*2017/11/20 11:15:01.67
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2017/08/18 15:46:27.000
    TIME INCREMENT      : 0 0 0 0.625E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 60
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : D5493B6
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         1.971          60.589
       2 Depth                      metres          1.954          60.066
       3 Temperature:Primary        'deg C (ITS90)' 10.6994        13.7064
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.248          6.892
       5 Salinity:T0:C0             PSS-78          28.2487        30.2881
       6 Oxygen:Dissolved:SBE       mL/L            3.163          5.422
       7 Oxygen:Dissolved:SBE       umol/kg         138.0091       237.0669
       8 Number_of_bin_records      n/a             9              25
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        7  F       ' '     1
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2017-07\Pro
    $END

*ADMINISTRATION
    MISSION             : 2017-07
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia Zooplankton
    SCIENTIST           : Young K.
    PLATFORM            : Salacia

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : CBE2
    EVENT NUMBER        : 167
    LATITUDE            :  48  44.26600 N  ! (deg min)
    LONGITUDE           : 123  34.54800 W  ! (deg min)
    WATER DEPTH         : 60

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE25plus
    SERIAL NUMBER       : 1123

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             4888
        Conductivity                       ' '             3396
        'Pressure:Strain Gauge'            ' '             1123
        'Oxygen:SBE 43'                    ' '             3234
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             FLRTD-2214
    $END
    $REMARKS
        <SOFTWAREVERSION>1.0</SOFTWAREVERSION>
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.5.2  2017/11/14 16:40:57      4719      4719
        CLEAN    5.2.2  2017/11/14 16:41:33 ?         ?
        CLIP     1.3    2017/11/15 11:12:10      4719      2800
        SHIFTDAT 3.4    2017/11/15 12:14:23      2800      2800
        DELETE   6.3    2017/11/15 13:14:22      2800      1330
        CTDEDIT  5.2.3  2017/11/17 16:45:49      1330      1259
        CALIB    11.9   2017/11/20 09:39:16      1259      1259
        BINAVE   4.2    2017/11/20 09:53:21      1259        60
        REMOVECH 8.2    2017/11/20 10:14:11        60        60
        CHGUNITS 3.1.1  2017/11/20 10:14:33        60        60
        REORDER  1.3.1  2017/11/20 10:31:39 ?         ?
        HDREDIT2 3.1.1  2017/11/20 11:15:01 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2017/11/14 16:40:58 20
         Set event to last  4 characters of file name
        -The following CLIP parameters were used.
         Clip by Record Number Limits
         First Record,Last Record =   1920,100000
         Time Not Available in File
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary [S/m]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.20
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over   5 points) will be deleted.
         Drop rate applies in the range    10.00 to    50.72 dbars
         Sample interval (from FILE section of header) =     0.062 seconds.
        -CTDEDIT  v5.2.3   2017/11/17 16:45:49
             71 records were deleted in this editing session.
         No data values were changed.
        -CALIB parameters: 2017/11/20 09:39:16
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         10 Oxygen:Dissolved:SBE          mL/L       10  0.4130000E-01  0.1048400E+01
        -The following BINAVE parameters were used:
         Bin channel = Press*
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2017/11/20 10:14:11
         The following CHANNEL(S) were removed:
          Scan_Number
          Conductivity:Primary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2017/11/20 11:15:01
         Applied edit header: P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-HDR.TXT
         Channel  2: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
    $END

