*2018/10/30 15:44:19.59
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2018/07/21 20:26:47.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 59
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 87808F5B
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.169          58.568
       2 Depth                      metres          1.153          58.066
       3 Temperature:Primary        'deg C (ITS90)' 10.7369        13.1098
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.418          1.404
       5 Salinity:T0:C0             PSS-78          28.2852        30.3826
       6 Oxygen:Dissolved:SBE       mL/L            3.843          4.851
       7 Oxygen:Dissolved:SBE       umol/kg         167.6682       212.0714
       8 Conductivity:Primary       S/m             3.374169       3.418094
       9 Number_of_bin_records      n/a             6              24
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '       10  F       ' '     6
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        P:\Cruise_Data_Processing\2018-037\Processing\derive\2018-037-0077.cnv
    $END

*ADMINISTRATION
    MISSION             : 2018-037
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : GI01
    EVENT NUMBER        : 77
    LATITUDE            :  48  45.87100 N  ! (deg min)
    LONGITUDE           : 123  20.56500 W  ! (deg min)
    WATER DEPTH         : 58

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2968
        Conductivity                       ' '             2173
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             0766
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SoftwareVersion>1.0</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/10/26 13:07:44      4294      4294
        CLEAN    5.2.3  2018/10/26 15:38:28      4294      4294
        CLIP     1.3    2018/10/26 15:38:40      4294      2395
        SHIFTDAT 3.4    2018/10/26 15:38:58      2395      2395
        DELETE   6.3    2018/10/26 15:39:09      2395       963
        CTDEDIT  5.2.3  2018/10/29 11:21:39       963       947
        CALIB    11.9   2018/10/30 12:17:34       947       947
        FILTERS  4.3    2018/10/30 12:18:57       947       947
        BINAVE   4.2    2018/10/30 12:19:04       947        59
        REMOVECH 8.2    2018/10/30 12:19:19        59        59
        CHGUNITS 3.1.1  2018/10/30 12:19:30        59        59
        REORDER  1.3.1  2018/10/30 15:43:05 ?         ?
        HDREDIT2 3.1.1  2018/10/30 15:44:19 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2018/10/26 15:38:18 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1900, 50000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    7
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    48.61 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2018/10/29 11:21:39
             16 records were deleted in this editing session.
              4 changes in channel Salinity:T0:C0
        -CALIB parameters: 2018/10/30 12:17:34
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1060000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    7
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2018/10/30 12:19:19
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2018/10/30 15:44:19
         Applied edit header: P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  8: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 48 45.871 N
      ** Longitude: 123 20.565 W
      ** Station: GI01
      ** Depth: 58 m
      **
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2018-07-21T20:26:44</DateTime>
               <EventSummary numEvents='282'/>
               <Power>
                  <vBattery>16.2</vBattery>
                  <vExternal>0.5</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>61.0</iSys>
                  <iCPU>14.6</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>22740992</Bytes>
                  <BytesFree>1954545664</BytesFree>
                  <Samples>315847</Samples>
                  <SamplesFree>27146467</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>2968</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>2173</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>0766</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='282'/>
               <Event type='Console Suppress' count='16'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2018-07-21T20:26:47</startTime>
            <Data>
    # nquan = 11
    # nvalues = 4294
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       4294
    # span 1 =     -0.040,     58.614
    # span 2 =     -0.039,     58.109
    # span 3 =    10.7353,    13.6711
    # span 4 =    -0.4030,    64.5970
    # span 5 =     1.8554,     3.1164
    # span 6 =   0.158422,   3.546894
    # span 7 =     -1.365,      1.291
    # span 8 =     1.0653,    30.3859
    # span 9 =     3.5195,     7.1453
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Jul 21 2018 20:26:47 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2968</SerialNumber>
    #       <CalibrationDate>22-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.30535958e-003</G>
    #       <H>6.39798216e-004</H>
    #       <I>2.19306163e-005</I>
    #       <J>1.97019170e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2173</SerialNumber>
    #       <CalibrationDate>23-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01676051e+001</G>
    #         <H>1.39410479e+000</H>
    #         <I>-2.69269723e-003</I>
    #         <J>2.58106152e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0766</SerialNumber>
    #       <CalibrationDate>01-Mar-17</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3201e-001</Soc>
    #         <offset>-0.5240</offset>
    #         <A>-4.4417e-003</A>
    #         <B> 2.5497e-004</B>
    #         <C>-3.9030e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 25 2018 14:21:04, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2018-037\RAW\CTD\CTD Data\2018-037-0077.
    xml P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Oct 26 2018 12:44:01, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2018-037\Processing\convert\2018-037-0
    077.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 35
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Oct 26 2018 13:04:44, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2018-037\Processing\wildedit\2018-037-
    0077.cnv
    # alignctd_adv = sbeox0V 4.000
    # celltm_date = Oct 26 2018 13:05:28, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2018-037\Processing\align\2018-037-0077.
    cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Oct 26 2018 13:06:10, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2018-037\Processing\celltm\2018-037-0077
    .cnv P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove a few records corrupted by shed wakes near
     the top; salinity was cleaned lightly.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Conductivity and Fluorescence:URU:Wetlabs are nominal and unedited except that some
    records were removed in editing temperature and salinity.

