*2017/11/27 15:47:02.15
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2017/05/08 18:54:04.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 98
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : B97813FF
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.153          97.856
       2 Depth                      metres          1.143          97.003
       3 Temperature:Primary        'deg C (ITS90)' 9.241          10.2406
       4 Fluorescence:URU:Wetlabs   mg/m^3          1.169          4.143
       5 Salinity:T0:C0             PSS-78          25.099         29.9536
       6 Oxygen:Dissolved:SBE       mL/L            5.736          7.134
       7 Oxygen:Dissolved:SBE       umol/kg         250.2815       312.4831
       8 Number_of_bin_records      n/a             11             24
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2017-26\Pro
    $END

*ADMINISTRATION
    MISSION             : 2017-26
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Neocaligus

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : SPONGEBOB
    EVENT NUMBER        : 4
    LATITUDE            :  48  42.00000 N  ! (deg min)
    LONGITUDE           : 123  15.30000 W  ! (deg min)
    WATER DEPTH         : 342

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 1123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             4888
        Conductivity                       ' '             4513
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             3234
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SOFTWAREVERSION>1.0</SOFTWAREVERSION>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.5.2  2017/11/24 12:03:54      5801      5801
        CLEAN    5.2.2  2017/11/24 12:53:25      5801      5801
        CLIP     1.3    2017/11/24 12:53:38      5801      3952
        SHIFTDAT 3.4    2017/11/24 12:53:50      3952      3952
        DELETE   6.3    2017/11/24 12:54:12      3952      1855
        CTDEDIT  5.2.3  2017/11/24 16:02:30      1855      1643
        CALIB    11.9   2017/11/27 13:57:41      1643      1643
        FILTERS  4.3    2017/11/27 13:58:20      1643      1643
        BINAVE   4.2    2017/11/27 13:58:27      1643        98
        REMOVECH 8.2    2017/11/27 13:59:23        98        98
        CHGUNITS 3.1.1  2017/11/27 13:59:37        98        98
        REORDER  1.3.1  2017/11/27 14:06:44 ?         ?
        HDREDIT2 3.1.1  2017/11/27 15:47:02 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2017/11/24 12:53:25 20
         Reset #RECS, MIN & MAX values in header.
         Delete Empty Channels:     0 deleted.
         Set event to last  4 characters of file name
         Set header Start and End times from the data. *FAILED*
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1850,100000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.20
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   7 points) will be deleted.
         Drop rate applies in the range    10.00 to    89.17 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2017/11/24 16:02:30
            212 records were deleted in this editing session.
         No data values were changed.
        -CALIB parameters: 2017/11/27 13:57:41
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2017-26\Processing\doc\2017-26-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.4130000E-01  0.1048400E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =    5
         The following channel(s) were filtered.
           Fluorescence:URU:Wetlabs:ECO-AFL
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2017/11/27 13:59:23
         The following CHANNEL(S) were removed:
          Scan_Number
          Conductivity:Primary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temp*
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2017/11/27 15:47:02
         Applied edit header: P:\Cruise_Data_Processing\2017-26\Processing\doc\2017-26-HDR.TXT
