*2015/04/17 14:38:24.05
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2014/08/10 12:03:18.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 79
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 84F0D068
    NUMBER OF CHANNELS  : 4

    $TABLE: CHANNELS
    ! No Name                       Units     Minimum        Maximum
    !--- -------------------------- --------- -------------- --------------
       1 Pressure                   decibar   3              81
       2 Fluorescence:URU:Wetlabs   mg/m^3    0.122          35.075
       3 pH:SBE:Nominal             n/a       8.521          9.343
       4 Number_of_bin_records      n/a       8              41
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        8  F       ' '     3
       3  -99   ' '        8  F       ' '     3
       4  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2014-51\Pro
    $END

*ADMINISTRATION
    MISSION             : 2014-51
    AGENCY              : 'PBS, Marine Ecosystems and Aquaculture Division,'
        CONTINUED       : ' Nanaimo, B.C.'
    COUNTRY             : Canada
    PROJECT             : NIght Pelagic Ecosystem Survey
    SCIENTIST           : Flostrand L.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : WCVI
    STATION             : 17
    EVENT NUMBER        : 17
    LATITUDE            :  49  46.98000 N  ! (deg min)
    LONGITUDE           : 127  23.71000 W  ! (deg min)
    WATER DEPTH         : 83

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0550

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             2710
        Conductivity                       ' '             2128
        'Pressure:Digiquartz with TC'      ' '             0550
        Temperature:2                      ' '             2374
        Conductivity:2                     ' '             3396
        'Oxygen:SBE 43'                    ' '             1176
        'Fluorometer:WET Labs ECO-AFL/FL'  ' '             2215
        pH                                 ' '             0852
    $END
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.22.4
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.4.1  2015/04/16 11:49:19      4697      4697
        CLEAN    5.2.1  2015/04/16 11:55:39      4697      4697
        SHIFTDAT 3.4    2015/04/16 13:07:37      4697      4697
        SHIFTDAT 3.4    2015/04/16 13:08:24      4697      4697
        SHIFTDAT 3.4    2015/04/16 13:23:26      4697      4697
        SHIFTDAT 3.4    2015/04/16 13:28:19      4697      4697
        DELETE   6.3    2015/04/16 13:30:37      4697      2046
        CALIB    11.8.1 2015/04/17 14:23:44      2046      2046
        BINAVE   4.2    2015/04/17 14:26:25      2046        79
        REMOVECH 8.2    2015/04/17 14:28:37        79        79
        CHGUNITS 3.1    2015/04/17 14:29:48        79        79
        REORDER  1.3.1  2015/04/17 14:29:58 ?         ?
        HDREDIT2 3.0.2  2015/04/17 14:38:24 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2015/04/16 11:55:12 20
         Reset #RECS, MIN & MAX values in header.
         Interpolation by   Record Number, in Pressure
         Insert Pad Values in Channel: Fluorescence:URU:Wetlabs:ECO-AFL [mg/m^3]
           where channel Fluorescence:URU:Wetlabs:ECO-AFL [mg/m^3] is in the range -1000
                3 data records in pad range.
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:URU:Wetlabs:ECO-AFL [mg/m^3
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 12.00
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE [pH Units]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 55.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary [S/m]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.70
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Secondary [S/m]
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -1.30
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    71.53 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CALIB parameters: 2015/04/17 14:23:44
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2014-51\Processing\doc\2014-51-recal1.CCF
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         12 Salinity:T0:C0                PSS-78     10  0.1000000E-02  0.1000000E+01
         14 Oxygen:Dissolved:SBE          mL/L       10  0.1420000E-01  0.1050200E+01
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Bin value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2015/04/17 14:28:37
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Primary [deg C (ITS90)]
          Temperature:Secondary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Status:Pump
          Salinity:T0:C0 [PSS-78]
          Salinity:T1:C1 [PSS-78]
          Oxygen:Dissolved:SBE [mL/L]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary
         Salinity    reference channel: Salinity:T0:C0
        - No units changed
        -HEADER EDITS: 2015/04/17 14:38:24
         Applied edit header: P:\Cruise_Data_Processing\2014-51\Processing\doc\2014-51-HDR.TXT
         Channel  1: Pressure [decibar]
           Format: F10.3 ==> F7.1
         Channel  3: pH:SBE:Nominal [n/a]
           Name:   pH:SBE ==> pH:SBE:Nominal
           Units:  pH Units ==> n/a
         Channel  2: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:URU:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\Data\2014-51\2014-51-0017.hex
      Software Version Seasave V 7.22.4
      Temperature SN = 2710
      Conductivity SN = 2128