    Salinity samples were taken at the bottom of a few CTD casts and during 3 hydro casts
    with 8 bottles each. There are CTD data collected before 2 of the hydro casts. The CTD
    was found to be higher than bottle samples by approximately 0.007psu but incomplete
    flushing of Niskin bottles is likely so the CTD salinity may be closer to, or even lower
    than, in situ conditions. The accuracy of the CTD salinity is likely within +/-0.005psu.
    No recalibration was applied.

    There was dissolved oxygen sampling for this cruise, but there was too much scatter
    in the comparison with CTD DO and too few samples to enable a justifiable method for
    excluding outliers. Many samples were flagged 3 by the analyst and the range of DO
    was limited. The comparison suggested a correction of between 4% and 11%. There was an
    earlier cruise with a comparison to a CTD911+ cast that suggested that the CTD DO
    should be increased by 6%. While that comparison was also of limited quality, it looks
    more reliable, so the 6% correction was applied.

    Warning: While the CTD fluorescence data are expressed in concentration units, they
    do not always compare well to extracted chlorophyll samples.

    For details on the processing see document: 2018-037_Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.06)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- ----8---- -9--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0   :      n:    ity:      er_o
!              Primary  URU:             Dissol Disso Primary   ~bin
!                       Wetlabs          ved:   lved:           _rec
!                                        SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ----- --------- ----
*END OF HEADER
    1.2    1.2  13.1098   0.996  28.2852   4.85 212.1  3.391318   13
    2.0    2.0  12.5541   1.404  28.5484   4.74 207.2  3.374851   17
    3.0    3.0  12.4001   1.276  28.6586   4.61 201.5  3.374169   18
    4.0    4.0  12.1010   1.184  28.9149   4.59 200.4  3.377003   19
    5.0    4.9  11.9784   0.984  29.0321   4.58 200.2  3.379400   16
    6.0    5.9  11.9496   1.199  29.0525   4.58 200.0  3.379502   14
    7.0    7.0  11.9204   1.115  29.0768   4.57 199.7  3.379430   16
    8.0    7.9  11.9180   1.129  29.0797   4.55 199.0  3.379578   15
    9.0    8.9  11.9106   1.076  29.0915   4.53 198.0  3.380243   15
   10.0    9.9  11.8965   1.020  29.1061   4.50 196.4  3.380671   16
   11.0   10.9  11.8484   1.147  29.1700   4.49 196.0  3.383453   16
   12.0   11.9  11.7661   0.937  29.2989   4.49 196.0  3.390217   16
   13.0   12.9  11.7706   0.944  29.2925   4.48 195.6  3.389962   16
   14.0   13.9  11.7718   0.851  29.2896   4.48 195.5  3.389803   15
   15.0   14.9  11.7701   0.846  29.2937   4.46 195.0  3.390121   16
   16.0   15.8  11.7608   0.863  29.3085   4.43 193.6  3.390946   17
   17.0   16.8  11.7437   0.950  29.3319   4.38 191.5  3.392020   17
