*2017/11/28 15:44:52.08
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2017/05/24 21:10:35.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 91
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 2D12D3ED
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.063          90.65
       2 Depth                      metres          1.054          89.861
       3 Temperature:Primary        'deg C (ITS90)' 9.0682         10.5027
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.5            4.127
       5 Salinity:T0:C0             PSS-78          27.4696        30.9141
       6 Oxygen:Dissolved:SBE       mL/L            4.743          6.678
       7 Oxygen:Dissolved:SBE       umol/kg         206.7983       291.8133
       8 Number_of_bin_records      n/a             8              21
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2017-48\Pro
    $END

*ADMINISTRATION
    MISSION             : 2017-48
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : SC04
    EVENT NUMBER        : 30
    LATITUDE            :  48  43.53000 N  ! (deg min)
    LONGITUDE           : 123  25.04200 W  ! (deg min)
    WATER DEPTH         : 96

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 1123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             4888
        Conductivity                       ' '             3396
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             3234
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SOFTWAREVERSION>1.0</SOFTWAREVERSION>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.5.2  2017/11/27 09:57:21      5713      5713
        CLEAN    5.2.2  2017/11/27 09:57:30      5713      5713
        MERGEHDR 1.3    2017/11/27 09:57:37      5713      5713
        CLIP     1.3    2017/11/27 10:26:21      5713      3794
        SHIFTDAT 3.4    2017/11/27 10:55:07      3794      3794
        DELETE   6.3    2017/11/27 10:58:33      3794      1515
        CTDEDIT  5.2.3  2017/11/28 14:03:10      1515      1452
        CALIB    11.9   2017/11/28 14:41:01      1452      1452
        FILTERS  4.3    2017/11/28 14:42:01      1452      1452
        BINAVE   4.2    2017/11/28 14:42:13      1452        91
        REMOVECH 8.2    2017/11/28 14:42:32        91        91
        CHGUNITS 3.1.1  2017/11/28 14:42:41        91        91
        REORDER  1.3.1  2017/11/28 14:42:46 ?         ?
        HDREDIT2 3.1.1  2017/11/28 15:44:52 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2017/11/27 09:57:24 20
         Reset #RECS, MIN & MAX values in header.
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1920,100000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.20
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   7 points) will be deleted.
         Drop rate applies in the range    10.00 to    80.82 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2017/11/28 14:03:10
             63 records were deleted in this editing session.
            163 changes in channel Salinity:T0:C0
        -CALIB parameters: 2017/11/28 14:41:01
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2017-48\Processing\doc\2017-48-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.4130000E-01  0.1048400E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    5
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2017/11/28 14:42:32
         The following CHANNEL(S) were removed:
          Scan_Number
          Conductivity:Primary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temp*
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2017/11/28 15:44:52
         Applied edit header: P:\Cruise_Data_Processing\2017-48\Processing\doc\2017-48-HDR.TXT
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** sc-04, 91m, 48 43.530 x 123 25.042
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2017-05-24T21:10:31</DateTime>
               <EventSummary numEvents='220'/>
               <Power>
                  <vBattery>15.6</vBattery>
                  <vExternal>0.3</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>65.9</iSys>
                  <iCPU>15.4</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>12058624</Bytes>
                  <BytesFree>1965228032</BytesFree>
                  <Samples>167480</Samples>
                  <SamplesFree>27294833</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-4888</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>3396</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>43-3234</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='220'/>
               <Event type='Console Suppress' count='8'/>
               <Event type='Power On Reset' count='212'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2017-05-24T21:10:35</startTime>
            <Data>
    # nquan = 11
    # nvalues = 5713
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       5713
    # span 1 =     -0.038,     90.818
    # span 2 =     -0.038,     90.028
    # span 3 =     9.0676,    13.0990
    # span 4 =  -0.001345,   3.331804
    # span 5 =    -0.4030,    64.5970
    # span 6 =     1.8278,     2.3841
    # span 7 =     -1.208,      1.166
    # span 8 =     0.0000,    30.9171
    # span 9 =     4.4822,     6.4957
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = May 24 2017 21:10:35 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4888</SerialNumber>
    #       <CalibrationDate>07-Nov-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.32597248e-003</G>
    #       <H>6.34179463e-004</H>
    #       <I>2.16751589e-005</I>
    #       <J>1.98413605e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>22-Dec-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91552244e+000</G>
    #         <H>1.31333188e+000</H>
    #         <I>2.80240861e-004</I>
    #         <J>4.41173417e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>3234</SerialNumber>
    #       <CalibrationDate>03-Nov-15</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>5.3831e-001</Soc>
    #         <offset>-0.5530</offset>
    #         <A>-3.6948e-003</A>
    #         <B> 1.5409e-004</B>
    #         <C>-2.3179e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.1700</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Jun 19 2017 11:37:29, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2017-48\raw\CTD\2017-48-0030.xml P:\Crui
    se_Data_Processing\2017-48\Processing\doc\2017-48-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wfilter_date = Nov 27 2017 08:37:35, 7.23.2
    # wfilter_in = P:\Cruise_Data_Processing\2017-48\Processing\convert\2017-48-0030
    .cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action prdM = cosine, 7
    # wfilter_action depSM = cosine, 7
    # wfilter_action t090C = cosine, 7
    # wfilter_action c0S/m = cosine, 7
    # alignctd_date = Nov 27 2017 08:38:15, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2017-48\Processing\wfilter\2017-48-003
    0.cnv
    # alignctd_adv = sbeox0V 2.000
    # celltm_date = Nov 27 2017 08:39:09, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2017-48\Processing\align\2017-48-0030.cn
    v
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 27 2017 08:39:56, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2017-48\Processing\celltm\2017-48-0030.c
    nv P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-ctd2.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove some near-surface records and records
     corrupted by shed wakes near the bottom of the cast; salinity was
     cleaned.

