*2016/04/20 12:06:02.40
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2015/07/14 22:20:26.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 53
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 35F6E3A1
    NUMBER OF CHANNELS  : 6

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Pressure                    decibar         3.977161       55.55527
       2 Temperature:Primary         'deg C (ITS90)' 8.812063       14.87429
       3 Fluorescence:URU:Seapoint   mg/m^3          0.1873636      2.867571
       4 pH:SBE:Nominal              n/a             7.681364       8.288174
       5 Salinity:T0:C0              PSS-78          31.52976       32.56729
       6 Number_of_bin_records       n/a             11             108
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        8  F       ' '     3
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2015-15\Pro
    $END

*ADMINISTRATION
    MISSION             : 2015-15
    AGENCY              : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C.
    COUNTRY             : Canada
    PROJECT             : High Seas Salmon
    SCIENTIST           : Thiess M.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : Juan de Fuca Strait / WCVI / Johnstone Strait
    STATION             : VI 12
    EVENT NUMBER        : 272
    LATITUDE            :  49  35.09000 N  ! (deg min)
    LONGITUDE           : 126  55.61000 W  ! (deg min)
    WATER DEPTH         : 66

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0585

    $TABLE: SENSORS
    !   Name                           Abs Depth       Serial No
    !   -----------------------------  --------------  ----------
        Temperature                    ' '             4752
        Conductivity                   ' '             3396
        'Pressure:Digiquartz with TC'  ' '             0585
        Temperature:2                  ' '             2449
        Conductivity:2                 ' '             2399
        'Oxygen:SBE 43'                ' '             1119
        Fluorometer:Seapoint           ' '             3685
        pH                             ' '             0851
    $END
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21D
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.4.1  2016/04/12 14:20:30      4009      4009
        CLEAN    5.2.1  2016/04/12 14:21:58      4009      4009
        SHIFTDAT 3.4    2016/04/12 16:46:45      4009      4009
        SHIFTDAT 3.4    2016/04/12 17:34:13      4009      4009
        SHIFTDAT 3.4    2016/04/13 10:23:53      4009      4009
        DELETE   6.3    2016/04/13 10:28:54      4009      1555
        CTDEDIT  5.0.4  2016/04/18 10:26:48      1555      1448
        CALIB    11.8.1 2016/04/20 11:34:24      1448      1448
        FILTERS  4.3    2016/04/20 11:35:19      1448      1448
        BINAVE   4.2    2016/04/20 11:48:29      1448        53
        REMOVECH 8.2    2016/04/20 11:48:41        53        53
        HDREDIT2 3.0.2  2016/04/20 12:06:02 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2016/04/12 14:21:26 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:URU:Seapoint
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 24.00
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 50.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    45.70 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT  v5.0.4   2016/04/18 10:26:48
            107 records were deleted in this editing session.
             39 changes in channel Salinity:T0:C0
        -CALIB parameters: 2016/04/20 11:34:24
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         12 Salinity:T0:C0                PSS-78     10 -0.2000000E-02  0.1000000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2016/04/20 11:48:41
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Secondary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Status:Pump
          Salinity:T1:C1 [PSS-78]
          Flag
        -HEADER EDITS: 2016/04/20 12:06:02
         Applied edit header: P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  4: pH:SBE:Nominal [n/a]
           Name:   pH:SBE ==> pH:SBE:Nominal
           Units:  pH Units ==> n/a
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\CTD Data\2015-15\2015-15-0272.hex
      Software Version Seasave V 7.21d
      Temperature SN = 4752
      Conductivity SN = 3396
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Jul 14 2015 15:23:27
      NMEA Latitude = 49 35.09 N
      NMEA Longitude = 126 55.61 W
      NMEA UTC (Time) = Jul 14 2015  22:20:26
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      Latitude/Longitude added to scan
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ship: W.E. Ricker 2015-15
       Station: VI 12
       Operator: HM
       Depth: 66 m
      System UTC = Jul 14 2015 22:23:27
    # nquan = 14
    # nvalues = 4009