   18.0   17.8  11.6927   0.936  29.3935   4.34 189.5  3.394289   15
   19.0   18.8  11.6253   0.831  29.4724   4.31 188.2  3.396968   15
   20.0   19.8  11.5340   0.766  29.5790   4.31 188.2  3.400535   17
   21.0   20.8  11.4785   0.746  29.6430   4.29 187.3  3.402616   17
   22.0   21.8  11.4650   0.745  29.6563   4.27 186.6  3.402920   17
   23.0   22.8  11.4267   0.752  29.6987   4.27 186.5  3.404166   15
   24.0   23.8  11.4017   0.733  29.7239   4.27 186.5  3.404727   16
   25.0   24.8  11.4023   0.768  29.7228   4.27 186.5  3.404708   17
   26.0   25.8  11.3998   0.645  29.7279   4.26 186.1  3.405046   14
   27.0   26.8  11.3963   0.653  29.7333   4.25 185.5  3.405450   15
   28.0   27.8  11.3914   0.649  29.7387   4.24 185.0  3.405595   14
   29.0   28.8  11.3660   0.639  29.7678   4.21 183.8  3.406497   18
   30.0   29.7  11.3612   0.720  29.7735   4.16 181.6  3.406724   18
   31.0   30.7  11.3222   0.660  29.8149   4.12 179.6  3.407797   14
   32.0   31.7  11.2468   0.553  29.8895   4.08 178.3  3.409243   13
   33.0   32.7  11.1600   0.577  29.9629   4.07 177.6  3.409588   15
   34.0   33.7  11.0968   0.637  30.0171   4.06 177.2  3.409910   21
   35.0   34.7  11.0775   0.566  30.0368   4.03 175.7  3.410354   19
   36.0   35.7  11.0443   0.488  30.0648   4.00 174.5  3.410488   14
   37.0   36.7  11.0135   0.493  30.0990   3.99 174.1  3.410960   10
   38.0   37.7  10.9776   0.589  30.1260   3.98 173.8  3.411247   13
   39.0   38.7  10.9544   0.570  30.1458   3.97 173.2  3.411358   20
   40.0   39.6  10.9390   0.507  30.1604   3.97 173.1  3.411590   21
   41.0   40.6  10.9306   0.487  30.1691   3.97 173.4  3.411817   15
   42.0   41.6  10.9169   0.491  30.1820   3.97 173.3  3.412034   13
   43.0   42.6  10.9086   0.518  30.1909   3.97 173.2  3.412278   14
   44.0   43.6  10.9045   0.486  30.1931   3.95 172.5  3.412201   19
   45.0   44.6  10.8938   0.507  30.1987   3.93 171.6  3.411920   20
   46.0   45.6  10.8816   0.473  30.2126   3.89 169.8  3.412351   17
   47.0   46.6  10.8717   0.488  30.2214   3.86 168.5  3.412572   11
   48.0   47.6  10.7586   0.487  30.3556   3.86 168.4  3.416390   11
   49.0   48.6  10.7398   0.460  30.3775   3.85 168.1  3.417325   17
   50.0   49.6  10.7369   0.469  30.3811   3.86 168.3  3.417488   22
   51.0   50.5  10.7374   0.499  30.3808   3.86 168.6  3.417534   17
   52.0   51.5  10.7379   0.512  30.3803   3.85 168.1  3.417569   13
   53.0   52.5  10.7381   0.418  30.3806   3.84 167.7  3.417652   13
   54.0   53.6  10.7389   0.467  30.3803   3.85 167.8  3.417731   18
   55.0   54.5  10.7389   0.460  30.3807   3.85 167.9  3.417817   24
   56.0   55.5  10.7376   0.510  30.3826   3.85 168.1  3.417932   15
   57.0   56.5  10.7387   0.451  30.3813   3.86 168.3  3.417944   13
   58.0   57.6  10.7386   0.480  30.3817   3.86 168.2  3.418016   15
   58.6   58.1  10.7385   0.532  30.3824   3.85 168.1  3.418094    6