    Data Processing Notes:
    ----------------------
    Dissolved Oxygen and Fluorescence are nominal and unedited, except
      that some  records were removed in editing temperature and salinity.

    While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore. It is suggested that extracted chlorophyll values be
      checked where available.

    Comparison with 3 bottles suggests that the CTD salinity may be reading slightly
      high. There is insufficient evidence to justify recalibration.

    There was no dissolved oxygen calibration sampling, so the recalibration used for
      cruise 2017-01 was applied to these data since the same sensor was used and
      calibration sampling was extensive.

    For details on the processing see processing report: 2017-48-Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0.413E-01 1.0484)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- -8--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Numb
!re            ure:     cence:  :T0:C0   :      n:    er_o
!              Primary  URU:             Dissol Disso ~bin
!                       Wetlabs          ved:   lved: _rec
!                                        SBE    SBE   ords
!------ ------ -------- ------- -------- ------ ----- ----
*END OF HEADER
    1.1    1.1  10.5027   0.574  27.4696   6.27 274.1   21
    2.0    2.0  10.4031   0.650  27.4937   6.27 274.0   20
    3.0    3.0  10.3268   0.771  27.5665   6.32 276.3   19
    4.0    4.0  10.3392   1.159  27.6938   6.38 278.7   18
    5.0    5.0  10.3461   1.509  27.8548   6.44 281.5   18
    6.0    5.9  10.3523   2.187  27.8845   6.46 282.5   18
    7.0    6.9  10.3587   2.851  27.9104   6.47 283.0   17
    8.0    7.9  10.3440   3.019  27.9966   6.50 284.2   17
    9.0    8.9  10.3252   3.613  28.0678   6.51 284.7   16
   10.0    9.9  10.3137   3.894  28.1031   6.50 284.0   17
   11.0   10.9  10.3089   3.405  28.1189   6.50 283.8   17
   12.0   11.9  10.3088   3.242  28.1653   6.51 284.6   17
   13.0   12.9  10.3086   3.227  28.1996   6.55 286.4   17
   14.0   13.9  10.3165   3.413  28.2138   6.58 287.5   16
   15.0   14.9  10.3227   3.717  28.2182   6.59 288.1   17
   16.0   15.9  10.3187   3.602  28.2124   6.58 287.8   17
   17.0   16.9  10.3215   3.396  28.2202   6.59 288.0   17
   18.0   17.8  10.3232   3.507  28.2231   6.58 287.6   16
   19.0   18.8  10.3179   3.383  28.2199   6.56 286.8   17
   20.0   19.9  10.3258   3.465  28.2273   6.61 288.6   17
   21.0   20.8  10.3360   4.127  28.2366   6.64 290.4   17
   22.0   21.8  10.3397   3.503  28.2411   6.66 291.1   18
   23.0   22.8  10.3425   3.676  28.2418   6.67 291.7   17
   24.0   23.8  10.3461   3.207  28.2455   6.68 291.8   16
   25.0   24.8  10.3477   3.732  28.2467   6.68 291.7   17
   26.0   25.8  10.3479   3.575  28.2498   6.67 291.7   16
   27.0   26.8  10.3473   3.502  28.2444   6.66 291.2   16
   28.0   27.8  10.3463   3.622  28.2447   6.65 290.5   17
   29.0   28.7  10.3467   3.389  28.2410   6.66 290.9   16
   30.0   29.7  10.3447   3.637  28.2457   6.64 290.3   17
   31.0   30.8  10.3379   3.542  28.2619   6.64 290.1   16
   32.0   31.7  10.3417   3.479  28.2541   6.65 290.5   15
   33.0   32.7  10.3288   3.978  28.2805   6.66 290.9   17
   34.0   33.7  10.3203   3.685  28.2906   6.67 291.5   16
   35.0   34.7  10.3096   3.428  28.2996   6.66 291.0   16
