*2018/03/06 10:01:32.12
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2017/10/04 22:36:26.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 59
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : E3879C96
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.099          58.735
       2 Depth                      metres          1.087          58.255
       3 Temperature:Primary        'deg C (ITS90)' 13.662         14.4613
       4 Fluorescence:URU:Wetlabs   mg/m^3          1.149          1.97
       5 Salinity:T0:C0             PSS-78          29.9558        30.4681
       6 Oxygen:Dissolved:SBE       mL/L            5.031          5.757
       7 Oxygen:Dissolved:SBE       umol/kg         219.6821       251.4273
       8 Number_of_bin_records      n/a             3              30
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  -99   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2017-65\Pro
    $END

*ADMINISTRATION
    MISSION             : 2017-65
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : SoG/JdF Water Properties Survey
    SCIENTIST           : Chandler P.
    PLATFORM            : Vector

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia / Juan de Fuca Strait
    STATION             : Cypress
    EVENT NUMBER        : 5
    LATITUDE            :  49  15.20000 N  ! (deg min)
    LONGITUDE           : 125  52.13800 W  ! (deg min)
    WATER DEPTH         : 93

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : 25+
    SERIAL NUMBER       : 1123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             4888
        Conductivity                       ' '             3396
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             3234
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SOFTWAREVERSION>1.0</SOFTWAREVERSION>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.5.2  2018/02/27 16:05:33      4315      4315
        CLEAN    5.2.2  2018/02/27 16:38:14      4315      4315
        CLIP     1.3    2018/02/28 10:07:17      4315      2516
        SHIFTDAT 3.4    2018/02/28 10:46:31      2516      2516
        DELETE   6.3    2018/02/28 10:51:54      2516      1106
        CTDEDIT  5.2.3  2018/02/28 14:32:43      1106      1073
        CALIB    11.9   2018/03/06 09:33:32      1073      1073
        FILTERS  4.3    2018/03/06 09:36:45      1073      1073
        BINAVE   4.2    2018/03/06 09:46:02      1073        59
        REMOVECH 8.2    2018/03/06 09:46:39        59        59
        CHGUNITS 3.1.1  2018/03/06 09:46:51        59        59
        REORDER  1.3.1  2018/03/06 09:47:14 ?         ?
        HDREDIT2 3.1.1  2018/03/06 10:01:32 ?         ?
    $END
   $REMARKS
       -CLEAN functions: 2018/02/27 16:38:14
        Reset #RECS, MIN & MAX values in header.
        Interpolation by   Record Number, in Pressure
        Set event to last  4 characters of file name
       -The following CLIP parameters were used.
        Clip by Record Number Limits
        First Record,Last Record =   1800,300000
        Time Not Available in File
       -The following SHIFT parameters were used.
        Shift Channel: Conductivity:Primary
        # of Records to Advance (-ve for Delay):
        At REC#     0 Shift=  1.30
        Salinity was recalculated after shift
       -The following DELETE parameters were used:
        Surface Record Removal: Last Press Min
          Maximum Surface Pressure (relative):      10.00
          Surface Swell Pressure Tolerance:       1.00
        Pressure filtered over width:   11
        Swells deleted. Warning message if pressure difference of      2.00
        Drop rates <   0.30m/s (calculated over   9 points) will be deleted.
        Drop rate applies in the range    10.00 to    48.90 dbars
        Sample interval (from FILE section of header) =     0.062 seconds.
       -CTDEDIT  v5.2.3   2018/02/28 14:32:43
            33 records were deleted in this editing session.
             3 changes in channel Salinity:T0:C0
       -CALIB parameters: 2018/03/06 09:33:32
        Calibration type = Calculate
        Mode: ONLY - calibration specs from Cal File only.
        Calibration file = P:\Cruise_Data_Processing\2017-65\Processing\doc\2017-65-sbe25-recal1.CCF
        Calibrations applied:
        Ch Name                          Units    Fmla Coefficents
        -- ----------------------------- --------- --- -----------------------------
        10 Oxygen:Dissolved:SBE          mL/L       10  0.4130000E-01  0.1048400E+01
       -The following FILTER parameters were used.
        Median filter was used.
        Filter width =    7
        The following channel(s) were filtered.
          Fluorescence:URU:Wetlabs:ECO-AFL
       -The following BINAVE parameters were used:
        Bin channel = Pressure
        Averaging interval =    1.00
        Minimum bin value =       0.000
        Average value was used
        Interpolated values were NOT used for empty bins
        Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
