*2017/11/27 15:47:03.19
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2017/05/11 20:56:45.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 50
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : FD7E7E91
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         0.953          50.15
       2 Depth                      metres          0.945          49.719
       3 Temperature:Primary        'deg C (ITS90)' 8.6619         12.3081
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.335          3.38
       5 Salinity:T0:C0             PSS-78          24.4603        28.7206
       6 Oxygen:Dissolved:SBE       mL/L            4.614          7.565
       7 Oxygen:Dissolved:SBE       umol/kg         201.4979       331.2191
       8 Number_of_bin_records      n/a             17             28
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2017-26\Pro
    $END

*ADMINISTRATION
    MISSION             : 2017-26
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : BS-11
    EVENT NUMBER        : 31
    LATITUDE            :  49  29.01000 N  ! (deg min)
    LONGITUDE           : 124  46.01000 W  ! (deg min)
    WATER DEPTH         : 60

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 1123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             4888
        Conductivity                       ' '             4513
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             3234
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SOFTWAREVERSION>1.0</SOFTWAREVERSION>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.5.2  2017/11/24 12:04:02      4977      4977
        CLEAN    5.2.2  2017/11/24 12:53:30      4977      4977
        CLIP     1.3    2017/11/24 12:53:43      4977      3128
        SHIFTDAT 3.4    2017/11/24 12:53:54      3128      3128
        DELETE   6.3    2017/11/24 12:54:15      3128      1021
        CTDEDIT  5.2.3  2017/11/24 16:42:03      1021       906
        CALIB    11.9   2017/11/27 13:57:44       906       906
        FILTERS  4.3    2017/11/27 13:58:23       906       906
        BINAVE   4.2    2017/11/27 13:58:28       906        50
        REMOVECH 8.2    2017/11/27 13:59:24        50        50
        CHGUNITS 3.1.1  2017/11/27 13:59:38        50        50
        REORDER  1.3.1  2017/11/27 14:06:44 ?         ?
        HDREDIT2 3.1.1  2017/11/27 15:47:03 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2017/11/24 12:53:25 20
         Reset #RECS, MIN & MAX values in header.
         Delete Empty Channels:     0 deleted.
         Set event to last  4 characters of file name
         Set header Start and End times from the data. *FAILED*
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1850,100000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.20
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   7 points) will be deleted.
         Drop rate applies in the range    10.00 to    40.44 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2017/11/24 16:42:03
            115 records were deleted in this editing session.
             58 changes in channel Salinity:T0:C0
        -CALIB parameters: 2017/11/27 13:57:44
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2017-26\Processing\doc\2017-26-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.4130000E-01  0.1048400E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    5
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2017/11/27 13:59:24
         The following CHANNEL(S) were removed:
          Scan_Number
          Conductivity:Primary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temp*
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2017/11/27 15:47:03
         Applied edit header: P:\Cruise_Data_Processing\2017-26\Processing\doc\2017-26-HDR.TXT
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** * Latitude: 49 29.01 N
      ** * Longitude: 124 46.01 W
      ** * Station: BS-11
      ** * Depth: 60 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2017-05-11T20:56:42</DateTime>
               <EventSummary numEvents='189'/>
               <Power>
                  <vBattery>15.6</vBattery>
                  <vExternal>0.1</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>61.0</iSys>
                  <iCPU>14.2</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>35520512</Bytes>
                  <BytesFree>1941766144</BytesFree>
                  <Samples>493340</Samples>
                  <SamplesFree>26968974</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-4888</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>04-4513</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>43-3234</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='189'/>
               <Event type='Console Suppress' count='8'/>
               <Event type='Power On Reset' count='181'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2017-05-11T20:56:45</startTime>
            <Data>
    # nquan = 11
    # nvalues = 4977
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       4977
    # span 1 =     -0.115,     50.440
    # span 2 =     -0.114,     50.006
    # span 3 =     8.6558,    12.5818
    # span 4 =   0.055948,   3.129228
    # span 5 =    -0.4030,    18.2862
    # span 6 =     1.7647,     2.6764
    # span 7 =     -0.976,      0.993
    # span 8 =     0.3614,    28.7219
    # span 9 =     4.3353,     7.5728
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = May 11 2017 20:56:45 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4888</SerialNumber>
    #       <CalibrationDate>07-Nov-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.32597248e-003</G>
    #       <H>6.34179463e-004</H>
    #       <I>2.16751589e-005</I>
    #       <J>1.98413605e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>4513</SerialNumber>
    #       <CalibrationDate>28-Oct-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.70547606e+000</G>
    #         <H>1.47193126e+000</H>
    #         <I>1.76526613e-004</I>
    #         <J>5.97689162e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>3234</SerialNumber>
    #       <CalibrationDate>03-Nov-15</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>5.3831e-001</Soc>
    #         <offset>-0.5530</offset>
    #         <A>-3.6948e-003</A>
    #         <B> 1.5409e-004</B>
    #         <C>-2.3179e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.1700</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Nov 24 2017 11:56:27, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2017-26\RAW\CTD\2017-26-0031.xml P:\Crui
    se_Data_Processing\2017-26\Processing\doc\2017-26-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wfilter_date = Nov 24 2017 11:59:24, 7.23.2
    # wfilter_in = P:\Cruise_Data_Processing\2017-26\Processing\convert\2017-26-0031
    .cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action prdM = cosine, 7
    # wfilter_action depSM = cosine, 7
    # wfilter_action t090C = cosine, 7
    # wfilter_action c0S/m = cosine, 7
    # alignctd_date = Nov 24 2017 12:00:22, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2017-26\Processing\wfilter\2017-26-003
    1.cnv
    # alignctd_adv = sbeox0V 2.000
    # celltm_date = Nov 24 2017 12:01:15, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2017-26\Processing\align\2017-26-0031.cn
    v
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 24 2017 12:01:58, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2017-26\Processing\celltm\2017-26-0031.c
    nv P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-ctd2.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove some surface records and records corrupted by
     shed wakes near the bottom of the cast; salinity was cleaned.

