*2016/08/15 09:00:50.32 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2016/05/19 09:15:06.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 8 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 82FAAB29 NUMBER OF CHANNELS : 14 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Bottle_Number n/a 1 8 2 Bottle:Firing_Sequence n/a 1 8 3 Pressure decibar 2.023 368.593 4 Temperature:Secondary 'deg C (ITS90)' 7.926 10.5826 5 Transmissivity %/metre 13.2 59 6 Fluorescence:URU:Seapoint mg/m^3 0.78E-01 9.968 7 pH:SBE:Nominal n/a 7.573 8.51 8 Salinity:T1:C1 PSS-78 24.7313 32.6531 9 Oxygen:Dissolved:SBE mL/L 2.385 9.019 10 Oxygen:Dissolved:SBE umol/kg 103.8 395.2 11 Number_of_bin_records n/a 57 241 12 Sample_Number n/a 176 183 13 Salinity:Bottle PSS-78 30.7668 31.5336 14 Flag:Salinity:Bottle ' ' $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 3 I I 0 3 -99 ' ' 7 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 8 F ' ' 3 8 -99 ' ' 9 F ' ' 4 9 -99 ' ' 7 F ' ' 2 10 -99 ' ' 6 F ' ' 1 11 ' ' ' ' 5 I I 0 12 -99 ' ' 5 I I 0 13 -99 ' ' 9 F R4 4 14 0 ' ' 3 NQ C ' ' $END $REMARKS Flag channels were initialized with zeros. Non-zero values have the following significance: ---------------------------------------------------------------------------------- 1 = Sample for this measurement was collected but not analyzed. Sample lost. 2 = Acceptable Measurement 3 = Questionable Measurement (Probably Good) 4 = Poor Measurement (Probably Bad) 5 = Measurement Not Reported (Bad) 6 = Mean of replicate measurements 7 = Manual chromatographic peak measurement 8 = Irregular digital chromatographic peak integration 9 = Sample was planned for this measurement from this bottle but was not collected ---------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2016-41 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : WC - Douglas Channel - Freshwater SCIENTIST : Johannessen S. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Douglas Channel STATION : FOC1 EVENT NUMBER : 21 LATITUDE : 53 44.22000 N ! (deg min) LONGITUDE : 129 1.60000 W ! (deg min) WATER DEPTH : 373 ALTIMETER (M) : 4.74 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! --------------------------------- -------------- ---------- Temperature ' ' 2106 Conductivity ' ' 2280 'Pressure:Digiquartz with TC' ' ' 0443 Temperature:2 ' ' 2663 Conductivity:2 ' ' 2754 'Oxygen:SBE 43' ' ' 0997 Fluorometer:Seapoint ' ' 3640 'Transmissometer:WET Labs C-Star' ' ' 1185DR Altimeter ' ' 62354 pH ' ' 0692 $END $REMARKS SOFTWARE VERSION SEASAVE V 7.23.2 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.5 2016/07/28 15:08:56 1744 1744 CLEAN 5.2.1 2016/07/28 15:24:33 1744 1744 ADDSAMP 3.6 2016/07/28 15:52:19 1744 1744 BINAVE 4.2 2016/07/28 15:52:34 1744 8 MERGE 3.5 2016/07/28 16:42:49 8 8 CALIB 11.8.1 2016/08/12 14:32:56 8 8 CALIB 11.8.1 2016/08/12 14:33:15 8 8 SORT 3.6 2016/08/12 16:53:56 8 8 REMOVECH 8.2 2016/08/15 08:53:01 8 8 CHGUNITS 3.1 2016/08/15 08:57:47 8 8 CHGUNITS 3.1 2016/08/15 08:57:53 8 8 REORDER 1.3.1 2016/08/15 08:58:13 ? ? HDREDIT2 3.0.2 2016/08/15 09:00:50 ? ? $END $REMARKS -CLEAN functions: 2016/07/28 15:24:22 20 Reset #RECS, MIN & MAX values in header. Insert Pad Values in Channel: Fluorescence:URU:Seapoint [mg/m^3] where channel Fluorescence:URU:Seapoint [mg/m^3] is in the range 14.816 to 15 29 data records in pad range. Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: P:\Cruise_Data_Processing\2016-41\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2016/07/28 16:42:49 Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Temperature:Draw, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Ammonium, Flag:Ammonium, pH, Flag:pH, Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : P:\Cruise_Data_Processing\2016-41\Processing\hydro\2016-41-0021.samavg Secondary file: P:\Cruise_Data_Processing\2016-41\Processing\hydro\2016-41-0021.mrgcln1s Comments from secondary file: P:\Cruise_Data_Processing\2016-41\Processing\hydro\2016-41-0021.mrgcln1s ------------------------------------------------------------------------ -SORT parameters: 2016/07/28 16:42:40 Sorted in ascending order of channel Bottle_Number -CALIB parameters: 2016/08/12 14:32:56 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Salinity is computed Calibration file = P:\Cruise_Data_Processing\2016-41\Processing\doc\2016-41-recal1.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Temperature:Primary deg C (IT 10 -0.1500000E-02 0.1000000E+01 18 Oxygen:Dissolved:SBE mL/L 10 0.3770000E-01 0.1020800E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 16 Salinity:T0:C0 PSS-78 130 Pressure Temperature:Primary Conductivity:Primary -CALIB parameters: 2016/08/12 14:33:15 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2016-41\Processing\doc\2016-41-recal2.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 16 Salinity:T0:C0 PSS-78 10 0.4000000E-02 0.1000000E+01 17 Salinity:T1:C1 PSS-78 10 0.2000000E-02 0.1000000E+01 -SORT parameters: 2016/08/12 16:53:56 Sorted in ascending order of channel Pressure* -REMOVECH 2016/08/15 08:53:01 The following CHANNEL(S) were removed: Scan_Number Temperature:Primary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Altimeter [metres] Descent_Rate [m/s] Status:Pump Salinity:T0:C0 [PSS-78] Flag -CHANGE units: Temperature reference channel: Temperature:Secondary Salinity reference channel: Salin* 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -CHANGE units: Temperature reference channel: Temperature:Draw Salinity reference channel: Salin* - No units changed -HEADER EDITS: 2016/08/15 09:00:50 Applied edit header: P:\Cruise_Data_Processing\2016-41\Processing\doc\HYDRO\2016-41-bot-hdr.txt Channel 2: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 1: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number Channel 3: Pressure [decibar] Format: F9.4 ==> F7.1 Channel 9: Oxygen:Dissolved:SBE [mL/L] Format: F11.3 ==> F7.2 Channel 13: Salinity:Bottle [PSS-78] Units: ==> PSS-78 Channel 7: pH:SBE:Nominal [n/a] Name: pH:SBE ==> pH:SBE:Nominal Units: pH Units ==> n/a $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\CTD Data\2016-41\2016-41-0021.hex Software Version Seasave V 7.23.2 Temperature SN = 2106 Conductivity SN = 2280 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = May 19 2016 09:20:25 NMEA Latitude = 53 44.22 N NMEA Longitude = 129 01.60 W NMEA UTC (Time) = May 19 2016 09:15:06 Store Lat/Lon Data = Append to Every Scan SBE 11plus V 5.1e number of scans to average = 1 pressure baud rate = 9600 NMEA baud rate = 4800 GPIB address = 1 advance primary conductivity 0.073 seconds advance secondary conductivity 0.073 seconds S> Mission: 2016-41 Ship: J.P. Tully Station: FOC1 Depth: 373 System UTC = May 19 2016 09:20:25 # nquan = 19 # nvalues = 1744 # units = specified # name 0 = scan: Scan Count # name 1 = bpos: Bottle Position