*2016/04/20 12:06:01.09
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2015/07/08 14:40:19.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 49
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 6DEB246D
    NUMBER OF CHANNELS  : 6

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Pressure                    decibar         3.494          50.665
       2 Temperature:Primary         'deg C (ITS90)' 10.98722       14.8237
       3 Fluorescence:URU:Seapoint   mg/m^3          0.2719615      2.755615
       4 pH:SBE:Nominal              n/a             7.623263       7.914077
       5 Salinity:T0:C0              PSS-78          28.4022        29.92192
       6 Number_of_bin_records       n/a             1              51
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        8  F       ' '     3
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        9  F       ' '     4
       6  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2015-15\Pro
    $END

*ADMINISTRATION
    MISSION             : 2015-15
    AGENCY              : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia
    SCIENTIST           : Neville C.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : SET 117
    EVENT NUMBER        : 195
    LATITUDE            :  48  43.89000 N  ! (deg min)
    LONGITUDE           : 123  33.32000 W  ! (deg min)
    WATER DEPTH         : 60

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0585

    $TABLE: SENSORS
    !   Name                           Abs Depth       Serial No
    !   -----------------------------  --------------  ----------
        Temperature                    ' '             4752
        Conductivity                   ' '             3396
        'Pressure:Digiquartz with TC'  ' '             0585
        Temperature:2                  ' '             2449
        Conductivity:2                 ' '             2399
        'Oxygen:SBE 43'                ' '             1119
        Fluorometer:Seapoint           ' '             3685
        pH                             ' '             0851
    $END
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21D
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.4.1  2016/04/12 13:51:51      4917      4917
        CLEAN    5.2.1  2016/04/12 13:59:14      4917      4917
        SHIFTDAT 3.4    2016/04/12 16:46:05      4917      4917
        SHIFTDAT 3.4    2016/04/12 17:33:30      4917      4917
        SHIFTDAT 3.4    2016/04/13 10:23:12      4917      4917
        DELETE   6.3    2016/04/13 10:28:24      4917      1522
        CTDEDIT  5.0.4  2016/04/14 10:54:28      1522      1451
        CALIB    11.8.1 2016/04/20 11:34:05      1451      1451
        FILTERS  4.3    2016/04/20 11:35:00      1451      1451
        BINAVE   4.2    2016/04/20 11:48:20      1451        49
        REMOVECH 8.2    2016/04/20 11:48:40        49        49
        HDREDIT2 3.0.2  2016/04/20 12:06:01 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2016/04/12 13:57:12 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:URU:Seapoint
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 24.00
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 50.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    40.91 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT  v5.0.4   2016/04/14 10:54:28
             71 records were deleted in this editing session.
             23 changes in channel Salinity:T0:C0
        -CALIB parameters: 2016/04/20 11:34:05
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         12 Salinity:T0:C0                PSS-78     10 -0.2000000E-02  0.1000000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2016/04/20 11:48:40
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Secondary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Status:Pump
          Salinity:T1:C1 [PSS-78]
          Flag
        -HEADER EDITS: 2016/04/20 12:06:01
         Applied edit header: P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  4: pH:SBE:Nominal [n/a]
           Name:   pH:SBE ==> pH:SBE:Nominal
           Units:  pH Units ==> n/a
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\CTD Data\2015-15\2015-15-0195.hex
      Software Version Seasave V 7.21d
      Temperature SN = 4752
      Conductivity SN = 3396
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Jul 08 2015 07:44:28
      NMEA Latitude = 48 43.89 N
      NMEA Longitude = 123 33.32 W
      NMEA UTC (Time) = Jul 08 2015  14:40:19
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      Latitude/Longitude added to scan
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ship: W.E. Ricker 2015-15
       Station: Set 117
       Operator: Thiess
       Depth: 60 m
