*2017/11/27 15:47:02.87
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2017/05/10 17:48:43.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 121
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 1FB7B428
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.011          121.061
       2 Depth                      metres          1.002          119.999
       3 Temperature:Primary        'deg C (ITS90)' 8.3443         13.2349
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.99E-01       12.115
       5 Salinity:T0:C0             PSS-78          20.4248        29.9135
       6 Oxygen:Dissolved:SBE       mL/L            4.813          8.318
       7 Oxygen:Dissolved:SBE       umol/kg         209.9873       363.8446
       8 Number_of_bin_records      n/a             11             23
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2017-26\Pro
    $END

*ADMINISTRATION
    MISSION             : 2017-26
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : 28
    EVENT NUMBER        : 21
    LATITUDE            :  49  24.10000 N  ! (deg min)
    LONGITUDE           : 123  45.33000 W  ! (deg min)
    WATER DEPTH         : 131

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 1123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             4888
        Conductivity                       ' '             4513
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             3234
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SOFTWAREVERSION>1.0</SOFTWAREVERSION>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.5.2  2017/11/24 12:03:59      6835      6835
        CLEAN    5.2.2  2017/11/24 12:53:29      6835      6835
        CLIP     1.3    2017/11/24 12:53:41      6835      4986
        SHIFTDAT 3.4    2017/11/24 12:53:52      4986      4986
        DELETE   6.3    2017/11/24 12:54:13      4986      2262
        CTDEDIT  5.2.3  2017/11/24 16:30:14      2262      2185
        CALIB    11.9   2017/11/27 13:57:43      2185      2185
        FILTERS  4.3    2017/11/27 13:58:22      2185      2185
        BINAVE   4.2    2017/11/27 13:58:28      2185       121
        REMOVECH 8.2    2017/11/27 13:59:24       121       121
        CHGUNITS 3.1.1  2017/11/27 13:59:38       121       121
        REORDER  1.3.1  2017/11/27 14:06:44 ?         ?
        HDREDIT2 3.1.1  2017/11/27 15:47:02 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2017/11/24 12:53:25 20
         Reset #RECS, MIN & MAX values in header.
         Delete Empty Channels:     0 deleted.
         Set event to last  4 characters of file name
         Set header Start and End times from the data. *FAILED*
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1850,100000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.20
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   7 points) will be deleted.
         Drop rate applies in the range    10.00 to   111.68 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2017/11/24 16:30:14
             77 records were deleted in this editing session.
         No data values were changed.
        -CALIB parameters: 2017/11/27 13:57:43
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2017-26\Processing\doc\2017-26-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.4130000E-01  0.1048400E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    5
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2017/11/27 13:59:24
         The following CHANNEL(S) were removed:
          Scan_Number
          Conductivity:Primary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temp*
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2017/11/27 15:47:02
         Applied edit header: P:\Cruise_Data_Processing\2017-26\Processing\doc\2017-26-HDR.TXT
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** * Latitude: 49 24.10 N
      ** * Longitude: 123 45.33 W
      ** * Station: 28
      ** * Depth: 131 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2017-05-10T17:48:39</DateTime>
               <EventSummary numEvents='182'/>
               <Power>
                  <vBattery>15.8</vBattery>
                  <vExternal>0.1</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>63.5</iSys>
                  <iCPU>15.9</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>25493504</Bytes>
                  <BytesFree>1951793152</BytesFree>
                  <Samples>354076</Samples>
                  <SamplesFree>27108238</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-4888</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>04-4513</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>43-3234</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='182'/>
               <Event type='Console Suppress' count='8'/>
               <Event type='Power On Reset' count='174'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2017-05-10T17:48:43</startTime>
            <Data>
    # nquan = 11
    # nvalues = 6835
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       6835
    # span 1 =     -0.073,    121.677
    # span 2 =     -0.072,    120.610
    # span 3 =     8.3435,    13.6678
    # span 4 =   0.311431,   3.182985
    # span 5 =    -0.4030,    18.2882
    # span 6 =     1.8092,     2.9384
    # span 7 =     -1.348,      1.476
    # span 8 =     2.1336,    29.9169
    # span 9 =     4.5360,     8.2647
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = May 10 2017 17:48:43 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4888</SerialNumber>
    #       <CalibrationDate>07-Nov-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.32597248e-003</G>
    #       <H>6.34179463e-004</H>
    #       <I>2.16751589e-005</I>
    #       <J>1.98413605e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>4513</SerialNumber>
    #       <CalibrationDate>28-Oct-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.70547606e+000</G>
    #         <H>1.47193126e+000</H>
    #         <I>1.76526613e-004</I>
    #         <J>5.97689162e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>3234</SerialNumber>
    #       <CalibrationDate>03-Nov-15</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>5.3831e-001</Soc>
    #         <offset>-0.5530</offset>
    #         <A>-3.6948e-003</A>
    #         <B> 1.5409e-004</B>
    #         <C>-2.3179e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.1700</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Nov 24 2017 11:56:21, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2017-26\RAW\CTD\2017-26-0021.xml P:\Crui
    se_Data_Processing\2017-26\Processing\doc\2017-26-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wfilter_date = Nov 24 2017 11:59:23, 7.23.2
    # wfilter_in = P:\Cruise_Data_Processing\2017-26\Processing\convert\2017-26-0021
    .cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action prdM = cosine, 7
    # wfilter_action depSM = cosine, 7
    # wfilter_action t090C = cosine, 7
    # wfilter_action c0S/m = cosine, 7
    # alignctd_date = Nov 24 2017 12:00:19, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2017-26\Processing\wfilter\2017-26-002
    1.cnv
    # alignctd_adv = sbeox0V 2.000
    # celltm_date = Nov 24 2017 12:01:11, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2017-26\Processing\align\2017-26-0021.cn
    v
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 24 2017 12:01:54, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2017-26\Processing\celltm\2017-26-0021.c
    nv P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-ctd2.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove some surface records and records corrupted by
     shed wakes; salinity was cleaned.

