*2017/11/20 11:15:02.37
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2017/09/01 15:16:31.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 61
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 3F60E0CD
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         0.787          61.016
       2 Depth                      metres          0.78           60.489
       3 Temperature:Primary        'deg C (ITS90)' 11.0792        13.7784
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.389          4.539
       5 Salinity:T0:C0             PSS-78          28.032         30.1214
       6 Oxygen:Dissolved:SBE       mL/L            3.866          5.499
       7 Oxygen:Dissolved:SBE       umol/kg         168.7145       240.4762
       8 Number_of_bin_records      n/a             12             43
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2017-07\Pro
    $END

*ADMINISTRATION
    MISSION             : 2017-07
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Salacia

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : GI-01
    EVENT NUMBER        : 200
    LATITUDE            :  48  45.85400 N  ! (deg min)
    LONGITUDE           : 123  20.56900 W  ! (deg min)
    WATER DEPTH         : 65

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 1123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             4888
        Conductivity                       ' '             3396
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             3234
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SOFTWAREVERSION>1.0</SOFTWAREVERSION>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.5.2  2017/11/14 16:41:19      5183      5183
        CLEAN    5.2.2  2017/11/14 16:41:41 ?         ?
        CLIP     1.3    2017/11/15 11:12:19      5183      3264
        SHIFTDAT 3.4    2017/11/15 12:14:30      3264      3264
        DELETE   6.3    2017/11/15 13:14:28      3264      1253
        CTDEDIT  5.2.3  2017/11/20 09:20:08      1253      1216
        CALIB    11.9   2017/11/20 09:39:19      1216      1216
        BINAVE   4.2    2017/11/20 09:53:22      1216        61
        REMOVECH 8.2    2017/11/20 10:14:12        61        61
        CHGUNITS 3.1.1  2017/11/20 10:14:34        61        61
        REORDER  1.3.1  2017/11/20 10:31:40 ?         ?
        HDREDIT2 3.1.1  2017/11/20 11:15:02 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2017/11/14 16:40:58 20
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1920,100000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary [S/m]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.20
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    51.41 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2017/11/20 09:20:08
             37 records were deleted in this editing session.
         No data values were changed.
        -CALIB parameters: 2017/11/20 09:39:19
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.4130000E-01  0.1048400E+01
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2017/11/20 10:14:12
         The following CHANNEL(S) were removed:
          Scan_Number
          Conductivity:Primary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2017/11/20 11:15:02
         Applied edit header: P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-HDR.TXT
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** * Latitude: 48 45.854 N
      ** * Longitude: 123 20.569 W
      ** * Station: GI-01
      ** * Depth: 65 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2017-09-01T15:16:28</DateTime>
               <EventSummary numEvents='278'/>
               <Power>
                  <vBattery>17.0</vBattery>
                  <vExternal>0.4</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>56.2</iSys>
                  <iCPU>14.2</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>246185984</Bytes>
                  <BytesFree>1731100672</BytesFree>
                  <Samples>3419249</Samples>
                  <SamplesFree>24043064</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-4888</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>3396</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>43-3234</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='278'/>
               <Event type='Console Suppress' count='12'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2017-09-01T15:16:31</startTime>
            <Data>
    # nquan = 11
    # nvalues = 5183
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       5183
    # span 1 =      0.018,     61.412
    # span 2 =      0.018,     60.881
    # span 3 =    10.8340,    13.7984
    # span 4 =   0.166506,   3.457016
    # span 5 =    -0.4030,    49.2384
    # span 6 =     1.5924,     2.7647
    # span 7 =     -0.959,      1.059
    # span 8 =     1.0965,    30.3919
    # span 9 =     3.2767,     7.0830
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Sep 01 2017 15:16:31 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4888</SerialNumber>
    #       <CalibrationDate>07-Nov-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.32597248e-003</G>
    #       <H>6.34179463e-004</H>
    #       <I>2.16751589e-005</I>
    #       <J>1.98413605e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>22-Dec-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91552244e+000</G>
    #         <H>1.31333188e+000</H>
    #         <I>2.80240861e-004</I>
    #         <J>4.41173417e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>3234</SerialNumber>
    #       <CalibrationDate>03-Nov-15</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>5.3831e-001</Soc>
    #         <offset>-0.5530</offset>
    #         <A>-3.6948e-003</A>
    #         <B> 1.5409e-004</B>
    #         <C>-2.3179e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.1700</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Nov 14 2017 09:59:20, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2017-07\RAW\CTD\2017-07-0200.xml P:\Crui
    se_Data_Processing\2017-07\Processing\doc\2017-07-ctd2.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wfilter_date = Nov 14 2017 14:51:48, 7.23.2
    # wfilter_in = P:\Cruise_Data_Processing\2017-07\Processing\convert\2017-07-0200
    .cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action prdM = cosine, 7
    # wfilter_action depSM = cosine, 7
    # wfilter_action t090C = cosine, 7
    # wfilter_action c0S/m = cosine, 7
    # alignctd_date = Nov 14 2017 15:11:20, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2017-07\Processing\wfilter\2017-07-020
    0.cnv
    # alignctd_adv = sbeox0V 2.000
    # celltm_date = Nov 14 2017 15:13:06, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2017-07\Processing\align\2017-07-0200.cn
    v
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 14 2017 15:15:23, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2017-07\Processing\celltm\2017-07-0200.c
    nv P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-ctd2.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove surface records and records corrupted by shed
     wakes near the bottom of the cast.

    Data Processing Notes:
    ----------------------
    Dissolved Oxygen and Fluorescence are nominal and unedited, except
      that some  records were removed in editing temperature and salinity.

    While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore. It is suggested that extracted chlorophyll values be
      checked where available.

