*2016/04/20 12:06:03.93
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2015/07/18 21:30:12.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 48
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 4A2DA0DD
    NUMBER OF CHANNELS  : 6

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Pressure                    decibar         3.958667       50.63078
       2 Temperature:Primary         'deg C (ITS90)' 8.812355       11.56652
       3 Fluorescence:URU:Seapoint   mg/m^3          0.1424783      10.18452
       4 pH:SBE:Nominal              n/a             7.840445       8.189583
       5 Salinity:T0:C0              PSS-78          31.00022       32.54138
       6 Number_of_bin_records       n/a             2              39
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        8  F       ' '     3
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2015-15\Pro
    $END

*ADMINISTRATION
    MISSION             : 2015-15
    AGENCY              : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C.
    COUNTRY             : Canada
    PROJECT             : High Seas Salmon
    SCIENTIST           : Thiess M.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : Juan de Fuca Strait / WCVI / Johnstone Strait
    STATION             : QCST 06
    EVENT NUMBER        : 359
    LATITUDE            :  50  40.99000 N  ! (deg min)
    LONGITUDE           : 127  17.02000 W  ! (deg min)
    WATER DEPTH         : 58

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0585

    $TABLE: SENSORS
    !   Name                           Abs Depth       Serial No
    !   -----------------------------  --------------  ----------
        Temperature                    ' '             4752
        Conductivity                   ' '             3396
        'Pressure:Digiquartz with TC'  ' '             0585
        Temperature:2                  ' '             2449
        Conductivity:2                 ' '             2399
        'Oxygen:SBE 43'                ' '             1119
        Fluorometer:Seapoint           ' '             3685
        pH                             ' '             0851
    $END
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21D
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.4.1  2016/04/12 14:21:14      3515      3515
        CLEAN    5.2.1  2016/04/12 14:22:43      3515      3515
        SHIFTDAT 3.4    2016/04/12 16:47:34      3515      3515
        SHIFTDAT 3.4    2016/04/12 17:35:00      3515      3515
        SHIFTDAT 3.4    2016/04/13 10:24:37      3515      3515
        DELETE   6.3    2016/04/13 10:29:27      3515      1276
        CTDEDIT  5.0.4  2016/04/19 08:52:07      1276      1157
        CALIB    11.8.1 2016/04/20 11:34:45      1157      1157
        FILTERS  4.3    2016/04/20 11:35:37      1157      1157
        BINAVE   4.2    2016/04/20 11:48:39      1157        48
        REMOVECH 8.2    2016/04/20 11:48:43        48        48
        HDREDIT2 3.0.2  2016/04/20 12:06:03 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2016/04/12 14:21:26 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:URU:Seapoint
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 24.00
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 50.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    41.07 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT  v5.0.4   2016/04/19 08:52:07
            119 records were deleted in this editing session.
              4 changes in channel Salinity:T0:C0
        -CALIB parameters: 2016/04/20 11:34:45
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         12 Salinity:T0:C0                PSS-78     10 -0.2000000E-02  0.1000000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2016/04/20 11:48:43
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Secondary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Status:Pump
          Salinity:T1:C1 [PSS-78]
          Flag
        -HEADER EDITS: 2016/04/20 12:06:03
         Applied edit header: P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  4: pH:SBE:Nominal [n/a]
           Name:   pH:SBE ==> pH:SBE:Nominal
           Units:  pH Units ==> n/a
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\CTD Data\2015-15\2015-15-0359.hex
      Software Version Seasave V 7.21d
      Temperature SN = 4752
      Conductivity SN = 3396
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Jul 18 2015 14:33:20
      NMEA Latitude = 50 40.99 N
      NMEA Longitude = 127 17.02 W
      NMEA UTC (Time) = Jul 18 2015  21:30:12
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      Latitude/Longitude added to scan
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ship: W.E. Ricker 2015-15
       Station: QCST 06
