*2018/10/30 15:44:18.58
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2018/07/19 17:18:30.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 28
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : FA8904EB
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.3            28.004
       2 Depth                      metres          1.279          27.77
       3 Temperature:Primary        'deg C (ITS90)' 10.6354        17.4546
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.792          4.184
       5 Salinity:T0:C0             PSS-78          24.6478        28.8495
       6 Oxygen:Dissolved:SBE       mL/L            4.232          6.834
       7 Oxygen:Dissolved:SBE       umol/kg         184.8577       299.82
       8 Conductivity:Primary       S/m             3.252356       3.378902
       9 Number_of_bin_records      n/a             7              18
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '       10  F       ' '     6
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        P:\Cruise_Data_Processing\2018-037\Processing\derive\2018-037-0034.cnv
    $END

*ADMINISTRATION
    MISSION             : 2018-037
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : IS-2
    EVENT NUMBER        : 34
    LATITUDE            :  49  38.20300 N  ! (deg min)
    LONGITUDE           : 124   4.99600 W  ! (deg min)
    WATER DEPTH         : 27

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2968
        Conductivity                       ' '             2173
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             0766
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SoftwareVersion>1.0</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/10/26 13:07:35      3365      3365
        CLEAN    5.2.3  2018/10/26 15:38:22      3365      3365
        CLIP     1.3    2018/10/26 15:38:35      3365      1466
        SHIFTDAT 3.4    2018/10/26 15:38:53      1466      1466
        DELETE   6.3    2018/10/26 15:39:05      1466       488
        CTDEDIT  5.2.3  2018/10/29 08:59:10       488       454
        CALIB    11.9   2018/10/30 12:17:31       454       454
        FILTERS  4.3    2018/10/30 12:18:55       454       454
        BINAVE   4.2    2018/10/30 12:19:02       454        28
        REMOVECH 8.2    2018/10/30 12:19:18        28        28
        CHGUNITS 3.1.1  2018/10/30 12:19:29        28        28
        REORDER  1.3.1  2018/10/30 15:43:04 ?         ?
        HDREDIT2 3.1.1  2018/10/30 15:44:18 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2018/10/26 15:38:18 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1900, 50000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    7
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    18.44 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2018/10/29 08:59:10
             34 records were deleted in this editing session.
         No data values were changed.
        -CALIB parameters: 2018/10/30 12:17:31
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1060000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    7
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2018/10/30 12:19:18
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2018/10/30 15:44:18
         Applied edit header: P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  8: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 49 38.203 N
      ** Longitude: 124 04.996 W
      ** Station: IS-2
      ** Depth: 27 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2018-07-19T17:18:27</DateTime>
               <EventSummary numEvents='282'/>
               <Power>
                  <vBattery>16.5</vBattery>
                  <vExternal>0.5</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>58.6</iSys>
                  <iCPU>14.4</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>10387456</Bytes>
                  <BytesFree>1966899200</BytesFree>
                  <Samples>144270</Samples>
                  <SamplesFree>27318044</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>2968</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>2173</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>0766</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='282'/>
               <Event type='Console Suppress' count='16'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2018-07-19T17:18:30</startTime>
            <Data>
    # nquan = 11
    # nvalues = 3365
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       3365
    # span 1 =     -0.038,     28.438
    # span 2 =     -0.038,     28.195
    # span 3 =    10.5515,    17.4596
    # span 4 =    -0.4030,    63.0844
    # span 5 =     1.9847,     3.1736
    # span 6 =   3.251425,   3.382977
    # span 7 =     -1.240,      1.230
    # span 8 =    24.6349,    28.9044
    # span 9 =     3.9844,     6.6440
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Jul 19 2018 17:18:30 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2968</SerialNumber>
    #       <CalibrationDate>22-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.30535958e-003</G>
    #       <H>6.39798216e-004</H>
    #       <I>2.19306163e-005</I>
    #       <J>1.97019170e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2173</SerialNumber>
    #       <CalibrationDate>23-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01676051e+001</G>
    #         <H>1.39410479e+000</H>
    #         <I>-2.69269723e-003</I>
    #         <J>2.58106152e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0766</SerialNumber>
    #       <CalibrationDate>01-Mar-17</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3201e-001</Soc>
    #         <offset>-0.5240</offset>
    #         <A>-4.4417e-003</A>
    #         <B> 2.5497e-004</B>
    #         <C>-3.9030e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 25 2018 14:20:44, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2018-037\RAW\CTD\CTD Data\2018-037-0034.
    xml P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Oct 26 2018 12:43:50, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2018-037\Processing\convert\2018-037-0
    034.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 35
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Oct 26 2018 13:04:32, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2018-037\Processing\wildedit\2018-037-
    0034.cnv
    # alignctd_adv = sbeox0V 4.000
    # celltm_date = Oct 26 2018 13:05:18, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2018-037\Processing\align\2018-037-0034.
    cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Oct 26 2018 13:05:59, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2018-037\Processing\celltm\2018-037-0034
    .cnv P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove records corrupted by shed wakes near the top
     and bottom of the cast.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Conductivity and Fluorescence:URU:Wetlabs are nominal and unedited except that some
    records were removed in editing temperature and salinity.

