*2013/12/16 15:36:38.90 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2011/06/23 01:29:19.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 63 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 943A23E6 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 3.026667 64.692 2 Temperature 'deg C (ITS90)' 7.791 11.76178 3 Salinity:T0:C0 PSS-78 31.7865 32.9251 4 Number_of_bin_records n/a 2 8 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-37\Pro $END *ADMINISTRATION MISSION : 2011-37 AGENCY : PBS, Salmon and Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : Viking Storm *LOCATION GEOGRAPHIC AREA : WCVI / BC Inlets STATION : VI26 EVENT NUMBER : 152 LATITUDE : 50 37.96000 N ! (deg min) LONGITUDE : 128 24.57000 W ! (deg min) WATER DEPTH : 74 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4076 $REMARKS SOFTWARE VERSION 1.59 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2012/02/06 16:37:53 1137 1137 MERGEHDR 1.1 2012/02/06 17:12:49 1137 1137 SHIFTDAT 3.4 2012/02/07 10:08:12 1137 1137 CALIB 11.7 2012/02/07 14:05:05 1137 1137 DELETE 6.3 2012/02/07 14:15:43 1137 452 CLIP 1.3 2012/02/07 14:17:34 452 409 CTDEDIT 4.61 2012/02/07 17:24:55 409 379 BINAVE 4.1.1 2012/02/09 15:26:08 379 63 REMOVECH 8.1.1 2012/02/09 16:24:38 63 63 HDREDIT2 2.5.1 2012/02/09 16:46:42 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:36:38 63 63 $END $REMARKS -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -1.80 Salinity was recalculated after shift -CALIB parameters: 2012/02/07 14:05:05 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.1800000E+01 0.1000000E+01 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 54.95 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -CTDEDIT 2012/02/07 17:24:55 30 records were deleted in this editing session. 43 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2012/02/09 16:24:38 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Flag -HEADER EDITS: 2012/02/09 16:46:42 Applied edit header: P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-HDR-SBE19.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 3: Salinity:Practical:T0:C0 [PSS-78] Name: Salinity:T0:C0 ==> Salinity:Practical:T0:C0 $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\HighSeaSalmon\Desktop\HS201137\CTD DATA\V I26-152.hex Software Version 1.59 Temperature SN = 4076 Conductivity SN = 4076 System UpLoad Time = Jun 22 2011 20:09:00 HS201137 F/V VIKING STORM VI26 ds SeacatPlus V 1.1a SERIAL NO. 4076 23 Jun 2011 03:02:07 vbatt = 11.9, vlith = 8.4, ioper = 62.6 ma, ipump = 92.8 ma, status = not logging number of scans to average = 1 samples = 17740, free = 744860, casts = 8 mode = profile, minimum cond freq = 3137, pump delay = 40 sec ignore magnetic switch = no battery type = ALKALINE, battery cutoff = 7.5 volts pressure sensor = strain gauge, range = 1450.0 SBE 38 = no, Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = n o output format = raw HEX S> SeacatPlus V 1.1a SERIAL NO. 4076 23 Jun 2011 03:02:15 temperature: 27-mar-10 TA0 = 1.259230e-03 TA1 = 2.589226e-04 TA2 = 4.147257e-07 TA3 = 1.392599e-07 TOFFSET = 0.000000e+00 conductivity: 27-mar-10 G = -1.048555e+00 H = 1.515496e-01 I = -4.256497e-04 J = 5.350216e-05 CF0 = 2.637008e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 613, range = 1450 psia: 25-mar-10 PA0 = 6.334072e-01 PA1 = 4.423796e-03 PA2 = -1.693695e-11 PTCA0 = 5.212516e+05 PTCA1 = 1.141998e+01 PTCA2 = -2.199784e-01 PTCB0 = 2.486088e+01 PTCB1 = -6.250001e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -5.700636e+01 PTEMPA1 = 5.248906e+01 PTEMPA2 = -3.786838e-02 POFFSET = 0.000000e+00 volt 0: offset = -4.811000e-02, slope = 1.249733e+00 volt 1: offset = -4.786667e-02, slope = 1.249396e+00 volt 2: offset = -4.786667e-02, slope = 1.251271e+00 volt 3: offset = -4.782667e-02, slope = 1.249709e+00 EXTFREQSF = 1.000114e+00 dh cast 8 23 Jun 2011 01:29:19 samples 16604 to 17740, avg = 1, stop = mag swit ch S> # nquan = 7 # nvalues = 1137 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity, Practical [PSU] # name 6 = flag: flag # span 0 = 1, 1137 # span 1 = -2.124, 63.146 # span 2 = 7.7891, 15.8146 # span 3 = 0.045267, 3.714717 # span 4 = -1.507, 1.418 # span 5 = 0.2677, 32.9298 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Jun 23 2011 01:29:19 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 4076 # 27-Mar-10 # 1.25923000e-003 # 2.58922600e-004 # 4.14725700e-007 # 1.39259900e-007 # 1.00000000 # 0.0000 # # # # # # 4076 # 27-Mar-10 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -1.04855500e+000 # 1.51549600e-001 # -4.25649700e-004 # 5.35021500e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 4076 # 25-Mar-10 # 6.33407207e-001 # 4.42379573e-003 # -1.69369473e-011 # -5.70063579e+001 # 5.24890589e+001 # -3.78683798e-002 # 5.21251625e+005 # 1.14199848e+001 # -2.19978366e-001 # 2.48608750e+001 # -6.25000000e-004 # 0.00000000e+000 # 0.000000 # # # # datcnv_date = Feb 06 2012 15:53:15, 7.21d [datcnv_vars = 5] # datcnv_in = P:\Cruise_Data_Processing\2011-37\RAW\CTD\renamed files\2011-37-01 52.hex P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # datcnv_skipover = 0 # filter_date = Feb 06 2012 16:30:54, 7.21d # filter_in = P:\Cruise_Data_Processing\2011-37\Processing\convert\2011-37-0152. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Feb 06 2012 16:33:36, 7.21d [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2011-37\Processing\filter\2011-37-0152.c nv P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # file_type = ascii END* CTDEDIT was used to clean salinity and to remove a few records corrupted by shed wakes. Data Processing Notes: Salinity samples were available from near 10m, but the exact depth of firing is impossible to determine. The comparison of CTD salinity with those samples suggests there was no significant drift in calibration. Errors due to mismatch of conductivity and temperature lead to errors on the order of +/-0.005psu. For details on the processing see processing report: 2011-37-proc.doc. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- ------- ---- ------ ------------ Pressure dbars 10 -99 () (1.8 1) $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 3.0 11.7592 31.7980 6 4.0 11.7618 31.7956 6 5.0 11.6934 31.7901 5 6.0 11.4383 31.7942 7 7.0 11.3342 31.7961 4 8.0 11.1240 31.7865 2 9.0 10.7262 31.8026 5 10.0 10.4249 31.8183 6 11.0 10.3434 31.8255 6 12.0 10.2928 31.8256 6 13.0 10.1891 31.8266 6 14.0 10.0254 31.8240 5 15.0 9.7207 31.8671 6 16.0 9.4998 31.9060 5 17.0 9.4097 31.9179 5 18.0 9.3380 31.9402 7 19.0 9.3124 31.9446 7 20.0 9.2840 31.9646 5 21.0 9.2510 31.9788 6 22.0 9.1715 32.0170 5 23.0 9.0702 32.0488 7 24.0 9.0637 32.0463 7 25.0 9.0397 32.0460 5 26.0 8.9903 32.0499 5 27.0 8.9516 32.0537 6 28.0 8.9296 32.0634 6 29.0 8.9111 32.0742 6 30.0 8.8947 32.0904 6 31.0 8.8955 32.0936 7 32.0 8.8809 32.0984 5 33.0 8.7973 32.1427 6 34.0 8.7046 32.1985 7 35.0 8.6912 32.2014 6 36.0 8.6503 32.2229 7 37.0 8.6151 32.2394 5 38.0 8.5597 32.2712 6 39.0 8.5115 32.3161 6 40.0 8.5043 32.3344 7 41.0 8.4923 32.3394 6 42.0 8.4734 32.3524 6 43.0 8.4444 32.3700 6 44.0 8.4004 32.3901 7 45.0 8.3899 32.3976 6 46.0 8.3763 32.4158 6 47.0 8.3701 32.4290 6 48.0 8.3217 32.4588 6 49.0 8.2787 32.4900 7 50.0 8.2630 32.5127 7 51.0 8.2557 32.5673 6 52.0 8.2481 32.6029 6 53.0 8.2564 32.6170 7 54.0 8.2587 32.6175 8 55.0 8.2450 32.6244 6 56.0 8.2088 32.6459 6 57.0 8.1670 32.6759 6 58.0 8.1549 32.6877 7 59.0 8.1442 32.6913 6 60.0 8.0907 32.7129 5 61.0 7.9758 32.7770 7 62.0 7.8874 32.8420 6 63.0 7.8621 32.8649 7 64.0 7.8189 32.9007 8 65.0 7.7910 32.9251 5