*2016/01/05 15:14:14.39
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2015/08/02 23:17:30.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 31
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 62E55DB2
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Pressure                    decibar         4              34
       2 Temperature:Secondary       'deg C (ITS90)' 8.5649         15.5728
       3 Fluorescence:URU:Seapoint   mg/m^3          0.355          7.497
       4 Salinity:T1:C1              PSS-78          32.3711        33.1287
       5 Oxygen:Dissolved:SBE        mL/L            2.981          6.454
       6 Oxygen:Dissolved:SBE        umol/kg         129.748        281.4209
       7 pH:SBE:Nominal              n/a             7.948          8.502
       8 Number_of_bin_records       n/a             1              132
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        8  F       ' '     3
       4  -99   ' '        9  F       ' '     4
       5  -99   ' '        7  F       ' '     2
       6  -99   ' '        6  F       ' '     1
       7  -99   ' '        8  F       ' '     3
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2015-12\Pro
    $END

*ADMINISTRATION
    MISSION             : 2015-12
    AGENCY              : 'PBS, Marine Ecosystems and Aquaculture Division,'
        CONTINUED       : ' Nanaimo, B.C.'
    COUNTRY             : Canada
    PROJECT             : La Perouse Acoustic Trawl Survey
    SCIENTIST           : Boldt J.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : WCVI
    EVENT NUMBER        : 55
    LATITUDE            :  48  24.64000 N  ! (deg min)
    LONGITUDE           : 125  25.66000 W  ! (deg min)
    WATER DEPTH         : 132

