*2017/11/23 16:03:49.85
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2017/04/24 00:13:49.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 21
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 32501E0A
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.14           21.076
       2 Depth                      metres          1.131          20.896
       3 Temperature:Primary        'deg C (ITS90)' 8.8926         10.6616
       4 Fluorescence:URU:Wetlabs   mg/m^3          1.339          4.628
       5 Salinity:T0:C0             PSS-78          23.5662        27.8139
       6 Oxygen:Dissolved:SBE       mL/L            5.335          8.437
       7 Oxygen:Dissolved:SBE       umol/kg         233.1538       369.9862
       8 Number_of_bin_records      n/a             4              27
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2017-47\Pro
    $END

*ADMINISTRATION
    MISSION             : 2017-47
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : IS-2
    EVENT NUMBER        : 16
    LATITUDE            :  49  38.21000 N  ! (deg min)
    LONGITUDE           : 124   5.00800 W  ! (deg min)
    WATER DEPTH         : 29

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 1123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             4888
        Conductivity                       ' '             4513
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             3234
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SOFTWAREVERSION>1.0</SOFTWAREVERSION>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.5.2  2017/11/22 14:09:51      2873      2873
        CLEAN    5.2.2  2017/11/22 14:10:09      2873      2873
        CLIP     1.3    2017/11/22 14:10:56      2873      1024
        SHIFTDAT 3.4    2017/11/22 14:20:08      1024      1024
        DELETE   6.3    2017/11/22 14:20:23      1024       411
        CTDEDIT  5.2.3  2017/11/23 12:07:43       411       351
        CALIB    11.9   2017/11/23 14:24:39       351       351
        FILTERS  4.3    2017/11/23 14:24:49       351       351
        BINAVE   4.2    2017/11/23 14:25:02       351        21
        REMOVECH 8.2    2017/11/23 14:25:34        21        21
        CHGUNITS 3.1.1  2017/11/23 14:26:11        21        21
        REORDER  1.3.1  2017/11/23 14:27:44 ?         ?
        HDREDIT2 3.1.1  2017/11/23 16:03:49 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2017/11/22 14:10:06 20
         Reset #RECS, MIN & MAX values in header.
         Delete Empty Channels:     0 deleted.
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1850,100000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.20
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   7 points) will be deleted.
         Drop rate applies in the range    10.00 to    11.32 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2017/11/23 12:07:43
             60 records were deleted in this editing session.
              9 changes in channel Salinity:T0:C0
        -CALIB parameters: 2017/11/23 14:24:39
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2017-47\Processing\doc\2017-47-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.4130000E-01  0.1048400E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2017/11/23 14:25:34
         The following CHANNEL(S) were removed:
          Scan_Number
          Conductivity:Primary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2017/11/23 16:03:49
         Applied edit header: P:\Cruise_Data_Processing\2017-47\Processing\doc\2017-47-HDR.TXT
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** * Latitude: 49 38.210 N
      ** * Longitude: 124 5.008 W
      ** * Station: IS-2
      ** * Depth: 29 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2017-04-24T00:13:46</DateTime>
               <EventSummary numEvents='149'/>
               <Power>
                  <vBattery>16.0</vBattery>
                  <vExternal>0.1</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>58.6</iSys>
                  <iCPU>26.6</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>6979584</Bytes>
                  <BytesFree>1970307072</BytesFree>
                  <Samples>96938</Samples>
                  <SamplesFree>27365376</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-4888</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>04-4513</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>43-3234</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='149'/>
               <Event type='Console Suppress' count='8'/>
               <Event type='Power On Reset' count='141'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2017-04-24T00:13:49</startTime>
            <Data>
    # nquan = 11
    # nvalues = 2873
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       2873
    # span 1 =     -0.138,     21.317
    # span 2 =     -0.137,     21.135
    # span 3 =     8.8122,    10.6708
    # span 4 =   0.048374,   3.034331
    # span 5 =    -0.4030,    18.2753
    # span 6 =     2.0935,     2.8247
    # span 7 =     -1.056,      0.972
    # span 8 =     0.3279,    28.1066
    # span 9 =     4.8176,     8.5218
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Apr 24 2017 00:13:49 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4888</SerialNumber>
    #       <CalibrationDate>07-Nov-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.32597248e-003</G>
    #       <H>6.34179463e-004</H>
    #       <I>2.16751589e-005</I>
    #       <J>1.98413605e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>4513</SerialNumber>
    #       <CalibrationDate>28-Oct-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.70547606e+000</G>
    #         <H>1.47193126e+000</H>
    #         <I>1.76526613e-004</I>
    #         <J>5.97689162e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>3234</SerialNumber>
    #       <CalibrationDate>03-Nov-15</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>5.3831e-001</Soc>
    #         <offset>-0.5530</offset>
    #         <A>-3.6948e-003</A>
    #         <B> 1.5409e-004</B>
    #         <C>-2.3179e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.1700</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Nov 22 2017 14:04:00, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2017-47\RAW\CTD\2017-47-0016.xml P:\Crui
    se_Data_Processing\2017-47\Processing\doc\2017-47-ctd1.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wfilter_date = Nov 22 2017 14:04:50, 7.23.2
    # wfilter_in = P:\Cruise_Data_Processing\2017-47\Processing\convert\2017-47-0016
    .cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action prdM = cosine, 7
    # wfilter_action depSM = cosine, 7
    # wfilter_action t090C = cosine, 7
    # wfilter_action c0S/m = cosine, 7
    # alignctd_date = Nov 22 2017 14:07:38, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2017-47\Processing\wfilter\2017-47-001
    6.cnv
    # alignctd_adv = sbeox0V 2.000
    # celltm_date = Nov 22 2017 14:08:17, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2017-47\Processing\align\2017-47-0016.cn
    v
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 22 2017 14:09:29, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2017-47\Processing\celltm\2017-47-0016.c
    nv P:\Cruise_Data_Processing\2017-47\Processing\doc\2017-47-ctd1.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove some near-surface records corrupted by shed
     wakes.

