*2016/05/27 16:33:12.44
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2015/10/05 18:46:27.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 35
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 4B855374
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Pressure                    decibar         4.119          38.955
       2 Temperature:Primary         'deg C (ITS90)' 11.9433        12.7704
       3 Fluorescence:URU:Seapoint   mg/m^3          0.147          0.95
       4 pH:SBE:Nominal              n/a             7.983          8.095
       5 Salinity:T0:C0              PSS-78          29.7547        30.474
       6 Oxygen:Dissolved:SBE        mL/L            2.208          3.091
       7 Oxygen:Dissolved:SBE        umol/kg         96.36597       134.9708
       8 Number_of_bin_records       n/a             2              35
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        8  F       ' '     3
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  -99   ' '        7  F       ' '     2
       7  -99   ' '        6  F       ' '     1
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2015-56\Pro
    $END

*ADMINISTRATION
    MISSION             : 2015-56
    AGENCY              : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C.
    COUNTRY             : Canada
    PROJECT             : Salmon Marine Interactions
    SCIENTIST           : Neville C.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : SoG/JdF/WCVI/Hecate Strait
    STATION             : SET 143
    EVENT NUMBER        : 230
    LATITUDE            :  48   9.83000 N  ! (deg min)
    LONGITUDE           : 122  27.08000 W  ! (deg min)
    WATER DEPTH         : 48

