*2013/12/16 15:36:38.98 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2011/06/23 15:28:30.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 97 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 9DA879BD NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.4 99.078 2 Temperature 'deg C (ITS90)' 7.59864 10.7032 3 Salinity:T0:C0 PSS-78 31.5576 33.00112 4 Number_of_bin_records n/a 2 15 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-37\Pro $END *ADMINISTRATION MISSION : 2011-37 AGENCY : PBS, Salmon and Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : Viking Storm *LOCATION GEOGRAPHIC AREA : WCVI / BC Inlets STATION : T07 EVENT NUMBER : 158 LATITUDE : 50 49.51000 N ! (deg min) LONGITUDE : 129 14.32300 W ! (deg min) WATER DEPTH : 110 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4076 $REMARKS SOFTWARE VERSION 1.59 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2012/02/06 16:37:54 1566 1566 MERGEHDR 1.1 2012/02/06 17:12:49 1566 1566 SHIFTDAT 3.4 2012/02/07 10:08:12 1566 1566 CALIB 11.7 2012/02/07 14:05:05 1566 1566 DELETE 6.3 2012/02/07 14:15:44 1566 670 CLIP 1.3 2012/02/07 14:17:35 670 636 CTDEDIT 4.61 2012/02/07 17:36:18 636 607 BINAVE 4.1.1 2012/02/09 15:26:08 607 97 REMOVECH 8.1.1 2012/02/09 16:24:38 97 97 HDREDIT2 2.5.1 2012/02/09 16:46:42 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:36:38 97 97 $END $REMARKS -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -1.80 Salinity was recalculated after shift -CALIB parameters: 2012/02/07 14:05:05 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.1800000E+01 0.1000000E+01 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 89.41 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -CTDEDIT 2012/02/07 17:36:18 29 records were deleted in this editing session. 81 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2012/02/09 16:24:38 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Flag -HEADER EDITS: 2012/02/09 16:46:42 Applied edit header: P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-HDR-SBE19.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 3: Salinity:Practical:T0:C0 [PSS-78] Name: Salinity:T0:C0 ==> Salinity:Practical:T0:C0 $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\HighSeaSalmon\Desktop\HS201137\CTD DATA\T 07-158.hex Software Version 1.59 Temperature SN = 4076 Conductivity SN = 4076 System UpLoad Time = Jun 23 2011 18:28:25 HS201137 F/V VIKING STORM T07 ds SeacatPlus V 1.1a SERIAL NO. 4076 24 Jun 2011 01:21:41 vbatt = 11.9, vlith = 8.4, ioper = 62.6 ma, ipump = 91.5 ma, status = not logging number of scans to average = 1 samples = 13747, free = 748853, casts = 8 mode = profile, minimum cond freq = 3137, pump delay = 40 sec ignore magnetic switch = no battery type = ALKALINE, battery cutoff = 7.5 volts pressure sensor = strain gauge, range = 1450.0 SBE 38 = no, Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = n o output format = raw HEX S> SeacatPlus V 1.1a SERIAL NO. 4076 24 Jun 2011 01:21:47 temperature: 27-mar-10 TA0 = 1.259230e-03 TA1 = 2.589226e-04 TA2 = 4.147257e-07 TA3 = 1.392599e-07 TOFFSET = 0.000000e+00 conductivity: 27-mar-10 G = -1.048555e+00 H = 1.515496e-01 I = -4.256497e-04 J = 5.350216e-05 CF0 = 2.637008e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 613, range = 1450 psia: 25-mar-10 PA0 = 6.334072e-01 PA1 = 4.423796e-03 PA2 = -1.693695e-11 PTCA0 = 5.212516e+05 PTCA1 = 1.141998e+01 PTCA2 = -2.199784e-01 PTCB0 = 2.486088e+01 PTCB1 = -6.250001e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -5.700636e+01 PTEMPA1 = 5.248906e+01 PTEMPA2 = -3.786838e-02 POFFSET = 0.000000e+00 volt 0: offset = -4.811000e-02, slope = 1.249733e+00 volt 1: offset = -4.786667e-02, slope = 1.249396e+00 volt 2: offset = -4.786667e-02, slope = 1.251271e+00 volt 3: offset = -4.782667e-02, slope = 1.249709e+00 EXTFREQSF = 1.000114e+00 dh cast 2 23 Jun 2011 15:28:30 samples 3726 to 5291, avg = 1, stop = mag switch S> # nquan = 7 # nvalues = 1566 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity, Practical [PSU] # name 6 = flag: flag # span 0 = 1, 1566 # span 1 = -2.046, 97.611 # span 2 = 7.5889, 14.0960 # span 3 = 0.072463, 3.620123 # span 4 = -1.323, 1.828 # span 5 = 0.4539, 