*2015/03/02 14:42:49.59 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2014/06/11 16:09:33.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 63 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 5431A0F2 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.014 63.01489 2 Temperature:Primary 'deg C (ITS90)' 8.6533 15.47477 3 Salinity:T0:C0 PSS-78 23.77655 30.13981 4 Number_of_bin_records n/a 1 9 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2014-99\der $END *ADMINISTRATION MISSION : 2014-99 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : CFMETR SCIENTIST : Chandler P. PLATFORM : Stikine *LOCATION GEOGRAPHIC AREA : Strait of Georgia STATION : Nanoose EVENT NUMBER : 611 LATITUDE : 49 19.78000 N ! (deg min) LONGITUDE : 124 4.86000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------------- -------------- ---------- Temperature ' ' 1449 Conductivity ' ' 1449 Altimeter ' ' 1094 'Pressure:Strain Gauge' ' ' 1449 $END $REMARKS SOFTWARE VERSION SEASAVE V 7.18C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.4.1 2015/02/26 17:09:32 368 368 MERGEHDR 1.3 2015/02/26 17:09:42 368 368 ADTIMCH 4.4 2015/02/26 17:09:51 368 368 CLIP 1.3 2015/02/26 17:10:06 368 249 DELETE 6.3 2015/02/26 17:10:22 249 144 BINAVE 4.2 2015/03/02 13:06:54 144 63 REMOVECH 8.2 2015/03/02 14:03:13 63 63 HDREDIT2 3.0.2 2015/03/02 14:42:49 ? ? $END $REMARKS -The following ADTIMCH parameters were used. Add 8.00 hours to times in header file section -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Scan_Number Min,Max = 120.000, 1000000.000 Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 53.18 dbars Sample interval (from FILE section of header) = 0.500 seconds. -The following BINAVE parameters were used: Bin channel = Pressure:StrainGauge Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2015/03/02 14:03:13 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Altimeter [metres] Flag -HEADER EDITS: 2015/03/02 14:42:49 Applied edit header: P:\Cruise_Data_Processing\2014-99\Processing\DOC\2014-99-hdr.txt Channel 1: Pressure [decibar] Name: Pressure:StrainGauge ==> Pressure Format: F10.3 ==> F7.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = C:\CTDCPDW5\n14061101.hex Software Version Seasave V 7.18c Temperature SN = 1449 Conductivity SN = 1449 System UpLoad Time = Jun 11 2014 08:09:33 Craft: stikine Range: nanoose Operator: mm # nquan = 8 # nvalues = 368 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = altM: Altimeter [m] # name 6 = sal00: Salinity, Practical [PSU] # name 7 = flag: flag # span 0 = 1, 368 # span 1 = 0.831, 63.182 # span 2 = 8.6499, 15.4781 # span 3 = 3.062292, 3.296392 # span 4 = -1.337, 1.336 # span 5 = 45.25, 47.29 # span 6 = 23.7708, 30.1431 # span 7 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jun 11 2014 08:09:33 [System UpLoad Time] # bad_flag = -9.990e-29 # # # # # 1449 # 13-Aug-13 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.21208862e-003 # 5.96133278e-004 # 4.66628839e-006 # -1.60340879e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 1449 # 13-Aug-13 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -3.92912877e+000 # 4.68011022e-001 # 1.48658761e-003 # -4.46751125e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 1094 # # 30.000 # 0.000 # # # # # # # # # 1449 # 31-Jul-13 # 7.423115e+002 # -1.956117e-001 # 2.603947e-007 # 0.00000 # # # # datcnv_date = Feb 25 2015 17:22:04, 7.22.5 [datcnv_vars = 6] # datcnv_in = P:\Cruise_Data_Processing\2014-99\raw\n14061101.hex P:\Cruise_Data _Processing\2014-99\raw\n14061101.CON # datcnv_skipover = 0 # filter_date = Feb 26 2015 16:42:27, 7.22.5 # filter_in = P:\Cruise_Data_Processing\2014-99\convert\n14061101.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 0.200 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Feb 26 2015 17:07:55, 7.22.5 # alignctd_in = P:\Cruise_Data_Processing\2014-99\filter\n14061101.cnv # alignctd_adv = t090C 0.730 # Derive_date = Feb 26 2015 17:08:23, 7.22.5 [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2014-99\align\n14061101.cnv P:\Cruise_Da ta_Processing\2014-99\raw\N14011501.CON # file_type = ascii END* ---------------------------------------------------------------------- SeaCat salinity is prone to error due to a mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. Such errors are likely to be larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05 units in areas of high gradients, but on the order of 0.005 where gradients are low and descent rate steady. There were no salinity calibration data available for this cruise. There was no position information available so the latitude and longitude were taken from file n14061001. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.0 15.4748 23.7766 6 2.0 15.4653 23.8216 2 3.0 15.3848 24.0265 2 4.0 15.0054 24.5771 2 5.0 14.1814 25.6052 2 6.0 13.7460 26.6098 2 7.0 13.6446 27.0263 1 8.0 12.5927 27.4496 3 9.0 11.7306 27.8907 2 10.0 11.1953 28.3125 2 11.0 10.8752 28.6633 2 12.0 10.5442 28.8833 2 13.0 10.4097 28.9509 1 14.0 10.3376 28.9918 3 15.0 10.2377 29.0540 2 16.0 10.1641 29.1033 2 17.0 10.0678 29.1644 2 18.0 10.0252 29.1945 2 19.0 10.0168 29.1994 2 20.0 10.0031 29.2058 2 21.0 9.9307 29.2477 2 22.0 9.8111 29.3054 2 23.0 9.5959 29.4176 2 24.0 9.4652 29.5596 2 25.0 9.5426 29.6362 3 26.0 9.5767 29.6577 2 27.0 9.5898 29.6622 2 28.0 9.5688 29.6789 2 29.0 9.4933 29.7055 2 30.0 9.3361 29.7609 2 31.0 9.2489 29.7820 3 32.0 9.2259 29.7794 2 33.0 9.2122 29.7768 2 34.0 9.1975 29.7769 2 35.0 9.1720 29.7723 2 36.0 9.1255 29.7658 2 37.0 9.0420 29.7720 3 38.0 8.9729 29.7822 2 39.0 8.9553 29.7868 2 40.0 8.9440 29.7879 2 41.0 8.9110 29.7975 2 42.0 8.8434 29.8299 3 43.0 8.8312 29.8418 2 44.0 8.8272 29.8540 2 45.0 8.8148 29.8701 2 46.0 8.8007 29.8822 2 47.0 8.7877 29.8975 2 48.0 8.7622 29.9250 2 49.0 8.7357 29.9513 2 50.0 8.7150 29.9684 2 51.0 8.6786 29.9832 3 52.0 8.6533 30.0202 2 53.0 8.6897 30.0495 3 54.0 8.7107 30.0717 2 55.0 8.7313 30.0867 2 56.0 8.7420 30.0961 2 57.0 8.7456 30.1021 2 58.0 8.7549 30.1145 2 59.0 8.7931 30.1241 2 60.0 8.8085 30.1285 2 61.0 8.8147 30.1318 2 62.0 8.8294 30.1349 3 63.0 8.8392 30.1398 9