*2016/04/20 12:06:03.83
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2015/07/18 19:12:43.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 52
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : BC9CA7F1
    NUMBER OF CHANNELS  : 6

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Pressure                    decibar         4.048964       54.95144
       2 Temperature:Primary         'deg C (ITS90)' 9.947311       11.03198
       3 Fluorescence:URU:Seapoint   mg/m^3          0.8117778      6.29008
       4 pH:SBE:Nominal              n/a             7.924094       8.005091
       5 Salinity:T0:C0              PSS-78          31.18214       31.94729
       6 Number_of_bin_records       n/a             20             33
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        8  F       ' '     3
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2015-15\Pro
    $END

*ADMINISTRATION
    MISSION             : 2015-15
    AGENCY              : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C.
    COUNTRY             : Canada
    PROJECT             : High Seas Salmon
    SCIENTIST           : Thiess M.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : Juan de Fuca Strait / WCVI / Johnstone Strait
    STATION             : QCST 04
    EVENT NUMBER        : 353
    LATITUDE            :  50  41.46000 N  ! (deg min)
    LONGITUDE           : 127   9.95000 W  ! (deg min)
    WATER DEPTH         : 65

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0585

    $TABLE: SENSORS
    !   Name                           Abs Depth       Serial No
    !   -----------------------------  --------------  ----------
        Temperature                    ' '             4752
        Conductivity                   ' '             3396
        'Pressure:Digiquartz with TC'  ' '             0585
        Temperature:2                  ' '             2449
        Conductivity:2                 ' '             2399
        'Oxygen:SBE 43'                ' '             1119
        Fluorometer:Seapoint           ' '             3685
        pH                             ' '             0851
    $END
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21D
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.4.1  2016/04/12 14:21:12      4369      4369
        CLEAN    5.2.1  2016/04/12 14:22:41      4369      4369
        SHIFTDAT 3.4    2016/04/12 16:47:32      4369      4369
        SHIFTDAT 3.4    2016/04/12 17:34:58      4369      4369
        SHIFTDAT 3.4    2016/04/13 10:24:35      4369      4369
        DELETE   6.3    2016/04/13 10:29:26      4369      1414
        CTDEDIT  5.0.4  2016/04/19 08:35:29      1414      1354
        CALIB    11.8.1 2016/04/20 11:34:44      1354      1354
        FILTERS  4.3    2016/04/20 11:35:36      1354      1354
        BINAVE   4.2    2016/04/20 11:48:38      1354        52
        REMOVECH 8.2    2016/04/20 11:48:43        52        52
        HDREDIT2 3.0.2  2016/04/20 12:06:03 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2016/04/12 14:21:26 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:URU:Seapoint
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 24.00
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 50.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    45.59 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT  v5.0.4   2016/04/19 08:35:29
             60 records were deleted in this editing session.
             32 changes in channel Salinity:T0:C0
        -CALIB parameters: 2016/04/20 11:34:44
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         12 Salinity:T0:C0                PSS-78     10 -0.2000000E-02  0.1000000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2016/04/20 11:48:43
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Secondary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Status:Pump
          Salinity:T1:C1 [PSS-78]
          Flag
        -HEADER EDITS: 2016/04/20 12:06:03
         Applied edit header: P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  4: pH:SBE:Nominal [n/a]
           Name:   pH:SBE ==> pH:SBE:Nominal
           Units:  pH Units ==> n/a
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\CTD Data\2015-15\2015-15-0353.hex
      Software Version Seasave V 7.21d
      Temperature SN = 4752
      Conductivity SN = 3396
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Jul 18 2015 12:15:50
      NMEA Latitude = 50 41.46 N
      NMEA Longitude = 127 09.95 W
      NMEA UTC (Time) = Jul 18 2015  19:12:43
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      Latitude/Longitude added to scan
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ship: W.E. Ricker 2015-15
       Station: QCST 04
       Operator: HM
       Depth: 65 m
      System UTC = Jul 18 2015 19:15:50
    # nquan = 14
    # nvalues = 4369
