*2015/07/30 12:59:35.11 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2013/11/05 18:42:08.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 171 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 9B4748E5 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 0.322 169.853 2 Temperature:Primary 'deg C (ITS90)' 9.0517 10.143 3 Salinity:T0:C0 PSS-78 28.6775 31.0091 4 Number_of_bin_records n/a 2 7 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I ' ' $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2013-99\Pro $END *ADMINISTRATION MISSION : 2013-99 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : CFMETR SCIENTIST : Chandler P. PLATFORM : Stikine *LOCATION GEOGRAPHIC AREA : Strait of Georgia STATION : Nanoose EVENT NUMBER : 1105 LATITUDE : 49 17.99000 N ! (deg min) LONGITUDE : 124 5.53000 W ! (deg min) ALTIMETER (M) : 4.49 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1451, 1511, 1513 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------------- -------------- ---------- Temperature ' ' 1451 Conductivity ' ' 1451 Altimeter ' ' 945 'Pressure:Strain Gauge' ' ' 1451 $END $REMARKS SOFTWARE VERSION SEASAVE V 7.18C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.4.1 2015/07/29 09:34:19 499 499 MERGEHDR 1.3 2015/07/29 09:34:28 499 499 CLIP 1.3 2015/07/29 10:20:24 499 440 DELETE 6.3 2015/07/29 10:21:44 440 440 CTDEDIT 5.0.4 2015/07/30 10:23:39 440 427 BINAVE 4.2 2015/07/30 10:51:36 427 171 ADTIMCH 4.4 2015/07/30 12:59:16 171 171 REMOVECH 8.2 2015/07/30 12:59:24 171 171 HDREDIT2 3.0.2 2015/07/30 12:59:35 ? ? $END $REMARKS -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 60,****** Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 160.60 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CTDEDIT v5.0.4 2015/07/30 10:23:39 13 records were deleted in this editing session. 15 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure* Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following ADTIMCH parameters were used. Add 8.00 hours to times in header file section Change time zone to UTC in header file section -REMOVECH 2015/07/30 12:59:24 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Altimeter [metres] Flag -HEADER EDITS: 2015/07/30 12:59:35 Applied edit header: P:\Cruise_Data_Processing\2013-99\Processing\doc\2013-99-hdr.txt Channel 1: Pressure [decibar] Name: Pressure:StrainGauge ==> Pressure Format: F10.3 ==> F7.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = C:\CTDCPDW5\n13110501.hex Software Version Seasave V 7.18c Temperature SN = 1451 Conductivity SN = 1451 System UpLoad Time = Nov 05 2013 10:42:08 Craft: SIKANNI Range: NANOOSE ---------------------------------------------------------------------- SeaCat salinity is prone to error due to a mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. Such errors are likely to be larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05 units in areas of high gradients, but on the order of 0.005 where gradients are low and descent rate steady. There were no salinity calibration data available for this cruise. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 0.3 10.0965 28.6775 4 0.9 10.0831 28.6895 7 1.9 10.0816 28.6903 4 3.0 10.0811 28.6898 4 4.1 10.0858 28.6880 3 5.0 10.0893 28.6878 2 6.0 10.0909 28.6898 3 7.1 10.0953 28.6918 2 7.9 10.0944 28.6924 2 9.0 10.0902 28.6940 3 10.0 10.0886 28.6963 2 11.0 10.0906 28.7016 3 12.1 10.0962 28.7127 3 13.1 10.1093 28.7272 3 14.1 10.1205 28.7355 3 15.1 10.1381 28.7407 3 16.0 10.1430 28.7465 2 16.9 10.1287 28.7927 3 18.0 10.0998 28.9072 4 19.1 10.0899 29.0048 3 20.1 10.0562 29.1603 3 21.1 10.0338 29.2402 4 22.0 10.0216 29.2833 4 23.0 9.9970 29.3546 5 24.0 9.9834 29.3943 4 25.0 9.9217 29.5220 4 26.0 9.8742 29.6074 4 26.9 9.8603 29.6320 4 27.9 9.8520 29.6479 4 28.9 9.8499 29.6525 2 30.0 9.8484 29.6560 3 31.1 9.8448 29.6660 2 32.0 9.8396 29.6777 2 33.0 9.8367 29.6847 2 33.9 9.8326 29.6938 2 34.8 9.8293 29.7013 2 36.0 9.8278 29.7051 3 37.2 9.8267 29.7097 2 38.2 9.8265 29.7134 2 39.1 9.8249 29.7199 2 40.0 9.8252 29.7280 2 41.0 9.8266 29.7378 2 41.9 9.8264 29.7538 2 42.9 9.8190 29.7933 2 43.8 9.8060 29.8324 2 45.0 9.7942 29.8570 3 46.2 9.7915 29.8684 2 47.1 9.7892 29.8726 2 48.1 9.7852 29.8771 2 49.0 9.7829 29.8794 2 50.0 9.7807 29.8818 2 50.9 9.7795 29.8841 2 51.9 9.7792 29.8883 2 53.0 9.7779 29.8930 3 54.2 9.7675 29.9035 2 55.1 9.7685 29.9174 2 56.1 9.7754 29.9399 2 57.0 9.7884 29.9795 2 58.1 9.7921 30.0077 2 59.1 9.7910 30.0207 2 60.1 9.7920 30.0267 2 61.1 9.7933 30.0345 2 62.1 9.7943 30.0522 2 63.1 9.7944 30.0660 2 64.1 9.7941 30.0713 2 65.1 9.7922 30.0758 2 66.1 9.7909 30.0805 2 67.0 9.7920 30.0841 2 68.0 9.7937 30.0922 2 69.0 9.7964 30.1023 2 69.9 9.8024 30.1105 2 70.9 9.8125 30.1210 2 71.9 9.8271 30.1311 2 72.8 9.8324 30.1418 2 73.8 9.8218 30.1535 2 75.0 9.8177 30.1574 3 76.2 9.8171 30.1599 2 77.1 9.8180 30.1632 2 78.0 9.8215 30.1680 2 78.9 9.8252 30.1791 2 79.8 9.8319 30.1871 2 81.0 9.8342 30.1896 3 82.2 9.8337 30.1917 2 83.1 9.8294 30.1975 2 84.0 9.8215 30.2066 2 84.9 9.8181 30.2188 2 86.1 9.8115 30.2552 3 87.2 9.8021 30.3154 2 88.1 9.7929 30.3666 2 89.0 9.7861 30.3967 2 89.9 9.7796 30.4223 2 91.0 9.7690 30.4518 3 92.2 9.7581 30.4770 2 93.1 9.7535 30.4904 2 94.0 9.7449 30.5042 2 94.9 9.7252 30.5301 2 95.9 9.7060 30.5560 2 97.0 9.6952 30.5730 3 98.2 9.6891 30.5817 2 99.1 9.6868 30.5850 2 100.0 9.6815 30.5913 2 101.0 9.6769 30.5965 2 101.9 9.6712 30.6040 2 102.8 9.6644 30.6121 2 104.0 9.6492 30.6286 3 105.1 9.6323 30.6457 2 106.1 9.6204 30.6549 2 107.0 9.6152 30.6588 2 107.9 9.6021 30.6712 2 109.0 9.5797 30.6947 3 110.2 9.5702 30.7072 2 111.1 9.5676 30.7111 2 112.0 9.5644 30.7131 2 112.9 9.5506 30.7227 2 114.0 9.5180 30.7475 3 115.1 9.5005 30.7628 2 115.9 9.4881 30.7756 2 116.9 9.4823 30.7903 3 117.9 9.4438 30.8129 2 118.9 9.3684 30.8562 3 119.9 9.3375 30.8724 2 120.9 9.3222 30.8787 3 122.0 9.3029 30.8841 3 123.0 9.2926 30.8861 2 124.0 9.2609 30.8943 3 125.0 9.2223 30.9058 2 126.0 9.1948 30.9150 3 126.9 9.1643 30.9265 2 127.9 9.1482 30.9329 3 129.1 9.1416 30.9373 3 130.0 9.1393 30.9401 2 131.0 9.1377 30.9417 3 132.0 9.1346 30.9436 2 132.9 9.1263 30.9482 3 133.9 9.1164 30.9535 2 134.9 9.1110 30.9567 3 135.9 9.1089 30.9587 2 136.9 9.1066 30.9598 3 138.1 9.1026 30.9643 3 139.1 9.0987 30.9673 2 140.1 9.0968 30.9686 3 141.0 9.0954 30.9694 2 142.0 9.0952 30.9697 3 143.0 9.0932 30.9710 2 144.0 9.0930 30.9717 3 145.0 9.0919 30.9721 2 145.9 9.0925 30.9717 3 146.9 9.0932 30.9712 2 147.9 9.0925 30.9717 3 148.9 9.0924 30.9718 2 149.9 9.0907 30.9721 3 151.0 9.0899 30.9721 3 152.0 9.0896 30.9720 2 153.0 9.0872 30.9735 3 154.0 9.0802 30.9779 2 155.0 9.0788 30.9789 3 156.0 9.0767 30.9803 2 157.0 9.0736 30.9844 3 158.0 9.0721 30.9869 2 158.9 9.0712 30.9873 3 160.1 9.0662 30.9911 3 161.0 9.0640 30.9928 2 161.9 9.0641 30.9929 3 163.0 9.0644 30.9925 3 164.1 9.0645 30.9928 3 165.0 9.0613 30.9957 2 165.9 9.0610 30.9962 3 167.1 9.0577 30.9998 3 168.0 9.0553 31.0024 2 168.9 9.0535 31.0054 3 169.9 9.0517 31.0091 3