*2013/12/16 15:36:38.73 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2011/06/22 17:07:58.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 71 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : B24A8438 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.160588 71.099 2 Temperature 'deg C (ITS90)' 7.76939 11.91664 3 Salinity:T0:C0 PSS-78 31.61708 32.92422 4 Number_of_bin_records n/a 1 17 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-37\Pro $END *ADMINISTRATION MISSION : 2011-37 AGENCY : PBS, Salmon and Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : Viking Storm *LOCATION GEOGRAPHIC AREA : WCVI / BC Inlets STATION : VI22 EVENT NUMBER : 140 LATITUDE : 50 21.46000 N ! (deg min) LONGITUDE : 128 5.77000 W ! (deg min) WATER DEPTH : 79 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4076 $REMARKS SOFTWARE VERSION 1.59 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2012/02/06 16:37:52 1184 1184 MERGEHDR 1.1 2012/02/06 17:12:48 1184 1184 SHIFTDAT 3.4 2012/02/07 10:08:11 1184 1184 CALIB 11.7 2012/02/07 14:05:03 1184 1184 DELETE 6.3 2012/02/07 14:15:42 1184 473 CLIP 1.3 2012/02/07 14:17:34 473 434 CTDEDIT 4.61 2012/02/07 16:37:34 434 419 BINAVE 4.1.1 2012/02/09 15:26:08 419 71 REMOVECH 8.1.1 2012/02/09 16:24:38 71 71 HDREDIT2 2.5.1 2012/02/09 16:46:42 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:36:38 71 71 $END $REMARKS -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -1.80 Salinity was recalculated after shift -CALIB parameters: 2012/02/07 14:05:03 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.1800000E+01 0.1000000E+01 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 61.41 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -CTDEDIT 2012/02/07 16:37:34 15 records were deleted in this editing session. 51 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2012/02/09 16:24:38 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Flag -HEADER EDITS: 2012/02/09 16:46:42 Applied edit header: P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-HDR-SBE19.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 3: Salinity:Practical:T0:C0 [PSS-78] Name: Salinity:T0:C0 ==> Salinity:Practical:T0:C0 $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\HighSeaSalmon\Desktop\HS201137\CTD DATA\V I22-140.hex Software Version 1.59 Temperature SN = 4076 Conductivity SN = 4076 System UpLoad Time = Jun 22 2011 20:01:08 HS201137 F/V VIKING STORM VI22 ds SeacatPlus V 1.1a SERIAL NO. 4076 23 Jun 2011 02:54:14 vbatt = 12.0, vlith = 8.4, ioper = 62.6 ma, ipump = 92.6 ma, status = not logging number of scans to average = 1 samples = 17740, free = 744860, casts = 8 mode = profile, minimum cond freq = 3137, pump delay = 40 sec ignore magnetic switch = no battery type = ALKALINE, battery cutoff = 7.5 volts pressure sensor = strain gauge, range = 1450.0 SBE 38 = no, Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = n o output format = raw HEX S> SeacatPlus V 1.1a SERIAL NO. 4076 23 Jun 2011 02:54:23 temperature: 27-mar-10 TA0 = 1.259230e-03 TA1 = 2.589226e-04 TA2 = 4.147257e-07 TA3 = 1.392599e-07 TOFFSET = 0.000000e+00 conductivity: 27-mar-10 G = -1.048555e+00 H = 1.515496e-01 I = -4.256497e-04 J = 5.350216e-05 CF0 = 2.637008e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 613, range = 1450 psia: 25-mar-10 PA0 = 6.334072e-01 PA1 = 4.423796e-03 PA2 = -1.693695e-11 PTCA0 = 5.212516e+05 PTCA1 = 1.141998e+01 PTCA2 = -2.199784e-01 PTCB0 = 2.486088e+01 PTCB1 = -6.250001e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -5.700636e+01 PTEMPA1 = 5.248906e+01 PTEMPA2 = -3.786838e-02 POFFSET = 0.000000e+00 volt 0: offset = -4.811000e-02, slope = 1.249733e+00 volt 1: offset = -4.786667e-02, slope = 1.249396e+00 volt 2: offset = -4.786667e-02, slope = 1.251271e+00 volt 3: offset = -4.782667e-02, slope = 1.249709e+00 EXTFREQSF = 1.000114e+00 dh cast 4 22 Jun 2011 17:07:58 samples 6825 to 8008, avg = 1, stop = mag switch S> # nquan = 7 # nvalues = 1184 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity, Practical [PSU] # name 6 = flag: flag # span 0 = 1, 1184 # span 1 = -2.013, 69.613 # span 2 = 7.7265, 11.9171 # span 3 = 0.055526, 3.643777 # span 4 = -1.978, 1.682 # span 5 = 0.3690, 32.9694 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Jun 22 2011 17:07:58 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 4076 # 27-Mar-10 # 1.25923000e-003 # 2.58922600e-004 # 4.14725700e-007 # 1.39259900e-007 # 1.00000000 # 0.0000 # # # # # # 4076 # 27-Mar-10 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -1.04855500e+000 # 1.51549600e-001 # -4.25649700e-004 # 5.35021500e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 4076 # 25-Mar-10 # 6.33407207e-001 # 4.42379573e-003 # -1.69369473e-011 # -5.70063579e+001 # 5.24890589e+001 # -3.78683798e-002 # 5.21251625e+005 # 1.14199848e+001 # -2.19978366e-001 # 2.48608750e+001 # -6.25000000e-004 # 0.00000000e+000 # 0.000000 # # # # datcnv_date = Feb 06 2012 15:53:13, 7.21d [datcnv_vars = 5] # datcnv_in = P:\Cruise_Data_Processing\2011-37\RAW\CTD\renamed files\2011-37-01 40.hex P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # datcnv_skipover = 0 # filter_date = Feb 06 2012 16:30:53, 7.21d # filter_in = P:\Cruise_Data_Processing\2011-37\Processing\convert\2011-37-0140. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Feb 06 2012 16:33:36, 7.21d [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2011-37\Processing\filter\2011-37-0140.c nv P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # file_type = ascii END* The descent rate of the CTD was noisy with some complete reversals of direction. CTDEDIT was used to clean salinity and to remove records corrupted by shed wakes. Data Processing Notes: Salinity samples were available from near 10m, but the exact depth of firing is impossible to determine. The comparison of CTD salinity with those samples suggests there was no significant drift in calibration. Errors due to mismatch of conductivity and temperature lead to errors on the order of +/-0.005psu. For details on the processing see processing report: 2011-37-proc.doc. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- ------- ---- ------ ------------ Pressure dbars 10 -99 () (1.8 1) $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.0 11.9155 31.6180 17 2.0 11.9166 31.6171 9 3.0 11.9143 31.6185 6 4.0 11.8914 31.6317 6 5.0 11.8498 31.6533 6 6.0 11.7998 31.6788 5 7.0 11.7904 31.6802 5 8.0 11.7804 31.6799 6 9.0 11.7578 31.6853 5 10.0 11.7285 31.6842 7 11.0 11.6708 31.6849 6 12.0 11.5435 31.6837 5 13.0 11.3188 31.6852 5 14.0 11.1046 31.7076 6 15.0 10.8661 31.7332 6 16.0 10.6621 31.7333 6 17.0 10.3870 31.7326 5 18.0 10.0637 31.7697 5 19.0 9.8900 31.7842 6 20.0 9.6816 31.8084 5 21.0 9.5138 31.8622 6 22.0 9.5027 31.8799 5 23.0 9.5044 31.8861 6 24.0 9.4713 31.9025 6 25.0 9.4725 31.9089 5 26.0 9.4495 31.9207 5 27.0 9.3386 31.9487 6 28.0 9.1008 32.0044 6 29.0 9.0364 32.0144 6 30.0 8.8419 32.0825 6 31.0 8.7864 32.1103 5 32.0 8.7840 32.1070 6 33.0 8.7730 32.1041 5 34.0 8.7040 32.1342 5 35.0 8.6185 32.1727 6 36.0 8.5828 32.1886 7 37.0 8.5688 32.1931 6 38.0 8.5232 32.2225 5 39.0 8.5276 32.2279 5 40.0 8.5329 32.2328 7 41.0 8.5338 32.2455 5 42.0 8.5177 32.2551 6 43.0 8.4824 32.2661 6 44.0 8.4496 32.2758 5 45.0 8.4053 32.2976 7 46.0 8.4058 32.2971 7 47.0 8.3889 32.3073 5 48.0 8.3195 32.3646 5 49.0 8.2039 32.4585 5 50.0 8.1107 32.5311 7 51.0 8.0896 32.5482 7 52.0 8.0530 32.5713 6 53.0 8.0120 32.6090 5 54.0 7.9864 32.6572 5 55.0 7.9570 32.7291 6 56.0 7.9468 32.7547 7 57.0 7.9535 32.7529 7 58.0 7.9495 32.7544 5 59.0 7.9441 32.7626 5 60.0 7.9409 32.7718 5 61.0 7.9353 32.7850 6 62.0 7.9319 32.7939 2 63.0 7.9215 32.8055 6 64.0 7.8776 32.8401 6 65.0 7.8770 32.8411 6 66.0 7.8838 32.8365 5 67.0 7.8663 32.8464 6 68.0 7.8463 32.8586 7 69.0 7.8430 32.8617 1 70.0 7.8265 32.8732 7 71.0 7.7694 32.9242 10