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0550

    $TABLE: SENSORS
    !   Name                           Abs Depth       Serial No
    !   -----------------------------  --------------  ----------
        Temperature                    ' '             2374
        Conductivity                   ' '             2128
        'Pressure:Digiquartz with TC'  ' '             0550
        Temperature:2                  ' '             2710
        Conductivity:2                 ' '             3184
        'Oxygen:SBE 43'                ' '             1176
        Fluorometer:Seapoint           ' '             3641
        pH                             ' '             0851
    $END
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21D
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.4.1  2015/08/05 13:26:25     50053     50053
        CLEAN    5.2.1  2015/08/05 13:27:35     50053     50053
        SHIFTDAT 3.4    2015/12/24 10:12:05     50053     50053
        SHIFTDAT 3.4    2015/12/24 10:13:50     50053     50053
        SHIFTDAT 3.4    2015/12/24 10:20:58     50053     50053
        DELETE   6.3    2016/01/05 11:05:46     50053      1998
        CTDEDIT  5.0.4  2016/01/05 11:18:19      1998      1774
        FILTERS  4.3    2016/01/05 14:27:48      1774      1774
        BINAVE   4.2    2016/01/05 14:28:08      1774        31
        REMOVECH 8.2    2016/01/05 15:02:53        31        31
        CHGUNITS 3.1    2016/01/05 15:03:38        31        31
        REORDER  1.3.1  2016/01/05 15:14:10 ?         ?
        HDREDIT2 3.0.2  2016/01/05 15:14:14 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2015/08/05 13:26:07 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -1.00
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Secondary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.70
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 50.00
        -The following DELETE parameters were used:
         Surface Record Removal: Off
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    24.25 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT  v5.0.4   2016/01/05 11:18:19
            224 records were deleted in this editing session.
              7 changes in channel Salinity:T1:C1
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Bin value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2016/01/05 15:02:53
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Primary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Status:Pump
          Salinity:T0:C0 [PSS-78]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Secondary
         Salinity    reference channel: Salinity:T1:C1
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2016/01/05 15:14:14
         Applied edit header: P:\Cruise_Data_Processing\2015-12\Processing\doc\2015-12-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F11.2 ==> F7.1
         Channel  5: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  7: pH:SBE:Nominal [n/a]
           Name:   pH:SBE ==> pH:SBE:Nominal
           Units:  pH Units ==> n/a
         Channel  2: Temperature:Secondary [deg C (ITS90)]
           Format: F8.3 ==> F9.4
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\CTD Data\2015-12\2015-12_55.hex
      Software Version Seasave V 7.21d
      Temperature SN = 2374
      Conductivity SN = 2128
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Aug 02 2015 23:22:23
      NMEA Latitude = 48 24.64 N
      NMEA Longitude = 125 25.66 W
      NMEA UTC (Time) = Aug 02 2015  23:17:30
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      Latitude/Longitude added to scan
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ship: W.E. Ricker 2015-12 2015-12
       Station: 55
       Operator: sr
       Depth: 132
      System UTC = Aug 02 2015 23:22:23
    # nquan = 15
    # nvalues = 50053
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = flSP: Fluorescence, Seapoint
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = ph: pH
    # name 9 = dz/dtM: Descent Rate [m/s]
    # name 10 = pumps: Pump Status
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sal11: Salinity, Practical, 2 [PSU]
    # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 0.5
    # name 14 = flag: flag
    # span 0 =          1,      50053
    # span 1 =      0.119,     34.252
    # span 2 =     8.5310,    15.5740
    # span 3 =     8.5362,    15.5735
    # span 4 =   0.348920,   4.054995
    # span 5 =   0.245715,   4.055074
    # span 6 = 0.0000e+00, 2.2564e+01
    # span 7 =     1.2259,     2.3053
    # span 8 =      7.932,      8.506
    # span 9 =     -1.367,      0.698
    # span 10 =          0,          1
    # span 11 =     2.4276,    33.1440
    # span 12 =     1.6763,    33.1436
    # span 13 =     2.9425,     6.8130
    # span 14 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Aug 02 2015 23:17:30 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2374</SerialNumber>
    #       <CalibrationDate>17-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.34927854e-003</G>
    #       <H>6.45865277e-004</H>
    #       <I>2.35655740e-005</I>
    #       <J>2.23758399e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2128</SerialNumber>
    #       <CalibrationDate>10-Mar-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01974862e+001</G>
    #         <H>1.46230873e+000</H>
    #         <I>-2.77674094e-003</I>
    #         <J>2.84446644e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0550</SerialNumber>
    #       <CalibrationDate>17-Dec-14</CalibrationDate>
    #       <C1>-4.232943e+004</C1>
    #       <C2>1.065076e-001</C2>
    #       <C3>1.464900e-002</C3>
    #       <D1>3.694200e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.041883e+001</T1>
    #       <T2>-3.536199e-004</T2>
    #       <T3>4.388420e-006</T3>
    #       <T4>2.583800e-009</T4>
    #       <Slope>1.00002764</Slope>
    #       <Offset>0.67335</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.286170e-002</AD590M>
    #       <AD590B>-9.445820e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2710</SerialNumber>
    #       <CalibrationDate>23-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.36727112e-003</G>
    #       <H>6.46872939e-004</H>
    #       <I>2.36179186e-005</I>
    #       <J>2.24910319e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3184</SerialNumber>
    #       <CalibrationDate>19-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.02279731e+001</G>
    #         <H>1.43150354e+000</H>
    #         <I>-5.07842191e-004</I>
    #         <J>1.10933627e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1176</SerialNumber>
    #       <CalibrationDate>23-Dec-14</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>6.5248e-001</Soc>
    #         <offset>-0.5199</offset>
    #         <A>-3.8015e-003</A>
    #         <B> 1.5322e-004</B>
    #         <C>-2.5509e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.7000</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>3641</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0851</SerialNumber>
    #       <CalibrationDate>Sept 4th 2014</CalibrationDate>
    #       <Slope>4.6134</Slope>
    #       <Offset>2.5497</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, Free -->
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 05 2015 12:23:39, 7.23.2 [datcnv_vars = 11]
    # datcnv_in = P:\Cruise_Data_Processing\2015-12\RAW\CTD\2015-12-0055.hex P:\Crui
    se_Data_Processing\2015-12\Processing\doc\2015-12-ctd.XMLCON
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Aug 05 2015 12:24:50, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2015-12\Processing\convert\2015-12-005
    5.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Aug 05 2015 13:17:16, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2015-12\Processing\wildedit\2015-12-00
    55.cnv
    # alignctd_adv = sbeox0V 5.000
    # celltm_date = Aug 05 2015 13:18:12, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2015-12\Processing\align\2015-12-0055.cn
    v
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Aug 05 2015 13:19:44, 7.23.2 [derive_vars = 3]
    # Derive_in = P:\Cruise_Data_Processing\2015-12\Processing\celltm\2015-12-0055.c
    nv P:\Cruise_Data_Processing\2015-12\Processing\doc\2015-12-ctd.XMLCON
    # derive_time_window_docdt = seconds: 0.5
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    CTDEDIT was used to remove some records corrupted by shed wakes and to
     clean salinity.
    ---------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    Fluorescence and pH data are nominal and unedited except that some
        records were removed in editing temperature and salinity.

