*2018/10/30 15:44:19.70
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2018/07/21 22:06:59.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 60
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : B4516FCA
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.387          59.824
       2 Depth                      metres          1.356          59.315
       3 Temperature:Primary        'deg C (ITS90)' 10.3606        14.8511
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.326          2.415
       5 Salinity:T0:C0             PSS-78          28.2024        30.4844
       6 Oxygen:Dissolved:SBE       mL/L            3.273          5.882
       7 Oxygen:Dissolved:SBE       umol/kg         142.7806       257.2463
       8 Conductivity:Primary       S/m             3.378083       3.523215
       9 Number_of_bin_records      n/a             3              18
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '       10  F       ' '     6
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        P:\Cruise_Data_Processing\2018-037\Processing\derive\2018-037-0083.cnv
    $END

*ADMINISTRATION
    MISSION             : 2018-037
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : CBE2
    EVENT NUMBER        : 83
    LATITUDE            :  48  44.21600 N  ! (deg min)
    LONGITUDE           : 123  34.46100 W  ! (deg min)
    WATER DEPTH         : 59

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2968
        Conductivity                       ' '             2173
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             0766
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SoftwareVersion>1.0</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/10/26 13:07:45      4519      4519
        CLEAN    5.2.3  2018/10/26 15:38:29      4519      4519
        CLIP     1.3    2018/10/26 15:38:41      4519      2620
        SHIFTDAT 3.4    2018/10/26 15:38:58      2620      2620
        DELETE   6.3    2018/10/26 15:39:09      2620      1025
        CTDEDIT  5.2.3  2018/10/29 11:26:10      1025       987
        CALIB    11.9   2018/10/30 12:17:34       987       987
        FILTERS  4.3    2018/10/30 12:18:58       987       987
        BINAVE   4.2    2018/10/30 12:19:04       987        60
        REMOVECH 8.2    2018/10/30 12:19:19        60        60
        CHGUNITS 3.1.1  2018/10/30 12:19:30        60        60
        REORDER  1.3.1  2018/10/30 15:43:05 ?         ?
        HDREDIT2 3.1.1  2018/10/30 15:44:19 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2018/10/26 15:38:18 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1900, 50000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    7
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    50.19 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2018/10/29 11:26:10
             38 records were deleted in this editing session.
              2 changes in channel Salinity:T0:C0
        -CALIB parameters: 2018/10/30 12:17:34
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1060000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    7
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2018/10/30 12:19:19
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2018/10/30 15:44:19
         Applied edit header: P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  8: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 48 44.216 N
      ** Longitude: 123 34.461 W
      ** Station: SC04
      ** Depth: 59 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2018-07-21T22:06:55</DateTime>
               <EventSummary numEvents='282'/>
               <Power>
                  <vBattery>16.2</vBattery>
                  <vExternal>0.4</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>58.6</iSys>
                  <iCPU>14.9</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>23592960</Bytes>
                  <BytesFree>1953693696</BytesFree>
                  <Samples>327680</Samples>
                  <SamplesFree>27134634</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>2968</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>2173</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>0766</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='282'/>
               <Event type='Console Suppress' count='16'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2018-07-21T22:06:59</startTime>
            <Data>
    # nquan = 11
    # nvalues = 4519
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       4519
    # span 1 =     -0.033,     60.186
    # span 2 =     -0.032,     59.667
    # span 3 =    10.3580,    19.0350
    # span 4 =    -0.4030,    64.5970
    # span 5 =     1.6603,     3.0838
    # span 6 =   0.056545,   3.610578
    # span 7 =     -1.265,      1.230
    # span 8 =     0.3400,    30.4862
    # span 9 =     3.0855,     7.4286
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Jul 21 2018 22:06:59 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2968</SerialNumber>
    #       <CalibrationDate>22-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.30535958e-003</G>
    #       <H>6.39798216e-004</H>
    #       <I>2.19306163e-005</I>
    #       <J>1.97019170e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2173</SerialNumber>
    #       <CalibrationDate>23-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01676051e+001</G>
    #         <H>1.39410479e+000</H>
    #         <I>-2.69269723e-003</I>
    #         <J>2.58106152e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0766</SerialNumber>
    #       <CalibrationDate>01-Mar-17</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3201e-001</Soc>
    #         <offset>-0.5240</offset>
    #         <A>-4.4417e-003</A>
    #         <B> 2.5497e-004</B>
    #         <C>-3.9030e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 25 2018 14:21:06, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2018-037\RAW\CTD\CTD Data\2018-037-0083.
    xml P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Oct 26 2018 12:44:02, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2018-037\Processing\convert\2018-037-0
    083.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 35
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Oct 26 2018 13:04:45, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2018-037\Processing\wildedit\2018-037-
    0083.cnv
    # alignctd_adv = sbeox0V 4.000
    # celltm_date = Oct 26 2018 13:05:29, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2018-037\Processing\align\2018-037-0083.
    cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Oct 26 2018 13:06:11, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2018-037\Processing\celltm\2018-037-0083
    .cnv P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove a few records corrupted by shed wakes near
     the top and bottom of the cast; salinity was cleaned very lightly.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Conductivity and Fluorescence:URU:Wetlabs are nominal and unedited except that some
    records were removed in editing temperature and salinity.