    Data Processing Notes:
    ----------------------
    Dissolved Oxygen and Fluorescence are nominal and unedited, except
      that some  records were removed in editing temperature and salinity.

    While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore. It is suggested that extracted chlorophyll values be
      checked where available.

    Comparison with 2 bottles suggests that the CTD salinity may be reading slightly
      low. There is insufficient evidence to justify recalibration.

    There was no dissolved oxygen calibration sampling, so the recalibration used for
      cruise 2017-01 was applied to these data since the same sensor was used and
      calibration sampling was extensive.

    For details on the processing see processing report: 2017-47-Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0.413E-01 1.0484)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- -8--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Numb
!re            ure:     cence:  :T0:C0   :      n:    er_o
!              Primary  URU:             Dissol Disso ~bin
!                       Wetlabs          ved:   lved: _rec
!                                        SBE    SBE   ords
!------ ------ -------- ------- -------- ------ ----- ----
*END OF HEADER
    1.1    1.1  10.6616   2.810  23.5662   8.39 367.8   15
    2.0    2.0  10.6476   3.448  23.5859   8.41 368.7   18
    3.4    3.4  10.6355   4.628  23.6054   8.42 369.4    4
    3.6    3.6  10.6131   4.465  23.6417   8.43 369.6    6
    5.2    5.2  10.6087   4.095  23.6495   8.44 370.0   12
    6.0    6.0  10.6063   4.453  23.6535   8.42 369.4   18
    7.0    6.9  10.5998   4.430  23.6654   8.38 367.7   18
    8.0    7.9  10.5936   4.516  23.6775   8.39 368.0   18
    9.0    8.9  10.5914   4.312  23.6823   8.41 368.8   19
   10.0    9.9  10.5882   4.399  23.6888   8.40 368.4   19
   11.0   10.9  10.5834   4.470  23.6996   8.41 369.0   18
   12.0   11.9  10.5778   4.555  23.7120   8.40 368.5   18
   13.0   12.9  10.5730   4.604  23.7243   8.38 367.3   18
   14.0   13.9  10.5706   4.496  23.7358   8.38 367.3   18
   15.0   14.9  10.5651   4.362  23.7634   8.35 366.3   18
   16.0   15.9  10.5276   4.269  23.8974   8.22 360.3   17
   17.0   16.9  10.4005   3.952  24.5483   7.79 341.5   17
   18.0   17.8  10.1574   2.562  25.2155   7.22 316.0   19
   19.0   18.8   9.5470   2.193  26.3810   6.57 287.4   17
   20.0   19.8   9.1580   1.911  27.1112   5.96 260.6   17
   21.1   20.9   8.8926   1.339  27.8139   5.33 233.2   27