in Carousel # name 2 = nbf: Bottles Fired # name 3 = prDM: Pressure, Digiquartz [db] # name 4 = t090C: Temperature [ITS-90, deg C] # name 5 = t190C: Temperature, 2 [ITS-90, deg C] # name 6 = c0S/m: Conductivity [S/m] # name 7 = c1S/m: Conductivity, 2 [S/m] # name 8 = CStarTr0: Beam Transmission, WET Labs C-Star [%] # name 9 = flSP: Fluorescence, Seapoint # name 10 = sbeox0V: Oxygen raw, SBE 43 [V] # name 11 = ph: pH # name 12 = altM: Altimeter [m] # name 13 = dz/dtM: Descent Rate [m/s] # name 14 = pumps: Pump Status # name 15 = sal00: Salinity, Practical [PSU] # name 16 = sal11: Salinity, Practical, 2 [PSU] # name 17 = sbeox0ML/L: Oxygen, SBE 43 [ml/l] # name 18 = flag: 0.000e+00 # interval = seconds: 0.0416667 # start_time = May 19 2016 09:15:06 [NMEA time, header] # bad_flag = -9.990e-29 # # # # # 2106 # 17-Dec-14 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.14703785e-003 # 6.31044927e-004 # 2.13121431e-005 # 2.18594910e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 2280 # 19-Dec-14 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -1.00904009e+001 # 1.35149315e+000 # -1.84720682e-003 # 1.90856808e-004 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 0443 # 17-Dec-14 # -4.435292e+004 # -1.635794e-001 # 1.192740e-002 # 3.979900e-002 # 0.000000e+000 # 2.993627e+001 # -3.271008e-004 # 3.759160e-006 # 1.565300e-009 # 0.99991613 # -0.54760 # 0.000000e+000 # 1.282462e-002 # -8.599824e+000 # # # # # # 2663 # 15-Jan-15 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.36565531e-003 # 6.42337654e-004 # 2.40578991e-005 # 2.42263656e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 2754 # 19-Dec-14 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -1.05920237e+001 # 1.61356129e+000 # -1.94911294e-003 # 2.41671700e-004 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 0997 # 17-Jan-15 # 1 # # # 0.0000 # 0.0000e+000 # 0.0000 # 0.00e+000 # 0.0000 # 0.0 # # # # 4.0785e-001 # -0.6967 # -3.5082e-003 # 1.2934e-004 # -1.8411e-006 # 2.5826e+000 # 1.92634e-004 # -4.64803e-002 # 3.6000e-002 # 1.6200 #

-3.3000e-002

#

5.0000e+003

#

1.4500e+003

# # # # # # # 3640 # # # 1 # 0.000 # # # # # # 1185DR # APR 27. 2016 # 19.3479 # -1.1028 # 0.250 # # # # # # # # # 62354 # # 15.000 # 0.000 # # # # # # # # # 0692 # 12 Jan 2016 # 4.6015 # 2.5353 # # # # # # # datcnv_date = Jul 28 2016 15:05:44, 7.23.2 # datcnv_in = P:\Cruise_Data_Processing\2016-41\RAW\CTD\2016-41-0021.hex P:\Crui se_Data_Processing\2016-41\Processing\doc\2016-41-ctd.xmlcon # datcnv_ox_hysteresis_correction = no # datcnv_ox_tau_correction = yes # datcnv_bottle_scan_range_source = BL file # datcnv_scans_per_bottle = 241 END* Analysis methods: ----------------- Oxygen samples were analyzed at sea using an automated Winkler titration system (Metrohm Dosimat model 876 and a UV light source and detector with a 365 nm filter controlled by LVO2_876 software designed and constructed by Scripps Institution of Oceanography) with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). For details including a duplicate analysis, see document QF2016-41OXY*.xls. Salinity samples were collected in 200 mL type ll glass bottles with disposable nylon inserts and screw caps supplied by Ocean Scientific International Limited. They were analyzed in a temperature-controlled lab at IOS on a Guildline 8400B Salinometer (S/N 68572) standardized with IAPSO standard seawater 51 to 56 days after collection. For details see document QF2016-41SAL*.xlsx. Nutrient samples were collected in plastic tubes and quick frozen in aluminum blocks stored in -20 freezer. All analysis was performed on frozen samples. They were analyzed using an Astoria analyzer following methods described in IOS Nutrient Methods (1996) Barwell-Clarke and Whitney. For details including a precision and accuracy statement, see document NUTS_QF2016-41*.xlsx. References: 1. Barwell-Clarke, J. and Whitney, F. