*2018/10/30 15:44:19.64
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2018/07/21 21:07:57.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 87
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : F193719D
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.326          86.918
       2 Depth                      metres          1.305          86.169
       3 Temperature:Primary        'deg C (ITS90)' 10.1482        16.4439
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.302          5.295
       5 Salinity:T0:C0             PSS-78          28.2852        31.0306
       6 Oxygen:Dissolved:SBE       mL/L            3.449          8.034
       7 Oxygen:Dissolved:SBE       umol/kg         150.3894       351.4581
       8 Conductivity:Primary       S/m             3.399595       3.662792
       9 Number_of_bin_records      n/a             7              17
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '       10  F       ' '     6
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        P:\Cruise_Data_Processing\2018-037\Processing\derive\2018-037-0079.cnv
    $END

*ADMINISTRATION
    MISSION             : 2018-037
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : SC04
    EVENT NUMBER        : 79
    LATITUDE            :  48  43.51600 N  ! (deg min)
    LONGITUDE           : 123  25.00400 W  ! (deg min)
    WATER DEPTH         : 88

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2968
        Conductivity                       ' '             2173
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             0766
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SoftwareVersion>1.0</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/10/26 13:07:44      5425      5425
        CLEAN    5.2.3  2018/10/26 15:38:28      5425      5425
        CLIP     1.3    2018/10/26 15:38:41      5425      3526
        SHIFTDAT 3.4    2018/10/26 15:38:58      3526      3526
        DELETE   6.3    2018/10/26 15:39:09      3526      1361
        CTDEDIT  5.2.3  2018/10/29 11:24:54      1361      1326
        CALIB    11.9   2018/10/30 12:17:34      1326      1326
        FILTERS  4.3    2018/10/30 12:18:57      1326      1326
        BINAVE   4.2    2018/10/30 12:19:04      1326        87
        REMOVECH 8.2    2018/10/30 12:19:19        87        87
        CHGUNITS 3.1.1  2018/10/30 12:19:30        87        87
        REORDER  1.3.1  2018/10/30 15:43:05 ?         ?
        HDREDIT2 3.1.1  2018/10/30 15:44:19 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2018/10/26 15:38:18 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1900, 50000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    7
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    77.29 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2018/10/29 11:24:54
             35 records were deleted in this editing session.
             27 changes in channel Salinity:T0:C0
        -CALIB parameters: 2018/10/30 12:17:34
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1060000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    7
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2018/10/30 12:19:19
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2018/10/30 15:44:19
         Applied edit header: P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  8: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 48 43.516 N
      ** Longitude: 123 25.004 W
      ** Station: SC04
      ** Depth: 88 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2018-07-21T21:07:53</DateTime>
               <EventSummary numEvents='282'/>
               <Power>
                  <vBattery>16.5</vBattery>
                  <vExternal>0.4</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>58.6</iSys>
                  <iCPU>11.2</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>23134208</Bytes>
                  <BytesFree>1954152448</BytesFree>
                  <Samples>321308</Samples>
                  <SamplesFree>27141006</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>2968</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>2173</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>0766</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='282'/>
               <Event type='Console Suppress' count='16'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2018-07-21T21:07:57</startTime>
            <Data>
    # nquan = 11
    # nvalues = 5425
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       5390
    # span 1 =     -0.029,     87.285
    # span 2 =     -0.029,     86.526
    # span 3 =    10.1356,    18.2519
    # span 4 =    -0.4030,    64.5970
    # span 5 =     1.7052,     3.8476
    # span 6 =   0.018496,   3.701050
    # span 7 =     -1.162,      1.146
    # span 8 =     0.1060,    31.0463
    # span 9 =     2.4419,     8.1435
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Jul 21 2018 21:07:57 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2968</SerialNumber>
    #       <CalibrationDate>22-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.30535958e-003</G>
    #       <H>6.39798216e-004</H>
    #       <I>2.19306163e-005</I>
    #       <J>1.97019170e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2173</SerialNumber>
    #       <CalibrationDate>23-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01676051e+001</G>
    #         <H>1.39410479e+000</H>
    #         <I>-2.69269723e-003</I>
    #         <J>2.58106152e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0766</SerialNumber>
    #       <CalibrationDate>01-Mar-17</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3201e-001</Soc>
    #         <offset>-0.5240</offset>
    #         <A>-4.4417e-003</A>
    #         <B> 2.5497e-004</B>
    #         <C>-3.9030e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 25 2018 14:21:05, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2018-037\RAW\CTD\CTD Data\2018-037-0079.
    xml P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Oct 26 2018 12:44:02, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2018-037\Processing\convert\2018-037-0
    079.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 35
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Oct 26 2018 13:04:44, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2018-037\Processing\wildedit\2018-037-
    0079.cnv
    # alignctd_adv = sbeox0V 4.000
    # celltm_date = Oct 26 2018 13:05:28, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2018-037\Processing\align\2018-037-0079.
    cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Oct 26 2018 13:06:10, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2018-037\Processing\celltm\2018-037-0079
    .cnv P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove a few records corrupted by shed wakes near
     the top and bottom of the cast; salinity was cleaned lightly.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Conductivity and Fluorescence:URU:Wetlabs are nominal and unedited except that some
    records were removed in editing temperature and salinity.

