*2018/10/30 15:44:17.80
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2018/07/18 14:30:44.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 58
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 49BF1CFE
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.317          57.576
       2 Depth                      metres          1.306          57.091
       3 Temperature:Primary        'deg C (ITS90)' 10.7795        17.695
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.67           5.503
       5 Salinity:T0:C0             PSS-78          27.1723        29.0001
       6 Oxygen:Dissolved:SBE       mL/L            4.097          7.107
       7 Oxygen:Dissolved:SBE       umol/kg         178.9414       311.251
       8 Conductivity:Primary       S/m             3.28071        3.632984
       9 Number_of_bin_records      n/a             4              26
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '       10  F       ' '     6
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file:
        P:\Cruise_Data_Processing\2018-037\Processing\derive\2018-037-0007.cnv
    $END

*ADMINISTRATION
    MISSION             : 2018-037
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : BS11
    EVENT NUMBER        : 7
    LATITUDE            :  49  29.09900 N  ! (deg min)
    LONGITUDE           : 124  46.04800 W  ! (deg min)
    WATER DEPTH         : 57

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 0251123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2968
        Conductivity                       ' '             2173
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             0766
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SoftwareVersion>1.0</SoftwareVersion>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/10/26 13:07:29      4564      4564
        CLEAN    5.2.3  2018/10/26 15:38:18      4564      4564
        CLIP     1.3    2018/10/26 15:38:32      4564      2665
        SHIFTDAT 3.4    2018/10/26 15:38:51      2665      2665
        DELETE   6.3    2018/10/26 15:39:02      2665      1009
        CTDEDIT  5.2.3  2018/10/26 16:26:07      1009       979
        CALIB    11.9   2018/10/30 12:17:29       979       979
        FILTERS  4.3    2018/10/30 12:18:53       979       979
        BINAVE   4.2    2018/10/30 12:19:01       979        58
        REMOVECH 8.2    2018/10/30 12:19:18        58        58
        CHGUNITS 3.1.1  2018/10/30 12:19:29        58        58
        REORDER  1.3.1  2018/10/30 15:43:03 ?         ?
        HDREDIT2 3.1.1  2018/10/30 15:44:17 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2018/10/26 15:38:18 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1900, 50000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:    7
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    47.68 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2018/10/26 16:26:07
             30 records were deleted in this editing session.
              9 changes in channel Salinity:T0:C0
        -CALIB parameters: 2018/10/30 12:17:29
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1060000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    7
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2018/10/30 12:19:18
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2018/10/30 15:44:17
         Applied edit header: P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  8: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Latitude: 49 29.099 N
      ** Longitude: 124 46.048 W
      ** Station: BS11
      ** Depth: 57 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2018-07-18T14:30:41</DateTime>
               <EventSummary numEvents='282'/>
               <Power>
                  <vBattery>17.0</vBattery>
                  <vExternal>0.4</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>53.7</iSys>
                  <iCPU>11.0</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>1638400</Bytes>
                  <BytesFree>1975648256</BytesFree>
                  <Samples>22755</Samples>
                  <SamplesFree>27439559</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>2968</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>2173</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>0766</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='282'/>
               <Event type='Console Suppress' count='16'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2018-07-18T14:30:44</startTime>
            <Data>
    # nquan = 11
    # nvalues = 4564
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       4564
    # span 1 =     -0.062,     57.678
    # span 2 =     -0.061,     57.181
    # span 3 =    10.7771,    19.0818
    # span 4 =    -0.4030,    57.1602
    # span 5 =     1.9366,     3.3624
    # span 6 =   0.038031,   3.682007
    # span 7 =     -1.164,      1.071
    # span 8 =     0.2144,    29.0024
    # span 9 =     3.8628,     6.8039
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Jul 18 2018 14:30:44 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2968</SerialNumber>
    #       <CalibrationDate>22-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.30535958e-003</G>
    #       <H>6.39798216e-004</H>
    #       <I>2.19306163e-005</I>
    #       <J>1.97019170e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2173</SerialNumber>
    #       <CalibrationDate>23-Feb-17</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01676051e+001</G>
    #         <H>1.39410479e+000</H>
    #         <I>-2.69269723e-003</I>
    #         <J>2.58106152e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0766</SerialNumber>
    #       <CalibrationDate>01-Mar-17</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3201e-001</Soc>
    #         <offset>-0.5240</offset>
    #         <A>-4.4417e-003</A>
    #         <B> 2.5497e-004</B>
    #         <C>-3.9030e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.2900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Oct 25 2018 14:20:32, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2018-037\RAW\CTD\CTD Data\2018-037-0007.
    xml P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Oct 26 2018 12:43:44, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2018-037\Processing\convert\2018-037-0
    007.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 35
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Oct 26 2018 13:04:25, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2018-037\Processing\wildedit\2018-037-
    0007.cnv
    # alignctd_adv = sbeox0V 4.000
    # celltm_date = Oct 26 2018 13:05:12, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2018-037\Processing\align\2018-037-0007.
    cnv
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Oct 26 2018 13:05:53, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2018-037\Processing\celltm\2018-037-0007
    .cnv P:\Cruise_Data_Processing\2018-037\Processing\doc\2018-037-ctd.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove a few records corrupted by shed wakes near
     the top and bottom of the cast; salinity was cleaned lightly.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Conductivity and Fluorescence:URU:Wetlabs are nominal and unedited except that some
    records were removed in editing temperature and salinity.

