*2015/03/02 14:42:47.83 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2014/02/25 16:55:16.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 45 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 7D7B1003 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 0.9479231 45.75467 2 Temperature:Primary 'deg C (ITS90)' 6.351023 7.403383 3 Salinity:T0:C0 PSS-78 29.33848 29.94713 4 Number_of_bin_records n/a 1 13 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2014-99\der $END *ADMINISTRATION MISSION : 2014-99 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : CFMETR SCIENTIST : Chandler P. PLATFORM : Stikine *LOCATION GEOGRAPHIC AREA : Strait of Georgia STATION : Nanoose EVENT NUMBER : 225 LATITUDE : 49 19.78000 N ! (deg min) LONGITUDE : 124 4.86000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------------- -------------- ---------- Temperature ' ' 1451 Conductivity ' ' 1451 Altimeter ' ' 945 'Pressure:Strain Gauge' ' ' 1451 $END $REMARKS SOFTWARE VERSION SEASAVE V 7.18C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.4.1 2015/02/26 17:09:28 438 438 MERGEHDR 1.3 2015/02/26 17:09:40 438 438 ADTIMCH 4.4 2015/02/26 17:09:48 438 438 CLIP 1.3 2015/02/26 17:10:03 438 319 DELETE 6.3 2015/02/26 17:10:20 319 162 BINAVE 4.2 2015/03/02 13:06:50 162 45 REMOVECH 8.2 2015/03/02 14:03:11 45 45 HDREDIT2 3.0.2 2015/03/02 14:42:47 ? ? $END $REMARKS -The following ADTIMCH parameters were used. Add 8.00 hours to times in header file section -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Scan_Number Min,Max = 120.000, 1000000.000 Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 35.88 dbars Sample interval (from FILE section of header) = 0.500 seconds. -The following BINAVE parameters were used: Bin channel = Pressure:StrainGauge Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2015/03/02 14:03:11 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Altimeter [metres] Flag -HEADER EDITS: 2015/03/02 14:42:47 Applied edit header: P:\Cruise_Data_Processing\2014-99\Processing\DOC\2014-99-hdr.txt Channel 1: Pressure [decibar] Name: Pressure:StrainGauge ==> Pressure Format: F10.3 ==> F7.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = C:\CTDCPDW5\n14022501.hex Software Version Seasave V 7.18c Temperature SN = 1451 Conductivity SN = 1451 System UpLoad Time = Feb 25 2014 08:55:16 Craft: STIKINE Range: NANOOSE Operator: # nquan = 8 # nvalues = 438 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = altM: Altimeter [m] # name 6 = sal00: Salinity, Practical [PSU] # name 7 = flag: flag # span 0 = 1, 438 # span 1 = 0.612, 45.875 # span 2 = 6.3350, 7.4068 # span 3 = 2.956041, 3.100258 # span 4 = -0.804, 3.480 # span 5 = 72.84, 94.97 # span 6 = 29.3279, 29.9494 # span 7 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Feb 25 2014 08:55:16 [System UpLoad Time] # bad_flag = -9.990e-29 # # # # # 1451 # 01-Sep-12 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.23216249e-003 # 5.98842730e-004 # 6.04767795e-006 # -1.39336001e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 1451 # 01-Sep-12 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -4.16665218e+000 # 4.96889502e-001 # 1.37272276e-003 # -3.67562248e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 945 # # 15.000 # 0.000 # # # # # # # # # 1451 # 06-Sep-12 # 7.467418e+002 # -1.962710e-001 # 2.908151e-007 # 0.00000 # # # # datcnv_date = Feb 25 2015 17:21:50, 7.22.5 [datcnv_vars = 6] # datcnv_in = P:\Cruise_Data_Processing\2014-99\raw\n14022501.hex P:\Cruise_Data _Processing\2014-99\raw\n14022501.CON # datcnv_skipover = 0 # filter_date = Feb 26 2015 16:42:26, 7.22.5 # filter_in = P:\Cruise_Data_Processing\2014-99\convert\n14022501.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 0.200 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Feb 26 2015 17:07:54, 7.22.5 # alignctd_in = P:\Cruise_Data_Processing\2014-99\filter\n14022501.cnv # alignctd_adv = t090C 0.730 # Derive_date = Feb 26 2015 17:08:22, 7.22.5 [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2014-99\align\n14022501.cnv P:\Cruise_Da ta_Processing\2014-99\raw\N14011501.CON # file_type = ascii END* ---------------------------------------------------------------------- SeaCat salinity is prone to error due to a mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. Such errors are likely to be larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05 units in areas of high gradients, but on the order of 0.005 where gradients are low and descent rate steady. There were no salinity calibration data available for this cruise. There was no position information available so the latitude and longitude were taken from file n14022502. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.0 6.3510 29.3385 13 2.0 6.4620 29.3712 3 3.0 6.4920 29.3970 2 4.0 6.5196 29.4075 1 5.0 6.5508 29.4219 1 6.0 6.6404 29.4260 2 7.0 6.7071 29.4360 1 8.0 6.7258 29.4533 1 9.0 6.7950 29.4812 2 10.0 6.8878 29.5402 2 11.0 6.9196 29.5725 1 12.0 6.9230 29.5929 2 13.0 6.9269 29.6031 2 14.0 6.9402 29.6080 1 15.0 6.9502 29.6187 2 16.0 6.9815 29.6406 2 17.0 7.0406 29.6651 2 18.0 7.0873 29.6824 2 19.0 7.1142 29.6973 2 20.0 7.1277 29.7062 1 21.0 7.1361 29.7170 2 22.0 7.1384 29.7307 2 23.0 7.1445 29.7393 1 24.0 7.1589 29.7500 2 25.0 7.1661 29.7599 1 26.0 7.1698 29.7682 2 27.0 7.1795 29.7792 3 28.0 7.1804 29.7860 5 30.0 7.2193 29.8274 4 31.0 7.2186 29.8276 2 32.0 7.2316 29.8418 8 33.0 7.2350 29.8465 6 34.0 7.2465 29.8581 8 35.0 7.2724 29.8774 6 36.0 7.2838 29.8834 6 37.0 7.2862 29.8847 6 38.0 7.2871 29.8862 7 39.0 7.2895 29.8895 5 40.0 7.3070 29.9031 7 41.0 7.3208 29.9097 5 42.0 7.3257 29.9122 6 43.0 7.3360 29.9191 5 44.0 7.3519 29.9278 6 45.0 7.3987 29.9464 6 46.0 7.4034 29.9471 6