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = flSP: Fluorescence, Seapoint
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = ph: pH
    # name 9 = dz/dtM: Descent Rate [m/s]
    # name 10 = pumps: Pump Status
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sal11: Salinity, Practical, 2 [PSU]
    # name 13 = flag: flag
    # span 0 =          1,       4009
    # span 1 =      3.388,     55.700
    # span 2 =     8.8019,    14.8874
    # span 3 =     8.8054,    14.8848
    # span 4 =   3.464770,   3.899485
    # span 5 =   3.508631,   3.945804
    # span 6 = 1.4652e-01, 3.4799e+00
    # span 7 =     0.0000,     0.0000
    # span 8 =      7.675,      8.294
    # span 9 =     -1.423,      1.416
    # span 10 =          0,          1
    # span 11 =    31.4791,    32.5795
    # span 12 =    31.9188,    33.0150
    # span 13 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Jul 14 2015 22:20:26 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4752</SerialNumber>
    #       <CalibrationDate>23-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35902423e-003</G>
    #       <H>6.36413981e-004</H>
    #       <I>2.06309769e-005</I>
    #       <J>1.71365270e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>19-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91941065e+000</G>
    #         <H>1.31439274e+000</H>
    #         <I>3.00845560e-005</I>
    #         <J>6.13621985e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0585</SerialNumber>
    #       <CalibrationDate>30-Dec-13</CalibrationDate>
    #       <C1>-3.951550e+004</C1>
    #       <C2>-4.415130e-001</C2>
    #       <C3>1.282560e-002</C3>
    #       <D1>3.560600e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.030045e+001</T1>
    #       <T2>-4.415690e-004</T2>
    #       <T3>4.342710e-006</T3>
    #       <T4>1.736800e-009</T4>
    #       <Slope>0.99994600</Slope>
    #       <Offset>-2.11246</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.288270e-002</AD590M>
    #       <AD590B>-8.164490e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2449</SerialNumber>
    #       <CalibrationDate>06-Apr-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35517974e-003</G>
    #       <H>6.43485967e-004</H>
    #       <I>2.33381062e-005</I>
    #       <J>2.21338578e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2399</SerialNumber>
    #       <CalibrationDate>17-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.08277491e+001</G>
    #         <H>1.61475240e+000</H>
    #         <I>1.24520243e-003</I>
    #         <J>1.93505039e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1119</SerialNumber>
    #       <CalibrationDate>21-Jan-14</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.4901e-001</Soc>
    #         <offset>-0.5263</offset>
    #         <A>-1.9196e-003</A>
    #         <B> 8.5361e-005</B>
    #         <C>-1.2856e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.0400</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>3685</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0851</SerialNumber>
    #       <CalibrationDate>Sept 4th 2014</CalibrationDate>
    #       <Slope>4.6134</Slope>
    #       <Offset>2.5497</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 06 2015 12:15:45, 7.23.2 [datcnv_vars = 11]
    # datcnv_in = P:\Cruise_Data_Processing\2015-15\RAW\CTD\2015-15-0272.hex P:\Crui
    se_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Nov 16 2015 17:18:18, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2015-15\Processing\convert\2015-15-027
    2.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # celltm_date = Nov 16 2015 17:21:33, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2015-15\Processing\wildedit\2015-15-0272
    .cnv
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Nov 16 2015 17:27:55, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2015-15\Processing\celltm\2015-15-0272.c
    nv P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove records corrupted by shed wakes near the top
     and bottom of the cast; salinity was cleaned.

    ----------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    Fluorescence and pH data are nominal and unedited except that
      some records were removed in editing temperature and salinity.

    Recalibration of channel Salinity:T0:C0 was based on a post-cruise
      calibration and a comparison with bottle samples. Stops for
      bottles were often very short and there was a cruise between this
      one and the post-cruise calibration, but the salinity is likely
      good to +/- 0.002.

    A dissolved oxygen sensor was mounted but no data were acquired.

    WARNING: The pH:SBE:Nominal data should be used with caution; no field
      calibration data were collected.  Calibration is required for each cast to get
      absolute values, although general trends within a cast are likely real.