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** * Latitude: 48 42.0 N
      ** * Longitude: 123 15.3 W
      ** * Station: SpongeBob
      ** * Depth: 342 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2017-05-08T18:54:01</DateTime>
               <EventSummary numEvents='169'/>
               <Power>
                  <vBattery>16.2</vBattery>
                  <vExternal>0.2</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>61.0</iSys>
                  <iCPU>14.4</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>15826944</Bytes>
                  <BytesFree>1961459712</BytesFree>
                  <Samples>219818</Samples>
                  <SamplesFree>27242496</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-4888</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>04-4513</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>43-3234</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='169'/>
               <Event type='Console Suppress' count='8'/>
               <Event type='Power On Reset' count='161'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2017-05-08T18:54:04</startTime>
            <Data>
    # nquan = 11
    # nvalues = 5801
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       5801
    # span 1 =      0.033,     99.173
    # span 2 =      0.033,     98.308
    # span 3 =     9.2393,    13.0790
    # span 4 =   0.104824,   3.252306
    # span 5 =    -0.4030,    64.5970
    # span 6 =     2.0880,     2.5330
    # span 7 =     -1.012,      1.460
    # span 8 =     0.6864,    29.9543
    # span 9 =     5.4122,     7.2498
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = May 08 2017 18:54:04 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4888</SerialNumber>
    #       <CalibrationDate>07-Nov-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.32597248e-003</G>
    #       <H>6.34179463e-004</H>
    #       <I>2.16751589e-005</I>
    #       <J>1.98413605e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>4513</SerialNumber>
    #       <CalibrationDate>28-Oct-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.70547606e+000</G>
    #         <H>1.47193126e+000</H>
    #         <I>1.76526613e-004</I>
    #         <J>5.97689162e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>3234</SerialNumber>
    #       <CalibrationDate>03-Nov-15</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>5.3831e-001</Soc>
    #         <offset>-0.5530</offset>
    #         <A>-3.6948e-003</A>
    #         <B> 1.5409e-004</B>
    #         <C>-2.3179e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.1700</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Nov 24 2017 11:56:11, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2017-26\RAW\CTD\2017-26-0004.xml P:\Crui
    se_Data_Processing\2017-26\Processing\doc\2017-26-ctd.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wfilter_date = Nov 24 2017 11:59:21, 7.23.2
    # wfilter_in = P:\Cruise_Data_Processing\2017-26\Processing\convert\2017-26-0004
    .cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action prdM = cosine, 7
    # wfilter_action depSM = cosine, 7
    # wfilter_action t090C = cosine, 7
    # wfilter_action c0S/m = cosine, 7
    # alignctd_date = Nov 24 2017 12:00:14, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2017-26\Processing\wfilter\2017-26-000
    4.cnv
    # alignctd_adv = sbeox0V 2.000
    # celltm_date = Nov 24 2017 12:01:05, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2017-26\Processing\align\2017-26-0004.cn
    v
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 24 2017 12:01:48, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2017-26\Processing\celltm\2017-26-0004.c
    nv P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-ctd2.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove a few surface records and records corrupted
     by shed wakes near the bottom of the cast.

