*2014/11/20 09:58:26.85 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2013/04/07 19:15:53.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 5 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 7F0E0A3F NUMBER OF CHANNELS : 25 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Bottle:Firing_Sequence n/a 1 5 2 Bottle_Number n/a 1 5 3 Pressure decibar 2.206 20.174 4 Temperature:Primary 'deg C (ITS90)' 9.3376 9.9672 5 Transmissivity %/metre 12.7 18.6 6 Fluorescence:URU:Seapoint mg/m^3 5.34 9.184 7 PAR uE/m^2/sec 0.117 1123.764 8 PAR:Reference uE/m^2/sec 753.137 1331.153 9 Salinity:T0:C0 PSS-78 28.0405 28.6532 10 Oxygen:Dissolved:SBE mL/L 8.691 11.039 11 Oxygen:Dissolved:SBE umol/kg 379.6 482.4 12 Number_of_bin_records n/a 121 121 13 Sample_Number n/a 192 196 14 Temperature:Draw 'deg C (ITS90)' 9.3 9.7 15 Salinity:Bottle PSS-78 28.6377 28.6377 16 Flag:Salinity:Bottle n/a 17 Oxygen:Dissolved mL/L 8.922 11.068 18 Oxygen:Dissolved umol/kg 389.6901 483.6935 19 Flag:Oxygen:Dissolved n/a 20 Nitrate_plus_Nitrite umol/L 0.2 3.9 21 Flag:Nitrate_plus_Nitrite n/a 22 Silicate umol/L 6 20.7 23 Flag:Silicate n/a 24 Phosphate umol/L 0.29 1.23 25 Flag:Phosphate n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 3 I I 0 3 -99 ' ' 7 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 7 F ' ' 1 8 -99 ' ' 7 F ' ' 1 9 -99 ' ' 9 F ' ' 4 10 -99 ' ' 7 F ' ' 2 11 -99 ' ' 6 F ' ' 1 12 ' ' ' ' 5 I I 0 13 -99 ' ' 5 I I 0 14 -99 ' ' 5 F R4 1 15 -99 ' ' 9 F R4 4 16 0 ' ' 3 NQ C ' ' 17 -99 ' ' 8 F R4 3 18 -99 ' ' 6 F ' ' 1 19 0 ' ' 3 NQ C ' ' 20 -99 ' ' 6 F R4 1 21 0 ' ' 3 NQ C ' ' 22 -99 ' ' 6 F R4 1 23 0 ' ' 3 NQ C ' ' 24 -99 ' ' 7 F R4 2 25 0 ' ' 3 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was collected but not analyzed. Sample lost. 2 = Acceptable Measurement 3 = Questionable Measurement (Probably Good) 4 = Poor Measurement (Probably Bad) 5 = Measurement Not Reported (Bad) 6 = Mean of replicate measurements 7 = Manual chromatographic peak measurement 8 = Irregular digital chromatographic peak integration 9 = Sample was planned for this measurement from this bottle but was not collected -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2013-16 AGENCY : 'WVL, Marine Environment and Habitat Science,' CONTINUED : ' Vancouver, B.C.' COUNTRY : Canada PROJECT : Aquaculture Shellfish Carrying Capacity SCIENTIST : Sutherland T. PLATFORM : Vector *LOCATION GEOGRAPHIC AREA : Johnstone Strait STATION : GH 15 EVENT NUMBER : 152 LATITUDE : 50 5.50000 N ! (deg min) LONGITUDE : 124 59.96000 W ! (deg min) WATER DEPTH : 21 ALTIMETER (M) : 1.83 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0585 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------------------------- -------------- ---------- Temperature ' ' 4054 Conductivity ' ' 3321 'Pressure:Digiquartz with TC' ' ' 77511 Temperature:2 ' ' 4700 Conductivity:2 ' ' 1766 Fluorometer:Seapoint ' ' ' ' 'Oxygen:SBE 43' ' ' 1438 'Transmissometer:WET Labs C-Star' ' ' 1185DDR Altimeter ' ' ' ' pH ' ' 0692 PAR/Irradiance:Biospherical/Licor ' ' 4601 Unavailable ' ' ' ' $END $REMARKS SOFTWARE VERSION SEASAVE V 7.22.4 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.2 2013/08/14 15:32:57 605 605 CLEAN 5.1 2013/08/14 15:35:22 605 605 ADDSAMP 3.5 2013/08/15 11:34:07 605 605 BINAVE 4.1.1 2013/08/15 11:43:56 605 5 MERGE 3.5 2013/08/19 11:15:00 5 5 CLEAN 5.1 2013/08/19 11:15:06 5 5 CALIB 11.7 2013/08/20 13:53:29 5 5 SORT 3.6 2013/08/27 13:29:11 5 5 REMOVECH 8.1.1 2013/08/27 13:31:01 5 5 CHGUNITS 3.0 2013/08/27 13:31:58 5 5 CHGUNITS 3.0 2013/08/27 13:35:54 5 5 REORDER 1.3 2013/08/27 13:35:59 ? ? HDREDIT2 2.6 2013/08/27 13:47:33 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:39:20 5 5 CHANGE_FLAGS 2.0 2014/11/20 09:58:26 5 5 $END $REMARKS -CLEAN functions: 2013/08/14 15:35:11 20 Reset #RECS, MIN & MAX values in header. Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: P:\Cruise_Data_Processing\2013-16\Processing\HYDRO\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2013/08/19 11:15:00 Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Event_Number, Bottle:Position, Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Temperature:Draw, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Ammonium, Flag:Ammonium, pH, Flag:pH, Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : P:\Cruise_Data_Processing\2013-16\Processing\hydro\2013-16-0152.samavg Secondary file: P:\Cruise_Data_Processing\2013-16\Processing\hydro\2013-16-0152.mrgcln1s -SORT parameters: 2013/08/15 14:38:57 Sorted in ascending order of channel Bottle_Number -CLEAN functions: 2013/08/19 11:15:05 20 Reset #RECS, MIN & MAX values in header. Remove Sea-Bird comments from the header. Remove remark heading: "Comments from secondary" -CALIB parameters: 2013/08/20 13:53:29 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2013-16\Processing\doc\2013-16-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 19 Oxygen:Dissolved:SBE mL/L 10 0.0000000E+00 0.1070100E+01 -SORT parameters: 2013/08/27 13:29:11 Sorted in ascending order of channel Pressure* -REMOVECH 2013/08/27 13:31:01 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] pH:SBE [pH Units] Altimeter [metres] Descent_Rate [m/s] Status:Pump Salinity:T1:C1 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -CHANGE units: 'Oxygen:Dissolved' changed from mL/L to umol/kg -HEADER EDITS: 2013/08/27 13:47:33 Applied edit header: P:\Cruise_Data_Processing\2013-16\Processing\doc\HYDRO\2013-16-bot-hdr.txt Channel 1: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 2: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number Channel 3: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 6: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 7: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 9: Salinity:Practical:T0:C0 [PSS-78] Name: Salinity:T0:C0 ==> Salinity:Practical:T0:C0 Channel 10: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 14: Temperature:Draw [deg C (ITS90)] Units: ==> deg C (ITS90) Format: F7.2 ==> F5.1 Channel 15: Salinity:Bottle [PSS-78] Units: ==> PSS-78 Channel 16: Flag:Salinity:Bottle [n/a] Units: ==> n/a Channel 17: Oxygen:Dissolved [mL/L] Units: ==> mL/L Channel 19: Flag:Oxygen:Dissolved [n/a] Units: ==> n/a Channel 20: Nitrate_plus_Nitrite [umol/L] Units: ==> umol/L Channel 21: Flag:Nitrate_plus_Nitrite [n/a] Units: ==> n/a Channel 22: Silicate [umol/L] Units: ==> umol/L Channel 23: Flag:Silicate [n/a] Units: ==> n/a Channel 24: Phosphate [umol/L] Units: ==> umol/L Channel 25: Flag:Phosphate [n/a] Units: ==> n/a Channel 8: PAR:Reference [uE/m^2/sec] Format: F11.3 ==> F7.1 $END *COMMENTS Analysis methods: ----------------- Oxygen samples were analyzed at sea on an automated Winkler titration system (Brinkmann Dosimat model 665 for titrations, Dosimat model 865 for dispensing standards and a PC950 Colorimeter controlled by AutoOxy software V3.4) with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). For details including a duplicate analysis, see document QF2013-16OXY*.xls. Salinity samples were collected in 200 mL type ll glass bottles with reusable silicone inserts supplied by Xiamen Cuten Accessories Industry Limited and screw caps supplied by Ocean Scientific International Limited. They were analyzed in a temperature-controlled lab on a Guildline 8400B Salinometer (S/N 68572) standardized with IAPSO standard seawater 8 days after collection. Full details are in file QF2013-16SAL*.xls. Nutrient samples were collected in plastic tubes and quick frozen in aluminum blocks stored in -20 freezer. THey were later analyzed at IOS using an Astoria analyzer following methods described in Barwell-Clarke and Whitney (1996). For raw data, precision and duplicate details see worksheet QF2013-16nuts*.xls. References: 1. Barwell-Clarke, J. and Whitney, F. