*2024/04/15 16:29:13.61 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *FILE START TIME : UTC 2011/08/17 01:15:10.000 TIME INCREMENT : 0 0 0 1 0 ! (day hr min sec ms) NUMBER OF RECORDS : 9 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : D3C9204B NUMBER OF CHANNELS : 15 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- -------------------------- --------------- -------------- -------------- 1 Bottle_Number n/a 1 9 2 Bottle:Firing_Sequence n/a 1 9 3 Pressure decibar 1.569 147.475 4 Temperature:Secondary 'deg C (ITS90)' 13.0048 13.6362 5 Transmissivity %/metre 29.9 43.2 6 Fluorescence:URU:Wetlabs mg/m^3 0.953 1.643 7 Salinity:T1:C1 PSS-78 28.3864 29.1493 8 Oxygen:Dissolved:SBE mL/L 4.843 5.152 9 Oxygen:Dissolved:SBE umol/kg 211.6 225.2 10 Number_of_bin_records n/a 11 11 11 Sample_Number n/a 55 63 12 Temperature:Draw 'deg C (ITS90)' 12.9 13.9 13 Oxygen:Dissolved mL/L 4.878 5.148 14 Oxygen:Dissolved umol/kg 213.1041 225.0503 15 Flag:Oxygen:Dissolved n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 3 I I 0 3 -99 ' ' 7 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 9 F ' ' 4 8 -99 ' ' 7 F ' ' 2 9 -99 ' ' 6 F ' ' 1 10 ' ' ' ' 5 I I 0 11 -99 ' ' 5 I I 0 12 -99 ' ' 6 F R4 1 13 -99 ' ' 7 F R4 2 14 -99 ' ' 6 F ' ' 0 15 0 ' ' 3 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2011-63 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Paleoseismic SCIENTIST : Dallimore A. PLATFORM : Vector *LOCATION GEOGRAPHIC AREA : Barkley Sound and Clayoquot Sound STATION : CL02 EVENT NUMBER : 12 LATITUDE : 49 13.99000 N ! (deg min) LONGITUDE : 125 45.47000 W ! (deg min) WATER DEPTH : 140 ALTIMETER (M) : 4.22 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $REMARKS SOFTWARE VERSION SEASAVE V 7.21D $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2012/03/05 17:44:50 99 99 CLEAN 5.0.4 2012/03/05 17:45:02 ? ? ADDSAMP 3.5 2012/03/06 08:45:13 99 99 BINAVE 4.1.1 2012/03/06 08:45:20 99 9 MERGE 3.4 2012/03/07 13:06:47 9 9 CLEAN 5.0.4 2012/03/07 13:06:50 9 9 CALIB 11.7 2012/03/08 14:01:12 9 9 SORT 3.5 2012/03/08 14:01:34 9 9 REMOVECH 8.1.1 2012/03/08 14:05:14 9 9 CHGUNITS 3.0 2012/03/08 14:06:50 9 9 CHGUNITS 3.0 2012/03/08 14:07:04 9 9 REORDER 1.3 2012/03/08 14:07:52 ? ? HDREDIT2 2.5.1 2012/03/08 14:23:47 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:36:55 9 9 CHANGE_FLAGS 2.0 2014/11/20 09:57:55 9 9 HDREDIT2 3.2 2024/04/15 16:29:13 ? ? $END $REMARKS -CLEAN functions: 2012/03/05 17:45:02 20 Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: P:\Cruise_Data_Processing\2011-63\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2012/03/07 13:06:47 2012/03/07 13:06:47 2012/03/07 13:06: Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Event_Number, Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Temperature:Draw, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Ammonium, Flag:Ammonium, pH, Flag:pH, Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : P:\Cruise_Data_Processing\2011-63\Processing\hydro\2011-63-0012.samavg Secondary file: P:\Cruise_Data_Processing\2011-63\Processing\hydro\2011-63-0012.mrgcln1s Comments from secondary file: P:\Cruise_Data_Processing\2011-63\Processing\hydro\2011-63-0012.mrgcln1s ------------------------------------------------------------------------ -SORT parameters: 2012/03/07 13:06:15 Sorted in ascending order of channel Bottle_Number -CLEAN functions: 2012/03/07 13:06:49 20 Reset #RECS, MIN & MAX values in header. Remove Sea-Bird comments from the header. -CALIB parameters: 2012/03/08 14:01:12 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2011-63\Processing\doc\2011-63-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 9 Fluorescence:Wetlabs:ECO-AFL mg/m^3 10 0.6100000E-01 0.1000000E+01 -SORT parameters: 2012/03/08 14:01:34 Sorted in ascending order of channel Pressure [dbars] -REMOVECH 2012/03/08 14:05:14 The following CHANNEL(S) were