    For details on the processing see the report: 2015-15_Processing_Report.doc.

    ----------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name             Units    Fmla Pad    Coefficients
    !   ---------------- -------- ---- ------ ------------
        Salinity:T0:C0   PSS-78     10 -99    () (-0.2E-02 1)
    $END
!--1--- ---2---- ---3--- ---4--- ---5---- -6--
!Pressu Temperat Fluores pH:SBE: Salinity Numb
!re     ure:     cence:  Nominal :T0:C0   er_o
!       Primary  URU:                     ~bin
!                Seapoin                  _rec
!                t                        ords
!------ -------- ------- ------- -------- ----
*END OF HEADER
    4.0  14.8743   1.085   8.282  31.5303  108
    5.0  14.8598   1.074   8.282  31.5308   28
    6.0  14.8523   1.323   8.283  31.5298   23
    7.0  14.8442   1.531   8.284  31.5300   25
    8.0  14.8235   1.721   8.288  31.5300   23
    9.0  14.7545   1.820   8.287  31.5305   24
   10.0  14.1553   2.038   8.254  31.5838   26
   11.0  13.2899   2.164   8.219  31.6681   23
   12.0  13.2340   1.978   8.192  31.6714   23
   13.0  13.1996   2.165   8.177  31.6770   27
   14.0  13.1839   2.048   8.166  31.6798   33
   15.0  13.1412   2.211   8.156  31.6879   28
   16.0  13.0562   1.873   8.145  31.7025   25
   17.0  13.0188   1.764   8.135  31.7086   22
   18.0  12.9962   2.145   8.126  31.7133   20
   19.0  12.9663   2.218   8.120  31.7170   20
   20.0  12.9509   1.771   8.116  31.7192   23
   21.0  12.9297   1.928   8.112  31.7217   27
   22.0  12.9230   1.796   8.109  31.7232   30
   23.0  12.9052   1.718   8.107  31.7253   31
   24.0  12.7683   2.168   8.092  31.7327   32
   25.0  11.9837   2.616   8.055  31.8116   25
   26.0  11.7195   2.868   8.033  31.8505   21
   27.0  11.7898   2.432   8.017  31.8952   20
   28.0  11.5948   2.326   8.001  31.9803   21
   29.0  11.4148   2.161   7.986  32.0182   26
   30.0  11.3488   2.110   7.975  32.0443   27
   31.0  11.3262   2.214   7.966  32.0552   28
   32.0  11.3154   2.017   7.959  32.0606   26
   33.0  11.2915   2.065   7.954  32.0660   29
   34.0  11.2571   2.233   7.947  32.0840   34
   35.0  11.0753   2.191   7.929  32.1161   26
   36.0  10.9427   2.125   7.915  32.1186   18
   37.0  10.8734   1.991   7.906  32.1526   17
   38.0  10.8029   1.804   7.891  32.1831   19
   39.0  10.6102   1.708   7.871  32.2336   25
   40.0  10.0976   1.483   7.847  32.3202   33
   41.0   9.9490   1.232   7.814  32.3795   30
   42.0   9.6152   0.989   7.790  32.4499   29
   43.0   9.3063   0.660   7.774  32.4523   28
   44.0   9.1640   0.548   7.761  32.4365   25
   45.0   9.2287   0.620   7.750  32.4658   22
   46.0   9.2868   0.616   7.742  32.4906   22
   47.0   9.2751   0.557   7.735  32.5034   21
   48.0   9.2074   0.495   7.730  32.5125   27
   49.0   9.0925   0.431   7.724  32.5258   31
   50.0   9.0285   0.356   7.717  32.5343   27
   51.0   8.9492   0.284   7.711  32.5472   21
   52.0   8.9245   0.301   7.706  32.5606   21
   53.0   8.8711   0.274   7.702  32.5673   23
   54.1   8.8460   0.349   7.697  32.5661   47
   55.0   8.8214   0.222   7.688  32.5660   41
   55.6   8.8121   0.187   7.681  32.5659   11