*2016/01/05 15:14:14.34
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2015/08/02 22:23:08.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 31
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 761B3BB3
    NUMBER OF CHANNELS  : 8

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Pressure                    decibar         4              40
       2 Temperature:Secondary       'deg C (ITS90)' 8.4096         15.5547
       3 Fluorescence:URU:Seapoint   mg/m^3          0.279          10.504
       4 Salinity:T1:C1              PSS-78          32.3699        33.1775
       5 Oxygen:Dissolved:SBE        mL/L            2.866          6.453
       6 Oxygen:Dissolved:SBE        umol/kg         124.7306       281.3763
       7 pH:SBE:Nominal              n/a             7.918          8.496
       8 Number_of_bin_records       n/a             7              148
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        8  F       ' '     3
       4  -99   ' '        9  F       ' '     4
       5  -99   ' '        7  F       ' '     2
       6  -99   ' '        6  F       ' '     1
       7  -99   ' '        8  F       ' '     3
       8  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2015-12\Pro
    $END

*ADMINISTRATION
    MISSION             : 2015-12
    AGENCY              : 'PBS, Marine Ecosystems and Aquaculture Division,'
        CONTINUED       : ' Nanaimo, B.C.'
    COUNTRY             : Canada
    PROJECT             : La Perouse Acoustic Trawl Survey
    SCIENTIST           : Boldt J.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : WCVI
    EVENT NUMBER        : 54
    LATITUDE            :  48  24.91000 N  ! (deg min)
    LONGITUDE           : 125  25.29000 W  ! (deg min)
    WATER DEPTH         : 141

