*2016/04/20 12:05:58.53
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2015/06/24 14:22:55.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 248
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : D804AFCE
    NUMBER OF CHANNELS  : 3

    $TABLE: CHANNELS
    ! No Name                    Units     Minimum        Maximum
    !--- ----------------------- --------- -------------- --------------
       1 Pressure                decibar   4.345205       250.69
       2 pH:SBE:Nominal          n/a       7.419762       7.914778
       3 Number_of_bin_records   n/a       21             194
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        8  F       ' '     3
       3  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2015-15\Pro
    $END

*ADMINISTRATION
    MISSION             : 2015-15
    AGENCY              : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C.
    COUNTRY             : Canada
    PROJECT             : Strait of Georgia
    SCIENTIST           : Neville C.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia
    STATION             : SET 1
    EVENT NUMBER        : 2
    LATITUDE            :  49  12.34000 N  ! (deg min)
    LONGITUDE           : 123  40.25000 W  ! (deg min)
    WATER DEPTH         : 368

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0585

    $TABLE: SENSORS
    !   Name                           Abs Depth       Serial No
    !   -----------------------------  --------------  ----------
        Temperature                    ' '             4752
        Conductivity                   ' '             3396
        'Pressure:Digiquartz with TC'  ' '             0585
        Temperature:2                  ' '             2449
        Conductivity:2                 ' '             2399
        'Oxygen:SBE 43'                ' '             1119
        Fluorometer:Seapoint           ' '             3685
        pH                             ' '             0851
    $END
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21D
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.4.1  2016/04/12 13:49:50     19154     19154
        CLEAN    5.2.1  2016/04/12 13:57:12     19154     19154
        SHIFTDAT 3.4    2016/04/12 16:44:10     19154     19154
        SHIFTDAT 3.4    2016/04/12 17:31:30     19154     19154
        SHIFTDAT 3.4    2016/04/13 10:21:16     19154     19154
        DELETE   6.3    2016/04/13 10:26:58     19154      7987
        CALIB    11.8.1 2016/04/20 11:33:12      7987      7987
        FILTERS  4.3    2016/04/20 11:34:09      7987      7987
        BINAVE   4.2    2016/04/20 11:47:54      7987       248
        REMOVECH 8.2    2016/04/20 11:48:37       248       248
        HDREDIT2 3.0.2  2016/04/20 12:05:58 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2016/04/12 13:57:12
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:URU:Seapoint
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 24.00
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 50.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.70
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to   240.98 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CALIB parameters: 2016/04/20 11:33:12
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         12 Salinity:T0:C0                PSS-78     10 -0.2000000E-02  0.1000000E+01
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2016/04/20 11:48:37
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Primary [deg C (ITS90)]
          Temperature:Secondary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Fluorescence:URU:Seapoint [mg/m^3]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Status:Pump
          Salinity:T0:C0 [PSS-78]
          Salinity:T1:C1 [PSS-78]
          Flag
        -HEADER EDITS: 2016/04/20 12:05:58
         Applied edit header: P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  2: pH:SBE:Nominal [n/a]
           Name:   pH:SBE ==> pH:SBE:Nominal
           Units:  pH Units ==> n/a
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\CTD Data\2015-15\2015-15-0002.hex
      Software Version Seasave V 7.21d
      Temperature SN = 4752
      Conductivity SN = 3396
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Jun 24 2015 06:56:15
      NMEA Latitude = 49 12.34 N
      NMEA Longitude = 123 40.25 W
      NMEA UTC (Time) = Jun 24 2015  14:22:55
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      Latitude/Longitude added to scan
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ship: W.E. Ricker 2015-15
       Station: Set 1
       Operator: Thiess
       Depth: 368m
      System UTC = Jun 24 2015 13:56:15
    # nquan = 14
    # nvalues = 19154
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = flSP: Fluorescence, Seapoint
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = ph: pH
    # name 9 = dz/dtM: Descent Rate [m/s]
    # name 10 = pumps: Pump Status
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sal11: Salinity, Practical, 2 [PSU]
    # name 13 = flag: flag
    # span 0 =          1,      19154
    # span 1 =      0.116,    250.980
    # span 2 =     9.1249,    15.1219
    # span 3 =     9.1263,    14.8686
    # span 4 =   0.102902,   3.377488
    # span 5 =   0.430332,   3.597386
    # span 6 = 0.0000e+00, 8.2173e+00
    # span 7 =     0.0000,     0.0000
    # span 8 =      7.410,      8.027
    # span 9 =     -1.017,      1.038
    # span 10 =          0,          0
    # span 11 =     0.6667,    30.9518
    # span 12 =     3.0652,    33.5610
    # span 13 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Jun 24 2015 14:22:55 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4752</SerialNumber>
    #       <CalibrationDate>23-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35902423e-003</G>
    #       <H>6.36413981e-004</H>
    #       <I>2.06309769e-005</I>
    #       <J>1.71365270e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>19-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91941065e+000</G>
    #         <H>1.31439274e+000</H>
    #         <I>3.00845560e-005</I>
    #         <J>6.13621985e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0585</SerialNumber>
    #       <CalibrationDate>30-Dec-13</CalibrationDate>
    #       <C1>-3.951550e+004</C1>
    #       <C2>-4.415130e-001</C2>
    #       <C3>1.282560e-002</C3>
    #       <D1>3.560600e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.030045e+001</T1>
    #       <T2>-4.415690e-004</T2>
    #       <T3>4.342710e-006</T3>
    #       <T4>1.736800e-009</T4>
    #       <Slope>0.99994600</Slope>
    #       <Offset>-2.11246</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.288270e-002</AD590M>
    #       <AD590B>-8.164490e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2449</SerialNumber>
    #       <CalibrationDate>06-Apr-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35517974e-003</G>
    #       <H>6.43485967e-004</H>
    #       <I>2.33381062e-005</I>
    #       <J>2.21338578e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2399</SerialNumber>
    #       <CalibrationDate>17-Jan-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.08277491e+001</G>
    #         <H>1.61475240e+000</H>
    #         <I>1.24520243e-003</I>
    #         <J>1.93505039e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1119</SerialNumber>
    #       <CalibrationDate>21-Jan-14</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.4901e-001</Soc>
    #         <offset>-0.5263</offset>
    #         <A>-1.9196e-003</A>
    #         <B> 8.5361e-005</B>
    #         <C>-1.2856e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.0400</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>3685</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0851</SerialNumber>
    #       <CalibrationDate>Sept 4th 2014</CalibrationDate>
    #       <Slope>4.6134</Slope>
    #       <Offset>2.5497</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 06 2015 12:14:25, 7.23.2 [datcnv_vars = 11]
    # datcnv_in = P:\Cruise_Data_Processing\2015-15\RAW\CTD\2015-15-0002.hex P:\Crui
    se_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Nov 16 2015 17:17:35, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2015-15\Processing\convert\2015-15-000
    2.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # celltm_date = Nov 16 2015 17:20:50, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2015-15\Processing\wildedit\2015-15-0002
    .cnv
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Nov 16 2015 17:27:05, 7.23.2 [derive_vars = 2]
    # Derive_in = P:\Cruise_Data_Processing\2015-15\Processing\celltm\2015-15-0002.c
    nv P:\Cruise_Data_Processing\2015-15\Processing\doc\2015-15-ctd.XMLCON
    # file_type = ascii
     END*