    Data Processing Notes:
    ----------------------
    Dissolved Oxygen and Fluorescence are nominal and unedited, except
      that some  records were removed in editing temperature and salinity.
      Fluorescence was removed from file #1 because the cap was left on.

    While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore.

    There was no salinity calibration sampling during this cruise. There was such
      sampling during previous cruises using the same sensors and the CTD salinity
      compared well with botttles. Damage to the conductivity cell was discovered after
      this cruise. The salinity from 2 deep casts compares well with a cruise run
      about 2 weeks later in the same area using a different conductivity sensor.
      The calibration appears to be good, so the damage likely occurred in off-loading
      or transport after this cruise.

    There was no dissolved oxygen calibration sampling, so the recalibration used for
      cruise 2017-01 was applied to these data since the same sensor was used and
      calibration sampling was extensive.

    For details on the processing see processing report: 2017-26-Processing_Report.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0.413E-01 1.0484)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- -8--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Numb
!re            ure:     cence:  :T0:C0   :      n:    er_o
!              Primary  URU:             Dissol Disso ~bin
!                       Wetlabs          ved:   lved: _rec
!                                        SBE    SBE   ords
!------ ------ -------- ------- -------- ------ ----- ----
*END OF HEADER
    1.2    1.1  10.2406   2.743  25.0990   7.13 312.5   12
    2.0    2.0  10.0394   2.889  25.8878   6.93 303.4   13
    3.0    3.0   9.9620   3.169  26.2407   6.78 296.5   11
    4.0    4.0   9.8671   3.367  26.6814   6.64 290.6   12
    5.0    4.9   9.8043   3.983  26.9449   6.51 284.6   15
    6.0    6.0   9.6838   4.140  27.5251   6.41 280.4   11
    7.0    7.0   9.6476   3.999  27.7008   6.36 278.0   13
    8.0    7.9   9.6345   4.089  27.7806   6.33 276.5   14
    9.0    8.9   9.6075   4.143  27.9124   6.31 275.8   11
   10.0    9.9   9.5711   3.750  28.0885   6.29 274.8   13
   11.0   10.9   9.5593   3.643  28.1360   6.26 273.7   13
   12.0   11.9   9.5099   3.469  28.3689   6.23 272.4   11
   13.0   12.9   9.4903   3.135  28.4685   6.20 270.7   13
   14.0   13.9   9.4720   3.142  28.5670   6.16 269.2   13
   15.0   14.9   9.4645   2.895  28.6188   6.15 268.7   16
   16.0   15.8   9.4617   2.859  28.6426   6.15 268.8   18
   17.0   16.9   9.4598   2.857  28.6615   6.17 269.7   16
   18.0   17.9   9.4536   2.836  28.7255   6.17 269.6   19
   19.0   18.8   9.4399   2.809  28.8161   6.14 268.1   14
   20.0   19.9   9.4278   2.600  28.8986   6.12 267.3   19
   21.0   20.8   9.4050   2.697  29.0377   6.09 266.0   15
   22.0   21.8   9.3859   2.409  29.1555   6.06 264.6   18
   23.0   22.8   9.3756   2.320  29.1935   6.04 263.7   16
   24.0   23.8   9.3668   2.254  29.2252   6.03 263.2   17
   25.0   24.8   9.3667   2.206  29.2269   6.02 262.6   16
   26.0   25.8   9.3601   2.074  29.2542   6.02 262.7   16
   27.0   26.7   9.3513   2.320  29.2912   5.99 261.6   19
   28.0   27.8   9.3348   2.038  29.3698   5.97 260.5   14
   29.0   28.7   9.3314   1.935  29.3942   5.95 259.9   19
   30.0   29.7   9.3297   1.766  29.4114   5.93 259.0   15
   31.0   30.7   9.3295   1.820  29.4144   5.94 259.4   19
   32.0   31.7   9.3282   1.951  29.4389   5.96 260.0   16
   33.0   32.7   9.3292   1.851  29.4557   5.95 259.6   18
   34.0   33.7   9.3301   1.785  29.4619   5.95 259.5   17
   35.0   34.7   9.3308   1.808  29.5196   5.95 259.5   18