33.0130 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Jun 23 2011 15:28:30 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 4076 # 27-Mar-10 # 1.25923000e-003 # 2.58922600e-004 # 4.14725700e-007 # 1.39259900e-007 # 1.00000000 # 0.0000 # # # # # # 4076 # 27-Mar-10 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -1.04855500e+000 # 1.51549600e-001 # -4.25649700e-004 # 5.35021500e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 4076 # 25-Mar-10 # 6.33407207e-001 # 4.42379573e-003 # -1.69369473e-011 # -5.70063579e+001 # 5.24890589e+001 # -3.78683798e-002 # 5.21251625e+005 # 1.14199848e+001 # -2.19978366e-001 # 2.48608750e+001 # -6.25000000e-004 # 0.00000000e+000 # 0.000000 # # # # datcnv_date = Feb 06 2012 15:53:17, 7.21d [datcnv_vars = 5] # datcnv_in = P:\Cruise_Data_Processing\2011-37\RAW\CTD\renamed files\2011-37-01 58.hex P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # datcnv_skipover = 0 # filter_date = Feb 06 2012 16:30:54, 7.21d # filter_in = P:\Cruise_Data_Processing\2011-37\Processing\convert\2011-37-0158. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Feb 06 2012 16:33:37, 7.21d [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2011-37\Processing\filter\2011-37-0158.c nv P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # file_type = ascii END* The descent rate of the CTD was noisy with some complete reversals of direction. CTDEDIT was used to clean salinity and to remove records corrupted by shed wakes. Data Processing Notes: Salinity samples were available from near 10m, but the exact depth of firing is impossible to determine. The comparison of CTD salinity with those samples suggests there was no significant drift in calibration. Errors due to mismatch of conductivity and temperature lead to errors on the order of +/-0.005psu. For details on the processing see processing report: 2011-37-proc.doc. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- ------- ---- ------ ------------ Pressure dbars 10 -99 () (1.8 1) $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.0 10.7032 31.5576 2 2.0 10.6279 31.5682 11 3.0 10.6312 31.5662 7 4.0 10.6057 31.5768 5 5.0 10.6041 31.5836 6 6.0 10.6001 31.5851 6 7.0 10.5580 31.5808 5 8.0 10.4356 31.5920 6 9.0 10.2887 31.6080 5 10.0 10.1122 31.6462 7 11.0 9.9993 31.6732 5 12.0 9.9201 31.7032 5 13.0 9.8981 31.7103 5 14.0 9.8810 31.7146 6 15.0 9.8553 31.7213 7 16.0 9.8454 31.7206 6 17.0 9.8099 31.7184 5 18.0 9.7828 31.7212 5 19.0 9.7875 31.7239 6 20.0 9.7975 31.7224 7 21.0 9.7947 31.7222 5 22.0 9.7634 31.7270 5 23.0 9.6352 31.7552 5 25.0 9.5572 31.7738 3 26.0 9.4352 31.8352 6 27.0 9.3926 31.8587 6 28.0 9.3946 31.8694 6 29.0 9.3626 31.8939 6 30.0 9.3141 31.9054 6 31.0 9.2308 31.9305 6 32.0 9.2531 31.9365 6 33.0 9.2696 31.9451 5 34.0 9.2575 31.9523 8 35.0 9.2500 31.9541 6 36.0 9.2249 31.9623 5 37.0 9.2131 31.9667 7 38.0 9.2157 31.9647 7 39.0 9.2063 31.9670 5 40.0 9.1759 31.9793 5 41.0 9.1718 31.9804 7 42.0 9.1705 31.9796 6 43.0 9.1624 31.9785 6 44.0 9.1349 31.9830 6 45.0 9.1256 31.9810 6 46.0 9.1108 31.9836 6 47.0 9.1058 31.9841 6 48.0 9.1057 31.9845 7 49.0 9.1040 31.9878 5 51.0 9.0960 31.9911 6 52.0 9.0950 31.9901 7 53.0 9.0910 31.9951 6 54.0 9.1077 31.9986 6 55.0 9.1134 32.0014 6 56.0 9.1130 32.0039 7 57.0 9.1166 32.0040 6 58.0 9.0975 32.0042 5 59.0 9.0151 32.0218 6 60.0 8.9210 32.0546 7 61.0 8.9098 32.0566 7 62.0 8.8926 32.0666 6 63.0 8.8896 32.0726 5 64.0 8.8876 32.0878 5 65.0 8.8899 32.1053 8 66.0 8.8818 32.1149 7 67.0 8.8412 32.1294 6 68.0 8.8016 32.1451 6 69.0 8.7773 32.1453 6 70.0 8.7436 32.1488 6 71.0 8.7135 32.1549 8 72.0 8.6944 32.1605 7 73.0 8.6591 32.1814 6 74.0 8.5847 32.2350 6 75.0 8.5503 32.2574 7 76.0 8.5063 32.2841 7 77.0 8.4768 32.3027 7 78.0 8.4613 32.3082 6 79.0 8.4298 32.3243 6 80.0 8.4005 32.3399 8 81.0 8.3446 32.3680 7 82.0 8.2574 32.4223 7 83.0 8.2132 32.4510 6 84.0 8.1936 32.4627 6 85.0 8.1231 32.5204 8 86.0 8.1117 32.5309 8 87.0 8.0826 32.5513 6 88.0 8.0518 32.5802 6 89.0 8.0344 32.6016 7 90.0 7.9954 32.6403 7 91.0 7.8778 32.7483 7 92.0 7.7427 32.8722 6 93.0 7.6401 32.9675 5 94.0 7.6150 32.9890 6 95.0 7.6045 32.9980 8 96.0 7.6034 32.9976 7 97.0 7.6020 32.9972 6 98.0 7.5990 33.0003 7 99.0 7.5986 33.0011 15