    Salinity samples were taken at the bottom of a few CTD casts and during 3 hydro casts
    with 8 bottles each. There are CTD data collected before 2 of the hydro casts. The CTD
    was found to be higher than bottle samples by approximately 0.007psu but incomplete
    flushing of Niskin bottles is likely so the CTD salinity may be closer to, or even lower
    than, in situ conditions. The accuracy of the CTD salinity is likely within +/-0.005psu.
    No recalibration was applied.

    There was dissolved oxygen sampling for this cruise, but there was too much scatter
    in the comparison with CTD DO and too few samples to enable a justifiable method for
    excluding outliers. Many samples were flagged 3 by the analyst and the range of DO
    was limited. The comparison suggested a correction of between 4% and 11%. There was an
    earlier cruise with a comparison to a CTD911+ cast that suggested that the CTD DO
    should be increased by 6%. While that comparison was also of limited quality, it looks
    more reliable, so the 6% correction was applied.

    Warning: While the CTD fluorescence data are expressed in concentration units, they
    do not always compare well to extracted chlorophyll samples.

    For details on the processing see document: 2018-037_Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.06)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- ----8---- -9--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Conductiv Numb
!re            ure:     cence:  :T0:C0   :      n:    ity:      er_o
!              Primary  URU:             Dissol Disso Primary   ~bin
!                       Wetlabs          ved:   lved:           _rec
!                                        SBE    SBE             ords
!------ ------ -------- ------- -------- ------ ----- --------- ----
*END OF HEADER
    1.3    1.3  17.6950   4.218  27.1723   7.11 311.3  3.632984   11
    2.0    2.0  17.6431   4.165  27.1866   7.04 308.5  3.630567   26
    3.0    3.0  17.4684   4.548  27.2334   6.98 305.6  3.622190   23
    4.0    3.9  17.2517   4.914  27.2830   6.96 304.6  3.610762   22
    5.0    5.0  17.1364   5.241  27.3023   6.98 305.6  3.603838   22
    6.0    6.0  17.1103   5.313  27.3057   6.97 305.3  3.602191   21
    7.0    7.0  17.0787   5.124  27.3134   6.88 301.4  3.600599   20
    8.0    7.9  17.0820   5.253  27.3134   6.80 297.9  3.600812   19
    9.0    8.9  16.9351   5.058  27.3474   6.73 294.6  3.592963   18
   10.0    9.9  16.6597   5.389  27.4053   6.53 285.8  3.577933   19
   11.0   10.9  16.5837   5.494  27.4231   6.15 269.1  3.573961   18
   12.0   11.9  16.2612   5.316  27.4934   5.78 252.8  3.556320   16
   13.0   12.9  15.5559   5.503  27.6704   5.52 241.5  3.520090   15
   14.0   13.9  14.7935   5.090  27.8640   5.29 231.5  3.480890   16
   15.0   14.9  14.1987   4.605  27.9974   5.03 220.1  3.447982   16
   16.0   15.8  13.5252   4.044  28.1319   4.80 210.1  3.408698   16