    Comparison with bottles suggests that the CTD salinity is reasonably close to bottle
      salinity for both conductivity sensors, but there is a large scatter and flushing of
      Niskin bottles is likely incomplete. No recalibration was applied.

    There was no dissolved oxygen calibration sampling, so the recalibration used for
      cruise 2017-01 was applied to these data since the same sensor was used and
      calibration sampling was extensive.

    For details on the processing see processing report: 2017-07-proc.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0.413E-01 1.0484)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- -8--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Numb
!re            ure:     cence:  :T0:C0   :      n:    er_o
!              Primary  URU:             Dissol Disso ~bin
!                       Wetlabs          ved:   lved: _rec
!                                        SBE    SBE   ords
!------ ------ -------- ------- -------- ------ ----- ----
*END OF HEADER
    0.8    0.8  13.7784   3.869  28.0320   5.50 240.5   43
    2.1    2.1  13.7596   4.140  28.0415   5.48 239.6   12
    3.0    3.0  13.7284   4.364  28.0589   5.44 238.0   22
    4.0    4.0  13.6812   4.483  28.0879   5.39 235.7   19
    5.0    5.0  13.6081   4.539  28.1325   5.31 232.4   18
    6.0    5.9  13.4687   4.227  28.2165   5.20 227.2   22
    7.0    6.9  13.3447   4.065  28.2924   5.13 224.3   19
    8.0    8.0  13.2829   3.818  28.3293   5.12 224.0   18
    9.0    8.9  13.2789   3.725  28.3314   5.13 224.2   23
   10.0    9.9  13.2635   3.574  28.3410   5.11 223.3   18
   11.0   11.0  13.2349   3.548  28.3589   5.11 223.2   21
   12.0   11.9  13.2347   3.426  28.3593   5.12 223.6   20
   13.0   12.9  13.2222   3.358  28.3674   5.06 221.2   17
   14.0   13.9  13.0397   3.367  28.4845   4.95 216.5   23
   15.0   14.8  12.8895   2.883  28.5790   4.86 212.5   18
   16.0   15.9  12.7908   2.822  28.6415   4.79 209.5   18
   17.0   16.9  12.6744   2.629  28.7168   4.73 206.8   23
   18.0   17.8  12.4979   2.232  28.8297   4.67 204.1   17
   19.1   18.9  12.4532   2.115  28.8604   4.65 203.1   18
   20.0   19.8  12.4582   2.205  28.8583   4.67 203.9   23
   21.0   20.8  12.4602   2.224  28.8595   4.65 203.2   18
   22.0   21.8  12.4282   2.086  28.8828   4.62 201.8   18
   23.0   22.8  12.3988   2.092  28.9046   4.60 200.9   22
   24.0   23.8  12.3654   1.943  28.9271   4.56 199.3   16
   25.0   24.8  12.2572   1.882  28.9991   4.52 197.5   20
   26.0   25.8  12.1703   1.750  29.0477   4.46 194.9   21
   27.0   26.8  12.0935   1.610  29.0930   4.42 193.3   18
   28.0   27.8  12.0695   1.476  29.1094   4.41 192.6   19
   29.0   28.8  12.0506   1.452  29.1208   4.40 192.4   19
   30.0   29.7  12.0376   1.472  29.1274   4.40 192.2   19
   31.0   30.7  12.0132   1.426  29.1442   4.39 191.6   21
   32.0   31.7  12.0048   1.426  29.1539   4.37 191.1   19
   33.0   32.7  11.9748   1.330  29.1932   4.36 190.4   19
   34.0   33.7  11.9343   1.230  29.2422   4.33 188.9   20
   35.0   34.7  11.8698   1.200  29.3201   4.28 187.0   18
   36.0   35.7  11.7568   1.031  29.4737   4.22 184.3   22
   37.0   36.7  11.6978   0.814  29.5616   4.14 180.9   20
   38.0   37.7  11.5776   0.711  29.6656   4.10 179.0   18
   39.0   38.7  11.5111   0.689  29.7262   4.07 177.9   20
   40.0   39.6  11.4820   0.671  29.7513   4.06 177.2   20
   41.0   40.6  11.4534   0.618  29.7771   4.06 177.1   20
   42.0   41.6  11.4487   0.643  29.7817   4.05 176.9   21
   43.0   42.6  11.4367   0.669  29.7924   4.04 176.6   18
   44.0   43.6  11.4293   0.647  29.7986   4.04 176.4   20
   45.0   44.6  11.4234   0.631  29.8022   4.04 176.4   20
   46.0   45.6  11.4237   0.636  29.8024   4.05 176.6   20
   47.0   46.6  11.4233   0.580  29.8041   4.04 176.6   20
   48.0   47.6  11.4293   0.573  29.8017   4.05 176.7   19
   49.0   48.6  11.4265   0.565  29.8027   4.05 176.9   20
   50.0   49.6  11.4196   0.606  29.8052   4.06 177.1   19
   51.0   50.6  11.4087   0.604  29.8137   4.05 177.0   21
   52.0   51.6  11.4004   0.552  29.8219   4.05 176.7   20
   53.0   52.6  11.3975   0.558  29.8248   4.03 176.1   18
   54.0   53.5  11.3919   0.566  29.8305   4.03 175.7   19
   55.0   54.5  11.3869   0.546  29.8376   4.02 175.6   20
   56.0   55.5  11.3729   0.554  29.8535   4.02 175.3   19
   57.0   56.5  11.3657   0.572  29.8627   4.00 174.6   20
   58.0   57.5  11.3362   0.520  29.8936   3.98 173.9   21
   59.0   58.5  11.2633   0.405  29.9567   3.95 172.3   18
   60.0   59.5  11.1969   0.389  30.0152   3.90 170.4   19
   61.0   60.5  11.0792   0.415  30.1214   3.87 168.7   25