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0550

    $TABLE: SENSORS
    !   Name                           Abs Depth       Serial No
    !   -----------------------------  --------------  ----------
        Temperature                    ' '             2374
        Conductivity                   ' '             2128
        'Pressure:Digiquartz with TC'  ' '             0550
        Temperature:2                  ' '             2710
        Conductivity:2                 ' '             3184
        'Oxygen:SBE 43'                ' '             1176
        Fluorometer:Seapoint           ' '             3641
        pH                             ' '             0851
    $END
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21D
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.5    2016/05/17 17:28:37      2959      2959
        CLEAN    5.2.1  2016/05/17 17:33:11      2959      2959
        SHIFTDAT 3.4    2016/05/18 15:28:42      2959      2959
        SHIFTDAT 3.4    2016/05/18 15:46:30      2959      2959
        SHIFTDAT 3.4    2016/05/18 16:42:29      2959      2959
        SHIFTDAT 3.4    2016/05/18 16:46:58      2959      2959
        DELETE   6.3    2016/05/18 16:50:54      2959      1077
        CTDEDIT  5.0.4  2016/05/20 14:49:35      1077       966
        FILTERS  4.3    2016/05/26 10:37:01       966       966
        BINAVE   4.2    2016/05/26 11:35:09       966        35
        REMOVECH 8.2    2016/05/26 11:39:57        35        35
        CHGUNITS 3.1    2016/05/26 11:50:29        35        35
        REORDER  1.3.1  2016/05/26 11:51:04 ?         ?
        HDREDIT2 3.0.2  2016/05/27 16:33:12 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2016/05/17 17:31:09 20
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:URU:Seapoint [mg/m^3]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 24.00
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE [pH Units]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 70.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary [S/m]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -1.35
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Secondary [S/m]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -1.10
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    29.58 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT  v5.0.4   2016/05/20 14:49:35
            111 records were deleted in this editing session.
             12 changes in channel Salinity:T0:C0
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2016/05/26 11:39:57
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Secondary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Status:Pump
          Salinity:T1:C1 [PSS-78]
          Flag
        -CHANGE units:
         Temperature reference channel: Temp*
         Salinity    reference channel: Sal*
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2016/05/27 16:33:12
         Applied edit header: P:\Cruise_Data_Processing\2015-56\Processing\doc\2015-56-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F11.2 ==> F7.1
         Channel  6: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  4: pH:SBE:Nominal [n/a]
           Name:   pH:SBE ==> pH:SBE:Nominal
           Units:  pH Units ==> n/a
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\CTD Data\2015-56\2015-56-0230.hex
      Software Version Seasave V 7.21d
      Temperature SN = 2374
      Conductivity SN = 2128
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Oct 05 2015 18:47:45
      NMEA Latitude = 48 09.83 N
      NMEA Longitude = 122 27.08 W
      NMEA UTC (Time) = Oct 05 2015  18:46:27
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ship: W.E. Ricker 2015-56
       Station: Set 143
       Operator: LT
       Depth: 48 m
      System UTC = Oct 05 2015 18:47:45
    # nquan = 15
    # nvalues = 2959
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = flSP: Fluorescence, Seapoint
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = ph: pH
    # name 9 = dz/dtM: Descent Rate [m/s]
    # name 10 = pumps: Pump Status
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sal11: Salinity, Practical, 2 [PSU]
    # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 1
    # name 14 = flag: flag
    # span 0 =          1,       2959
    # span 1 =      1.851,     39.582
    # span 2 =    11.9362,    13.1684
    # span 3 =    11.9353,    13.0714
    # span 4 =   3.490229,   3.577212
    # span 5 =   3.492599,   3.577047
    # span 6 = 1.3431e-01, 1.5629e+00
    # span 7 =     1.0757,     1.5165
    # span 8 =      7.981,      8.164
    # span 9 =     -1.098,      0.987
    # span 10 =          0,          1
    # span 11 =    29.4297,    30.4758
    # span 12 =    29.5318,    30.4738
    # span 13 =     2.1756,     3.8816
    # span 14 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Oct 05 2015 18:46:27 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2374</SerialNumber>
    #       <CalibrationDate>16-Dec-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.34914766e-003</G>
    #       <H>6.45599692e-004</H>
    #       <I>2.33863266e-005</I>
    #       <J>2.19778544e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2128</SerialNumber>
    #       <CalibrationDate>16-Dec-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01982116e+001</G>
    #         <H>1.46262728e+000</H>
    #         <I>-2.86002898e-003</I>
    #         <J>2.90460528e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0550</SerialNumber>
    #       <CalibrationDate>17-Dec-14</CalibrationDate>
    #       <C1>-4.232943e+004</C1>
    #       <C2>1.065076e-001</C2>
    #       <C3>1.464900e-002</C3>
    #       <D1>3.694200e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.041883e+001</T1>
    #       <T2>-3.536199e-004</T2>
    #       <T3>4.388420e-006</T3>
    #       <T4>2.583800e-009</T4>
    #       <Slope>1.00002764</Slope>
    #       <Offset>0.67335</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.286170e-002</AD590M>
    #       <AD590B>-9.445820e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2710</SerialNumber>
    #       <CalibrationDate>16-Dec-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.36717385e-003</G>
    #       <H>6.46681437e-004</H>
    #       <I>2.34978657e-005</I>
    #       <J>2.22502310e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3184</SerialNumber>
    #       <CalibrationDate>23-Dec-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.02258196e+001</G>
    #         <H>1.43069366e+000</H>
    #         <I>-2.89291295e-004</I>
    #         <J>9.65783118e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1176</SerialNumber>
    #       <CalibrationDate>19-Dec-15</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>6.5752e-001</Soc>
    #         <offset>-0.5219</offset>
    #         <A>-4.0682e-003</A>
    #         <B> 1.6157e-004</B>
    #         <C>-2.8213e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.6900</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>3641</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0851</SerialNumber>
    #       <CalibrationDate>Sept 4th 2014</CalibrationDate>
    #       <Slope>4.6134</Slope>
    #       <Offset>2.5497</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, Free -->
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = May 17 2016 14:50:19, 7.23.2 [datcnv_vars = 11]
    # datcnv_in = P:\Cruise_Data_Processing\2015-56\RAW\CTD\2015-56-0230.hex P:\Crui
    se_Data_Processing\2015-56\Processing\doc\2015-56-ctd-post.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = May 17 2016 16:23:49, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2015-56\Processing\convert\2015-56-023
    0.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = May 17 2016 17:21:15, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2015-56\Processing\wildedit\2015-56-02
    30.cnv
    # alignctd_adv = sbeox0V 2.500
    # celltm_date = May 17 2016 17:22:54, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2015-56\Processing\align\2015-56-0230.cn
    v
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = May 17 2016 17:25:41, 7.23.2 [derive_vars = 3]
    # Derive_in = P:\Cruise_Data_Processing\2015-56\Processing\celltm\2015-56-0230.c
    nv P:\Cruise_Data_Processing\2015-56\Processing\doc\2015-56-ctd-post.xmlcon
    # derive_time_window_docdt = seconds: 1
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to clean salinity and to remove records corrupted by
     shed wakes.
    ---------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    Fluorescence, Dissolved Oxygen and pH data are nominal and unedited except that
        some records were removed in editing temperature and salinity.