       Operator: HM
       Depth:  58 m
      System UTC = Jul 18 2015 21:33:20
    # nquan = 14
    # nvalues = 3515
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = flSP: Fluorescence, Seapoint
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = ph: pH
    # name 9 = dz/dtM: Descent Rate [m/s]
    # name 10 = pumps: Pump Status
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sal11: Salinity, Practical, 2 [PSU]
    # name 13 = flag: flag
    # span 0 =          1,       3515
    # span 1 =      3.623,     51.070
    # span 2 =     8.7897,    11.8110
    # span 3 =     8.7920,    11.7884
    # span 4 =   3.463500,   3.569440
    # span 5 =   3.500428,   3.605334
    # span 6 = 1.0989e-01, 1.2247e+01
    # span 7 =     0.0000,     0.0000
    # span 8 =      7.827,      8.231
    # span 9 =     -1.184,      1.079
    # span 10 =          0,          1
    # span 11 =    30.9498,    32.5495
    # span 12 =    31.3188,    32.9363
    # span 13 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Jul 18 2015 21:30:12 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4752</SerialNumber>
    #       <CalibrationDate>23-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35902423e-003</G>
    #       <H>6.36413981e-004</H>
    #       <I>2.06309769e-005</I>
    #       <J>1.71365270e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>19-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91941065e+000</G>
    #         <H>1.31439274e+000</H>
    #         <I>3.00845560e-005</I>
    #         <J>6.13621985e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0585</SerialNumber>
    #       <CalibrationDate>30-Dec-13</CalibrationDate>
    #       <C1>-3.951550e+004</C1>
    #       <C2>-4.415130e-001</C2>
    #       <C3>1.282560e-002</C3>
    #       <D1>3.560600e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.030045e+001</T1>
    #       <T2>-4.415690e-004</T2>
    #       <T3>4.342710e-006</T3>
    #       <T4>1.736800e-009</T4>
    #       <Slope>0.99994600</Slope>
    #       <Offset>-2.11246</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.288270e-002</AD590M>
    #       <AD590B>-8.164490e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2449</SerialNumber>
    #       <CalibrationDate>06-Apr-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35517974e-003</G>
    #       <H>6.43485967e-004</H>
    #       <I>2.33381062e-005</I>
    #       <J>2.21338578e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2399</SerialNumber>
    #       <CalibrationDate>17-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.08277491e+001</G>
    #         <H>1.61475240e+000</H>
    #         <I>1.24520243e-003</I>
    #         <J>1.93505039e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1119</SerialNumber>
    #       <CalibrationDate>21-Jan-14</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.4901e-001</Soc>
    #         <offset>-0.5263</offset>
    #         <A>-1.9196e-003</A>
    #         <B> 8.5361e-005</B>
    #         <C>-1.2856e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.0400</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>3685</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0851</SerialNumber>
    #       <CalibrationDate>Sept 4th 2014</CalibrationDate>
    #       <Slope>4.6134</Slope>
    #       <Offset>2.5497</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 06 2015 12:16:12, 7.23.2 [datcnv_vars = 11]
    # datcnv_in = P:\Cruise_Data_Processing\2015-15\RAW\CTD\2015-15-0359.hex P:\Crui
    se_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Nov 16 2015 17:18:29, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2015-15\Processing\convert\2015-15-035
    9.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # celltm_date = Nov 16 2015 17:21:44, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2015-15\Processing\wildedit\2015-15-0359
    .cnv
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Nov 16 2015 17:28:08, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2015-15\Processing\celltm\2015-15-0359.c
    nv P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove some records corrupted by shed wakes;
     salinity was cleaned very lightly.

    ----------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    Fluorescence and pH data are nominal and unedited except that
      some records were removed in editing temperature and salinity.

    Recalibration of channel Salinity:T0:C0 was based on a post-cruise
      calibration and a comparison with bottle samples. Stops for
      bottles were often very short and there was a cruise between this
      one and the post-cruise calibration, but the salinity is likely
      good to +/- 0.002.