    Data Processing Notes:
    ----------------------
    Dissolved Oxygen and Fluorescence are nominal and unedited, except
      that some  records were removed in editing temperature and salinity.
      Fluorescence was removed from file #1 because the cap was left on.

    While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore.

    There was no salinity calibration sampling during this cruise. There was such
      sampling during previous cruises using the same sensors and the CTD salinity
      compared well with botttles. Damage to the conductivity cell was discovered after
      this cruise. The salinity from 2 deep casts compares well with a cruise run
      about 2 weeks later in the same area using a different conductivity sensor.
      The calibration appears to be good, so the damage likely occurred in off-loading
      or transport after this cruise.

    There was no dissolved oxygen calibration sampling, so the recalibration used for
      cruise 2017-01 was applied to these data since the same sensor was used and
      calibration sampling was extensive.

    For details on the processing see processing report: 2017-26-Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0.413E-01 1.0484)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- -8--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Numb
!re            ure:     cence:  :T0:C0   :      n:    er_o
!              Primary  URU:             Dissol Disso ~bin
!                       Wetlabs          ved:   lved: _rec
!                                        SBE    SBE   ords
!------ ------ -------- ------- -------- ------ ----- ----
*END OF HEADER
    1.0    1.0  13.2349   1.530  20.4248   8.10 356.4   20
    2.0    2.0  12.5280   2.298  23.9044   7.39 324.2   17
    3.0    2.9  11.8524   1.078  24.9317   7.25 317.5   18
    4.0    4.0  11.3507   1.291  25.4448   7.35 322.0   19
    5.0    4.9  11.0024   1.427  25.7971   7.43 325.3   16
    6.0    5.9  10.2119   1.938  26.4934   7.91 346.1   21
    7.0    6.9   9.9212   3.594  26.8363   8.32 363.8   14
    8.0    7.9   9.8263   4.614  26.9697   8.24 360.6   21
    9.0    8.9   9.5539   4.787  27.2340   7.70 336.5   16
   10.0    9.9   9.2150   7.017  27.6328   6.90 301.6   20
   11.0   10.9   9.0720  10.469  27.7809   6.25 273.0   16
   12.0   11.9   8.9954  10.867  27.8782   5.87 256.7   20
   13.1   12.9   8.9451  12.115  28.1394   5.64 246.6   17
   14.0   13.8   8.8432   5.885  28.3749   5.61 245.2   19
   15.1   14.9   8.7982   3.262  28.4817   5.60 244.7   17
   16.0   15.8   8.7636   2.348  28.5413   5.61 245.2   19
   17.0   16.9   8.7264   2.069  28.6266   5.57 243.1   16
   18.0   17.8   8.6910   1.985  28.7007   5.47 238.8   20
   19.0   18.9   8.6536   1.545  28.7266   5.45 237.9   18
   20.0   19.8   8.6317   1.195  28.7666   5.45 238.1   19
   21.0   20.8   8.6141   0.935  28.8068   5.42 236.5   17
   22.0   21.8   8.6086   0.815  28.8371   5.38 235.0   20
