*2014/01/27 09:44:07.73 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2013/05/06 03:40:18.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 10 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 9D605998 NUMBER OF CHANNELS : 13 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Bottle:Firing_Sequence n/a 1 10 2 Bottle_Number n/a 1 10 3 Pressure decibar 1.941 115.711 4 Temperature:Primary 'deg C (ITS90)' 8.377 10.6101 5 Transmissivity %/metre 0 58.8 6 Fluorescence:URU:Seapoint mg/m^3 0.15 3.444 7 PAR uE/m^2/sec 0 0.42E-01 8 pH:SBE:Nominal n/a 8.395 9.028 9 Salinity:T0:C0 PSS-78 9.7895 30.4522 10 Oxygen:Dissolved:SBE mL/L 4.53 8.543 11 Oxygen:Dissolved:SBE umol/kg 197.7 373.4 12 Number_of_bin_records n/a 121 121 13 Sample_Number n/a 1 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 3 I I 0 3 -99 ' ' 7 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 7 F ' ' 1 8 -99 ' ' 8 F ' ' 3 9 -99 ' ' 9 F ' ' 4 10 -99 ' ' 7 F ' ' 2 11 -99 ' ' 6 F ' ' 1 12 ' ' ' ' 5 I I 0 13 -99 ' ' 5 I I 0 $END $REMARKS Data quality is expressed with the following flags: ---------------------------------------------------------------------------------- 1 = Sample for this measurement was collected but not analyzed. Sample lost. 2 = Acceptable Measurement 3 = Questionable Measurement (Probably Good) 4 = Poor Measurement (Probably Bad) 5 = Measurement Not Reported (Bad) 6 = Mean of replicate measurements 7 = Manual chromatographic peak measurement 8 = Irregular digital chromatographic peak integration 9 = Sample was planned for this measurement from this bottle but was not collected ---------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2013-35 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : WCVI & Northern Inlet Moorings SCIENTIST : Dewey R. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI STATION : DDL EVENT NUMBER : 3 LATITUDE : 49 4.75000 N ! (deg min) LONGITUDE : 123 20.40000 W ! (deg min) WATER DEPTH : 125 ALTIMETER (M) : 9.16 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0585 LOCATION : Mid-ship ! custom item $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------------------------- -------------- ---------- Temperature ' ' 4054 Conductivity ' ' 3321 'Pressure:Digiquartz with TC' ' ' 77511 Temperature:2 ' ' 4700 Conductivity:2 ' ' 1766 Fluorometer:Seapoint ' ' 2228 'Oxygen:SBE 43' ' ' 1438 'Transmissometer:WET Labs C-Star' ' ' 1396 Altimeter ' ' ' ' pH ' ' 0692 PAR/Irradiance:Biospherical/Licor ' ' 4601 $END $REMARKS SOFTWARE VERSION SEASAVE V 7.22.4 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.3 2014/01/18 14:54:38 1210 1210 CLEAN 5.1 2014/01/18 14:55:06 ? ? ADDSAMP 3.6 2014/01/20 17:26:02 1210 1210 BINAVE 4.1.1 2014/01/20 17:26:19 1210 10 MERGE 3.5 2014/01/20 17:28:51 10 10 CLEAN 5.1 2014/01/22 15:22:14 10 10 CALIB 11.8 2014/01/22 15:22:54 10 10 SORT 3.6 2014/01/25 15:55:56 10 10 REMOVECH 8.2 2014/01/25 15:56:28 10 10 CHGUNITS 3.1 2014/01/25 15:58:33 10 10 CHGUNITS 3.1 2014/01/25 15:59:11 10 10 REORDER 1.3 2014/01/25 15:59:55 ? ? HDREDIT2 2.6 2014/01/27 09:44:07 ? ? $END $REMARKS -CLEAN functions: 2014/01/18 14:55:04 20 Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: P:\Cruise_Data_Processing\2013-36\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -MERGE *** Secondary file not found *** Primary file : P:\Cruise_Data_Processing\2013-36\Processing\hydro\2013-36-0003.samavg Secondary file: P:\Cruise_Data_Processing\2013-36\Processing\hydro\2013-36-0003.mrgcln1s -CLEAN functions: 2014/01/22 15:22:14 20 Reset #RECS, MIN & MAX values in header. Remove Sea-Bird comments from the header. Remove remark heading: "Comments from secondary" -CALIB parameters: 2014/01/22 15:22:54 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2013-36\Processing\doc\2013-36-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 18 Oxygen:Dissolved:SBE mL/L 10 0.3000000E-01 0.1072200E+01 -SORT parameters: 2014/01/25 15:55:56 Sorted in ascending order of channel Pressure -REMOVECH 2014/01/25 15:56:28 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Altimeter [metres] Descent_Rate [m/s] Status:Pump Salinity:T1:C1 [PSS-78] Flag -CHANGE units: Temperature reference channel: Temperature:Primary [deg C (ITS90)] Salinity reference channel: