*2013/12/16 15:36:40.70 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2011/06/29 19:58:19.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 30 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 1117F52 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.916 30.585 2 Temperature 'deg C (ITS90)' 7.9851 10.80419 3 Salinity:T0:C0 PSS-78 30.83876 32.2008 4 Number_of_bin_records n/a 1 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-37\Pro $END *ADMINISTRATION MISSION : 2011-37 AGENCY : PBS, Salmon and Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : Viking Storm *LOCATION GEOGRAPHIC AREA : WCVI / BC Inlets STATION : DE05 EVENT NUMBER : 292 LATITUDE : 54 9.94500 N ! (deg min) LONGITUDE : 132 43.44000 W ! (deg min) WATER DEPTH : 43 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4076 $REMARKS SOFTWARE VERSION 1.59 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2012/02/06 16:38:03 711 711 MERGEHDR 1.1 2012/02/06 17:12:57 711 711 SHIFTDAT 3.4 2012/02/07 10:08:21 711 711 CALIB 11.7 2012/02/07 14:05:15 711 711 DELETE 6.3 2012/02/07 14:15:53 711 236 CLIP 1.3 2012/02/07 14:17:39 236 198 CTDEDIT 4.61 2012/02/09 08:59:18 198 165 BINAVE 4.1.1 2012/02/09 15:26:13 165 30 REMOVECH 8.1.1 2012/02/09 16:24:40 30 30 HDREDIT2 2.5.1 2012/02/09 16:46:44 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:36:40 30 30 $END $REMARKS -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -1.80 Salinity was recalculated after shift -CALIB parameters: 2012/02/07 14:05:15 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.1800000E+01 0.1000000E+01 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 20.64 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -CTDEDIT 2012/02/09 08:59:18 33 records were deleted in this editing session. 9 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2012/02/09 16:24:40 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Flag -HEADER EDITS: 2012/02/09 16:46:44 Applied edit header: P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-HDR-SBE19.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 3: Salinity:Practical:T0:C0 [PSS-78] Name: Salinity:T0:C0 ==> Salinity:Practical:T0:C0 $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\HighSeaSalmon\Desktop\HS201137\CTD DATA\D E05-292.hex Software Version 1.59 Temperature SN = 4076 Conductivity SN = 4076 System UpLoad Time = Jun 29 2011 16:00:26 HS201137 F/V VIKING STORM DE05 ds SeacatPlus V 1.1a SERIAL NO. 4076 29 Jun 2011 22:53:40 vbatt = 11.7, vlith = 8.3, ioper = 62.6 ma, ipump = 92.3 ma, status = not logging number of scans to average = 1 samples = 7476, free = 755124, casts = 6 mode = profile, minimum cond freq = 3137, pump delay = 40 sec ignore magnetic switch = no battery type = ALKALINE, battery cutoff = 7.5 volts pressure sensor = strain gauge, range = 1450.0 SBE 38 = no, Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = n o output format = raw HEX S> SeacatPlus V 1.1a SERIAL NO. 4076 29 Jun 2011 22:53:48 temperature: 27-mar-10 TA0 = 1.259230e-03 TA1 = 2.589226e-04 TA2 = 4.147257e-07 TA3 = 1.392599e-07 TOFFSET = 0.000000e+00 conductivity: 27-mar-10 G = -1.048555e+00 H = 1.515496e-01 I = -4.256497e-04 J = 5.350216e-05 CF0 = 2.637008e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 613, range = 1450 psia: 25-mar-10 PA0 = 6.334072e-01 PA1 = 4.423796e-03 PA2 = -1.693695e-11 PTCA0 = 5.212516e+05 PTCA1 = 1.141998e+01 PTCA2 = -2.199784e-01 PTCB0 = 2.486088e+01 PTCB1 = -6.250001e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -5.700636e+01 PTEMPA1 = 5.248906e+01 PTEMPA2 = -3.786838e-02 POFFSET = 0.000000e+00 volt 0: offset = -4.811000e-02, slope = 1.249733e+00 volt 1: offset = -4.786667e-02, slope = 1.249396e+00 volt 2: offset = -4.786667e-02, slope = 1.251271e+00 volt 3: offset = -4.782667e-02, slope = 1.249709e+00 EXTFREQSF = 1.000114e+00 dh cast 5 29 Jun 2011 19:58:19 samples 4065 to 4775, avg = 1, stop = mag switch S> # nquan = 7 # nvalues = 711 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity, Practical [PSU] # name 6 = flag: flag # span 0 = 1, 711 # span 1 = -2.188, 28.840 # span 2 = 7.9547, 12.2649 # span 3 = 0.021473, 3.493720 # span 4 = -1.118, 1.200 # span 5 = 0.1366, 32.2326 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Jun 29 2011 19:58:19 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 4076 # 27-Mar-10 # 1.25923000e-003 # 2.58922600e-004 # 4.14725700e-007 # 1.39259900e-007 # 1.00000000 # 0.0000 # # # # # # 4076 # 27-Mar-10 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -1.04855500e+000 # 1.51549600e-001 # -4.25649700e-004 # 5.35021500e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 4076 # 25-Mar-10 # 6.33407207e-001 # 4.42379573e-003 # -1.69369473e-011 # -5.70063579e+001 # 5.24890589e+001 # -3.78683798e-002 # 5.21251625e+005 # 1.14199848e+001 # -2.19978366e-001 # 2.48608750e+001 # -6.25000000e-004 # 0.00000000e+000 # 0.000000 # # # # datcnv_date = Feb 06 2012 15:53:41, 7.21d [datcnv_vars = 5] # datcnv_in = P:\Cruise_Data_Processing\2011-37\RAW\CTD\renamed files\2011-37-02 92.hex P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # datcnv_skipover = 0 # filter_date = Feb 06 2012 16:30:58, 7.21d # filter_in = P:\Cruise_Data_Processing\2011-37\Processing\convert\2011-37-0292. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Feb 06 2012 16:33:41, 7.21d [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2011-37\Processing\filter\2011-37-0292.c nv P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # file_type = ascii END* CTDEDIT was used to clean salinity and to remove records corrupted by shed wakes. Data Processing Notes: Salinity samples were available from near 10m, but the exact depth of firing is impossible to determine. The comparison of CTD salinity with those samples suggests there was no significant drift in calibration. Errors due to mismatch of conductivity and temperature lead to errors on the order of +/-0.005psu. For details on the processing see processing report: 2011-37-proc.doc. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- ------- ---- ------ ------------ Pressure dbars 10 -99 () (1.8 1) $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 2.0 10.8042 30.8388 10 3.0 10.6543 30.9055 2 4.0 10.2259 31.0233 6 5.0 9.6355 31.2207 6 6.0 9.5076 31.2620 6 7.0 9.5084 31.2550 6 8.0 9.4579 31.2726 5 9.0 9.4553 31.2701 6 10.0 9.4223 31.2782 6 11.0 9.3964 31.2830 3 12.0 9.1557 31.3350 1 13.0 9.0476 31.3689 6 14.0 9.0035 31.3927 6 15.0 8.9786 31.4245 6 16.0 8.9831 31.4381 6 17.0 8.9650 31.4749 5 18.0 8.8366 31.5801 6 19.0 8.7738 31.6168 3 20.0 8.6882 31.6434 3 21.0 8.6768 31.6624 5 22.0 8.6924 31.6672 6 23.0 8.6725 31.6717 6 24.0 8.4776 31.7572 6 25.0 8.3447 31.8142 6 26.0 8.2548 31.8959 5 27.0 8.2338 31.9442 6 28.0 8.2119 31.9791 7 29.0 8.1614 32.0186 7 30.0 8.0145 32.1160 9 31.0 7.9851 32.2008 4