    Salinity samples were taken at the bottom of a few CTD casts and during 3 hydro casts
    with 8 bottles each. There are CTD data collected before 2 of the hydro casts. The CTD
    was found to be higher than bottle samples by approximately 0.007psu but incomplete
    flushing of Niskin bottles is likely so the CTD salinity may be closer to, or even lower
    than, in situ conditions. The accuracy of the CTD salinity is likely within +/-0.005psu.
    No recalibration was applied.

    There was dissolved oxygen sampling for this cruise, but there was too much scatter
    in the comparison with CTD DO and too few samples to enable a justifiable method for
    excluding outliers. Many samples were flagged 3 by the analyst and the range of DO
    was limited. The comparison suggested a correction of between 4% and 11%. There was an
    earlier cruise with a comparison to a CTD911+ cast that suggested that the CTD DO
    should be increased by 6%. While that comparison was also of limited quality, it looks
    more reliable, so the 6% correction was applied.

    Warning: While the CTD fluorescence data are expressed in concentration units, they
    do not always compare well to extracted chlorophyll samples.

    For details on the processing see document: 2018-037_Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.06)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- ----8---- -9--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0   :      n:    ity:      er_o
!              Primary  URU:             Dissol Disso Primary   ~bin
!                       Wetlabs          ved:   lved:           _rec
!                                        SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ----- --------- ----
*END OF HEADER
    1.3    1.3  16.4439   4.302  28.2852   8.03 351.5  3.662792    7
    2.0    2.0  15.6771   4.699  28.3158   7.98 348.9  3.597607   15
    3.0    3.0  15.3983   4.763  28.3156   7.76 339.6  3.580248   16
    4.0    4.0  15.2699   5.246  28.3255   7.53 329.2  3.571422   14
    5.0    4.9  15.1018   5.295  28.3459   7.34 320.8  3.560106   14
    6.0    5.9  14.8379   5.234  28.3743   7.13 311.9  3.541657   15
    7.0    6.9  14.6877   4.474  28.4137   6.93 303.1  3.534200   15
    8.0    7.9  14.4792   3.686  28.4649   6.79 296.8  3.522492   15
    9.0    8.9  14.3341   3.184  28.4860   6.71 293.4  3.513070   15
   10.0    9.9  14.1901   3.628  28.5148   6.54 285.9  3.504543   16
   11.0   10.9  14.1487   3.429  28.5339   6.14 268.4  3.503307   15
   12.0   11.9  14.1161   3.346  28.5468   5.75 251.2  3.502110   16
   13.0   12.9  13.6871   2.698  28.6635   5.58 243.7  3.479683   16
   14.0   13.9  13.2356   2.005  28.7629   5.50 240.2  3.453819   16
   15.0   14.9  13.1863   1.654  28.7693   5.33 232.8  3.450513   16
   16.0   15.9  13.0619   1.687  28.7987   5.22 228.2  3.443555   15
   17.0   16.9  12.8475   1.473  28.8556   5.17 225.9  3.432186   16
   18.0   17.8  12.6945   1.637  28.8913   5.17 225.9  3.423524   16
   19.0   18.8  12.5666   1.526  28.9083   5.21 227.6  3.414929   15
   20.0   19.8  12.5668   1.456  28.9084   5.18 226.5  3.414989   16
   21.0   20.8  12.5671   1.758  28.9101   5.07 221.6  3.415240   16
   22.0   21.8  12.5708   1.388  28.9102   4.93 215.4  3.415584   15
   23.0   22.8  12.5314   1.477  28.9406   4.79 209.4  3.415645   16
   24.0   23.8  12.3631   1.393  29.0313   4.67 204.0  3.411537   15
   25.0   24.8  12.1833   1.176  29.1078   4.62 201.6  3.404924   16
   26.0   25.8  11.9936   1.156  29.2358   4.60 200.7  3.402869   15
   27.0   26.8  11.9236   1.091  29.2902   4.59 200.6  3.402859   15
   28.0   27.8  11.8920   1.092  29.3129   4.60 200.9  3.402682   15
   29.0   28.8  11.8805   1.028  29.3208   4.58 200.0  3.402597   16
   30.0   29.8  11.8608   0.979  29.3349   4.53 197.8  3.402494   16
   31.0   30.8  11.8278   1.000  29.3553   4.46 194.6  3.401951   15