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. 2. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 3. Culberson, C.H. 1991. Dissolved oxygen. WOCE Hydrographic Programme Operations and Methods (July 1991). 15pp. * For PDF versions of these papers see folder \\Cruise_Data\DOCUMENTS\Analysis Reference Papers --------------------------------------------------------------------------------- CTD Data Processing Notes: -------------------------- Transmissivity, Fluorescence and pH data are nominal and unedited except that some records were removed in editing temperature and salinity. For details on how the transmissivity calibration parameters were calculated see the document in folder "\cruise_data\documents\transmissivity". Dissolved oxygen was calibrated using the method described in SeaBird Application Note #64-2, June 2012 revision. WARNING: The pH:SBE:Nominal data should be used with caution; no field calibration data were available at the time of processing. Calibration is required for each cast to get absolute values, although general trends within a cast are likely real. Channel pH:SBE was removed from events 12, 13 and 14 because it was apparent that the sensor was not well hydrated. For details on the processing see the report: 2016-41_Processing_Report.doc. --------------------------------------------------------------------------------- *CALIBRATION $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------- -------- ---- ------ ------------ Salinity:T0:C0 PSS-78 130 -99 (Pressure Temperature:Primary Conductivity:Primary) () $END $TABLE: CORRECTED CHANNELS !Name Units Fmla Pad Coefficients !---------------------- --------------- ---- ------ ------------ Temperature:Primary 'deg C (ITS90)' 10 -99 () (-0.15E-02 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.377E-01 1.0208) Salinity:T0:C0 PSS-78 10 -99 () (0.4E-02 1) Salinity:T1:C1 PSS-78 10 -99 () (0.2E-02 1) $END !1- 2- --3--- ---4---- --5-- ---6--- ---7--- ---8---- --9--- --10- -11- -12- ---13--- 14 !Bo Bo Pressu Temperat Trans Fluores pH:SBE: Salinity Oxygen Oxyge Numb Samp Salinity Fl !tt tt re ure: missi cence: Nominal :T1:C1 : n: er_o le_ :Bottle ag !~u ~u Secondar vity URU: Dissol Disso ~bin Numb ~o !mb en y Seapoin ved: lved: _rec er tt !er ce t SBE SBE ords le !-- -- ------ -------- ----- ------- ------- -------- ------ ----- ---- ---- -------- -- *END OF HEADER 8 8 2.0 10.5826 13.2 9.968 8.510 24.7313 9.02 395.2 241 183 -99.0000 7 7 19.6 8.3265 47.3 1.553 7.839 29.8884 5.43 237.1 241 182 -99.0000 6 6 29.4 8.1199 53.0 0.595 7.794 30.5759 5.06 220.7 241 181 30.7668 5 5 39.5 8.0914 55.5 0.351 7.811 31.0246 5.23 228.1 241 180 31.1002 3 3 49.4 8.1379 57.8 0.216 7.805 31.4933 5.07 221.0 57 178 -99.0000 4 4 49.4 8.1375 57.7 0.203 7.805 31.4929 5.08 221.1 241 179 31.5336 2 2 99.8 8.3034 59.0 0.114 7.805 32.2349 4.53 197.2 241 177 -99.0000 1 1 368.6 7.9260 49.3 0.078 7.573 32.6531 2.38 103.8 241 176 -99.0000