Sal* 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -CHANGE units: Temperature reference channel: Temperature:Draw [ ] Salinity reference channel: Sal* - No units changed -HEADER EDITS: 2014/01/27 09:44:07 Applied edit header: P:\Cruise_Data_Processing\2013-36\Processing\doc\HYDRO\2013-36-bot-hdr.txt Channel 1: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 2: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number Channel 3: Pressure [decibar] Format: F10.3 ==> F7.1 Channel 7: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 10: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 8: pH:SBE [n/a] Units: pH Units ==> n/a $END *COMMENTS Analysis methods: ----------------- Oxygen samples were analyzed at sea on an automated Winkler titration system (Brinkmann Dosimat model 665 for titrations, Dosimat model 865 for dispensing standards and a PC950 Colorimeter controlled by AutoOxy software V3.4) with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). For details including a duplicate analysis, see document QF2013-36OXY*.xls. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. Culberson, C.H. 1991. Dissolved oxygen. WOCE Hydrographic Programme Operations and Methods (July 1991). 15pp. * For PDF versions of these papers see folder \\Cruise_Data\DOCUMENTS\Analysis Reference Papers --------------------------------------------------------------------------------- Data Processing Notes: ---------------------- Transmissivity, Fluorescence, pH and PAR data are nominal and unedited except that some records were removed in editing temperature and salinity. For details on how the transmissivity calibration parameters were calculated see the document in folder "\cruise_data\documents\transmissivity". Based on the recommendation from SeaBird, the method for calibration of Dissolved Oxygen concentration was changed from that used for 2011 and some 2012 cruises. For more information see the SeaBird Application Note #64-2, June 2012 revision. The dissolved oxygen analyst reported that the precision was relatively low (0.040mL/L) even after removal of known bad values and outliers selected by the Chauvenet criterion. Based on the analyst's recommendation, the data are reported with only 2 decimal places in mL/L and one decimal places in umol/kg. There was no salinity calibration sampling during this cruise, but cruises before and after this one had the same equipment and salinity was found to be within 0.001 of bottle samples. WARNING: The pH:SBE:Nominal data should be used with caution; no field calibration data were available at the time of processing. Calibration is required for each cast to get absolute values, although general trends within a cast are likely real. There were no samples found for this cast. The log indicates that only sediment samples were taken. For details on the processing see the report: 2013-36-proc.doc. Note: The files from cruises 2013-35 and 2013-36 were processed together.) --------------------------------------------------------------------------------- *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- ------ ---- ------ ------------ Oxygen:Dissolved:SBE mL/L 10 -99 () (0.3E-01 1.0722) $END !1- 2- --3--- ---4---- --5-- ---6--- --7--- ---8--- ---9---- --10-- --11- -12- -13- !Bo Bo Pressu Temperat Trans Fluores PAR pH:SBE: Salinity Oxygen Oxyge Numb Samp !tt tt re ure: missi cence: Nominal :T0:C0 : n: er_o le_ !~u ~u Primary vity URU: Dissol Disso ~bin Numb !en mb Seapoin ved: lved: _rec er !ce er t SBE SBE ords !-- -- ------ -------- ----- ------- ------ ------- -------- ------ ----- ---- ---- *END OF HEADER 10 10 1.9 9.6887 0.0 1.121 0.0 8.857 9.7895 8.04 356.1 121 10 9 9 5.1 10.6101 25.0 3.444 0.0 9.028 27.9309 8.54 373.4 121 9 8 8 10.0 9.1861 41.6 1.620 0.0 8.691 28.9844 6.19 270.4 121 8 7 7 15.0 8.9477 53.2 0.670 0.0 8.607 29.1946 5.73 250.1 121 7 6 6 20.4 8.5915 58.3 0.282 0.0 8.464 29.4446 5.04 220.2 121 6 5 5 29.8 8.5664 58.8 0.249 0.0 8.395 29.5919 4.53 197.7 121 5 4 4 50.5 8.4317 48.0 0.159 0.0 8.467 29.9221 4.97 216.7 121 4 3 3 71.1 8.3804 35.2 0.150 0.0 8.461 30.0920 4.88 212.9 121 3 2 2 100.7 8.3870 34.6 0.161 0.0 8.477 30.4033 4.84 211.2 121 2 1 1 115.7 8.3770 28.8 0.169 0.0 8.473 30.4522 4.79 208.7 121 1