.5731   3.29 143.2  3.504709   16
   66.8   66.2   8.1150   0.484  33.5821   3.26 141.8  3.502239   16