    There was no calibration sampling and no record of the sensors being used
       during previous cruises. No recalibration was applied.

    WARNING: The pH:SBE:Nominal data should be used with caution; no field
      calibration data were available.  Calibration is required  for each cast
      to get absolute values, although general trends within a cast are likely real.

    For details on the processing see the report: 2015-12_Processing_Report.doc.

    ---------------------------------------------------------------------------------
!--1--- ---2---- ---3--- ---4---- --5--- --6-- ---7--- -8--
!Pressu Temperat Fluores Salinity Oxygen Oxyge pH:SBE: Numb
!re     ure:     cence:  :T1:C1   :      n:    Nominal er_o
!       Secondar URU:             Dissol Disso         ~bin
!       y        Seapoin          ved:   lved:         _rec
!                t                SBE    SBE           ords
!------ -------- ------- -------- ------ ----- ------- ----
*END OF HEADER
    4.0  15.5690   1.617  32.3712   6.45 281.1   8.501   54
    5.0  15.5730   2.000  32.3713   6.45 281.4   8.501   49
    6.0  15.5730   1.997  32.3712   6.45 281.2   8.501   51
    7.0  15.5720   1.898  32.3714   6.44 280.9   8.501   32
    8.0  15.5690   2.114  32.3711   6.44 280.8   8.501   55
    9.0  15.5640   2.269  32.3711   6.44 281.0   8.502   54
   10.0  15.5120   2.687  32.3722   6.45 281.0   8.501   40
   11.0  15.1630   2.788  32.3894   6.24 271.9   8.486   21
   12.0  14.3380   3.011  32.4267   6.09 265.4   8.441   27
   13.0  13.8910   2.513  32.4405   5.86 255.2   8.413   29
   14.0  13.8090   2.644  32.4455   5.87 255.6   8.410   54
   15.0  13.7710   2.813  32.4471   5.86 255.4   8.408   14
   16.0  13.4390   2.859  32.4601   5.78 251.9   8.397   46
   17.0  13.2670   2.912  32.4623   5.75 250.5   8.389   40
   18.0  12.8320   2.318  32.4741   5.68 247.6   8.376   52
   19.0  12.5080   2.781  32.4958   5.59 243.7   8.358   47
   20.0  12.0990   5.082  32.5296   5.58 243.1   8.342   47
   21.0  11.8740   6.776  32.5538   5.57 242.7   8.329   47
   22.0  11.7330   6.970  32.5652   5.55 241.9   8.321   45
   23.0  11.5300   7.497  32.5777   5.45 237.5   8.312    1
   24.0   9.8330   4.419  32.8244   3.93 171.1   8.088   57
   25.0   9.4130   2.066  32.9077   3.51 152.9   8.013  132
   26.0   9.3530   2.009  32.9198   3.46 150.7   8.005   94
   27.0   9.3240   1.819  32.9255   3.44 149.8   8.003   51
   28.0   9.2810   1.896  32.9349   3.42 148.9   8.000   67
   29.0   9.2430   1.776  32.9451   3.40 148.1   7.997   94
   30.0   9.2210   1.768  32.9503   3.34 145.3   7.994  109
   31.0   9.0920   1.414  32.9821   3.23 140.7   7.988  123
   32.0   8.8840   0.960  33.0374   3.08 134.2   7.976  100
   33.0   8.6600   0.582  33.1002   2.98 129.7   7.959   98
   34.0   8.5650   0.355  33.1287   2.99 130.3   7.948   36