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = flSP: Fluorescence, Seapoint
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = ph: pH
    # name 9 = dz/dtM: Descent Rate [m/s]
    # name 10 = pumps: Pump Status
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sal11: Salinity, Practical, 2 [PSU]
    # name 13 = flag: flag
    # span 0 =          1,       4369
    # span 1 =      3.391,     55.586
    # span 2 =     9.9200,    11.2844
    # span 3 =     9.9226,    11.2865
    # span 4 =   3.500803,   3.542713
    # span 5 =   3.538310,   3.576950
    # span 6 = 5.3724e-01, 7.5824e+00
    # span 7 =     0.0000,     0.0000
    # span 8 =      7.913,      8.068
    # span 9 =     -1.176,      1.089
    # span 10 =          0,          1
    # span 11 =    31.0895,    31.9668
    # span 12 =    31.4287,    32.3406
    # span 13 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Jul 18 2015 19:12:43 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4752</SerialNumber>
    #       <CalibrationDate>23-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35902423e-003</G>
    #       <H>6.36413981e-004</H>
    #       <I>2.06309769e-005</I>
    #       <J>1.71365270e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>19-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91941065e+000</G>
    #         <H>1.31439274e+000</H>
    #         <I>3.00845560e-005</I>
    #         <J>6.13621985e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0585</SerialNumber>
    #       <CalibrationDate>30-Dec-13</CalibrationDate>
    #       <C1>-3.951550e+004</C1>
    #       <C2>-4.415130e-001</C2>
    #       <C3>1.282560e-002</C3>
    #       <D1>3.560600e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.030045e+001</T1>
    #       <T2>-4.415690e-004</T2>
    #       <T3>4.342710e-006</T3>
    #       <T4>1.736800e-009</T4>
    #       <Slope>0.99994600</Slope>
    #       <Offset>-2.11246</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.288270e-002</AD590M>
    #       <AD590B>-8.164490e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2449</SerialNumber>
    #       <CalibrationDate>06-Apr-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35517974e-003</G>
    #       <H>6.43485967e-004</H>
    #       <I>2.33381062e-005</I>
    #       <J>2.21338578e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2399</SerialNumber>
    #       <CalibrationDate>17-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.08277491e+001</G>
    #         <H>1.61475240e+000</H>
    #         <I>1.24520243e-003</I>
    #         <J>1.93505039e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1119</SerialNumber>
    #       <CalibrationDate>21-Jan-14</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.4901e-001</Soc>
    #         <offset>-0.5263</offset>
    #         <A>-1.9196e-003</A>
    #         <B> 8.5361e-005</B>
    #         <C>-1.2856e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.0400</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>3685</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0851</SerialNumber>
    #       <CalibrationDate>Sept 4th 2014</CalibrationDate>
    #       <Slope>4.6134</Slope>
    #       <Offset>2.5497</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 06 2015 12:16:10, 7.23.2 [datcnv_vars = 11]
    # datcnv_in = P:\Cruise_Data_Processing\2015-15\RAW\CTD\2015-15-0353.hex P:\Crui
    se_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Nov 16 2015 17:18:29, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2015-15\Processing\convert\2015-15-035
    3.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # celltm_date = Nov 16 2015 17:21:43, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2015-15\Processing\wildedit\2015-15-0353
    .cnv
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Nov 16 2015 17:28:08, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2015-15\Processing\celltm\2015-15-0353.c
    nv P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove some records corrupted by shed wakes;
     salinity was cleaned.

    ----------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    Fluorescence and pH data are nominal and unedited except that
      some records were removed in editing temperature and salinity.

    Recalibration of channel Salinity:T0:C0 was based on a post-cruise
      calibration and a comparison with bottle samples. Stops for
      bottles were often very short and there was a cruise between this
      one and the post-cruise calibration, but the salinity is likely
      good to +/- 0.002.

    A dissolved oxygen sensor was mounted but no data were acquired.

    WARNING: The pH:SBE:Nominal data should be used with caution; no field
      calibration data were collected.  Calibration is required for each cast to get
      absolute values, although general trends within a cast are likely real.