      System UTC = Jul 08 2015 14:44:28
    # nquan = 14
    # nvalues = 4917
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = flSP: Fluorescence, Seapoint
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = ph: pH
    # name 9 = dz/dtM: Descent Rate [m/s]
    # name 10 = pumps: Pump Status
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sal11: Salinity, Practical, 2 [PSU]
    # name 13 = flag: flag
    # span 0 =          1,       4917
    # span 1 =      0.568,     50.911
    # span 2 =    10.9844,    15.9013
    # span 3 =    10.9878,    15.9465
    # span 4 =   3.391820,   3.575291
    # span 5 =   3.419477,   3.594333
    # span 6 = 0.0000e+00, 5.3114e+00
    # span 7 =     0.0000,     0.0000
    # span 8 =      7.614,      8.024
    # span 9 =     -0.939,      0.955
    # span 10 =          0,          1
    # span 11 =    27.4521,    29.9261
    # span 12 =    27.6987,    30.1935
    # span 13 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Jul 08 2015 14:40:19 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4752</SerialNumber>
    #       <CalibrationDate>23-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35902423e-003</G>
    #       <H>6.36413981e-004</H>
    #       <I>2.06309769e-005</I>
    #       <J>1.71365270e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>19-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91941065e+000</G>
    #         <H>1.31439274e+000</H>
    #         <I>3.00845560e-005</I>
    #         <J>6.13621985e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0585</SerialNumber>
    #       <CalibrationDate>30-Dec-13</CalibrationDate>
    #       <C1>-3.951550e+004</C1>
    #       <C2>-4.415130e-001</C2>
    #       <C3>1.282560e-002</C3>
    #       <D1>3.560600e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.030045e+001</T1>
    #       <T2>-4.415690e-004</T2>
    #       <T3>4.342710e-006</T3>
    #       <T4>1.736800e-009</T4>
    #       <Slope>0.99994600</Slope>
    #       <Offset>-2.11246</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.288270e-002</AD590M>
    #       <AD590B>-8.164490e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2449</SerialNumber>
    #       <CalibrationDate>06-Apr-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35517974e-003</G>
    #       <H>6.43485967e-004</H>
    #       <I>2.33381062e-005</I>
    #       <J>2.21338578e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2399</SerialNumber>
    #       <CalibrationDate>17-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.08277491e+001</G>
    #         <H>1.61475240e+000</H>
    #         <I>1.24520243e-003</I>
    #         <J>1.93505039e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1119</SerialNumber>
    #       <CalibrationDate>21-Jan-14</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.4901e-001</Soc>
    #         <offset>-0.5263</offset>
    #         <A>-1.9196e-003</A>
    #         <B> 8.5361e-005</B>
    #         <C>-1.2856e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.0400</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>3685</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0851</SerialNumber>
    #       <CalibrationDate>Sept 4th 2014</CalibrationDate>
    #       <Slope>4.6134</Slope>
    #       <Offset>2.5497</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 06 2015 12:15:20, 7.23.2 [datcnv_vars = 11]
    # datcnv_in = P:\Cruise_Data_Processing\2015-15\RAW\CTD\2015-15-0195.hex P:\Crui
    se_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Nov 16 2015 17:18:07, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2015-15\Processing\convert\2015-15-019
    5.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # celltm_date = Nov 16 2015 17:21:21, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2015-15\Processing\wildedit\2015-15-0195
    .cnv
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Nov 16 2015 17:27:43, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2015-15\Processing\celltm\2015-15-0195.c
    nv P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove a few records near the top of the cast;
     salinity was cleaned  lightly.

    ----------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    Fluorescence and pH data are nominal and unedited except that
      some records were removed in editing temperature and salinity.

    Recalibration of channel Salinity:T0:C0 was based on a post-cruise
      calibration and a comparison with bottle samples. Stops for
      bottles were often very short and there was a cruise between this
      one and the post-cruise calibration, but the salinity is likely
      good to +/- 0.002.

    A dissolved oxygen sensor was mounted but no data were acquired.