       -REMOVECH 2018/03/06 09:46:39
        The following CHANNEL(S) were removed:
         Scan_Number
         Conductivity:Primary [S/m]
         Oxygen:Voltage:SBE [volts]
         Descent_Rate [m/s]
         Flag
       -CHANGE units:
        Temperature reference channel: Temperature:Primary [deg C (ITS90)]
        Salinity    reference channel: Salinity:T0:C0 [PSS-78]
        'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
       -HEADER EDITS: 2018/03/06 10:01:32
        Applied edit header: P:\Cruise_Data_Processing\2017-65\Processing\doc\2017-65-sbe25-HDR.TXT
        Channel  1: Pressure [decibar]
          Format: F11.2 ==> F7.1
        Channel  6: Oxygen:Dissolved:SBE [mL/L]
          Format: F8.3 ==> F7.2
        Channel  8: Number_of_bin_records [n/a]
          Pad:    ' ' ==> -99
        Channel  2: Depth [metres]
          Name:   Depth:Salt_Water ==> Depth
          Format: F10.3 ==> F7.1
        Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
          Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
   $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** Cypress morring
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2017-10-04T22:36:23</DateTime>
               <EventSummary numEvents='278'/>
               <Power>
                  <vBattery>17.3</vBattery>
                  <vExternal>0.5</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>58.6</iSys>
                  <iCPU>26.1</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>248119296</Bytes>
                  <BytesFree>1729167360</BytesFree>
                  <Samples>3446101</Samples>
                  <SamplesFree>24016213</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-4888</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>3396</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>43-3234</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='278'/>
               <Event type='Console Suppress' count='12'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2017-10-04T22:36:26</startTime>
            <Data>
    # nquan = 11
    # nvalues = 4315
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 6 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 1
    # name 10 = flag: flag
    # span 0 =          1,       4315
    # span 1 =     -0.025,     58.898
    # span 2 =     -0.025,     58.390
    # span 3 =    13.6614,    20.0298
    # span 4 =   0.074395,   3.845034
    # span 5 =     1.7618,     2.6108
    # span 6 =    -0.4030,    64.5970
    # span 7 =     -0.964,      0.964
    # span 8 =     0.4167,    31.2010
    # span 9 =     3.6152,     6.6870
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Oct 04 2017 22:36:26 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4888</SerialNumber>
    #       <CalibrationDate>07-Nov-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.32597248e-003</G>
    #       <H>6.34179463e-004</H>
    #       <I>2.16751589e-005</I>
    #       <J>1.98413605e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>22-Dec-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91552244e+000</G>
    #         <H>1.31333188e+000</H>
    #         <I>2.80240861e-004</I>
    #         <J>4.41173417e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>3234</SerialNumber>
    #       <CalibrationDate>03-Nov-15</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>5.3831e-001</Soc>
    #         <offset>-0.5530</offset>
    #         <A>-3.6948e-003</A>
    #         <B> 1.5409e-004</B>
    #         <C>-2.3179e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.1700</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Feb 22 2018 15:38:37, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2017-65\RAW\CTD\25+ data\2017-65_0005.xm
    l P:\Cruise_Data_Processing\2017-65\Processing\doc\2017-65-sbe25-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Feb 22 2018 16:36:28, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2017-65\Processing\convert\SBE25\2017-
    65_0005.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prdM depSM t090C c0S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Feb 27 2018 15:15:43, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2017-65\Processing\convert\SBE25\2017-
    65_0005.cnv
    # alignctd_adv = sbeox0V 1.000
    # celltm_date = Feb 27 2018 15:46:12, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2017-65\Processing\align\SBE25\2017-65_0
    005.cnv
    # celltm_alpha = 0.0300, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Feb 27 2018 15:51:59, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2017-65\Processing\celltm\SBE25\2017-65_
    0005.cnv P:\Cruise_Data_Processing\2017-65\Processing\doc\2017-65-sbe25-ctd.xmlcon
    # derive_time_window_docdt = seconds: 1
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove near-surface records and records corrupted by
     shed wakes; salinity was cleaned lightly.
    --------------------------------------------------------------------------------------