    ----------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    The pH data are nominal and unedited.

    The pumps did not come on for the first 2 casts; the only data in
      these files that are not pumped are the pH and pressure channels.  

    WARNING: The pH:SBE:Nominal data should be used with caution; no field
      calibration data were collected.  Calibration is required for each cast to get
      absolute values, although general trends within a cast are likely real.

    For details on the processing see the report: 2015-15_Processing_Report.doc.

    ----------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name             Units    Fmla Pad    Coefficients
    !   ---------------- -------- ---- ------ ------------
        Salinity:T0:C0   PSS-78     10 -99    () (-0.2E-02 1)
    $END
!--1--- ---2--- -3--
!Pressu pH:SBE: Numb
!re     Nominal er_o
!               ~bin
!               _rec
!               ords
!------ ------- ----
*END OF HEADER
    4.3   7.914   33
    4.9   7.915  194
    5.9   7.901   64
    7.0   7.885   38
    8.0   7.863   35
    9.0   7.847   34
   10.0   7.832   31
   11.0   7.815   32
   12.0   7.801   32
   13.0   7.784   34
   14.0   7.770   27
   15.0   7.760   31
   16.0   7.747   33
   16.9   7.735   29
   18.0   7.723   31
   19.0   7.711   30
   20.0   7.700   31
   21.0   7.689   31
   22.0   7.679   32
   23.0   7.668   32
   24.0   7.658   32
   25.0   7.649   32
   26.0   7.640   31
   27.0   7.632   31
   28.0   7.626   30
   29.0   7.619   30
   30.0   7.611   32
   31.0   7.603   32
   32.0   7.597   32
   33.0   7.593   32
   34.0   7.588   31
   35.0   7.584   30
   36.0   7.580   30
   37.0   7.576   31
   38.0   7.573   30
   39.0   7.569   32
   40.0   7.565   30
   41.0   7.561   31
   42.0   7.557   32
   43.0   7.553   31
   44.0   7.551   30
   45.0   7.546   30
   46.0   7.543   32
   47.0   7.539   32
   48.0   7.536   31
   49.0   7.532   30
   50.0   7.529   32
   51.0   7.526   31
   52.0   7.522   30
   53.0   7.518   30
   54.0   7.516   30
   55.0   7.513   31
   56.0   7.510   30
   57.0   7.508   31
   58.0   7.504   30
   59.0   7.501   30
   60.0   7.500   29
   61.0   7.496   30
   62.0   7.494   30
   63.0   7.490   30
   64.0   7.490   31
   65.0   7.487   31
   66.0   7.486   32
   67.0   7.483   31
   68.0   7.481   30
   69.0   7.480   30
   70.0   7.476   30
   71.0   7.476   29
   72.0   7.475   30
   73.0   7.472   30
   74.0   7.471   30
   75.0   7.471   30
   76.0   7.469   30
   77.0   7.467   30
   78.0   7.467   30
   79.0   7.467   29
   80.0   7.467   31
   81.0   7.465   30
   82.0   7.462   30
   83.0   7.462   31
   84.0   7.462   30
   85.0   7.462   32
   86.0   7.462   30
   87.0   7.461   30
   88.0   7.460   30
   89.0   7.459   30
   90.0   7.459   30
   91.0   7.458   29
   92.0   7.458   28
   93.0   7.457   31
   94.0   7.457   30
   95.0   7.458   31
   96.0   7.459   30
   97.0   7.461   29
   98.0   7.461   31
   99.0   7.462   30
  100.0   7.462   31
  101.0   7.462   30
  102.0   7.462   32
  103.0   7.462   30
