*2013/12/16 15:36:39.04 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2011/06/23 18:50:08.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 46 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 82560FE1 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 3.1 47.92667 2 Temperature 'deg C (ITS90)' 7.7502 11.58125 3 Salinity:T0:C0 PSS-78 31.267 32.40458 4 Number_of_bin_records n/a 4 7 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-37\Pro $END *ADMINISTRATION MISSION : 2011-37 AGENCY : PBS, Salmon and Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : Viking Storm *LOCATION GEOGRAPHIC AREA : WCVI / BC Inlets STATION : T05 EVENT NUMBER : 164 LATITUDE : 51 0.74000 N ! (deg min) LONGITUDE : 128 52.68000 W ! (deg min) WATER DEPTH : 62 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4076 $REMARKS SOFTWARE VERSION 1.59 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2012/02/06 16:37:54 945 945 MERGEHDR 1.1 2012/02/06 17:12:49 945 945 SHIFTDAT 3.4 2012/02/07 10:08:12 945 945 CALIB 11.7 2012/02/07 14:05:05 945 945 DELETE 6.3 2012/02/07 14:15:44 945 341 CLIP 1.3 2012/02/07 14:17:35 341 300 CTDEDIT 4.61 2012/02/08 13:54:23 300 275 BINAVE 4.1.1 2012/02/09 15:26:08 275 46 REMOVECH 8.1.1 2012/02/09 16:24:38 46 46 HDREDIT2 2.5.1 2012/02/09 16:46:42 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:36:39 46 46 $END $REMARKS -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -1.80 Salinity was recalculated after shift -CALIB parameters: 2012/02/07 14:05:05 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.1800000E+01 0.1000000E+01 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 38.43 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -CTDEDIT 2012/02/08 13:54:23 25 records were deleted in this editing session. 98 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2012/02/09 16:24:38 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Flag -HEADER EDITS: 2012/02/09 16:46:42 Applied edit header: P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-HDR-SBE19.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 3: Salinity:Practical:T0:C0 [PSS-78] Name: Salinity:T0:C0 ==> Salinity:Practical:T0:C0 $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\HighSeaSalmon\Desktop\HS201137\CTD DATA\T 05-164.hex Software Version 1.59 Temperature SN = 4076 Conductivity SN = 4076 System UpLoad Time = Jun 23 2011 18:31:01 HS201137 F/V VIKING STORM T05 ds SeacatPlus V 1.1a SERIAL NO. 4076 24 Jun 2011 01:24:12 vbatt = 11.9, vlith = 8.4, ioper = 62.7 ma, ipump = 91.3 ma, status = not logging number of scans to average = 1 samples = 13747, free = 748853, casts = 8 mode = profile, minimum cond freq = 3137, pump delay = 40 sec ignore magnetic switch = no battery type = ALKALINE, battery cutoff = 7.5 volts pressure sensor = strain gauge, range = 1450.0 SBE 38 = no, Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = n o output format = raw HEX S> SeacatPlus V 1.1a SERIAL NO. 4076 24 Jun 2011 01:24:20 temperature: 27-mar-10 TA0 = 1.259230e-03 TA1 = 2.589226e-04 TA2 = 4.147257e-07 TA3 = 1.392599e-07 TOFFSET = 0.000000e+00 conductivity: 27-mar-10 G = -1.048555e+00 H = 1.515496e-01 I = -4.256497e-04 J = 5.350216e-05 CF0 = 2.637008e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 613, range = 1450 psia: 25-mar-10 PA0 = 6.334072e-01 PA1 = 4.423796e-03 PA2 = -1.693695e-11 PTCA0 = 5.212516e+05 PTCA1 = 1.141998e+01 PTCA2 = -2.199784e-01 PTCB0 = 2.486088e+01 PTCB1 = -6.250001e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -5.700636e+01 PTEMPA1 = 5.248906e+01 PTEMPA2 = -3.786838e-02 POFFSET = 0.000000e+00 