    Salinity samples were taken at the bottom of a few CTD casts and during 3 hydro casts
    with 8 bottles each. There are CTD data collected before 2 of the hydro casts. The CTD
    was found to be higher than bottle samples by approximately 0.007psu but incomplete
    flushing of Niskin bottles is likely so the CTD salinity may be closer to, or even lower
    than, in situ conditions. The accuracy of the CTD salinity is likely within +/-0.005psu.
    No recalibration was applied.

    There was dissolved oxygen sampling for this cruise, but there was too much scatter
    in the comparison with CTD DO and too few samples to enable a justifiable method for
    excluding outliers. Many samples were flagged 3 by the analyst and the range of DO
    was limited. The comparison suggested a correction of between 4% and 11%. There was an
    earlier cruise with a comparison to a CTD911+ cast that suggested that the CTD DO
    should be increased by 6%. While that comparison was also of limited quality, it looks
    more reliable, so the 6% correction was applied.

    Warning: While the CTD fluorescence data are expressed in concentration units, they
    do not always compare well to extracted chlorophyll samples.

    For details on the processing see document: 2018-037_Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.06)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- ----8---- -9--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0   :      n:    ity:      er_o
!              Primary  URU:             Dissol Disso Primary   ~bin
!                       Wetlabs          ved:   lved:           _rec
!                                        SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ----- --------- ----
*END OF HEADER
    1.3    1.3  17.4459   1.571  24.6528   6.82 299.2  3.309004    7
    2.0    2.0  17.4464   1.509  24.6528   6.78 297.4  3.309074   15
    3.0    3.0  17.4546   1.537  24.6532   6.75 296.2  3.309750   15
    4.0    4.0  17.4407   1.534  24.6478   6.80 298.4  3.308114   17
    5.0    4.9  17.2934   1.620  24.7157   6.83 299.8  3.305504   16
    6.0    5.9  16.8799   2.532  25.2009   6.82 299.1  3.333242   16
    7.0    6.9  16.5999   2.988  25.5347   6.68 293.0  3.352010   18
    8.0    7.9  16.3152   3.539  25.8129   6.49 284.4  3.363410   17
    9.0    8.9  16.0099   3.458  26.0811   6.25 273.7  3.371605   16
   10.0    9.9  15.6606   3.620  26.3601   5.93 259.9  3.377173   16
   11.0   10.9  14.8534   4.005  26.9219   5.57 244.0  3.378902   17
   12.0   11.9  13.9248   4.184  27.4663   5.22 228.6  3.367110   18
   13.0   12.9  13.2386   3.904  27.7552   5.03 220.0  3.344511   16
   14.0   13.9  12.6329   3.320  28.0056   4.93 215.5  3.323575   16
   15.0   14.9  12.1285   2.797  28.1320   4.76 208.3  3.296948   17
   16.0   15.9  11.8783   2.430  28.2099   4.53 197.9  3.285314   18
   17.0   16.8  11.6227   2.091  28.3182   4.38 191.6  3.276329   15
   18.0   17.8  11.1123   1.599  28.5598   4.35 190.1  3.260707   16
   19.0   18.8  10.8999   1.141  28.6734   4.33 189.4  3.254554   13
   20.0   19.8  10.8137   0.919  28.7103   4.34 189.6  3.252356   17
   21.0   20.8  10.7979   0.919  28.7230   4.33 189.0  3.252426   17
   22.0   21.8  10.7763   0.915  28.7399   4.31 188.2  3.252464   16
   23.0   22.8  10.7603   0.871  28.7539   4.29 187.4  3.252643   17
   24.0   23.8  10.7375   0.893  28.7755   4.27 186.4  3.253061   16
   25.0   24.8  10.7059   0.838  28.7987   4.26 186.0  3.252940   17
   26.0   25.8  10.6856   0.792  28.8141   4.25 185.8  3.252912   17
   27.0   26.8  10.6804   0.813  28.8197   4.23 184.9  3.253106   16
   28.0   27.8  10.6354   0.803  28.8495   4.23 184.9  3.252562   18