   23.0   22.8   8.5993   0.910  28.8570   5.36 234.0   16
   24.0   23.8   8.5902   0.914  28.8838   5.32 232.5   21
   25.0   24.8   8.5663   0.728  28.9334   5.27 230.1   16
   26.0   25.8   8.5485   0.672  28.9797   5.21 227.4   21
   27.0   26.8   8.5495   0.727  28.9977   5.18 226.3   16
   28.0   27.7   8.5497   0.682  29.0087   5.19 226.6   21
   29.0   28.8   8.5528   0.676  29.0230   5.19 226.7   17
   30.0   29.7   8.5542   0.631  29.0428   5.17 225.9   19
   31.0   30.7   8.5447   0.495  29.0788   5.15 225.0   20
   32.0   31.7   8.5174   0.414  29.1059   5.11 223.0   18
   33.0   32.7   8.4880   0.334  29.1270   5.06 221.0   18
   34.0   33.7   8.4663   0.329  29.1313   5.03 219.5   19
   35.0   34.7   8.4496   0.273  29.1374   5.03 219.4   19
   36.0   35.7   8.4395   0.371  29.1626   5.02 219.2   18
   37.0   36.7   8.4487   0.310  29.1937   5.00 218.1   19
   38.0   37.7   8.4537   0.243  29.2036   4.97 217.1   17
   39.0   38.6   8.4528   0.253  29.2104   4.97 216.8   21
   40.0   39.7   8.4506   0.214  29.2137   4.98 217.5   17
   41.0   40.6   8.4993   0.377  29.2493   5.03 219.7   18
   42.0   41.7   8.6363   0.197  29.3021   5.17 225.5   19
   43.0   42.6   8.6762   0.202  29.3276   5.27 230.2   19
   44.1   43.7   8.7465   0.189  29.3697   5.34 233.0   16
   44.9   44.5   8.7391   0.189  29.3820   5.34 233.0   20
   46.0   45.6   8.7687   0.168  29.3965   5.35 233.5   15
   46.9   46.5   8.7812   0.176  29.4055   5.36 233.8   23
   48.0   47.6   8.7565   0.168  29.4125   5.27 230.0   14
   49.0   48.5   8.6018   0.155  29.3952   5.09 222.2   23
   50.0   49.6   8.5851   0.153  29.4182   5.00 218.3   13
   51.0   50.5   8.6326   0.164  29.4404   5.07 221.4   23
   52.0   51.5   8.6664   0.146  29.4628   5.15 224.9   12
   53.0   52.5   8.6293   0.166  29.4705   5.15 224.8   22
   54.0   53.6   8.6131   0.165  29.4736   5.12 223.4   11
   55.0   54.5   8.5889   0.169  29.4755   5.10 222.5   19
   56.0   55.5   8.6732   0.146  29.5126   5.19 226.3   11
   57.0   56.5   8.7154   0.151  29.5383   5.35 233.5   15
   58.0   57.5   8.7042   0.148  29.5472   5.43 236.9   13
   59.0   58.5   8.6885   0.176  29.5491   5.41 236.0   23
   60.0   59.5   8.6612   0.191  29.5499   5.36 234.1   16
   61.1   60.5   8.6528   0.146  29.5526   5.34 232.9   19
   61.9   61.4   8.6599   0.139  29.5562   5.32 232.4   20
   63.1   62.5   8.6810   0.132  29.5661   5.35 233.4   17
   63.9   63.3   8.6754   0.133  29.5690   5.36 234.0   20
   65.0   64.5   8.6405   0.150  29.5736   5.34 233.1   20
   65.9   65.3   8.6230   0.125  29.5861   5.33 232.8   19
   67.1   66.5   8.6203   0.130  29.6009   5.33 232.6   20
   68.0   67.4   8.6192   0.130  29.6048   5.35 233.4   21
   69.0   68.4   8.6146   0.144  29.6093   5.35 233.3   19
   69.9   69.3   8.6008   0.150  29.6141   5.33 232.4   19
   71.0   70.4   8.5895   0.130  29.6241   5.28 230.4   19