   17.0   16.8  13.3073   3.766  28.1512   4.68 204.8  3.393325   16
   18.0   17.8  12.5977   3.047  28.3209   4.66 203.8  3.354650   16
   19.0   18.8  12.2521   2.436  28.4665   4.63 202.5  3.342443   17
   20.0   19.8  12.0130   2.150  28.5371   4.56 199.4  3.330703   16
   21.0   20.8  11.8765   1.995  28.5945   4.49 196.2  3.325788   16
   22.0   21.8  11.7266   1.983  28.6424   4.45 194.4  3.318768   16
   23.0   22.8  11.5747   1.516  28.6909   4.41 192.7  3.311639   16
   24.0   23.8  11.4603   1.446  28.7291   4.38 191.4  3.306428   16
   25.0   24.8  11.3890   1.274  28.7449   4.37 191.0  3.302364   17
   26.0   25.8  11.3673   1.291  28.7530   4.37 190.9  3.301500   16
   27.0   26.8  11.3464   1.198  28.7641   4.36 190.4  3.300993   16
   28.0   27.8  11.3102   1.346  28.7891   4.33 189.2  3.300717   16
   29.0   28.7  11.2687   1.235  28.8062   4.30 187.7  3.299174   16
   30.0   29.7  11.2386   1.139  28.8167   4.26 186.3  3.297863   16
   31.0   30.7  11.2090   1.143  28.8254   4.24 185.0  3.296410   17
   32.0   31.7  11.1582   1.069  28.8412   4.23 184.9  3.294017   16
   33.0   32.7  11.1099   0.888  28.8566   4.23 184.9  3.291759   16
   34.0   33.7  11.0953   0.890  28.8639   4.23 184.9  3.291325   16
   35.0   34.7  11.0939   0.967  28.8656   4.23 184.9  3.291422   17
   36.0   35.7  11.0945   0.943  28.8665   4.23 184.7  3.291610   16
   37.0   36.7  11.0972   0.817  28.8669   4.22 184.4  3.291905   16
   38.0   37.7  11.1024   0.851  28.8660   4.21 184.1  3.292269   16
   39.0   38.6  11.1039   0.828  28.8669   4.21 183.8  3.292527   16
   40.0   39.6  11.0919   0.898  28.8739   4.19 183.2  3.292312   16
   41.0   40.6  11.0668   0.844  28.8851   4.18 182.8  3.291475   17
   42.0   41.6  11.0383   0.911  28.8971   4.18 182.5  3.290453   16
   43.0   42.6  10.9908   0.845  28.9148   4.17 182.2  3.288472   17
   44.0   43.6  10.9808   0.799  28.9182   4.15 181.3  3.288055   16
   45.0   44.6  10.9718   0.778  28.9223   4.14 180.7  3.287786   17
   46.0   45.6  10.9387   0.784  28.9355   4.13 180.4  3.286513   16
   47.0   46.6  10.8824   0.708  28.9582   4.12 180.1  3.284334   17
   48.0   47.6  10.8618   0.779  28.9664   4.13 180.3  3.283545   17
   49.0   48.6  10.8504   0.692  28.9709   4.13 180.3  3.283117   17
   50.0   49.6  10.8525   0.733  28.9704   4.12 180.1  3.283278   18
   51.0   50.6  10.8491   0.763  28.9718   4.12 180.1  3.283187   17
   52.0   51.6  10.8367   0.732  28.9770   4.12 179.7  3.282759   18
   53.0   52.5  10.8358   0.726  28.9775   4.11 179.4  3.282774   17
   54.0   53.5  10.8287   0.730  28.9807   4.10 179.2  3.282565   17
   55.0   54.5  10.8057   0.714  28.9889   4.10 178.9  3.281588   17
   56.0   55.5  10.8016   0.673  28.9905   4.10 179.2  3.281457   17
   57.0   56.6  10.7966   0.670  28.9937   4.11 179.3  3.281427   18
   57.6   57.1  10.7795   0.769  29.0001   4.11 179.5  3.280710    4