   32.0   31.7  11.7405   1.079  29.4373   4.40 192.0  3.403347   14
   33.0   32.7  11.6468   1.101  29.5254   4.36 190.2  3.404816   16
   34.0   33.7  11.5708   0.940  29.5826   4.31 188.1  3.404513   15
   35.0   34.7  11.5457   0.853  29.5946   4.22 184.1  3.403727   16
   36.0   35.7  11.5062   0.768  29.6140   4.13 180.5  3.402503   16
   37.0   36.7  11.3909   0.648  29.6830   4.09 178.7  3.400125   15
   38.0   37.7  11.2959   0.659  29.7521   4.10 178.8  3.399595   13
   39.0   38.7  11.2347   0.567  29.8031   4.10 179.1  3.399631   15
   40.0   39.7  11.2358   0.690  29.8278   4.08 178.0  3.402182   13
   41.0   40.6  11.1963   0.627  29.9016   4.05 176.6  3.406648   16
   42.0   41.6  11.1218   0.652  29.9853   4.02 175.5  3.409062   16
   43.0   42.6  11.0895   0.688  30.0191   4.01 175.1  3.409861   17
   44.0   43.6  11.0537   0.616  30.0559   4.01 175.1  3.410686   15
   45.0   44.6  11.0360   0.578  30.0747   4.01 175.1  3.411170   15
   46.0   45.6  11.0376   0.588  30.0730   4.00 174.6  3.411174   15
   47.0   46.6  11.0309   0.600  30.0815   3.98 173.5  3.411524   16
   48.0   47.6  11.0262   0.573  30.0867   3.96 172.6  3.411701   15
   49.0   48.6  11.0063   0.492  30.1069   3.95 172.3  3.412116   12
   50.0   49.6  10.9838   0.557  30.1275   3.95 172.4  3.412399   15
   51.0   50.6  10.9845   0.575  30.1272   3.95 172.2  3.412460   15
   52.0   51.5  10.9793   0.521  30.1325   3.93 171.7  3.412610   14
   53.0   52.5  10.9777   0.554  30.1343   3.91 170.5  3.412700   16
   54.0   53.6  10.9616   0.561  30.1488   3.87 169.0  3.412885   14
   55.0   54.5  10.9259   0.509  30.1792   3.86 168.4  3.413027   15
   56.0   55.5  10.8682   0.522  30.2371   3.86 168.3  3.414124   15
   57.0   56.5  10.8476   0.539  30.2630   3.85 168.0  3.415073   14
   58.0   57.5  10.8367   0.417  30.2771   3.85 167.9  3.415633   15
   59.0   58.5  10.8331   0.459  30.2819   3.83 167.3  3.415868   16
   60.0   59.5  10.8214   0.538  30.2938   3.82 166.6  3.416124   15
   61.0   60.5  10.8072   0.462  30.3082   3.80 166.0  3.416445   15
   62.0   61.5  10.7966   0.426  30.3165   3.77 164.6  3.416432   15
   63.0   62.5  10.7784   0.442  30.3296   3.73 162.9  3.416269   14
   64.0   63.4  10.7178   0.456  30.3935   3.68 160.6  3.417695   15
   65.0   64.4  10.6657   0.453  30.4484   3.64 158.9  3.418914   16
   66.0   65.4  10.5935   0.431  30.5251   3.63 158.2  3.420621   15
   67.0   66.4  10.5235   0.413  30.6003   3.61 157.6  3.422343   15
   68.0   67.4  10.4765   0.503  30.6529   3.60 157.2  3.423701   15
   69.0   68.4  10.4497   0.384  30.6817   3.59 156.7  3.424376   15
   70.0   69.4  10.4237   0.398  30.7089   3.57 155.7  3.424941   15
   71.0   70.4  10.3966   0.382  30.7385   3.56 155.1  3.425661   15
   72.0   71.4  10.3717   0.362  30.7645   3.54 154.4  3.426209   15
   73.0   72.4  10.3391   0.348  30.7991   3.52 153.6  3.426949   15
   74.0   73.4  10.3126   0.334  30.8307   3.51 153.3  3.427912   15
   75.0   74.4  10.2947   0.379  30.8510   3.49 152.3  3.428463   15
   76.0   75.3  10.2694   0.389  30.8786   3.47 151.3  3.429115   15
   77.0   76.3  10.2092   0.357  30.9472   3.47 151.2  3.431109   12
   78.0   77.3  10.1979   0.334  30.9645   3.49 152.0  3.431696   16
   79.0   78.3  10.1992   0.369  30.9643   3.49 152.1  3.431831   15
   80.0   79.3  10.1986   0.362  30.9663   3.48 151.9  3.432014   16
   81.0   80.3  10.2003   0.345  30.9651   3.48 151.9  3.432082   15
   82.0   81.3  10.2007   0.302  30.9649   3.48 151.7  3.432149   15
   83.0   82.3  10.1935   0.344  30.9762   3.48 151.7  3.432696   15
   84.0   83.3  10.1882   0.317  30.9836   3.47 151.5  3.433027   16
   85.0   84.3  10.1839   0.338  30.9897   3.46 151.1  3.433315   16
   86.0   85.3  10.1689   0.328  31.0072   3.46 150.7  3.433820   16
   86.9   86.2  10.1482   0.333  31.0306   3.45 150.4  3.434433   14