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. 2. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 3. Culberson, C.H. 1991. Dissolved oxygen. WOCE Hydrographic Programme Operations and Methods (July 1991). 15pp. * For PDF versions of these papers see folder \\Cruise_Data\DOCUMENTS\Analysis Reference Papers --------------------------------------------------------------------------------- Data Processing Notes: ---------------------- Transmissivity, Fluorescence, PAR and PAR:Reference data are nominal and unedited except that some records were removed in editing temperature and salinity. For details on how the transmissivity calibration parameters were calculated see the document in folder "\cruise_data\documents\transmissivity". Based on the recommendation from SeaBird, the method for calibration of Dissolved Oxygen concentration was changed from that used for 2011 and some 2012 cruises. For more information see the SeaBird Application Note #64-2, June 2012 revision. The Oxygen:Dissolved:SBE data are considered, very roughly, to be: ±1.0 mL/L from 0 to 35db ±0.3 mL/L from 35 to 150db ±0.08 mL/L below 150db The comparison of CTD salinity with bottle samples did not produce useful results. The two CTD salinity channels are in reasonable agreement with each other, and the temperature and conductivity sensors have only been used for 2 other cruises since their last factory calibration. A pH sensor was attached to the CTD, but the data are not included in the files to be placed in the IOS Data Library because no field calibration information was available at the time of processing, and there are some concerns about how the sensors perform. For details on the processing see the report: 2013-16-proc.doc. --------------------------------------------------------------------------------- *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- ------ ---- ------ ------------ Oxygen:Dissolved:SBE mL/L 10 -99 () (0 1.0701) $END !1- 2- --3--- ---4---- --5-- ---6--- --7--- --8--- ---9---- --10-- --11- -12- -13- -14- ---15--- 16 ---17-- --18- 19 --20- 21 --22- 23 --24-- 25 !Bo Bo Pressu Temperat Trans Fluores PAR PAR: Salinity Oxygen Oxyge Numb Samp Temp Salinity Fl Oxygen: Oxyge Fl Nitra Fl Silic Fl Phosph Fl !tt tt re ure: missi cence: Refere :T0:C0 : n: er_o le_ erat :Bottle ag Dissolv n: ag te_ ag ate ag ate ag !~u ~u Primary vity URU: nce Dissol Disso ~bin Numb ure: ~o ed Disso ~o plus_ ~t ~i ~p !en mb Seapoin ved: lved: _rec er Draw tt lved lv Nitri ri ca ha !ce er t SBE SBE ords le ed te te te te !-- -- ------ -------- ----- ------- ------ ------ -------- ------ ----- ---- ---- ---- -------- -- ------- ----- -- ----- -- ----- -- ------ -- *END OF HEADER 5 5 2.2 9.9672 12.7 5.340 1123.8 1331.2 28.0405 11.04 482.4 121 196 9.7 -99.0000 0 11.068 483.7 0 0.2 0 6.0 0 0.29 0 4 4 9.7 9.7353 16.2 9.184 14.2 887.9 28.4367 9.74 425.4 121 195 9.4 -99.0000 0 9.366 409.2 6 2.3 0 16.5 0 0.86 0 3 3 16.0 9.4691 18.5 6.379 0.8 753.1 28.6021 9.20 401.9 121 194 9.3 -99.0000 0 9.093 397.2 0 3.3 0 19.5 0 1.14 0 2 2 17.9 9.4303 18.6 6.714 0.3 833.9 28.6240 9.00 393.2 121 193 9.3 -99.0000 0 9.029 394.4 0 3.6 0 20.0 0 1.19 0 1 1 20.2 9.3376 16.3 7.154 0.1 889.4 28.6532 8.69 379.6 121 192 9.4 28.6377 0 8.922 389.7 0 3.9 0 20.7 0 1.23 0