   72.0   71.3   8.5850   0.142  29.6294   5.26 229.4   19
   73.0   72.4   8.5706   0.118  29.6384   5.23 228.4   19
   73.9   73.3   8.5694   0.135  29.6425   5.21 227.4   17
   75.0   74.4   8.5691   0.151  29.6441   5.23 228.1   18
   75.9   75.3   8.5684   0.127  29.6451   5.25 229.2   18
   77.0   76.4   8.5659   0.099  29.6474   5.25 228.9   18
   78.0   77.3   8.5616   0.113  29.6496   5.22 227.9   16
   79.0   78.3   8.5575   0.121  29.6506   5.21 227.6   20
   80.0   79.3   8.5539   0.114  29.6514   5.20 227.1   14
   81.1   80.3   8.5503   0.120  29.6517   5.19 226.4   21
   82.0   81.3   8.5515   0.123  29.6537   5.20 226.7   14
   83.1   82.4   8.5617   0.151  29.6584   5.24 228.8   19
   83.9   83.2   8.5772   0.121  29.6715   5.31 231.9   16
   85.0   84.3   8.5709   0.126  29.6915   5.36 233.9   19
   86.0   85.2   8.5628   0.106  29.7063   5.34 233.1   16
   87.0   86.3   8.5625   0.134  29.7317   5.32 232.1   20
   88.0   87.2   8.5657   0.111  29.7430   5.31 231.8   16
   89.0   88.3   8.5694   0.116  29.7543   5.31 231.8   19
   90.0   89.2   8.5793   0.137  29.7787   5.33 232.5   17
   91.0   90.2   8.5815   0.121  29.7818   5.35 233.4   19
   92.0   91.2   8.5836   0.121  29.7827   5.34 233.1   18
   93.0   92.2   8.5848   0.114  29.7832   5.33 232.7   19
   94.0   93.2   8.5877   0.215  29.7847   5.34 233.0   16
   95.0   94.2   8.5884   0.123  29.7883   5.35 233.6   20
   96.0   95.1   8.5808   0.131  29.7930   5.34 233.1   16
   97.0   96.2   8.5616   0.115  29.8049   5.32 232.2   19
   98.0   97.1   8.5044   0.138  29.8150   5.29 230.8   17
   99.0   98.1   8.4673   0.175  29.8130   5.24 228.8   19
  100.0   99.1   8.4632   0.106  29.8127   5.24 228.5   17
  101.0  100.1   8.4564   0.106  29.8125   5.25 228.9   17
  102.0  101.1   8.4521   0.100  29.8128   5.23 228.4   20
  103.0  102.1   8.4482   0.106  29.8191   5.22 227.8   15
  104.0  103.1   8.4428   0.113  29.8257   5.21 227.3   21
  105.0  104.1   8.4420   0.105  29.8260   5.20 226.9   14
  106.0  105.1   8.4368   0.114  29.8286   5.18 226.2   21
  107.0  106.1   8.4308   0.114  29.8321   5.16 225.1   17
  108.0  107.1   8.4223   0.107  29.8410   5.13 224.1   19
  109.0  108.0   8.4097   0.114  29.8501   5.09 222.2   16
  110.0  109.0   8.3946   0.107  29.8568   5.03 219.6   20
  111.0  110.0   8.3854   0.122  29.8608   4.98 217.3   16
  112.0  111.0   8.3803   0.114  29.8627   4.95 216.0   18
  113.0  112.0   8.3654   0.125  29.8672   4.91 214.3   18
  114.0  113.0   8.3482   0.118  29.8722   4.88 213.0   18
  115.0  114.0   8.3468   0.131  29.8738   4.87 212.6   18
  116.0  115.0   8.3465   0.327  29.8779   4.88 212.7   17
  117.0  116.0   8.3465   0.124  29.8806   4.88 212.8   18
  118.0  117.0   8.3456   0.134  29.8845   4.87 212.3   19
  119.0  117.9   8.3443   0.132  29.8947   4.86 212.0   16
  120.0  119.0   8.3445   0.129  29.9060   4.84 211.3   18
  121.1  120.0   8.3460   0.144  29.9135   4.81 210.0   22