*2014/11/20 09:58:21.36 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2012/10/19 16:52:58.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 2 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : E4E28CDA NUMBER OF CHANNELS : 20 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Bottle:Firing_Sequence n/a 1 2 2 Bottle_Number n/a 1 2 3 Pressure decibar 1.83 1.897 4 Temperature:Secondary 'deg C (ITS90)' 10.5891 10.5894 5 Transmissivity %/metre 17.4 18.1 6 Fluorescence:URU:Seapoint mg/m^3 0.358 0.365 7 Fluorescence:URU:Wetlabs mg/m^3 0.495 0.501 8 Salinity:T1:C1 PSS-78 25.2076 25.237 9 Oxygen:Dissolved:SBE mL/L 5.132 5.138 10 Oxygen:Dissolved:SBE umol/kg 224.7797 225.0476 11 Number_of_bin_records n/a 60 241 12 Sample_Number n/a 51 52 13 Salinity:Bottle PSS-78 25.2364 25.2364 14 Flag:Salinity:Bottle n/a 15 Nitrate_plus_Nitrite umol/L 19.1 19.1 16 Flag:Nitrate_plus_Nitrite n/a 17 Silicate umol/L 42.1 42.1 18 Flag:Silicate n/a 19 Phosphate umol/L 1.78 1.78 20 Flag:Phosphate n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 3 I I 0 3 -99 ' ' 7 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 8 F ' ' 3 8 -99 ' ' 9 F ' ' 4 9 -99 ' ' 7 F ' ' 2 10 -99 ' ' 6 F ' ' 1 11 ' ' ' ' 5 I I 0 12 -99 ' ' 5 I I 0 13 -99 ' ' 9 F R4 4 14 0 ' ' 3 NQ C ' ' 15 -99 ' ' 6 F R4 1 16 0 ' ' 3 NQ C ' ' 17 -99 ' ' 6 F R4 1 18 0 ' ' 3 NQ C ' ' 19 -99 ' ' 7 F R4 2 20 0 ' ' 3 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2012-71 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Strait of Georgia Moorings SCIENTIST : Johannessen S. PLATFORM : Vector *LOCATION GEOGRAPHIC AREA : Strait of Georgia STATION : FR02 EVENT NUMBER : 12 LATITUDE : 49 6.21000 N ! (deg min) LONGITUDE : 123 18.02000 W ! (deg min) WATER DEPTH : 11 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0506 $REMARKS SOFTWARE VERSION SEASAVE V 7.21G $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1.2 2013/01/16 10:14:23 301 301 CLEAN 5.0.4 2013/01/16 10:14:43 301 301 ADDSAMP 3.5 2013/01/16 10:24:15 301 301 BINAVE 4.1.1 2013/01/16 10:24:26 301 2 MERGE 3.4 2013/01/17 13:55:35 2 2 CLEAN 5.1 2013/03/05 17:02:22 2 2 CALIB 11.7 2013/03/05 17:02:29 2 2 SORT 3.6 2013/03/05 17:02:41 2 2 REMOVECH 8.1.1 2013/03/06 09:59:11 2 2 CHGUNITS 3.0 2013/03/06 10:00:28 2 2 REORDER 1.3 2013/03/06 10:01:21 ? ? HDREDIT2 2.6 2013/03/06 10:08:17 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:38:59 2 2 CHANGE_FLAGS 2.0 2014/11/20 09:58:21 2 2 $END $REMARKS -CLEAN functions: 2013/01/16 10:14:40 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: P:\Cruise_Data_Processing\2012-71\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2013/01/17 13:55:34 2013/01/17 13:55:35 2013/01/17 13:55: Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Event_Number, Bottle:Position, Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Temperature:Draw, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Ammonium, Flag:Ammonium, pH, Flag:pH, Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : P:\Cruise_Data_Processing\2012-71\Processing\hydro\2012-71-0012.samavg Secondary file: P:\Cruise_Data_Processing\2012-71\Processing\hydro\2012-71-0012.mrgcln1s -SORT parameters: 2013/01/16 10:35:58 Sorted in ascending order of channel Bottle_Number -CLEAN functions: 2013/03/05 17:02:22 20 Reset #RECS, MIN & MAX values in header. Remove Sea-Bird comments from the header. Remove remark heading: "Comments from secondary" -CALIB parameters: 2013/03/05 17:02:29 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2012-71\Processing\doc\2012-71-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 19 Oxygen:Dissolved:SBE mL/L 10 0.5180000E-01 0.1045700E+01 -SORT parameters: 2013/03/05 17:02:41 Sorted in ascending order of channel Pressure -REMOVECH 2013/03/06 09:59:11 The following CHANNEL(S) were removed: Scan_Number Temperature:Primary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] pH:SBE [pH Units] Altimeter [metres] Status:Pump Descent_Rate [m/s] Salinity:T0:C0 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2013/03/06 10:08:17 