    A dissolved oxygen sensor was mounted but no data were acquired.

    WARNING: The pH:SBE:Nominal data should be used with caution; no field
      calibration data were collected.  Calibration is required for each cast to get
      absolute values, although general trends within a cast are likely real.

    For details on the processing see the report: 2015-15_Processing_Report.doc.

    ----------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name             Units    Fmla Pad    Coefficients
    !   ---------------- -------- ---- ------ ------------
        Salinity:T0:C0   PSS-78     10 -99    () (-0.2E-02 1)
    $END
!--1--- ---2---- ---3--- ---4--- ---5---- -6--
!Pressu Temperat Fluores pH:SBE: Salinity Numb
!re     ure:     cence:  Nominal :T0:C0   er_o
!       Primary  URU:                     ~bin
!                Seapoin                  _rec
!                t                        ords
!------ -------- ------- ------- -------- ----
*END OF HEADER
    4.0  11.5159   9.082   8.190  31.0022   12
    5.5  11.4738   9.945   8.180  31.0051    2
    6.0  11.4846  10.185   8.182  31.0023   27
    7.0  11.5388   9.160   8.189  31.0087   26
    8.0  11.5665   9.120   8.188  31.0002   25
    9.0  11.4997   9.379   8.169  31.0262   24
   10.0  11.2688   7.441   8.157  31.2165   26
   11.0  11.3280   8.205   8.154  31.1486   25
   12.0  11.3851   8.393   8.133  31.0720   24
   13.0  11.0760   5.570   8.095  31.3256   25
   14.0  10.7429   3.247   8.067  31.7703   24
   15.0  10.6833   2.360   8.049  31.8514   24
   16.0  10.6029   1.789   8.034  31.9146   24
   17.0  10.5123   1.409   8.023  31.9472   24
   18.0  10.4781   1.247   8.015  31.9527   26
   19.0  10.4400   0.912   8.011  31.9785   25
   20.0  10.4546   0.715   8.005  32.0082   22
   21.0  10.3840   0.836   7.998  32.0216   24
   22.0  10.2979   0.953   7.991  32.0361   24
   23.0  10.2533   0.635   7.985  32.0528   25
   24.0  10.2083   0.531   7.980  32.0765   26
   25.0  10.2053   0.425   7.978  32.0848   25
   26.0  10.2075   0.474   7.978  32.0888   26
   27.0  10.2149   0.522   7.977  32.0932   24
   28.0  10.2174   0.559   7.976  32.0970   25
   29.0  10.2281   0.500   7.978  32.1054   26
   30.0  10.2640   0.486   7.978  32.1224   25
   31.0  10.2719   0.454   7.977  32.1315   24
   32.0  10.1863   0.436   7.970  32.1674   23
   33.0   9.9822   0.371   7.961  32.1995   25
   34.0   9.8652   0.307   7.952  32.2129   26
   35.0   9.8079   0.287   7.944  32.2211   27
   36.0   9.7259   0.315   7.936  32.2397   25
   37.0   9.6666   0.301   7.930  32.2501   24
   38.0   9.6212   0.256   7.923  32.2596   24
   39.0   9.5712   0.262   7.917  32.2809   25
   40.0   9.4893   0.267   7.910  32.2962   26
   41.0   9.2798   0.218   7.900  32.3335   25
   42.0   9.1284   0.164   7.890  32.3655   24
   43.0   9.0273   0.170   7.880  32.4058   24
   44.0   8.9275   0.182   7.872  32.4484   25
   45.0   8.9113   0.163   7.863  32.4678   24
   46.0   8.9072   0.189   7.858  32.4805   24
   47.0   8.9018   0.142   7.853  32.4928   23
   48.0   8.8973   0.159   7.850  32.5014   25
   49.0   8.8663   0.209   7.846  32.5169   27
   50.0   8.8158   0.159   7.842  32.5391   39
   50.6   8.8124   0.178   7.840  32.5414    9