  104.0   7.462   30
  105.0   7.462   29
  106.0   7.462   27
  107.0   7.462   29
  108.0   7.462   29
  109.0   7.463   30
  110.0   7.463   30
  111.0   7.465   30
  112.0   7.467   29
  113.0   7.466   30
  114.0   7.466   30
  115.0   7.467   23
  116.0   7.470   29
  117.0   7.471   29
  118.0   7.471   30
  119.0   7.472   30
  120.0   7.475   28
  121.0   7.476   30
  122.0   7.477   30
  123.0   7.480   29
  124.0   7.481   30
  125.0   7.481   30
  126.0   7.482   31
  127.0   7.484   31
  128.0   7.485   31
  129.0   7.486   31
  130.0   7.490   30
  131.0   7.490   30
  132.0   7.490   25
  133.0   7.490   31
  134.0   7.492   30
  135.0   7.493   30
  136.0   7.492   30
  137.0   7.490   31
  138.0   7.490   31
  139.0   7.490   30
  140.0   7.489   30
  141.0   7.487   32
  142.0   7.486   31
  143.0   7.486   30
  144.0   7.486   30
  145.0   7.485   30
  146.0   7.483   32
  147.0   7.482   30
  148.0   7.481   29
  149.0   7.481   30
  150.0   7.481   31
  151.0   7.481   29
  152.0   7.480   29
  153.0   7.479   30
  154.0   7.478   31
  155.0   7.476   31
  156.0   7.477   30
  157.0   7.476   29
  158.0   7.476   30
  159.0   7.476   29
  160.0   7.476   30
  161.0   7.476   29
  162.0   7.476   30
  163.0   7.474   31
  164.0   7.473   30
  165.0   7.472   29
  166.0   7.472   29
  167.0   7.472   29
  168.0   7.469   30
  169.0   7.467   29
  170.0   7.467   31
  171.0   7.467   29
  172.0   7.467   31
  173.0   7.465   30
  174.0   7.463   30
  175.0   7.462   30
  176.0   7.462   30
  177.0   7.461   31
  178.0   7.460   29
  179.0   7.459   31
  180.0   7.457   30
  181.0   7.457   29
  182.0   7.457   30
  183.0   7.457   30
  184.0   7.457   29
  185.0   7.457   31
  186.0   7.457   30
  187.0   7.457   30
  188.0   7.457   31
  189.0   7.457   30
  190.0   7.457   30
  191.0   7.457   31
  192.0   7.457   31
  193.0   7.456   31
  194.0   7.455   30
  195.0   7.453   30
  196.0   7.453   31
  197.0   7.449   30
  198.0   7.448   32
  199.0   7.447   31
  200.0   7.443   32
  201.0   7.443   31
  202.0   7.443   30
  203.0   7.443   29
  204.0   7.446   30
  205.0   7.448   31
  206.0   7.450   31
  207.0   7.453   30
  208.0   7.453   29
  209.0   7.453   28
  210.0   7.456   29
  211.0   7.456   29
  212.0   7.457   28
  213.0   7.457   29
  214.0   7.457   29
  215.0   7.457   27
  216.0   7.457   30
  217.0   7.456   30
  218.0   7.455   28
  219.0   7.454   27
  220.0   7.454   28
  221.0   7.453   30
  222.0   7.453   29
  223.0   7.453   30
  224.0   7.452   30
  225.0   7.450   31
  226.0   7.449   30
  227.0   7.448   31
  228.0   7.448   30
  229.0   7.447   31
  230.0   7.444   31
  231.0   7.443   31
  232.0   7.443   29
  233.0   7.440   30
  234.0   7.438   31
  235.0   7.438   31
  236.0   7.435   30
  237.0   7.434   30
  238.0   7.434   31
  239.0   7.433   33
  240.0   7.431   44
  241.0   7.429   51
  242.0   7.429   55
  243.0   7.427   54
  244.0   7.424   54
  245.0   7.424   55
  246.0   7.424   55
  247.0   7.423   54
  248.0   7.421   54
  249.0   7.420   55
  250.0   7.420   56
  250.7   7.420   21