    For details on the processing see the report: 2015-15_Processing_Report.doc.

    ----------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name             Units    Fmla Pad    Coefficients
    !   ---------------- -------- ---- ------ ------------
        Salinity:T0:C0   PSS-78     10 -99    () (-0.2E-02 1)
    $END
!--1--- ---2---- ---3--- ---4--- ---5---- -6--
!Pressu Temperat Fluores pH:SBE: Salinity Numb
!re     ure:     cence:  Nominal :T0:C0   er_o
!       Primary  URU:                     ~bin
!                Seapoin                  _rec
!                t                        ords
!------ -------- ------- ------- -------- ----
*END OF HEADER
    4.0  11.0320   4.291   7.992  31.1821   28
    5.0  10.9918   3.794   8.005  31.1875   33
    6.0  10.9636   5.396   8.002  31.1929   25
    7.0  10.9222   5.128   7.998  31.1988   24
    8.0  10.8816   6.290   7.995  31.2042   25
    9.0  10.8557   5.367   7.990  31.2211   25
   10.0  10.8122   4.777   7.987  31.2438   27
   11.0  10.7652   3.962   7.981  31.2617   28
   12.0  10.7254   3.841   7.978  31.2753   23
   13.0  10.7008   3.807   7.975  31.2819   25
   14.0  10.6954   3.481   7.971  31.2829   25
   15.0  10.6353   2.810   7.966  31.3099   25
   16.0  10.6008   2.886   7.963  31.3444   25
   17.0  10.5830   2.685   7.961  31.3789   23
   18.0  10.5803   2.492   7.959  31.3850   24
   19.0  10.5753   2.532   7.958  31.3908   26
   20.0  10.5680   2.253   7.958  31.3995   29
   21.0  10.5670   2.273   7.958  31.4007   32
   22.0  10.5664   2.703   7.958  31.4016   25
   23.0  10.5600   2.417   7.958  31.4093   23
   24.0  10.5578   2.464   7.958  31.4140   22
   25.0  10.5515   2.386   7.959  31.4227   25
   26.0  10.5428   2.477   7.959  31.4343   28
   27.0  10.5204   2.087   7.958  31.4587   28
   28.0  10.4141   1.852   7.950  31.5696   26
   29.0  10.3097   1.457   7.944  31.6648   21
   30.0  10.2685   1.345   7.940  31.7004   25
   31.0  10.2588   1.193   7.940  31.7087   24
   32.0  10.2487   1.222   7.937  31.7179   26
   33.0  10.2354   1.106   7.937  31.7392   23
   34.0  10.2269   0.913   7.937  31.7592   28
   35.0  10.2249   0.872   7.936  31.7644   25
   36.0  10.2240   0.866   7.936  31.7653   23
   37.0  10.2247   0.880   7.936  31.7645   22
   38.0  10.2260   1.026   7.936  31.7699   24
   39.0  10.2279   0.919   7.936  31.7719   25
   40.0  10.2284   0.812   7.937  31.7751   27
   41.0  10.2270   0.869   7.937  31.7782   29
   42.0  10.2199   0.836   7.937  31.7845   27
   43.0  10.2117   0.899   7.937  31.7885   21
   44.0  10.2019   0.929   7.936  31.7928   23
   45.0  10.1841   1.070   7.936  31.8026   21
   46.0  10.1721   1.092   7.936  31.8072   26
   47.0  10.1647   1.027   7.936  31.8141   28
   48.0  10.1616   1.098   7.936  31.8164   27
   49.0  10.1596   0.973   7.935  31.8182   24
   50.0  10.1604   1.027   7.934  31.8166   22
   51.0  10.1559   1.120   7.934  31.8198   20
   52.0  10.1650   0.912   7.933  31.8137   27
   53.0  10.1366   1.137   7.931  31.8305   26
   54.0  10.0983   0.972   7.930  31.8511   32
   55.0   9.9473   0.814   7.924  31.9473   27