*COMMENTS
    SBE HEADER
      <SBEDataUploadFile>
      <![CDATA[
      ** * Latitude: 48 44.266 N
      ** * Longitude: 123 34.548 W
      ** * Station: CBE-2
      ** * Depth: 60 m
      ]]>
         <ApplicationData>
            <firmware>
               <SoftwareVersion>1.0</SoftwareVersion>
               <BuildDate>Dec  1 2012 10:43:42</BuildDate>
               </firmware>
            </ApplicationData>
         <InstrumentState>
            <StatusData DeviceType='SBE25plus' SerialNumber='0251123'>
               <DateTime>2017-08-18T15:46:24</DateTime>
               <EventSummary numEvents='278'/>
               <Power>
                  <vBattery>17.4</vBattery>
                  <vExternal>0.4</vExternal>
                  <vLithium>7.3</vLithium>
                  <vRTC>3.3</vRTC>
                  <iExt>0.0</iExt>
                  <iSys>56.2</iSys>
                  <iCPU>12.7</iCPU>
                  </Power>
               <MemorySummary>
                  <Bytes>230948864</Bytes>
                  <BytesFree>1746337792</BytesFree>
                  <Samples>3207623</Samples>
                  <SamplesFree>24254691</SamplesFree>
                  <Files>0</Files>
                  <CastFiles>0</CastFiles>
                  </MemorySummary>
               </StatusData>
            <HardwareData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
               <FirmwareVersion>1.0</FirmwareVersion>
               <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
               <CommandSetVersion>1.0</CommandSetVersion>
               <PCBAssembly PCBSerialNum='96375' AssemblyNum='41842C'/>
               <PCBAssembly PCBSerialNum='96376' AssemblyNum='41843D'/>
               <MfgDate>2015-10-29T13:15:10</MfgDate>
               <InternalSensors>
                  <Sensor id='Main Temperature'>
                     <type>temperature-0</type>
                     <SerialNum>03-4888</SerialNum>
                     </Sensor>
                  <Sensor id='Main Conductivity'>
                     <type>conductivity-0</type>
                     <SerialNum>3396</SerialNum>
                     </Sensor>
                  <Sensor id='Main Pressure'>
                     <Type>strain-0</Type>
                     <SerialNum>4708555</SerialNum>
                     </Sensor>
                  </InternalSensors>
               <ExternalSensors>
                  <Sensor id='volt 0'>
                     <Type>OXY</Type>
                     <SerialNum>43-3234</SerialNum>
                     </Sensor>
                  <Sensor id='volt 1'>
                     <Type>CHL</Type>
                     <SerialNum>ECO 2214</SerialNum>
                     </Sensor>
                  <Sensor id='volt 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 3'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 4'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 5'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 6'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='volt 7'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 1'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  <Sensor id='serial 2'>
                     <Type>NONE</Type>
                     <SerialNum>NONE</SerialNum>
                     </Sensor>
                  </ExternalSensors>
               </HardwareData>
            <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251123'>
               <Serial>
                  <SerialPort0>
                     <baudconsole>115200</baudconsole>
                     <echoconsole>1</echoconsole>
                     </SerialPort0>
                  <SerialPort1>
                     <enableser1>0</enableser1>
                     <nameser1>ser1</nameser1>
                     <baudser1>9600</baudser1>
                     <inlineser1>1</inlineser1>
                     <promptser1>S></promptser1>
                     <measstringser1>ts</measstringser1>
                     <measintervalser1>0</measintervalser1>