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Aug 11 2014 05:06:28
      NMEA Latitude = 49 46.98 N
      NMEA Longitude = 127 23.71 W
      NMEA UTC (Time) = Aug 10 2014  12:03:18
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 1
      pressure baud rate = 9600
      NMEA baud rate = 4800
      Latitude/Longitude added to scan
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ricker 2014-08 2014-51
       Station: 17
       Depth(m): 83
      System UTC = Aug 11 2014 04:06:28
    # nquan = 15
    # nvalues = 4697
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 8 = ph: pH
    # name 9 = dz/dtM: Descent Rate [m/s]
    # name 10 = pumps: Pump Status
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sal11: Salinity, Practical, 2 [PSU]
    # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 0.5
    # name 14 = flag: flag
    # span 0 =          1,       4697
    # span 1 =      2.830,     81.526
    # span 2 =     6.9952,    13.6369
    # span 3 =     6.9930,    13.6374
    # span 4 =   3.365344,   3.862687
    # span 5 =   3.364818,   3.861798
    # span 6 =     0.1087,    39.2833
    # span 7 =     1.0366,     2.5360
    # span 8 =      8.492,      9.350
    # span 9 =     -1.527,      1.888
    # span 10 =          0,          0
    # span 11 =    30.0625,    33.7140
    # span 12 =    30.8559,    33.6952
    # span 13 =    2.08136,    7.61683
    # span 14 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Aug 10 2014 12:03:18 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2710</SerialNumber>
    #       <CalibrationDate>31-Jan-13</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.36715380e-003</G>
    #       <H>6.46576903e-004</H>
    #       <I>2.33953737e-005</I>
    #       <J>2.19507139e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2128</SerialNumber>
    #       <CalibrationDate>29-Jan-13</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.02028018e+001</G>
    #         <H>1.46419864e+000</H>
    #         <I>-3.32636380e-003</I>
    #         <J>3.25151678e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0550</SerialNumber>
    #       <CalibrationDate>25-Mar-13</CalibrationDate>
    #       <C1>-4.232943e+004</C1>
    #       <C2>1.065076e-001</C2>
    #       <C3>1.464900e-002</C3>
    #       <D1>3.694200e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.041883e+001</T1>
    #       <T2>-3.536199e-004</T2>
    #       <T3>4.388420e-006</T3>
    #       <T4>2.583800e-009</T4>
    #       <Slope>0.99988778</Slope>
    #       <Offset>-0.12341</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.286170e-002</AD590M>
    #       <AD590B>-9.445820e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2374</SerialNumber>
    #       <CalibrationDate>31-Jan-13</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.34913123e-003</G>
    #       <H>6.45506956e-004</H>
    #       <I>2.32986392e-005</I>
    #       <J>2.17320090e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>30-Jan-13</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.92108035e+000</G>
    #         <H>1.31524483e+000</H>
    #         <I>-2.66264865e-004</I>
    #         <J>8.33352189e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1176</SerialNumber>
    #       <CalibrationDate>05-Mar-13</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>6.2702e-001</Soc>
    #         <offset>-0.5178</offset>
    #         <A>-3.7667e-003</A>
    #         <B> 1.4548e-004</B>
    #         <C>-2.8367e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 2.2100</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>2215</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <ScaleFactor>1.30000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0185</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0852</SerialNumber>
    #       <CalibrationDate>21-apr-11</CalibrationDate>
    #       <Slope>4.6009</Slope>
    #       <Offset>2.5060</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, Free -->
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Apr 16 2015 10:33:44, 7.22.5 [datcnv_vars = 11]
    # datcnv_in = P:\Cruise_Data_Processing\2014-51\RAW\CTD\2014-51-0017.hex P:\Crui
    se_Data_Processing\2014-51\Processing\doc\2014-51-ctd2.XMLCON
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Apr 16 2015 10:34:44, 7.22.5
    # wildedit_in = P:\Cruise_Data_Processing\2014-51\Processing\convert\2014-51-001
    7.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Apr 16 2015 10:36:08, 7.22.5
    # alignctd_in = P:\Cruise_Data_Processing\2014-51\Processing\wildedit\2014-51-00
    17.cnv
    # alignctd_adv = sbeox0V 4.000
    # celltm_date = Apr 16 2015 10:36:43, 7.22.5
    # celltm_in = P:\Cruise_Data_Processing\2014-51\Processing\align\2014-51-0017.cn
    v
    # celltm_alpha = 0.0300, 0.0300
    # celltm_tau = 9.0000, 9.0000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Apr 16 2015 10:38:40, 7.22.5 [derive_vars = 3]
    # Derive_in = P:\Cruise_Data_Processing\2014-51\Processing\celltm\2014-51-0017.c
    nv P:\Cruise_Data_Processing\2014-51\Processing\doc\2014-51-ctd2.XMLCON
    # derive_time_window_docdt = seconds: 0.5
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*

    ----------------------------------------------------------------------------------
    Data Processing Notes:
    ----------------------
    Fluorescence and pH data are nominal and unedited except that some
       records were removed in editing temperature and salinity.