    Salinity samples were taken at the bottom of a few CTD casts and during 3 hydro casts
    with 8 bottles each. There are CTD data collected before 2 of the hydro casts. The CTD
    was found to be higher than bottle samples by approximately 0.007psu but incomplete
    flushing of Niskin bottles is likely so the CTD salinity may be closer to, or even lower
    than, in situ conditions. The accuracy of the CTD salinity is likely within +/-0.005psu.
    No recalibration was applied.

    There was dissolved oxygen sampling for this cruise, but there was too much scatter
    in the comparison with CTD DO and too few samples to enable a justifiable method for
    excluding outliers. Many samples were flagged 3 by the analyst and the range of DO
    was limited. The comparison suggested a correction of between 4% and 11%. There was an
    earlier cruise with a comparison to a CTD911+ cast that suggested that the CTD DO
    should be increased by 6%. While that comparison was also of limited quality, it looks
    more reliable, so the 6% correction was applied.

    Warning: While the CTD fluorescence data are expressed in concentration units, they
    do not always compare well to extracted chlorophyll samples.

    For details on the processing see document: 2018-037_Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.06)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- ----8---- -9--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0   :      n:    ity:      er_o
!              Primary  URU:             Dissol Disso Primary   ~bin
!                       Wetlabs          ved:   lved:           _rec
!                                        SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ----- --------- ----
*END OF HEADER
    1.4    1.4  14.8511   1.315  28.2024   5.88 257.2  3.523215    3
    2.0    2.0  14.1574   1.776  28.3542   5.79 253.3  3.483841   14
    3.0    3.0  13.6969   2.415  28.4616   5.65 246.8  3.458183   15
    4.0    4.0  13.3588   2.233  28.5389   5.49 239.9  3.439169   15
    5.0    5.0  13.3119   2.003  28.5462   5.34 233.2  3.436187   15
    6.0    5.9  13.1618   1.981  28.5872   5.17 226.1  3.428460   15
    7.0    6.9  13.0191   1.475  28.6660   5.00 218.4  3.425405   15
    8.0    7.9  12.8759   1.525  28.7372   4.89 213.6  3.421435   15
    9.0    8.9  12.6704   1.619  28.8158   4.85 212.0  3.413134   15
   10.0    9.9  12.5062   1.552  28.8755   4.84 211.4  3.406147   15
   11.0   10.9  12.4775   1.337  28.8978   4.76 208.1  3.406207   16
   12.0   11.9  12.4607   1.248  28.9131   4.65 203.2  3.406507   18
   13.0   12.9  12.3458   1.153  28.9604   4.60 200.9  3.402183   16
   14.0   13.9  12.2257   1.077  29.0173   4.57 199.6  3.398410   18
   15.0   14.9  12.1889   0.923  29.0382   4.53 197.7  3.397646   17
   16.0   15.8  12.1526   0.894  29.0581   4.50 196.7  3.396816   17
   17.0   16.8  12.0895   0.944  29.0897   4.50 196.4  3.395012   18