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0550

    $TABLE: SENSORS
    !   Name                           Abs Depth       Serial No
    !   -----------------------------  --------------  ----------
        Temperature                    ' '             2374
        Conductivity                   ' '             2128
        'Pressure:Digiquartz with TC'  ' '             0550
        Temperature:2                  ' '             2710
        Conductivity:2                 ' '             3184
        'Oxygen:SBE 43'                ' '             1176
        Fluorometer:Seapoint           ' '             3641
        pH                             ' '             0851
    $END
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21D
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.4.1  2015/08/05 13:26:07     67298     67298
        CLEAN    5.2.1  2015/08/05 13:27:19     67298     67298
        SHIFTDAT 3.4    2015/12/24 10:11:50     67298     67298
        SHIFTDAT 3.4    2015/12/24 10:13:33     67298     67298
        SHIFTDAT 3.4    2015/12/24 10:20:42     67298     67298
        DELETE   6.3    2015/12/24 10:26:33     67298      2172
        CTDEDIT  5.0.4  2016/01/05 10:19:37      2172      1892
        FILTERS  4.3    2016/01/05 14:27:47      1892      1892
        BINAVE   4.2    2016/01/05 14:28:08      1892        31
        REMOVECH 8.2    2016/01/05 15:02:53        31        31
        CHGUNITS 3.1    2016/01/05 15:03:38        31        31
        REORDER  1.3.1  2016/01/05 15:14:10 ?         ?
        HDREDIT2 3.0.2  2016/01/05 15:14:14 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2015/08/05 13:26:07 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -1.00
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Secondary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.70
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 50.00
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    30.48 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT  v5.0.4   2016/01/05 10:19:37
            280 records were deleted in this editing session.
             31 changes in channel Salinity:T1:C1
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:URU:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Bin value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2016/01/05 15:02:53
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Primary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Status:Pump
          Salinity:T0:C0 [PSS-78]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Secondary
         Salinity    reference channel: Salinity:T1:C1
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2016/01/05 15:14:14
         Applied edit header: P:\Cruise_Data_Processing\2015-12\Processing\doc\2015-12-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F11.2 ==> F7.1
         Channel  5: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  7: pH:SBE:Nominal [n/a]
           Name:   pH:SBE ==> pH:SBE:Nominal
           Units:  pH Units ==> n/a
         Channel  2: Temperature:Secondary [deg C (ITS90)]
           Format: F8.3 ==> F9.4
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\CTD Data\2015-12\2015-12_54.hex
      Software Version Seasave V 7.21d
      Temperature SN = 2374
      Conductivity SN = 2128
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Aug 02 2015 22:24:10
      NMEA Latitude = 48 24.91 N
      NMEA Longitude = 125 25.29 W
      NMEA UTC (Time) = Aug 02 2015  22:23:08
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      Latitude/Longitude added to scan
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ship: W.E. Ricker 2015-12 2015-12
       Station:
       Operator: sr
       Depth: 141
       gopro camera test only
      System UTC = Aug 02 2015 22:24:10
    # nquan = 15
    # nvalues = 67298
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = flSP: Fluorescence, Seapoint
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = ph: pH
    # name 9 = dz/dtM: Descent Rate [m/s]
    # name 10 = pumps: Pump Status
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sal11: Salinity, Practical, 2 [PSU]
    # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 0.5
    # name 14 = flag: flag
    # span 0 =          1,      67298
    # span 1 =     -0.864,     40.476
    # span 2 =     8.0480,    15.5955
    # span 3 =     8.1416,    15.5971
    # span 4 =   0.294747,   4.060139
    # span 5 =   0.209840,   4.057908
    # span 6 = 0.0000e+00, 1.6972e+01
    # span 7 =     1.1612,     2.3077
    # span 8 =      7.890,      8.497
    # span 9 =     -0.657,      0.695
    # span 10 =          0,          1
    # span 11 =     1.9132,    33.3035
    # span 12 =     1.3568,    33.2698
    # span 13 =     2.6762,     6.6491
    # span 14 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Aug 02 2015 22:23:08 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2374</SerialNumber>
    #       <CalibrationDate>17-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.34927854e-003</G>
    #       <H>6.45865277e-004</H>
    #       <I>2.35655740e-005</I>
    #       <J>2.23758399e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2128</SerialNumber>
    #       <CalibrationDate>10-Mar-15</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01974862e+001</G>
    #         <H>1.46230873e+000</H>
    #         <I>-2.77674094e-003</I>
    #         <J>2.84446644e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0550</SerialNumber>
    #       <CalibrationDate>17-Dec-14</CalibrationDate>
    #       <C1>-4.232943e+004</C1>
    #       <C2>1.065076e-001</C2>
    #       <C3>1.464900e-002</C3>
    #       <D1>3.694200e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.041883e+001</T1>
    #       <T2>-3.536199e-004</T2>
    #       <T3>4.388420e-006</T3>
    #       <T4>2.583800e-009</T4>
    #       <Slope>1.00002764</Slope>
    #       <Offset>0.67335</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.286170e-002</AD590M>
    #       <AD590B>-9.445820e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2710</SerialNumber>
    #       <CalibrationDate>23-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.36727112e-003</G>
    #       <H>6.46872939e-004</H>
    #       <I>2.36179186e-005</I>
    #       <J>2.24910319e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3184</SerialNumber>
    #       <CalibrationDate>19-Dec-14</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.02279731e+001</G>
    #         <H>1.43150354e+000</H>
    #         <I>-5.07842191e-004</I>
    #         <J>1.10933627e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1176</SerialNumber>
    #       <CalibrationDate>23-Dec-14</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>6.5248e-001</Soc>
    #         <offset>-0.5199</offset>
    #         <A>-3.8015e-003</A>
    #         <B> 1.5322e-004</B>
    #         <C>-2.5509e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.7000</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>3641</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0851</SerialNumber>
    #       <CalibrationDate>Sept 4th 2014</CalibrationDate>
    #       <Slope>4.6134</Slope>
    #       <Offset>2.5497</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, Free -->
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 05 2015 12:23:34, 7.23.2 [datcnv_vars = 11]
    # datcnv_in = P:\Cruise_Data_Processing\2015-12\RAW\CTD\2015-12-0054.hex P:\Crui
    se_Data_Processing\2015-12\Processing\doc\2015-12-ctd.XMLCON
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Aug 05 2015 12:24:46, 7.23.2
    # wildedit_in = P:\Cruise_Data_Processing\2015-12\Processing\convert\2015-12-005
    4.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Aug 05 2015 13:17:12, 7.23.2
    # alignctd_in = P:\Cruise_Data_Processing\2015-12\Processing\wildedit\2015-12-00
    54.cnv
    # alignctd_adv = sbeox0V 5.000
    # celltm_date = Aug 05 2015 13:18:08, 7.23.2
    # celltm_in = P:\Cruise_Data_Processing\2015-12\Processing\align\2015-12-0054.cn
    v
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Aug 05 2015 13:19:39, 7.23.2 [derive_vars = 3]
    # Derive_in = P:\Cruise_Data_Processing\2015-12\Processing\celltm\2015-12-0054.c
    nv P:\Cruise_Data_Processing\2015-12\Processing\doc\2015-12-ctd.XMLCON
    # derive_time_window_docdt = seconds: 0.5
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    Remarks from CTDEDIT:
    There were stops during the downcast so the quality of this profile is
     lower than usual.
    CTDEDIT was used to remove some records corrupted by shed wakes and to
     clean salinity.
    ---------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    Fluorescence and pH data are nominal and unedited except that some
        records were removed in editing temperature and salinity.