volt 0: offset = -4.811000e-02, slope = 1.249733e+00 volt 1: offset = -4.786667e-02, slope = 1.249396e+00 volt 2: offset = -4.786667e-02, slope = 1.251271e+00 volt 3: offset = -4.782667e-02, slope = 1.249709e+00 EXTFREQSF = 1.000114e+00 dh cast 4 23 Jun 2011 18:50:08 samples 6311 to 7255, avg = 1, stop = mag switch S> # nquan = 7 # nvalues = 945 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity, Practical [PSU] # name 6 = flag: flag # span 0 = 1, 945 # span 1 = -2.169, 46.633 # span 2 = 7.7081, 16.7960 # span 3 = 0.043505, 3.703187 # span 4 = -1.601, 1.449 # span 5 = 0.2512, 32.4487 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Jun 23 2011 18:50:08 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 4076 # 27-Mar-10 # 1.25923000e-003 # 2.58922600e-004 # 4.14725700e-007 # 1.39259900e-007 # 1.00000000 # 0.0000 # # # # # # 4076 # 27-Mar-10 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -1.04855500e+000 # 1.51549600e-001 # -4.25649700e-004 # 5.35021500e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 4076 # 25-Mar-10 # 6.33407207e-001 # 4.42379573e-003 # -1.69369473e-011 # -5.70063579e+001 # 5.24890589e+001 # -3.78683798e-002 # 5.21251625e+005 # 1.14199848e+001 # -2.19978366e-001 # 2.48608750e+001 # -6.25000000e-004 # 0.00000000e+000 # 0.000000 # # # # datcnv_date = Feb 06 2012 15:53:18, 7.21d [datcnv_vars = 5] # datcnv_in = P:\Cruise_Data_Processing\2011-37\RAW\CTD\renamed files\2011-37-01 64.hex P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # datcnv_skipover = 0 # filter_date = Feb 06 2012 16:30:54, 7.21d # filter_in = P:\Cruise_Data_Processing\2011-37\Processing\convert\2011-37-0164. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Feb 06 2012 16:33:37, 7.21d [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2011-37\Processing\filter\2011-37-0164.c nv P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # file_type = ascii END* CTDEDIT was used to clean salinity and to remove records from the top and bottom of the cast. Data Processing Notes: Salinity samples were available from near 10m, but the exact depth of firing is impossible to determine. The comparison of CTD salinity with those samples suggests there was no significant drift in calibration. Errors due to mismatch of conductivity and temperature lead to errors on the order of +/-0.005psu. For details on the processing see processing report: 2011-37-proc.doc. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- ------- ---- ------ ------------ Pressure dbars 10 -99 () (1.8 1) $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 3.0 11.5812 31.2670 4 4.0 11.0491 31.3363 6 5.0 10.6627 31.3897 6 6.0 10.5832 31.3892 6 7.0 10.4695 31.3976 5 8.0 10.2212 31.4407 6 9.0 10.0760 31.4713 5 10.0 9.7672 31.5376 5 11.0 9.5605 31.5870 6 12.0 9.4397 31.6027 6 13.0 9.3567 31.6086 6 14.0 9.2769 31.6141 6 15.0 9.1342 31.6322 5 16.0 9.0806 31.6583 5 17.0 9.1381 31.6742 6 18.0 9.1432 31.6849 7 19.0 9.1014 31.6874 6 20.0 9.0523 31.6974 5 21.0 9.0524 31.7144 5 22.0 9.0854 31.7243 6 23.0 9.0135 31.7471 7 24.0 8.9402 31.7664 7 25.0 8.9065 31.7725 6 26.0 8.8758 31.7769 6 27.0 8.8549 31.7788 5 28.0 8.8229 31.7866 6 29.0 8.8034 31.7885 7 30.0 8.7759 31.7933 6 31.0 8.7652 31.7947 6 32.0 8.7544 31.7976 5 33.0 8.7338 31.8046 6 34.0 8.7098 31.8151 7 35.0 8.7078 31.8161 7 36.0 8.6974 31.8193 5 37.0 8.6809 31.8265 6 38.0 8.6696 31.8315 7 39.0 8.6609 31.8348 6 40.0 8.6490 31.8403 6 41.0 8.6324 31.8515 7 42.0 8.6128 31.8693 6 43.0 8.5366 31.9212 6 44.0 8.2333 32.0950 7 45.0 8.0661 32.1732 7 46.0 8.0040 32.2033 7 47.0 7.8365 32.3309 6 48.0 7.7502 32.4046 6