Applied edit header: P:\Cruise_Data_Processing\2012-71\Processing\doc\HYDRO\2012-71-bot-hdr.txt Channel 1: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 2: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number Channel 3: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 7: Fluorescence:URU:Wetlabs [mg/m^3] Name: Fluorescence:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs Channel 8: Salinity:Practical:T1:C1 [PSS-78] Name: Salinity:T1:C1 ==> Salinity:Practical:T1:C1 Channel 9: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 13: Salinity:Bottle [PSS-78] Units: ==> PSS-78 Channel 14: Flag:Salinity:Bottle [n/a] Units: ==> n/a Channel 15: Nitrate_plus_Nitrite [umol/L] Units: ==> umol/L Channel 16: Flag:Nitrate_plus_Nitrite [n/a] Units: ==> n/a Channel 17: Silicate [umol/L] Units: ==> umol/L Channel 18: Flag:Silicate [n/a] Units: ==> n/a Channel 19: Phosphate [umol/L] Units: ==> umol/L Channel 20: Flag:Phosphate [n/a] Units: ==> n/a Channel 6: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint $END *COMMENTS Analysis methods: ----------------- Oxygen samples were analyzed at sea on an automated Winkler titration system (Brinkmann Dosimat model 765 and a PC950 Colorimeter controlled by AutoOxy software V3.4) with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). For details including a duplicate analysis, see document QF2012-71oxy*.xls. Salinity samples were collected in 200 mL type ll glass bottles with reusable silicone inserts supplied by Xiamen Cuten Accessories Industry Limited and screw caps supplied by Ocean Scientific International Limited. They were analyzed in a temperature-controlled lab on a Guildline 8400B Salinometer (S/N 68572) standardized with IAPSO standard seawater 24 days after collection. Full details including a duplicate analysis are in file QF2012-71SAL*.xls. Nutrient samples were collected in plastic tubes and quick frozen in aluminum blocks stored in a -20C freezer and analyzed later at the Institute of Ocean Sciences using an Astoria analyzer following methods described in Barwell-Clarke and Whitney (1996). File QF2012-71nuts*.xls includes the raw data and a precision study. References: 1. Barwell-Clarke, J. and Whitney, F. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. 2. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 3. Culberson, C.H. 1991. Dissolved oxygen. WOCE Hydrographic Programme Operations and Methods (July 1991). 15pp. * For PDF versions of these papers see folder \\Cruise_Data\DOCUMENTS\Analysis Reference Papers Data Processing Notes: ---------------------- Transmissivity and fluorescence data are nominal and unedited except that some records were removed in editing temperature and salinity. For details on how the transmissivity calibration parameters were calculated see the document in folder "\cruise_data\documents\transmissivity". Data from the pH:SBE channel have been removed from this file because there was no field calibration information available at the time of processing. For further processing details see the processing report 2012-71-proc.doc. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- ------ ---- ------ ------------ Oxygen:Dissolved:SBE mL/L 10 -99 () (0.518E-01 1.0457) $END !1- 2- --3--- ---4---- --5-- ---6--- ---7--- ---8---- --9--- --10- -11- -12- ---13--- 14 --15- 16 --17- 18 --19-- 20 !Bo Bo Pressu Temperat Trans Fluores Fluores Salinity Oxygen Oxyge Numb Samp Salinity Fl Nitra Fl Silic Fl Phosph Fl !tt tt re ure: missi cence: cence: :T1:C1 : n: er_o le_ :Bottle ag te_ ag ate ag ate ag !~u ~u Secondar vity URU: URU: Dissol Disso ~bin Numb ~o plus_ ~t ~i ~p !en mb y Seapoin Wetlabs ved: lved: _rec er tt Nitri ri ca ha !ce er t SBE SBE ords le te te te te !-- -- ------ -------- ----- ------- ------- -------- ------ ----- ---- ---- -------- -- ----- -- ----- -- ------ -- *END OF HEADER 2 2 1.8 10.5891 17.4 0.365 0.495 25.2370 5.13 224.8 241 52 25.2364 0 19.1 0 42.1 0 1.78 0 1 1 1.9 10.5894 18.1 0.358 0.501 25.2076 5.14 225.0 60 51 -99.0000 0 -99.0 0 -99.0 0 -99.00 0