   18.0   17.8  12.0753   0.877  29.0973   4.46 195.0  3.394698   17
   19.0   18.9  12.0448   0.927  29.1142   4.45 194.3  3.394022   17
   20.0   19.9  12.0330   0.865  29.1212   4.41 192.6  3.393823   17
   21.0   20.8  12.0136   0.923  29.1318   4.35 189.9  3.393389   16
   22.0   21.8  11.9819   0.809  29.1465   4.24 185.4  3.392375   17
   23.0   22.8  11.9212   0.728  29.1739   4.14 180.9  3.390304   17
   24.0   23.8  11.7826   0.705  29.2407   4.08 178.2  3.385966   17
   25.0   24.8  11.6218   0.589  29.3249   4.04 176.3  3.381577   17
   26.0   25.8  11.5350   0.518  29.3810   4.00 174.7  3.380314   17
   27.0   26.8  11.4759   0.519  29.4235   3.98 173.8  3.379901   18
   28.0   27.8  11.4087   0.490  29.4673   3.98 173.9  3.378935   16
   29.0   28.7  11.3990   0.455  29.4769   3.99 174.3  3.379170   17
   30.0   29.8  11.3991   0.558  29.4780   3.99 174.4  3.379338   17
   31.0   30.8  11.4036   0.491  29.4755   3.98 173.7  3.379491   17
   32.0   31.7  11.4068   0.537  29.4738   3.95 172.6  3.379609   17
   33.0   32.7  11.3765   0.515  29.4947   3.94 171.9  3.379307   14
   34.0   33.7  11.3508   0.445  29.5107   3.94 171.8  3.378889   16
   35.0   34.7  11.3353   0.434  29.5220   3.92 171.2  3.378879   12
   36.0   35.7  11.3181   0.497  29.5309   3.87 169.1  3.378365   17
   37.0   36.7  11.3105   0.429  29.5371   3.81 166.5  3.378408   17
   38.0   37.7  11.2546   0.425  29.5783   3.74 163.5  3.378083   17
   39.0   38.6  11.0736   0.407  29.7218   3.72 162.6  3.380404    9
   40.0   39.6  10.9403   0.352  29.8657   3.76 164.0  3.381621   16
   41.0   40.6  10.9244   0.388  29.8850   3.79 165.6  3.382318   18
   42.0   41.6  10.9320   0.375  29.9194   3.80 165.8  3.386502   17
   43.0   42.6  10.9172   0.365  29.9778   3.78 165.1  3.391262   18
   44.0   43.6  10.8886   0.381  30.0132   3.76 164.0  3.392529   17
   45.0   44.6  10.8643   0.390  30.0317   3.71 162.1  3.392434   17
   46.0   45.6  10.8420   0.366  30.0507   3.68 160.6  3.392557   17
   47.0   46.6  10.8240   0.365  30.0693   3.65 159.2  3.392974   18
   48.0   47.6  10.7446   0.390  30.1422   3.64 158.8  3.393792   18
   49.0   48.6  10.7189   0.397  30.1689   3.64 159.0  3.394398   16
   50.0   49.6  10.7120   0.375  30.1764   3.64 158.7  3.394620   17
   51.0   50.5  10.7071   0.356  30.1819   3.62 157.9  3.394816   17
   52.0   51.6  10.6919   0.423  30.1915   3.61 157.4  3.394556   18
   53.0   52.5  10.6728   0.382  30.2166   3.59 156.6  3.395545   17
   54.0   53.5  10.6664   0.369  30.2325   3.55 154.9  3.396657   18
   55.0   54.5  10.6315   0.336  30.2674   3.48 152.0  3.397312   16
   56.0   55.5  10.6016   0.389  30.2966   3.40 148.5  3.397799   18
   57.0   56.5  10.4944   0.387  30.3944   3.32 144.8  3.398716   17
   58.0   57.5  10.4345   0.366  30.4362   3.28 143.1  3.397929   18
   59.0   58.5  10.3719   0.475  30.4752   3.27 142.8  3.396631   17
   59.8   59.3  10.3606   0.326  30.4844   3.28 143.2  3.396626   13