removed: Scan_Number Temperature:Primary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] pH:SBE [pH Units] Altimeter [metres] Status:Pump Descent_Rate [m/s] Salinity:T0:C0 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -CHANGE units: 'Oxygen:Dissolved' changed from mL/L to umol/kg -HEADER EDITS: 2012/03/08 14:23:47 Applied edit header: P:\Cruise_Data_Processing\2011-63\Processing\doc\2011-63-bot-hdr.txt Channel 2: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 1: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number Channel 3: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 6: Fluorescence:URU:Wetlabs [mg/m^3] Name: Fluorescence:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs Channel 7: Salinity:Practical:T1:C1 [PSS-78] Name: Salinity:T1:C1 ==> Salinity:Practical:T1:C1 Channel 8: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 12: Temperature:Draw [deg C (ITS90)] Units: ==> deg C (ITS90) Channel 13: Oxygen:Dissolved [mL/L] Units: mg/m^3 ==> mL/L -HEADER EDITS: 2024/04/15 16:29:13 Channel 12: Temperature:Draw [deg C (ITS90)] Format: F5.1 ==> F6.1 $END *COMMENTS DO: ALL SAMPLES: Due to poor standard and blank precision, the great variability between standardizations and the lack of duplicate samples resulting in poor sample precision (Sp= 0.027), all data are reported to the second decimal place only. Where the draw temperature were not available, extracted CHL values are reported only in mL/L. Otherwise both volume and mass units are reported. Analysis methods: ----------------- Oxygen samples were analyzed at sea using an automated Winkler titration system (Brinkmann Dosimat model 765 and a PC950 Colorimeter controlled by AutoOxy software V3.4) with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). For details including a duplicate analysis, see document QF2011-63oxy*.xls. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. Culberson, C.H. 1991. Dissolved oxygen. WOCE Hydrographic Programme Operations and Methods (July 1991). 15pp. * For PDF versions of these papers see folder \\Cruise_Data\DOCUMENTS\Analysis Reference Papers Data Processing Notes: ---------------------- Transmissivity and SBE Fluorescence data are nominal and unedited. For details on how the transmissivity calibration parameters were calculated see the document in folder "\cruise_data\documents\transmissivity". SBE DO calibration was done using the method described in the SeaBird Application NOte #64-2. For further processing details see the processing report 2011-63-proc.doc. *CALIBRATION $TABLE: CORRECTED CHANNELS !Name Units Fmla Pad Coefficients !------------------------------ -------- ---- ------ ------------ Fluorescence:Wetlabs:ECO-AFL mg/m^3 10 -99 () (0.61E-01 1) $END !1- 2- --3--- ---4---- --5-- ---6--- ---7---- --8--- --9-- -10- -11- --12- --13-- --14- 15 !Bo Bo Pressu Temperat Trans Fluores Salinity Oxygen Oxyge Numb Samp Tempe Oxygen Oxyge Fl !tt tt re ure: missi cence: :T1:C1 : n: er_o le_ ratur : n: ag !~u ~u Secondar vity URU: Dissol Disso ~bin Numb e: Dissol Disso ~o !mb en y Wetlabs ved: lved: _rec er Draw ved lved lv !er ce SBE SBE ords ed !-- -- ------ -------- ----- ------- -------- ------ ----- ---- ---- ----- ------ ----- -- *END OF HEADER 9 9 1.6 13.6362 38.5 1.643 28.3864 5.15 225.2 11 63 13.4 5.15 225. 0 8 8 10.0 13.1147 43.2 1.047 28.7913 4.90 214.2 11 62 13.9 4.93 216. 0 7 7 19.7 13.1218 42.6 1.166 28.8288 4.91 214.7 11 61 13.9 4.95 216. 0 6 6 30.0 13.1302 39.9 1.293 28.9578 4.93 215.2 11 60 12.9 4.96 217. 0 5 5 49.4 13.0652 38.4 1.097 29.0636 4.89 213.7 11 59 12.9 4.93 215. 0 4 4 74.7 13.0231 36.2 1.230 29.1128 4.86 212.5 11 58 12.9 4.89 214. 0 3 3 99.8 13.0078 36.3 1.196 29.1463 4.86 212.2 11 57 12.9 4.89 214. 0 2 2 124.7 13.0048 29.9 1.152 29.1445 4.84 211.6 11 56 12.9 4.88 213. 0 1 1 147.5 13.0120 34.5 0.953 29.1493 4.86 212.2 11 55 12.9 4.88 213. 0