                     <startstringser1>start</startstringser1>
                     <execcharser1>254</execcharser1>
                     <termcharser1>254</termcharser1>
                     <suppressser1>1</suppressser1>
                     <timeoutser1>3</timeoutser1>
                     <failoutser1>60</failoutser1>
                     </SerialPort1>
                  <SerialPort2>
                     <enableser2>0</enableser2>
                     <nameser2>ser2</nameser2>
                     <baudser2>9600</baudser2>
                     <inlineser2>1</inlineser2>
                     <promptser2>S></promptser2>
                     <measstringser2>ts</measstringser2>
                     <measintervalser2>0</measintervalser2>
                     <startstringser2>start</startstringser2>
                     <execcharser2>254</execcharser2>
                     <termcharser2>254</termcharser2>
                     <suppressser2>1</suppressser2>
                     <timeoutser2>3</timeoutser2>
                     <failoutser2>60</failoutser2>
                     </SerialPort2>
                  </Serial>
               <Settings>
                  <vauxdelay0>0</vauxdelay0>
                  <vauxdelay1>0</vauxdelay1>
                  <vauxdelay2>0</vauxdelay2>
                  <vauxdelay3>0</vauxdelay3>
                  <mincondfreq>2800</mincondfreq>
                  <pumpdelay>45</pumpdelay>
                  <executedtag>1</executedtag>
                  </Settings>
               <RealTimeOutput>
                  <outputformat>0</outputformat>
                  <historicrate>1</historicrate>
                  <vout0>1</vout0>
                  <vout1>1</vout1>
                  <vout2>0</vout2>
                  <vout3>0</vout3>
                  <vout4>0</vout4>
                  <vout5>0</vout5>
                  <vout6>0</vout6>
                  <vout7>0</vout7>
                  <outputrate>8</outputrate>
                  </RealTimeOutput>
               </ConfigurationData>
            <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251123'>
               <Calibration format='STRAIN0' id='Main Pressure'>
                  <SerialNum>4708555</SerialNum>
                  <Pcaldate>2015-11-11</Pcaldate>
                  <PA0>6.961122e-01</PA0>
                  <PA1>5.499725e-04</PA1>
                  <PA2>1.531754e-13</PA2>
                  <PTEMPA0>-9.283356e+01</PTEMPA0>
                  <PTEMPA1>4.149143e+01</PTEMPA1>
                  <PTEMPA2>1.528701e+00</PTEMPA2>
                  <PTCA0>8.370818e+06</PTCA0>
                  <PTCA1>-8.596546e+01</PTCA1>
                  <PTCA2>5.906569e+00</PTCA2>
                  <PTCB0>1.040725e+02</PTCB0>
                  <PTCB1>-8.961324e-03</PTCB1>
                  <PTCB2>0.000000e+00</PTCB2>
                  <Poffset>0.000000e+00</Poffset>
                  <Pfullscale>2.900000e+03</Pfullscale>
                  </Calibration>
               </CalibrationCoefficients>
            <EventCounter DeviceType='SBE25plus' SerialNumber='0251123'>
               <EventSummary numEvents='278'/>
               <Event type='Console Suppress' count='12'/>
               <Event type='Error16' count='11'/>
               <Event type='Power On Reset' count='255'/>
               </EventCounter>
            </InstrumentState>
         <InstrumentRawData>
            <startTime>2017-08-18T15:46:27</startTime>
            <Data>
    # nquan = 11
    # nvalues = 4719
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prdM: Pressure, Strain Gauge [db]
    # name 2 = depSM: Depth [salt water, m], lat = 49.00
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = dz/dtM: Descent Rate [m/s]
    # name 8 = sal00: Salinity, Practical [PSU]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = flag: flag
    # span 0 =          1,       4719
    # span 1 =     -0.157,     60.717
    # span 2 =     -0.156,     60.194
    # span 3 =    10.6983,    16.0372