    There was no calibration sampling and no record of the sensors being used
       during previous cruises. No recalibration was applied.

    WARNING: The pH:SBE:Nominal data should be used with caution; no field
      calibration data were available.  Calibration is required  for each cast
      to get absolute values, although general trends within a cast are likely real.

    For details on the processing see the report: 2015-12_Processing_Report.doc.

    ---------------------------------------------------------------------------------
!--1--- ---2---- ---3--- ---4---- --5--- --6-- ---7--- -8--
!Pressu Temperat Fluores Salinity Oxygen Oxyge pH:SBE: Numb
!re     ure:     cence:  :T1:C1   :      n:    Nominal er_o
!       Secondar URU:             Dissol Disso         ~bin
!       y        Seapoin          ved:   lved:         _rec
!                t                SBE    SBE           ords
!------ -------- ------- -------- ------ ----- ------- ----
*END OF HEADER
    4.0  15.5470   1.460  32.3699   6.45 281.3   8.476   37
    5.0  15.5530   1.520  32.3702   6.45 281.4   8.485  109
    6.0  15.5530   1.702  32.3704   6.44 280.8   8.488  148
    7.0  15.5550   1.645  32.3707   6.45 281.2   8.490  102
    8.0  15.5480   1.770  32.3707   6.36 277.2   8.491  125
    9.0  15.2350   2.384  32.3827   6.07 264.8   8.496   51
   11.0  13.6180   3.494  32.4693   5.79 252.5   8.404    7
   12.0  13.2420   3.684  32.4830   5.80 252.9   8.399   26
   13.0  12.8550   4.239  32.5018   5.76 251.0   8.377   51
   14.0  12.6230   5.198  32.5204   5.77 251.3   8.365   45
   15.0  12.5950   5.420  32.5242   5.76 251.1   8.361   41
   16.0  12.5810   5.669  32.5258   5.75 250.6   8.359   36
   17.0  12.5460   5.878  32.5291   5.72 249.5   8.358   26
   21.0  12.8420   5.083  32.5067   5.71 248.8   8.367   23
   22.0  12.6730   5.242  32.5152   5.68 247.4   8.363   41
   24.0  12.1260   6.865  32.5561   5.49 239.4   8.338   57
   26.0  11.5230   9.167  32.6143   4.96 216.1   8.310   19
   27.0  11.0480  10.504  32.6569   4.83 210.2   8.271   36
   28.0   9.9100  10.260  32.7937   4.00 174.1   8.163   23
   29.0   9.6480   4.025  32.8472   3.83 166.8   8.087   49
   30.0   9.6690   3.459  32.8536   3.75 163.4   8.043   21
   31.0   9.5610   2.633  32.8741   3.65 158.8   8.024  103
   32.0   9.4550   2.276  32.8964   3.56 155.2   8.014   68
   33.0   9.4320   2.409  32.9007   3.53 153.8   8.014   81
   34.0   9.2900   2.277  32.9329   3.37 146.8   8.011   98
   35.0   8.9100   1.144  33.0289   3.16 137.7   7.987   78
   36.0   8.6200   0.559  33.1120   3.00 130.4   7.957   48
   37.0   8.5080   0.356  33.1453   2.93 127.5   7.938  109
   38.0   8.4680   0.284  33.1583   2.90 126.0   7.928   58
   39.0   8.4440   0.284  33.1665   2.89 125.7   7.924   61
   40.0   8.4100   0.279  33.1775   2.87 124.7   7.918  101