   36.0   35.7   9.3264   1.826  29.5926   5.93 258.8   17
   37.0   36.7   9.3258   1.768  29.5947   5.91 258.0   17
   38.0   37.7   9.3256   1.805  29.5946   5.92 258.4   19
   39.0   38.7   9.3230   1.755  29.6029   5.91 257.8   17
   40.0   39.6   9.3219   1.678  29.6044   5.89 257.2   19
   41.0   40.6   9.3219   1.788  29.6039   5.89 257.3   17
   42.0   41.6   9.3197   1.815  29.6119   5.89 257.1   19
   43.0   42.7   9.3240   1.728  29.6005   5.90 257.4   17
   44.0   43.6   9.3250   1.661  29.5991   5.90 257.5   18
   45.0   44.6   9.3227   1.562  29.6063   5.89 257.1   18
   46.0   45.6   9.3173   1.732  29.6224   5.89 256.9   19
   47.0   46.6   9.3228   1.796  29.6079   5.89 257.1   18
   48.0   47.6   9.3270   1.628  29.5954   5.91 257.9   18
   49.0   48.6   9.3264   1.743  29.5982   5.91 257.9   19
   50.0   49.6   9.3269   1.824  29.5967   5.91 258.0   18
   51.0   50.6   9.3270   1.733  29.5955   5.89 257.2   20
   52.0   51.6   9.3268   1.825  29.5955   5.90 257.5   19
   53.0   52.5   9.3266   1.907  29.5963   5.90 257.6   19
   54.0   53.6   9.3254   1.886  29.5993   5.88 256.7   18
   55.0   54.5   9.3222   1.727  29.6065   5.88 256.4   18
   56.0   55.5   9.3180   1.668  29.6183   5.86 255.7   19
   57.0   56.5   9.3028   1.684  29.6687   5.84 254.9   17
   58.0   57.5   9.3001   1.688  29.6793   5.84 254.8   19
   59.0   58.5   9.2990   1.674  29.6839   5.84 255.0   17
   60.0   59.5   9.2998   1.526  29.6816   5.84 255.0   19
   61.0   60.5   9.3015   1.502  29.6758   5.84 254.7   18
   62.0   61.5   9.2914   1.686  29.7135   5.82 254.0   19
   63.0   62.5   9.2884   1.505  29.7250   5.81 253.7   17
   64.0   63.4   9.2743   1.549  29.7842   5.81 253.4   18
   65.0   64.5   9.2638   1.459  29.8275   5.79 252.7   18
   66.0   65.4   9.2640   1.437  29.8263   5.78 252.3   17
   67.0   66.4   9.2644   1.373  29.8256   5.78 252.1   18
   68.0   67.4   9.2635   1.381  29.8319   5.77 251.9   18
   69.0   68.4   9.2632   1.417  29.8350   5.78 252.3   19
   70.0   69.4   9.2622   1.410  29.8398   5.78 252.4   17
   71.0   70.4   9.2629   1.449  29.8379   5.77 251.9   19
   72.0   71.4   9.2634   1.364  29.8349   5.77 251.9   18
   73.0   72.4   9.2639   1.432  29.8315   5.78 252.1   19
   74.0   73.4   9.2639   1.501  29.8314   5.79 252.6   17
   75.0   74.4   9.2634   1.451  29.8346   5.79 252.7   18
   76.0   75.3   9.2633   1.355  29.8397   5.77 251.9   17
   77.0   76.3   9.2605   1.380  29.8685   5.75 251.0   18
   78.0   77.3   9.2592   1.334  29.8909   5.76 251.4   17
   79.0   78.3   9.2607   1.527  29.8715   5.78 252.3   18
   80.0   79.3   9.2607   1.385  29.8878   5.77 251.7   17
   81.0   80.3   9.2609   1.477  29.8912   5.75 251.1   18
   82.0   81.3   9.2605   1.504  29.8922   5.75 251.1   17
   83.0   82.3   9.2588   1.457  29.9035   5.77 251.9   18
   84.0   83.3   9.2582   1.466  29.9071   5.78 252.1   17
   85.0   84.3   9.2578   1.375  29.9107   5.77 251.7   17
   86.0   85.2   9.2574   1.338  29.9102   5.76 251.5   16
   87.0   86.2   9.2555   1.419  29.9169   5.78 252.0   17
   88.0   87.3   9.2508   1.330  29.9277   5.76 251.2   17
   89.0   88.2   9.2475   1.400  29.9351   5.76 251.2   15
   90.0   89.2   9.2471   1.369  29.9343   5.77 251.6   16
   91.0   90.2   9.2443   1.389  29.9413   5.76 251.4   18
   92.0   91.2   9.2418   1.169  29.9497   5.75 250.8   16
   93.0   92.2   9.2417   1.200  29.9504   5.74 250.6   17
   94.0   93.2   9.2417   1.344  29.9509   5.74 250.4   15
   95.0   94.1   9.2410   1.408  29.9536   5.74 250.3   17
   96.0   95.2   9.2427   1.174  29.9503   5.75 250.9   15
   97.0   96.1   9.2447   1.458  29.9455   5.76 251.2   11
   97.9   97.0   9.2456   1.373  29.9439   5.76 251.2   24