    There was no calibration sampling for salinity or dissolved oxygen for this cruise
        or from previous cruises using these sensors since the pre-cruise factory
        calibration was done. Post-cruise calibrations were used in converting
        temperature, conductivity and dissolved oxygen.

    WARNING: The pH:SBE:Nominal data should be used with caution; no field
      calibration data were available.  Calibration is required  for each cast
      to get absolute values, although general trends within a cast are likely real.

    For details on the processing see the report: 2015-56_Processing_Report.doc.

    ---------------------------------------------------------------------------------
!--1--- ---2---- ---3--- ---4--- ---5---- --6--- --7-- -8--
!Pressu Temperat Fluores pH:SBE: Salinity Oxygen Oxyge Numb
!re     ure:     cence:  Nominal :T0:C0   :      n:    er_o
!       Primary  URU:                     Dissol Disso ~bin
!                Seapoin                  ved:   lved: _rec
!                t                        SBE    SBE   ords
!------ -------- ------- ------- -------- ------ ----- ----
*END OF HEADER
    4.1  12.7704   0.950   8.095  29.7547   3.09 135.0   31
    4.8  12.4180   0.834   8.073  29.9550   2.85 124.5   33
    6.3  12.1521   0.651   8.024  30.0599   2.67 116.4    9
    7.0  12.0552   0.512   8.008  30.0913   2.44 106.7   35
    8.0  12.0142   0.430   8.004  30.1103   2.35 102.5   32
    8.5  11.9433   0.464   8.005  30.1173   2.38 104.1    2
   11.2  11.9655   0.389   7.989  30.1433   2.26  98.8   12
   12.0  11.9684   0.292   7.986  30.2000   2.21  96.6   29
   13.0  12.0098   0.237   7.983  30.2303   2.21  96.4   27
   14.0  12.0582   0.208   7.985  30.2524   2.23  97.1   28
   15.0  12.0954   0.180   7.989  30.2729   2.25  98.1   26
   16.0  12.1218   0.171   7.996  30.2865   2.29 100.0   25
   17.0  12.1693   0.166   7.999  30.3084   2.33 101.5   25
   18.0  12.1819   0.165   8.003  30.3150   2.33 101.9   27
   19.0  12.2033   0.168   8.007  30.3243   2.35 102.3   27
   20.0  12.2762   0.163   8.010  30.3532   2.37 103.5   27
   21.0  12.3132   0.159   8.013  30.3687   2.39 104.2   26
   22.0  12.3263   0.156   8.016  30.3760   2.39 104.3   26
   23.0  12.3619   0.149   8.022  30.3908   2.42 105.6   26
   24.0  12.4162   0.147   8.026  30.4126   2.45 106.8   26
   25.0  12.4140   0.147   8.027  30.4175   2.44 106.3   27
   26.0  12.4087   0.152   8.027  30.4184   2.42 105.7   25
   27.0  12.4128   0.152   8.028  30.4213   2.43 106.0   26
   28.0  12.4222   0.161   8.030  30.4262   2.43 106.1   27
   29.0  12.4314   0.159   8.031  30.4307   2.44 106.5   26
   30.0  12.4345   0.157   8.031  30.4326   2.44 106.4   28
   31.0  12.4344   0.147   8.033  30.4333   2.44 106.4   31
   32.0  12.4381   0.154   8.035  30.4348   2.44 106.5   34
   33.0  12.4482   0.147   8.036  30.4397   2.45 106.8   29
   34.0  12.4551   0.152   8.037  30.4434   2.46 107.1   33
   35.0  12.4654   0.147   8.037  30.4489   2.45 107.0   33
   36.0  12.4771   0.150   8.036  30.4570   2.43 106.1   33
   37.0  12.4884   0.147   8.033  30.4646   2.41 105.1   34
   38.0  12.4996   0.147   8.032  30.4708   2.40 104.9   33
   39.0  12.5061   0.156   8.031  30.4740   2.40 104.9   24