   36.0   35.7  10.3030   3.144  28.3053   6.60 288.2   15
   37.0   36.7  10.2626   3.461  28.3401   6.41 280.3   16
   38.0   37.7   9.9130   2.249  28.6680   6.13 267.6   16
   39.0   38.7   9.8643   1.370  28.7185   5.92 258.7   17
   40.0   39.7   9.8544   1.595  28.7421   5.91 258.3   16
   41.0   40.6   9.8511   1.417  28.7522   5.92 258.7   15
   42.0   41.6   9.7939   1.414  28.8722   5.89 257.1   16
   43.0   42.6   9.6962   1.388  29.0609   5.80 253.4   17
   44.0   43.6   9.6568   1.316  29.1429   5.74 250.6   16
   45.0   44.6   9.6391   1.431  29.1964   5.73 250.3   17
   46.0   45.6   9.6370   1.360  29.2225   5.73 250.0   17
   47.0   46.6   9.6346   1.378  29.2383   5.71 249.2   15
   48.0   47.6   9.6033   1.331  29.3014   5.67 247.4   16
   49.0   48.6   9.4475   1.185  29.4367   5.61 245.0   15
   50.0   49.6   9.4082   1.017  29.4507   5.56 242.7   16
   51.0   50.5   9.4152   0.984  29.4494   5.54 242.0   16
   52.0   51.5   9.3939   1.054  29.4570   5.54 242.0   16
   53.0   52.5   9.3617   1.096  29.4617   5.53 241.5   15
   54.0   53.5   9.3224   1.145  29.4629   5.52 241.0   15
   55.0   54.5   9.2902   0.994  29.4623   5.50 240.1   16
   56.0   55.5   9.2910   0.905  29.4641   5.47 239.0   16
   57.0   56.5   9.2152   0.967  29.4678   5.47 238.8   16
   58.0   57.5   9.2189   0.841  29.5069   5.46 238.4   14
   59.0   58.5   9.2437   0.826  29.5837   5.42 236.4   16
   60.0   59.5   9.2005   0.695  29.7289   5.36 233.9   15
   61.0   60.5   9.1864   0.684  29.7613   5.33 232.6   15
   62.0   61.5   9.1901   0.722  29.7686   5.33 232.8   15
   63.0   62.4   9.2064   0.725  29.7848   5.33 232.8   16
   64.0   63.4   9.2270   0.816  29.8101   5.33 232.4   14
   65.0   64.4   9.2445   0.689  29.8466   5.32 232.1   15
   66.0   65.4   9.2584   0.649  29.8880   5.31 231.6   15
   67.0   66.4   9.2615   0.685  29.9311   5.29 231.0   16
   68.0   67.4   9.2660   0.566  29.9927   5.26 229.7   15
   69.0   68.4   9.2653   0.586  30.0087   5.23 228.3   15
   70.0   69.4   9.2406   0.577  30.0200   5.21 227.4   14
   71.0   70.4   9.2206   0.511  30.0249   5.22 227.8   15
   72.0   71.4   9.2366   0.512  30.0440   5.21 227.2   14
   73.0   72.3   9.2456   0.500  30.1121   5.18 225.8   15
   74.0   73.3   9.2384   0.536  30.1701   5.15 224.8   15
   75.0   74.3   9.2208   0.541  30.2558   5.10 222.4   15
   76.0   75.4   9.1915   0.577  30.3683   5.03 219.4   14
   77.0   76.3   9.1646   0.640  30.4938   4.96 216.5   14
   78.0   77.3   9.1347   0.664  30.6163   4.89 213.4   15
   79.0   78.3   9.1078   0.685  30.7264   4.83 210.4   15
   80.0   79.3   9.1012   0.732  30.7569   4.80 209.5   14
   81.0   80.3   9.0941   0.750  30.7893   4.79 208.9   14
   82.0   81.3   9.0871   0.766  30.8234   4.77 207.9   14
   83.0   82.3   9.0827   0.730  30.8450   4.76 207.6   14
   84.0   83.3   9.0785   0.785  30.8632   4.75 207.3   15
   85.0   84.3   9.0724   0.876  30.8916   4.75 207.0   15
   86.0   85.3   9.0700   0.831  30.9030   4.74 206.8   16
   87.0   86.3   9.0682   0.840  30.9125   4.75 207.0   16
   88.0   87.2   9.0683   0.909  30.9129   4.76 207.5   16
   89.0   88.2   9.0726   0.784  30.8952   4.76 207.5   18
   90.0   89.2   9.0716   0.830  30.9005   4.76 207.5   19
   90.7   89.9   9.0685   0.644  30.9141   4.75 207.2    8