    WARNING: The pH:SBE:Nominal data should be used with caution; no field
      calibration data were collected.  Calibration is required for each cast to get
      absolute values, although general trends within a cast are likely real.

    The pumps were not turned on for this cast so the pumped channels were 
      removed.

    For details on the processing see the report: 2014-51_Processing_Report.doc.

    ----------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units    Fmla Pad    Coefficients
    !   ---------------------- -------- ---- ------ ------------
        Salinity:T0:C0         PSS-78     10 -99    () (0.1E-02 1)
        Oxygen:Dissolved:SBE   mL/L       10 -99    () (0.142E-01 1.0502)
    $END
!--1--- ---2--- ---3--- -4--
!Pressu Fluores pH:SBE: Numb
!re     cence:  Nominal er_o
!       URU:            ~bin
!       Wetlabs         _rec
!                       ords
!------ ------- ------- ----
*END OF HEADER
    3.0  13.551   9.311    8
    4.0  14.146   9.315   41
    5.0  13.604   9.334   28
    6.0  13.182   9.343   20
    7.0  20.368   9.329   25
    8.0  32.753   9.288   27
    9.0  35.075   9.216   31
   10.0  21.838   9.134   28
   11.0  14.822   9.069   24
   12.0   8.645   8.967   24
   13.0   4.328   8.857   23
   14.0   2.430   8.800   20
   15.0   1.846   8.770   21
   16.0   1.474   8.749   20
   17.0   1.040   8.733   26
   18.0   0.725   8.718   29
   19.0   0.548   8.699   30
   20.0   0.443   8.686   27
   21.0   0.490   8.677   26
   22.0   0.487   8.670   24
   23.0   0.455   8.662   24
   24.0   0.451   8.655   27
   25.0   0.387   8.646   28
   26.0   0.357   8.644   25
   27.0   0.352   8.650   21
   28.0   0.315   8.664   21
   29.0   0.262   8.680   20
   30.0   0.240   8.702   25
   31.0   0.196   8.733   36
   32.0   0.193   8.753   33
   33.0   0.193   8.765   27
   34.0   0.191   8.773   25
   35.0   0.203   8.777   27
   36.0   0.176   8.776   25
   37.0   0.177   8.774   19
   38.0   0.170   8.773   21
   39.0   0.163   8.770   19
   40.0   0.166   8.772   26
   41.0   0.152   8.771   37
   42.0   0.146   8.769   29
   43.0   0.150   8.770   21
   44.0   0.134   8.772   26
   45.0   0.142   8.773   35
   46.0   0.138   8.774   33
   47.0   0.145   8.774   22
   48.0   0.127   8.773   20
   49.0   0.150   8.772   17
   50.0   0.158   8.771   22
   51.0   0.144   8.769   29
   52.0   0.142   8.769   30
   53.0   0.159   8.767   28
   54.0   0.145   8.767   29
   55.0   0.141   8.765   25
   56.0   0.148   8.766   22
   57.0   0.136   8.765   24
   58.0   0.134   8.763   34
   59.0   0.136   8.761   29
   60.0   0.122   8.758   21
   61.0   0.140   8.754   19
   62.0   0.145   8.750   21
   63.0   0.148   8.745   26
   64.0   0.151   8.731   37
   65.0   0.147   8.702   31
   66.0   0.145   8.685   24
   67.0   0.153   8.672   22
   68.0   0.160   8.662   22
   69.0   0.160   8.654   27
   70.0   0.153   8.645   30
   71.0   0.157   8.630   30
   72.0   0.158   8.616   24
   73.0   0.150   8.609   22
   74.0   0.158   8.603   21
   75.0   0.154   8.596   24
   76.0   0.154   8.589   32
   77.0   0.162   8.580   35
   78.0   0.159   8.565   32
   79.0   0.169   8.548   25
   80.0   0.168   8.531   24
   81.0   0.176   8.521   23