    Data Processing Notes:
    ----------------------
    Dissolved Oxygen and Fluorescence are nominal and unedited, except
      that some  records were removed in editing temperature and salinity.
      Fluorescence was removed from file #1 because the cap was left on.

    While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore.

    There was no salinity calibration sampling during this cruise. There was such
      sampling during previous cruises using the same sensors and the CTD salinity
      compared well with botttles. Damage to the conductivity cell was discovered after
      this cruise. The salinity from 2 deep casts compares well with a cruise run
      about 2 weeks later in the same area using a different conductivity sensor.
      The calibration appears to be good, so the damage likely occurred in off-loading
      or transport after this cruise.

    There was no dissolved oxygen calibration sampling, so the recalibration used for
      cruise 2017-01 was applied to these data since the same sensor was used and
      calibration sampling was extensive.

    For details on the processing see processing report: 2017-26-Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0.413E-01 1.0484)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- -8--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Numb
!re            ure:     cence:  :T0:C0   :      n:    er_o
!              Primary  URU:             Dissol Disso ~bin
!                       Wetlabs          ved:   lved: _rec
!                                        SBE    SBE   ords
!------ ------ -------- ------- -------- ------ ----- ----
*END OF HEADER
    1.0    0.9  12.3081   1.759  24.4603   7.42 325.1   20
    2.0    2.0  11.8761   2.300  26.0056   7.57 331.2   19
    3.0    3.0  11.6865   2.932  26.2274   7.57 331.2   19
    4.0    4.0  11.4838   3.380  26.5046   7.52 329.1   19
    5.0    5.0  11.3874   3.095  26.6400   7.48 327.2   18
    6.0    6.0  11.1682   2.968  26.8689   7.48 327.1   19
    7.0    6.9  10.8211   3.148  27.1922   7.29 318.9   18
    8.0    7.9  10.7010   2.644  27.2843   7.04 307.7   18
    9.0    8.9  10.4602   2.504  27.4931   7.01 306.6   18
   10.0    9.9  10.1612   2.767  27.7354   6.98 305.2   17
   11.0   10.9   9.9253   2.239  27.9103   6.60 288.5   18
   12.0   11.9   9.6885   1.716  28.1130   6.18 270.0   17
   13.0   12.9   9.6402   1.643  28.1472   6.02 263.0   17
   14.0   13.9   9.6055   1.294  28.1735   6.01 262.5   18
   15.0   14.9   9.5917   1.243  28.1910   6.00 262.4   18
   16.0   15.9   9.5443   1.250  28.2207   5.95 260.1   18
   17.0   16.9   9.3304   1.314  28.3596   5.81 254.0   18
   18.0   17.9   9.1780   0.974  28.4647   5.64 246.3   18
   19.0   18.8   9.1571   0.620  28.4803   5.57 243.2   17
   20.0   19.8   9.1366   0.581  28.4931   5.54 242.1   19
   21.0   20.8   9.0778   0.754  28.5327   5.50 240.1   18
   22.0   21.8   9.0445   0.778  28.5580   5.45 237.9   18
   23.0   22.8   9.0337   0.704  28.5862   5.40 235.7   18
   24.0   23.8   8.9892   0.724  28.6105   5.34 233.1   19
   25.0   24.8   8.9447   0.726  28.6308   5.29 231.0   18
   26.0   25.7   8.9094   0.540  28.6364   5.23 228.3   18
   27.0   26.8   8.8657   0.540  28.6343   5.13 224.1   18
   28.0   27.8   8.7756   0.598  28.6271   5.00 218.6   18
   29.0   28.7   8.7247   0.521  28.6225   4.89 213.6   19
   30.0   29.7   8.7057   0.370  28.6221   4.84 211.3   19
   31.0   30.7   8.6919   0.518  28.6266   4.79 209.3   20
   32.0   31.7   8.6948   0.420  28.6303   4.80 209.9   18
   33.0   32.7   8.6952   0.431  28.6311   4.83 210.8   19
   34.0   33.7   8.6969   0.445  28.6321   4.84 211.3   17
   35.0   34.7   8.6943   0.365  28.6334   4.82 210.6   18
   36.0   35.7   8.6753   0.379  28.6437   4.82 210.4   17
   37.0   36.7   8.6901   0.335  28.6558   4.84 211.4   17
   38.0   37.7   8.7061   0.365  28.6718   4.88 213.0   17
   39.0   38.6   8.7189   0.424  28.6821   4.90 213.8   17
   40.0   39.6   8.7187   0.435  28.6874   4.90 213.8   17
   41.0   40.7   8.7261   0.381  28.6935   4.90 213.8   18
   42.0   41.6   8.7299   0.514  28.7061   4.88 213.1   17
   43.0   42.6   8.6994   0.615  28.7116   4.80 209.4   17
   44.0   43.6   8.6806   0.450  28.7133   4.70 205.4   18
   45.0   44.6   8.6794   0.465  28.7130   4.67 204.0   17
   46.0   45.6   8.6765   0.516  28.7138   4.66 203.4   17
   47.0   46.6   8.6708   0.447  28.7153   4.64 202.6   17
   48.0   47.6   8.6705   0.456  28.7189   4.63 202.2   17
   49.0   48.6   8.6725   0.556  28.7206   4.63 202.4   17
   50.2   49.7   8.6619   0.466  28.7199   4.61 201.5   28