    # span 4 =   0.077689,   3.491427
    # span 5 =    -0.4030,    64.5970
    # span 6 =     1.4362,     2.4182
    # span 7 =     -0.877,      0.852
    # span 8 =     0.4673,    30.2908
    # span 9 =     2.9685,     6.6643
    # span 10 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0625
    # start_time = Aug 18 2017 15:46:27 [Instrument's time stamp, header]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4888</SerialNumber>
    #       <CalibrationDate>07-Nov-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.32597248e-003</G>
    #       <H>6.34179463e-004</H>
    #       <I>2.16751589e-005</I>
    #       <J>1.98413605e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>22-Dec-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91552244e+000</G>
    #         <H>1.31333188e+000</H>
    #         <I>2.80240861e-004</I>
    #         <J>4.41173417e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Count, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="46" >
    #       <SerialNumber>1123</SerialNumber>
    #       <CalibrationDate>11-Nov-15</CalibrationDate>
    #       <PA0>6.96112196e-001</PA0>
    #       <PA1>5.49972465e-004</PA1>
    #       <PA2>1.53175364e-013</PA2>
    #       <PTEMPA0>-9.28335614e+001</PTEMPA0>
    #       <PTEMPA1>4.14914260e+001</PTEMPA1>
    #       <PTEMPA2>1.52870082e+000</PTEMPA2>
    #       <PTCA0>8.37081850e+006</PTCA0>
    #       <PTCA1>-8.59654618e+001</PTCA1>
    #       <PTCA2>5.90656907e+000</PTCA2>
    #       <PTCB0>1.04072526e+002</PTCB0>
    #       <PTCB1>-8.96132376e-003</PTCB1>
    #       <PTCB2>0.00000000e+000</PTCB2>
    #       <Offset>0.000000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>3234</SerialNumber>
    #       <CalibrationDate>03-Nov-15</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>5.3831e-001</Soc>
    #         <offset>-0.5530</offset>
    #         <A>-3.6948e-003</A>
    #         <B> 1.5409e-004</B>
    #         <C>-2.3179e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.1700</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>FLRTD-2214</SerialNumber>
    #       <CalibrationDate>2/6/2017</CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0310</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- Unknown 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- Unknown 3, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- Unknown 4, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- Unknown 5, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- Unknown 6, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- Unknown 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 22 2017 10:26:54, 7.23.2 [datcnv_vars = 8]
    # datcnv_in = P:\Cruise_Data_Processing\2017-07\RAW\CTD\2017-07-167.xml P:\Cruis
    e_Data_Processing\2017-07\Processing\doc\2017-07-ctd2.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wfilter_date = Nov 14 2017 14:51:42, 7.23.2
    # wfilter_in = P:\Cruise_Data_Processing\2017-07\Processing\convert\2017-07-0167
    .cnv
    # wfilter_excl_bad_scans = yes
    # wfilter_action prdM = cosine, 7
    # wfilter_action depSM = cosine, 7
    # wfilter_action t090C = cosine, 7
    # wfilter_action c0S/m = cosine, 7
    # alignctd_date = Nov 14 2017 15:11:12, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2017-07\Processing\wfilter\2017-07-016
    7.cnv
    # alignctd_adv = sbeox0V 2.000
    # celltm_date = Nov 14 2017 15:12:58, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2017-07\Processing\align\2017-07-0167.cn
    v
    # celltm_alpha = 0.0400, 0.0000
    # celltm_tau = 8.0000, 0.0000
    # celltm_temp_sensor_use_for_cond = primary,
    # Derive_date = Nov 14 2017 15:15:13, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2017-07\Processing\celltm\2017-07-0167.c
    nv P:\Cruise_Data_Processing\2017-07\Processing\doc\2017-07-ctd2.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove a few records near the surface and records
     corrupted by shed wakes near the bottom of the cast.