    Data Processing Notes:
    ----------------------
    Most casts during this cruise were taken using an SBE911 CTD mounted in a rosette.
       However, the data in this file were collected using an SBE25 CTD without
       the use of a rosette.

    No calibration sampling was available for the SBE25 for this cruise.

    Recalibration of dissolved oxygen was based on sampling during cruise 2017-01 in
       February 2017.

    There was salinity calibration sampling during a series of cruises in the Strait of
       Georgia in 2017 (2017-07, 2017-48, 2017-49). There was a lot of scatter in
       the comparison but the CTD salinity appeared to be within 0.003psu of bottles.
       No recalibration has been applied to the CTD salinity in this file.

    Fluorescence:URU:Wetlabs data are nominal and unedited except that some records were
       removed in editing temperature and salinity.

    Warning: While the CTD fluorescence data are expressed in concentration units, they
       do not always compare well to extracted chlorophyll samples.

    For details on the processing see document: 2017-65_Processing_Report.doc.

*CALIBRATION

    $TABLE: CALCULATED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0.413E-01 1.0484)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- -8--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Numb
!re            ure:     cence:  :T0:C0   :      n:    er_o
!              Primary  URU:             Dissol Disso ~bin
!                       Wetlabs          ved:   lved: _rec
!                                        SBE    SBE   ords
!------ ------ -------- ------- -------- ------ ----- ----
*END OF HEADER
    1.1    1.1  14.4613   1.573  29.9558   5.76 251.4   26
    2.0    2.0  14.3933   1.721  29.9987   5.59 244.0   30
    3.0    3.0  14.3385   1.632  30.0471   5.35 233.5   25
    4.0    4.0  14.3177   1.571  30.0612   5.17 225.7   20
    5.0    5.0  14.3023   1.521  30.0714   5.11 223.2   18
    6.0    5.9  14.2969   1.506  30.0741   5.10 222.8   19
    7.0    6.9  14.2946   1.485  30.0757   5.09 222.3   17
    8.0    7.9  14.2954   1.331  30.0756   5.10 222.9   18
    9.0    8.9  14.2953   1.384  30.0755   5.13 223.9   17
   10.0    9.9  14.2907   1.370  30.0780   5.13 224.0   16
   11.0   10.9  14.2879   1.381  30.0801   5.12 223.7   18
   12.0   11.9  14.2871   1.364  30.0809   5.12 223.4   17
   13.0   12.9  14.2811   1.344  30.0882   5.12 223.5   18
   14.0   13.9  14.2771   1.333  30.0932   5.09 222.4   18
   15.0   14.9  14.2610   1.205  30.1054   5.06 220.8   18
   16.0   15.9  14.2479   1.198  30.1155   5.06 221.0   17
   17.0   16.9  14.2347   1.162  30.1280   5.03 219.7   18
   18.0   17.9  14.2237   1.159  30.1385   5.05 220.6   17
   19.0   18.8  14.2092   1.162  30.1471   5.07 221.4   18
   20.0   19.8  14.1796   1.184  30.1676   5.10 222.6   18
   21.0   20.8  14.1499   1.230  30.1877   5.09 222.1   17
   22.0   21.8  14.1206   1.149  30.2078   5.10 222.5   18
   23.0   22.8  14.0959   1.174  30.2242   5.11 223.0   18
   24.0   23.8  14.0789   1.302  30.2344   5.13 223.9   17
   25.0   24.8  14.0566   1.264  30.2475   5.16 225.4   18
   26.0   25.8  14.0505   1.272  30.2510   5.20 227.2   18
   27.0   26.8  14.0455   1.342  30.2540   5.21 227.2   17
   28.0   27.7  14.0455   1.306  30.2539   5.17 225.8   17
   29.0   28.7  14.0469   1.382  30.2532   5.18 226.2   18
   30.0   29.7  14.0420   1.463  30.2560   5.18 226.3   17
   31.0   30.7  14.0311   1.367  30.2611   5.19 226.5   16
   32.0   31.7  14.0210   1.451  30.2658   5.22 227.7   18
   33.0   32.7  14.0206   1.534  30.2661   5.26 229.6   18
   34.0   33.7  14.0239   1.380  30.2643   5.24 228.7   17
   35.0   34.7  14.0207   1.481  30.2660   5.24 228.8   18
   36.0   35.7  14.0180   1.467  30.2675   5.22 228.0   18
   37.0   36.7  14.0173   1.461  30.2680   5.25 229.3   18
   38.0   37.7  13.9445   1.509  30.3060   5.25 229.2   18
   39.0   38.7  13.8752   1.621  30.3441   5.30 231.5   18
   40.0   39.7  13.8284   1.671  30.3707   5.36 234.0   18
   41.0   40.7  13.8070   1.730  30.3820   5.35 233.7   18
   42.0   41.6  13.8023   1.753  30.3843   5.37 234.3   18
   43.0   42.6  13.8034   1.632  30.3836   5.34 233.3   18
   44.0   43.6  13.7974   1.642  30.3869   5.34 233.1   19
   45.0   44.6  13.7967   1.756  30.3873   5.33 232.8   18
   46.0   45.6  13.7940   1.794  30.3889   5.34 233.3   19
   47.0   46.6  13.7924   1.812  30.3898   5.34 233.3   18
   48.0   47.6  13.7906   1.758  30.3905   5.34 233.2   19
   49.0   48.6  13.7871   1.843  30.3922   5.35 233.5   18
   50.0   49.6  13.7839   1.827  30.3941   5.35 233.5   19
   51.0   50.6  13.7844   1.817  30.3941   5.36 234.0   18
   52.0   51.5  13.7612   1.786  30.4074   5.36 233.9   19
   53.0   52.5  13.7426   1.776  30.4185   5.36 233.9   19
   54.0   53.5  13.7306   1.879  30.4259   5.35 233.4   18
   55.0   54.5  13.7045   1.835  30.4422   5.34 233.1   18
   56.0   55.5  13.6850   1.940  30.4539   5.34 232.9   18
   57.0   56.5  13.6729   1.927  30.4614   5.35 233.6   18
   58.0   57.5  13.6676   1.907  30.4646   5.33 232.6   18
   58.7   58.3  13.6620   1.970  30.4681   5.32 232.3    3