    WARNING: The pH:SBE:Nominal data should be used with caution; no field
      calibration data were collected.  Calibration is required for each cast to get
      absolute values, although general trends within a cast are likely real.

    For details on the processing see the report: 2015-15_Processing_Report.doc.

    ----------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name             Units    Fmla Pad    Coefficients
    !   ---------------- -------- ---- ------ ------------
        Salinity:T0:C0   PSS-78     10 -99    () (-0.2E-02 1)
    $END
!--1--- ---2---- ---3--- ---4--- ---5---- -6--
!Pressu Temperat Fluores pH:SBE: Salinity Numb
!re     ure:     cence:  Nominal :T0:C0   er_o
!       Primary  URU:                     ~bin
!                Seapoin                  _rec
!                t                        ords
!------ -------- ------- ------- -------- ----
*END OF HEADER
    3.5  14.8237   2.698   7.912  28.4022    1
    4.0  14.7105   2.756   7.914  28.4064   13
    5.1  14.3310   2.535   7.897  28.4596   33
    6.0  14.2455   2.381   7.882  28.4725   37
    7.0  14.2456   2.431   7.875  28.4747   32
    8.0  14.2083   2.343   7.870  28.4810   32
    9.0  14.1904   2.186   7.866  28.4842   30
   10.0  14.1853   2.204   7.864  28.4843   30
   11.0  14.1826   2.143   7.863  28.4851   33
   12.0  14.1542   2.067   7.862  28.4894   31
   13.0  14.1367   1.915   7.859  28.4924   31
   14.0  14.0766   1.896   7.858  28.5037   32
   15.0  14.0342   1.810   7.855  28.5129   29
   16.0  13.9697   1.695   7.855  28.5356   29
   17.0  13.6342   1.329   7.846  28.6598   28
   18.0  13.2358   1.124   7.833  28.8261   30
   19.0  12.9995   0.942   7.817  28.9065   31
   20.0  12.9245   0.849   7.803  28.9239   30
   21.0  12.7419   0.640   7.789  28.9977   30
   22.0  12.4700   0.529   7.770  29.1099   30
   23.0  12.3524   0.457   7.756  29.1569   28
   24.0  12.2912   0.479   7.744  29.1758   28
   25.0  12.1450   0.495   7.732  29.2441   29
   26.0  12.0823   0.402   7.722  29.2766   26
   27.0  11.9831   0.395   7.713  29.3209   26
   28.0  11.9241   0.386   7.706  29.3456   27
   29.0  11.8899   0.528   7.700  29.3674   26
   30.0  11.8703   0.409   7.696  29.3769   26
   31.0  11.8513   0.401   7.692  29.3860   26
   32.0  11.8282   0.370   7.687  29.3977   26
   33.0  11.7415   0.327   7.684  29.4452   26
   34.0  11.6850   0.321   7.679  29.4749   26
   35.0  11.6415   0.293   7.675  29.4975   26
   36.0  11.5922   0.338   7.670  29.5229   25
   37.0  11.5434   0.300   7.666  29.5506   27
   38.0  11.5021   0.272   7.664  29.5735   26
   39.0  11.4725   0.333   7.660  29.5889   28
   40.0  11.4260   0.296   7.656  29.6164   28
   41.0  11.3992   0.279   7.655  29.6318   28
   42.0  11.3820   0.310   7.651  29.6498   31
   43.0  11.3168   0.360   7.649  29.7053   34
   44.0  11.2200   0.415   7.646  29.7738   33
   45.0  11.1731   0.314   7.643  29.7978   35
   46.0  11.1139   0.283   7.640  29.8353   36
   47.0  11.0414   0.283   7.637  29.8839   33
   48.0  11.0088   0.278   7.634  29.9062   40
   49.0  11.0039   0.327   7.630  29.9102   51
   50.0  10.9905   0.325   7.627  29.9193   48
   50.7  10.9872   0.336   7.623  29.9219   19