    Data Processing Notes:
    ----------------------
    Dissolved Oxygen and Fluorescence are nominal and unedited, except
      that some  records were removed in editing temperature and salinity.

    While the CTD fluorescence data are expressed in concentration units, they
      do not always compare well to extracted chlorophyll samples, particularly for
      casts far from shore. It is suggested that extracted chlorophyll values be
      checked where available.

    Comparison with bottles suggests that the CTD salinity is reasonably close to bottle
      salinity for both conductivity sensors, but there is a large scatter and flushing of
      Niskin bottles is likely incomplete. No recalibration was applied.

    There was no dissolved oxygen calibration sampling, so the recalibration used for
      cruise 2017-01 was applied to these data since the same sensor was used and
      calibration sampling was extensive.

    For details on the processing see processing report: 2017-07-proc.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0.413E-01 1.0484)
    $END
!--1--- --2--- ---3---- ---4--- ---5---- --6--- --7-- -8--
!Pressu Depth  Temperat Fluores Salinity Oxygen Oxyge Numb
!re            ure:     cence:  :T0:C0   :      n:    er_o
!              Primary  URU:             Dissol Disso ~bin
!                       Wetlabs          ved:   lved: _rec
!                                        SBE    SBE   ords
!------ ------ -------- ------- -------- ------ ----- ----
*END OF HEADER
    2.0    2.0  13.7064   6.892  28.2487   5.42 237.1   25
    3.0    3.0  13.3520   6.130  28.6474   5.14 224.6   22
    4.0    4.0  13.1482   5.040  28.7564   4.94 216.0   22
    5.0    5.0  12.9693   4.567  28.8361   4.80 209.8   20
    6.0    5.9  12.8916   4.192  28.8696   4.72 206.3   22
    7.0    6.9  12.8715   4.071  28.8779   4.71 205.9   20
    8.0    7.9  12.8080   4.025  28.9050   4.70 205.2   22
    9.0    8.9  12.7492   3.753  28.9288   4.65 203.3   21
   10.0    9.9  12.7202   3.913  28.9415   4.60 201.2   21
   11.0   10.9  12.5920   3.590  28.9963   4.51 197.0   21
   12.0   11.9  12.5286   3.315  29.0243   4.44 194.1   21
   13.0   12.9  12.4668   3.131  29.0587   4.41 192.7   22
   14.0   13.9  12.4240   2.936  29.0815   4.36 190.6   20
   15.0   14.9  12.3532   2.786  29.1197   4.30 187.7   22
   16.0   15.8  12.3121   2.820  29.1426   4.26 186.0   21
   17.0   16.9  12.1827   2.499  29.2132   4.17 182.4   22
   18.0   17.8  12.0659   2.174  29.2794   4.08 178.3   20
   19.0   18.8  12.0389   2.146  29.2932   4.06 177.5   21
   20.0   19.8  12.1317   2.151  29.2415   4.12 180.1   22
   21.0   20.8  12.1077   2.190  29.2501   4.12 180.0   20
   22.0   21.8  12.0694   2.076  29.2687   4.08 178.2   22
   23.0   22.8  12.0658   2.098  29.2734   4.08 178.4   20
   24.0   23.8  12.0573   2.064  29.2790   4.08 178.0   20
   25.0   24.8  12.0185   2.068  29.3037   4.06 177.2   21
   26.0   25.8  11.9986   2.173  29.3188   4.03 175.9   20
   27.0   26.7  11.9476   2.021  29.3485   3.99 174.1   21
   28.0   27.7  11.9070   1.792  29.3729   3.97 173.3   19
   29.0   28.8  11.9066   1.752  29.3725   3.97 173.4   22
   30.0   29.7  11.9004   1.873  29.3770   3.96 172.8   20
   31.0   30.8  11.8774   1.759  29.3920   3.94 171.8   21
   32.0   31.7  11.8583   1.704  29.3995   3.92 171.1   21
   33.0   32.7  11.8529   1.758  29.4022   3.92 171.0   21
   34.0   33.7  11.8528   1.737  29.4031   3.92 171.4   22
   35.0   34.7  11.8461   1.758  29.4084   3.93 171.5   19
   36.0   35.7  11.8341   1.698  29.4159   3.91 170.6   23
   37.0   36.7  11.8208   1.721  29.4242   3.86 168.7   20
   38.0   37.7  11.6730   1.647  29.5188   3.76 164.2   21
   39.0   38.7  11.5146   1.046  29.6133   3.63 158.6   21
   40.0   39.7  11.4484   1.005  29.6510   3.55 155.2   20
   41.0   40.6  11.3463   0.854  29.7143   3.49 152.5   23
   42.0   41.7  11.2944   0.722  29.7480   3.44 150.3   19
   43.0   42.6  11.2545   0.694  29.7714   3.40 148.4   23
   44.0   43.6  11.1639   0.523  29.7923   3.32 144.8   20
   45.0   44.6  11.0970   0.425  29.8232   3.25 141.7   21
   46.0   45.6  11.0527   0.351  29.8450   3.23 140.9   21
   47.0   46.6  11.0314   0.270  29.8566   3.22 140.6   21
   48.0   47.6  11.0206   0.284  29.8609   3.22 140.5   21
   49.0   48.6  11.0142   0.286  29.8733   3.23 141.0   20
   50.0   49.6  11.0092   0.257  29.9228   3.28 143.2   23
   51.0   50.6  10.9988   0.276  29.9495   3.31 144.5   20
   52.0   51.6  10.9813   0.248  29.9792   3.31 144.2   23
   53.0   52.6  10.9675   0.257  30.0004   3.28 143.3   21
   54.0   53.5  10.8990   0.268  30.0706   3.26 142.1   22
   55.0   54.5  10.8422   0.255  30.1373   3.25 141.8   21
   56.0   55.5  10.8157   0.265  30.1706   3.24 141.5   22
   57.0   56.5  10.7681   0.255  30.2265   3.23 141.0   21
   58.0   57.5  10.7418   0.252  30.2545   3.21 140.1   22
   59.0   58.5  10.7172   0.269  30.2796   3.20 139.5   22
   60.0   59.5  10.7055   0.255  30.2881   3.18 138.8   23
   60.6   60.1  10.6994   0.316  30.2875   3.16 138.0    9